Basic Input/Output w/ NetBeans 4.1

I recently switched to NetBeans 4.1 from 3.6 and now I am unable to run any of
my classes requiring basic user input. In version 3.6 input was working fine, as
expected. Now, when I run simple classes to test user input, null is
automatically entered, without pausing to prompt me for input at all. I have
used NetBeans 4.1 successfully with input on other computers, so I have no idea
what the problem is now. I am getting NullPointerExceptions all over the place.
Any ideas? Thanks.

Thanks! Console input now partially works w/ patch from that bug report. The only issue now is that the input box comes up before the input prompt is even printed. I have searched a bit for a resolution to this issue but have not found anything so far. I am sure, though, that many users must have had this problem, so I will keep looking in bug reports on the netbeans site.
Thanks again for the help.

Similar Messages

  • Error loading BASIC document. General Error. General input/output error".

    Error loading BASIC document. General Error. General input/output error".

    I guess your problem is related to StarOffice8, right?
    I had the same issue after upgrading StarOffice7 to StarOffice8:
    http://forum.java.sun.com/thread.jspa?threadID=5287604&tstart=0
    Apparently the .StarOffice8 directory in your export/home directory was created based on .StarOffice7
    directory. Probably here something went wrong. Maybe a bug.
    So the solution is very simple:
    rm -r .StarOffice8 in your export/home directory and restart StarOffice8.
    Or you can also rename the directory.

  • How to execute function takes user defined type parameters as input &output

    Hi All,
    I want to execute a function which takes user defined type as input & output parameters. But i don't know how to execute that function in pl/sql statements.
    CREATE TYPE T_INPUT AS OBJECT
    USER          VARCHAR2(255),
    APPLICATION     VARCHAR2(255),
    REFERENCE          VARCHAR2(30)
    ) NOT FINAL;
    CREATE TYPE T_ID UNDER T_INPUT
    E_ID                    VARCHAR2 (50),
    CODE                    VARCHAR2 (3),
    SERVICE                    VARCHAR2 (10),
    C_TYPE                    VARCHAR2 (1)
    ) NOT FINAL;
    CREATE TYPE T_OUTPUT AS OBJECT
         R_STATUS               NUMBER(10),
         E_DESC_LANG_1          VARCHAR2(1000),
         E_DESC_LANG_2          VARCHAR2(1000),
         A_REFERENCE          VARCHAR2(30)
    ) NOT FINAL;
    CREATE TYPE T_INFO UNDER T_OUTPUT
    E_INFO XMLTYPE
    CREATE FUNCTION Get_Dtls
    I_DETAILS IN T_ID,
    O_DETAILS OUT T_INFO
    RETURN NUMBER AS
    END;
    Here
    1. T_ID is an input parameter which is a combination of T_ID + T_INPUT,
    2. T_INFO is an output parameter which is a combination of T_INFO + T_OUTPUT.
    Here i'll assign the T_ID values.
    --- T_INPUT values
    USER          = "admin";
    APPLICATION     = "test";
    REFERENCE     = "null";
    ---- T_ID values
    E_ID               = "1234";
    CODE               = "TTT";
    SERVICE               = "NEW";
    C_TYPE = "P";
    Now i want to execute Get_Dtls function with T_ID,T_INFO parameters in pl/sql statements.
    I want to catch the E_INFO value from T_INFO type.
    How can i Do this ?
    Pls Help. Thanxs in advance.
    Anil.

    I am very new to this. New to Oracle, PL/SQL, OO programming or testing?
    set serveroutput on
    declare
      tst_obj ctype;
    begin
      tst_obj := pkg.proc(11);
      dbms_output.put_line('id='||tst_obj.id||'::code='||tst_obj.code||'::usage='||tst_obj.usage);
    end;
    /Generally I disapprove of the use of DBMS_OUTPUT (for just about anything) but it is sufficient to demonstrate the basic principle.
    Really you should start using proper testing practices, ideally with an automated test harness like QUTE.
    Cheers, APC
    Blog : http://radiofreetooting.blogspot.com/

  • Frequency sweep input output

    Hi
    Using Labview 7.1 and PCI 6071 DAQmx card i want to design a frequency sweep application. I mean  that i need my analogue output channel to give a sine wave with incremental frequency of 100 Hz step, starting from 10000 Hz untli  100000 Hz (10000 Hz, 10100 Hz...100000 Hz). This wave is applied on a kind of a transformer, and each time the frequency changes, i need an input channel to acquire another also sinus wave coming from this transformer and measure its amplitude, in order to examine its frequency response. So, i came up with the attached vi.
    The problem is, that when "sweeping" takes place ,i get amplitude values between 2 and 6 or even 7 volts something that  can't be happening. I know that the amplitude values i should get are around 2 volts  (+/- 500 mV maximum).
    I think, that the problem should be in some kind of "non-synchronization" of the input-output channels when the vi enters the loop to start changing the frequency.
    Just to be more clear, i need my vi to do these steps in order:1. constantly output the 10000 Hz wave 2. acquire the input wave 3. measure its amplitude 4.transform the frequency into 10100 Hz 5. acquire the input wave 6. measure amplitude  etc... 
    The odd thing is that when i physically connected the output channel with the input one to see if the frequency sweep is done, it worked fine. I mean that i did get in the input channel almost exactly the signal i generated.
    Thanks in advance, and i hope i was not tiringly analytical..
    Attachments:
    sweep3.vi ‏140 KB

    Hi
    Please take a glance at the two attached vi's.
    The first is the one i use in order to generate a steady frequency sinus wave,feed it to my transformer and acquire the also sinus output of the transformer  through my input channel. Using two channels of an external oscilloscope i check and notice that for many frequency values, both sinus waves are steady and noiseless, with the expected amplitude voltages.
    Now, using the second vi, in order to "sweep" the wave and check my transformers amplitude response, then these impossible amplitude "up's and down's" again came up.Again by looking at the oscilloscope's screen i can see the noisy waves tha "confuse" and the oscilloscope and my input channel, and so result in wrong amplitudes.
    Based on the above, i have to assume, that the problem lies in the sweep mechanism design i use. Also, after trying several different ways to sweep, i came to the conclusion, that the problem comes up whenever i use the second Basic Function Generator.vi inside the loop. Could it be that it needs triggering again?
    I'd really use some help, or maybe even ideas for different design approaches for the frequency sweep.
    Thanks in advance
    Attachments:
    Multi-Function-Synch AI-AO3.vi ‏164 KB
    sweep4.vi ‏142 KB

  • Why my Input/output size of backup increased

    I have a following rman backup script
    run {
    backup as compressed backupset incremental level 1 cumulative device type disk tag 'Baan_bkup$LEVEL_0' data
    base;
    recover copy of database;
    backup device type disk tag 'Baan_bkup$LEVEL_0' archivelog all not backed up;
    backup archivelog until time 'sysdate-3' delete all input;
    crosscheck backupset;
    crosscheck archivelog all;
    delete noprompt obsolete;
    delete noprompt expired backup;
    running once daily for almost three weeks. the first 9 days, the input/output sizes were fractional (ex 3G/88M), then it switched to ~16G/1.3G and stayed that level. Because this is test DB server, basically there is no activity on it except the mentainace activity by DB itself.　So how did it happen to cause the size change?　The real backup sets only maintain at 3 days level as the script.　My database size is 16.88G of 10g R2 on RH EL3

    That is the behavior in 9i and 10g1. In 10gR2 things change.
    Unused Block Compression Of Datafile Backups to Backup Sets
    When backing up datafiles into backup sets, RMAN does not back up the contents of data blocks that have never been allocated. (In previous releases, this behavior was referred to as NULL compression.)
    RMAN also skips other datafile blocks that do not currently contain data, if all of the following conditions apply:
    The COMPATIBLE initialization parameter is set to 10.2
    There are currently no guaranteed restore points defined for the database
    The datafile is locally managed
    The datafile is being backed up to a backup set as part of a full backup or a level 0 incremental backup
    The backup set is being created on disk.
    http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta009.htm#RCMRF98765

  • Can't select input output and name media when using MRC1 log and transfer

    I am using a MRC1 from the Sony Z5E to film my media. I downloaded the plugin which allows me to log and transfer through FCP 6.0.6. The only problem is that it does not allow me to input/output and name the pieces of each clip that I want. Hence I can only import the whole clip and am wasting time and space with media that I do not want or need. Is there an additional plugin or setting to pick on FCP to get this feature to work?
    Rich

    Hi xhk, I'm a Kubuntu's user and I've had the same problems. I've been days reading on the Internet about this issue and finally I solve it by following this post from a Spanish tutorial: http://bit.ly/4p3XFq. It worked for me!
    Basically it is:
    1. Get install the needed packages, i.e: sudo apt-get install ibus ibus-pinyin
    2. After installing them, introduce a little code into two files:
    2.1.--> type on your konsole: kate /home/$(whoami)/.bashrc
       a--> add to the bottom of the opened text:
    export GTK_IM_MODULE=ibus
    export XMODIFIERS=@im=ibus
    export QT_IM_MODULE=ibus
       b-->save the changes on the text.
    2.2.--> type again on your konsole: kate /home/$(whoami)/.profile
      b--> repeat 2.1.a. and 2.1.b
    3. Go to main menu - system settings - advance - "autoarranque" (I don't know how it is called in English, "restarting" maybe?) and then "add a programme". Type: ibus-daemon -d, press OK and then rebooth.
    It shall be working by then.
    Last edited by mxd (2013-07-06 01:42:27)

  • External Hard Drive Input/Output error

    I recently started having problems with an external hard drive setup that I did not have problems with prior to upgrading to 10.5.5 and trying to setup the drive to be compatible with Time Machine.
    The hard drive enclosure that I have has 2 bays for two SATA drives. I have used this enclosure without any problems until I tried to get 1 drive to act as the backup drive for Time Machine and the other to be storage. I formatted them using Drive Genius. I used the option for GUILD or GUIL which it said was the better format for using with Time Machine.
    The first problem I ran into since upgrading and reformatting the drives is I got an "input/output" error the first couple times I connected the drive via USB to my Mac. I could still use the drives but I got weird errors every once in a while like "input/output error" or "device was not ejected properly" even though the device had not been unplugged.
    Now the drives will not mount using OS 10.5.5. The drives show up when I open Disk Utility, but I cannot get them to mount. I have ran Disk Utility First Aid, and it says the drives are fine. There is one error that shows up when I run the "Repair Disk" feature. It reads "Invalid content in Journal". But Disk Utility also says "The volume was repaired successfully".
    I have seen some posts when I do a search in google about this issue and it seems this is a known issue. Every suggestion I see says to insert your Tiger DVD and reformat the drive using that and the problem will be solved. The only problem with that is I have a lot of important files on the drive that I cannot lose. I had the files backed up until I moved them to the new drive a while back. Now I do not have a backup because I was in the process of switching to bigger drives and erased the old drives after doing so because everything was working fine.
    I am hoping someone out there may have some suggestions (other than erasing the drive) to get my dives to mount so I can transfer the data off to another drive and reformat after.
    Thanks,
    Paul Rugg

    Thanks for the suggestion.
    Do you think that would work better than Drive Genius? I bought Drive Genius 2 and it does not even see the drives when they are plugged in unlike Disc Utility which can see the drives but cannot mount either one.
    Maybe this following post I made to a different questions may help. The data on the drive is other buying another program for if it will work. I think my next step may be to go over to a friends place and try to mount the drives on his computer and transfer stuff off if they connect.
    text below posted to other question relating to external hard drive problem.
    I have recently had the same mounting issue with my new external hard drive. I just purchased a new 750Gb Western Digital Sata drive and got everything transfered over to it. Immediately, I got an error saying that the drive had been ejected incorrectly even though it was still plugged in. I was a little curious. I restarted the computer (hard drive still plugged in via USB 2.0) and the drive showed up just fine. I plugged another 250Gb drive into the same case (2 bays) and the 250GB drive showed up just fine.
    Well, I then noticed there was an OS upgrade available when I ran Software update so i ran it and when I rebooted the drives were gone. I can see the drives in Disc Utility, but they will not mount. Drive Genius cannot see either disc. Disc Utility says I need to repair the drives, but when I do it says they are fixed but they don not mount.
    The problem really seems to be related to mounting USB external drives. I got ahold of 2 seperate external firewire hard drives and one shows up just fine while the other has the same problem (both work on other systems. I would try wiping the drives and reformatting but ALL MY stuff is on them and not everything has been backed up. Yuck! I have not tried connecting my hard drive to another Mac yet.
    The drives being used are #1 Maxtor Maxline Plus II 250GB SATA/150 HDD 1.5b/s 7Y250m00654ra
    and #2 Western Digital WD7500AACS WD Caviar GP Green Power drive.
    I have another post similar to this and I have not received any feedback, but I have been doing my own searching and have found similar posts on the net.
    Anybody have any clue what might be going on here? It really seems to be related to my upgrade.

  • Text Input/Output

    I have downloaded the text input/output widget found here:
    http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_us&extid=1253 021
    I inserted the input animation on one slide and the output
    animation on another.
    When I preview, the input box doesn't show up. What am I
    doing wrong?
    Thanks in advance for help or advice!

    Hi there
    Likely you are using Captivate 3 and you have upgraded your
    Flash Player to version 10.
    Click
    here to read a thread where I believe one of he Adobe Captivate
    team sheds a bit of light on the issue
    Click here for an Article
    and link for uninstalling Flash Player/Plug In:
    Click here for an Article
    and link for installing and older version of the Flash Player/Plug
    In:
    Version 9 should allow things to work okay with Captivate 3
    Cheers... Rick

  • I am in mavericks disk utility recovery mode as my mac book will not boot up & stays only on the grey apple screen. When I verify the disk I get open error5 :input /output error on Syst stuck on 1 minute pouring out over 50 error messages & still counting

    I am in Mavericks disk utility recovery mode as my mac book pro will not boot up & stays on the Apple grey screen . When I verify disk permissions I get
    Open error 5:"input/ output error" on syst with over 50 of this messages & still counting . Disk Utility says 1 minute
    But this has been going on for over 10 mins .
    I can not verify disk or repair disk .
    I have tried to reinstall mavericks operating system but it says my hard drive is locked which is very strange .
    Does anyone know what is going on here ?
    My system looks like it has been totally corrupted . Thanks Andrew

    Could be. The "lock" isn't actually looking for a password.
    WARNING: This will completely erase the ENTIRE hard drive.
    What you would need to do is boot to recovery > disk utility > select the MAIN drive on the left side > partition > change partition layout from CURRENT to 1 PARTITION > ensure on the right side it says Format : Mac OSX Extended (Journaled) then push APPLY.
    Then if it will allow us, close the windows until you see the 4 options popup again and select "Reinstall Mac OS X" select the Mac HD and you should be good to go!

  • I am trying to run my electric guitar in garageband 11 but there is no options to modify the inputs/outputs to built

    There is no option to modify the sound input/output to built-in input or built-in output.  I'm guessing the electric guitar is not being registered.  I am using a 1/8" mono -1/4" mono cable to go directly from the output jack on my electric to the headphone jack on a macbook pro.  How can I get this to work?

    When you use an external device for input, GB often automatically selects that same device for output. It's an ease-of-use feature for most external devices. If your device doesn't give you the option to output to speakers/headphones, you don't want GB to do that.
    Within GB, go to GB>Preferences, Select the Audio/Midi tab. In the Drop-down under output, choose "Built-in Output" and connect your external speakers/headphones to the Mac's headphone port (Alternately, you could use system preferences to direct your Mac's audio-output to your speakers and select "System Setting" in GB Prefs. The Mac's own speakers aren't going to be nearly as much fun as running it to your big speakers/headphones).
    Hope that makes sense...

  • How to get center alignment of Input/Output field in Module Pool

    Hi Friends,
    I am using Input/Output field in my Module pool program. Dynamically i am submitting the text to Input/Output field. What i want is i want to display the submitted text as center. By default It is displaying left aligned.
    Thank U in advance.
    Mahender.

    Hi,
    Use syntax "Centered".
    take one variable push into the field
    write w_variable1 to w_variable2 centered.
    next push the varaible to Destination screen input/output Field .
    Make sure the Field the Character Type.
    Prabhud@s

  • How to check current input/output rate on router subintenterface via SNMP?

    How to check current input/output rate on router (2821, etc..) subintenterface via SNMP, like cacti monitoring system.
    I cant find OID to make this with snmpwalk.
    Or there is no way to check current load by this way? Only polling?
    P.S. Ethernet subinterface, of course.
    With great respect, S.A.

    Hi,
    Try to use:
    1.3.6.1.4.1.9.2.2.1.1.6 - InBitRate
    1.3.6.1.4.1.9.2.2.1.1.8 - OutBitRate
    1.3.6.1.4.1.9.2.2.1.1.28 - ifDescription

  • Disc image input/output error

    When burning a disc image using disc utility, I get the ever so popular input/output error message. I cannot find anywhere on these posts a solution to this problem. It is not dirty discs, etc. It happens when I try to copy dvd's... which are not licensed, etc.

    Could be so many things, Input/Output errors are generally loosing contact with a device for a variety of reasons, do you get any error # with that?
    Open Console in Utilities & watch for more info whn you try to burn, or open the Disk Utility Log if there.

  • "input/output error' when making disc image from DVD

    I've had problems installing Logic, and a Pro Apps Genius at Applecare suggested I try making an image of the problematic DVD (Audio Content 1) and then trying an install that way.
    While I can make an image of the Install disc to my desktop fine, the Audio Content 1 disc reports an "input/output error".
    This means I'm unable to copy the disc and then successfully install my Logic Studio.
    Any ideas?

    Thanks for your answer.
    Yes, I thought that might be the case - but I'd taken my Mac and Logic disks to a Genius bar, and the 'Genius' had said he'd fixed the issue. I just wish he'd explained what he did and why he didn't replace the faulty disk(s)!
    But is there any way around having the claim a disk, now I'm living abroad and my 'warrantee' has run out? It's going to be a pain in the fundament trying to claim a replacement set.

  • How to set input/output "use" attribute in the WSDL file of BPEL process?

    Hello,
    I have a BPEL process that I want to deploy it as an RPC web service. I want to access it from a Java module (via an automatic generated Java stub from the WSDL file exposed by the BPEL process).
    I wrote manually the corresponding WSDL file for my BPEL process, where I stipulated for the operations exposed by my process ( in <soap:binding> tag) the value of the attribute "style" to "rpc". Also, for each <input> and <output> of the operations (inside the <operation> tag), I set manually the attributes "use" to the values "encoded". Something like this:
    <operation name="getCustomers">
    <soap:operation style="rpc" soapAction="getCustomers"/>
    <input>
    <soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="Trial"/>
    </input>
    <output>
    <soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="Trial"/>
    </output>
    </operation>
    The issue is that, when the BPEL process is built and deployed, the WSDL file generated automatically by BPEL (based on the one manually writen) set the values of the "use" attributes to "literal". This is what is generated:
    <operation name="getCustomers">
    <soap:operation style="rpc" soapAction="getCustomers" />
    <input>
    <soap:body use="literal" namespace="http://acm.org/samples" />
    </input>
    <output>
    <soap:body use="literal" namespace="http://acm.org/samples" />
    </output>
    </operation>
    Is there any chance to keep the original values (written by hand) for the "use attributes?
    Many thanks in advance!
    Regards,
    Marinel

    I am not sure I understand your question. If you want all your BPEL service to be rpc still by default, you can change the templates: C:\eclipse\plugins\bpelz_0.9.XXX\templates.
    The BPEL PM engine support both style of invocation.
    I hope this helps. -Edwin

Maybe you are looking for