Basic Order View - Plant Maintenance

Looking for any advice, tips, tricks, things to look out for in using screen blocks, to structure the tabs on work order configuration, similar to notification configuration. I believe that this functionality came in with enhancement pack 3 in ECC6.0.

Dear,
For creting a Order view as per ur requierment, first u need to create a view profile in the customozing
When defining the tab pages, you must note the following:
The key of the tab page serves as the sort key for the sequence in which the tab pages are displayed.
You can assign a maximum of eight screen areas to a tab page. The sequence in which the screen areas are assigned also determines the sequence in which they are displayed on the tab page.
There are screen areas that take up a whole tag page (fullscreen). You must always enter these screen areas in the field for the screen area 1.
For all the pushbuttons for the navigation, that are offered on the initial screen of the order, you must define which tab page is displayed when you select the pushbutton.
If you do not define an active tab page for a pushbutton, the system uses the first tab page.
Now assign the created profile to the order type, planning plant and the activity category.
If you leave the activity category empty, then the assigned view profile applies to all the activity categories.
If you also define an activity category (for example, add), then the assigned view profile only applies to this activity category.
regards
sunil

Similar Messages

Basic Order View - Define View Profiles

In ECC 6.0, we have an option to customize the work order screen as per the busiess needs in the configuration path:
Plant Maintenance and CS -> Maintenance and Service Processing -> Functions and Settings for Order Types -> Basic Order View -> Define View Profiles
Question -> Is there a view profile defined by SAP for standard SAP work order screen?
We have a requirement to modify the standard SAP work order screen where we have to add additional tabs. Since there is no profile defined for standard SAP work order screen, we have to build from the scratch which takes a lot of time.
Any suggestions?
Thanks

Thanks SN. Yes, I am aware of the user exit and also that we can configure the screens of work order in ECC 6.0 using SPRO but the only problem is that we have to build it from scratch. My question was to know if SAP had standard screen templates or profiles like they have for Notiification. Anyways thanks for your response, I got the below response from SAP for my question.
I've checked if its possible to customize the screen selections
like it can be done for notifications and unfortunately it isnt
possible in the standard system
The only customizing that can be done for order can be found using the
following path:
SPRO>>>IMG>>>PLANT MAINTENANCE & CUSTOMER SERVICE>>>MAINTENANCE &
SERVICE PROCESSING>>>MAINTENANCE & SERVICE ORDERS
You will find the following options:
DEFINE FIELD SELECTION FOR ORDER HEADER(PM)
DEFINE FIELD SELECTION FOR ORDER HEADER(CS)
DEFINE FIELD SELECTION FOR ORDER OPERATION(PM & CS)
DEFINE FIELD SELECTION FOR ORDER COMPONENT(PM & CS)

Basic order view IMG activities in ECC6.0

Hi guys,
In our ECC6.0 system the IMG activities for customizing the tab pages in the PM order are missing. In the releasenote for ECC 6.0 it says I should expect it under Maintenance and Service Orders -> Functions and Settings for Order Types -> Basic Order View.
Any of you have the same problem? How did you get to the IMG activities?
Thanks in advance!

Hi Harvey,
To enable the PM order screen layout in IMG, the extension set EA-SCM-IMG (Enterprise SCM switch for IMG) activation is enough or any other components are needs to be configured. (Component EA-APPL is already installed).
Is there any implications by activating this extension set? where should i get the documentation to know the affects by activating any extension set.

PM Basic Order View

Attempting to configure a basic order view for order type F1
I have configured the basic view profile with the following to see if it will work:
View profile: Fleet
Tabs
Tab Page 10
Tab Active "checked"
TabPageTitle Fleet Order
TabPageSymbol Blank
S 1 005
S 2 001
S 3 002
Navigation
Pushbutton Header Data
Tab Page 10
I have also assigned this to the F1 order type for all activities.
When I go to create an F1 order my view does not change.
What could I be missing?

Hi,
You need to be really careful when you are turning on enhancement packs on SAP, once this functionality is working is not possible to return back. This application may have impacts in other areas
Please review the information below:
http://help.sap.com/erp2005_ehp_02/helpdata/EN/46/4AD530501C0DB6E10000000A1553F6/frameset.htm
Regards
Carlos Gonzalez

Basic Order View.

Hi,
I am configuring BASIC ORDER VIEW, I have two queries
1) Why am I not able to view this pushbutton any where on the initial screen?
2)I want to view the costs in this configured view without switching it to the old GUI.
Thanks in advance.

hi
can you clearly specify the requirement , i am not able to understand your query
regards
thyagarajan

Unable to create a order in plant maintenance

Hi,
I have deployed BUSINESSPACKAGEs of ERP5 for PLANT MAINTENANCE, after deploying i have assigned the roles and configured sso when i go to role maintenance execution and click on create order i can open the screen. but when click on notification and click on create order i could not able to create the order
The error throughing is iview "maintenance_order" not available.
Could you please tell for the above iview which BUSINESS PACKAGE is used.
Regards,
jagadish

You need to have Business Package for Common Parts to create manitanance orders, please check these links:
http://help.sap.com/saphelp_erp2005/helpdata/en/3e/5dd2416d9c1c7be10000000a1550b0/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/fe/5bd2416d9c1c7be10000000a1550b0/content.htm
Thank you,
Shyam

Creation of Sub Job Order/ Maintenance Order in Plant Maintenance Module

Dear SAP Expert and Gurus,
I am new in SAP Plant Maintenance Module, and right now having problem to create sub Job Order/ Sub Maintenance Order. Kindly provide the step on it.
Thank you
Regards
Leonard Tan

hi
check out this link
http://help.sap.com/saphelp_40b/helpdata/EN/5b/ae2e484b8611d182ba0000e829fbfe/content.htm

Billing of Service Order in Plant maintenance.

Hello
I am new to Plant Maintenance module. I am supposed to create the Service order and bill the cost to the customer.
Does anyone can give me the procedure for the same in detail?
Thanks...

From SAP Help.
The BOM structure is reflected in the different technical categories of BOM provided in the PM system:
Simple BOM
The first BOM that you create for a technical object or material has no defined technical category and a simple structure. It is described as a "simple BOM".
Variant BOM
Variant BOMs have a more complex structure. They are used to group together several BOMs to describe different objects that have a high proportion of identical parts.
Multiple BOM
Multiple BOMs have the most complex structure. They are used to group together several BOMs to describe one object, for which different combinations of materials are used for different production methods. Multiple BOMs are usually used in production planning and have little or no use for plant maintenance.
Note: There is no concept of Alternative BoM for PM.

BAPI for changing PRT link to operation in order in Plant maintenance...

Hello,
I am working on Plant maintenace module. I want to change the PRTs associated to an operation (VORNR) of an Order (AUFNR) programatically.
The PRT documents are created automatically in SAP with newer versions. Whenever a newer version is encountered, The PRT link with the Operation of an order should be changed programatically.
Is there any BAPI avaialable to do change PRT linkt o operation of order ?
Thanks
Regards,
Rajesh.

No such BAPI exists...

Internal Order Budgeting for HR and Plant maintenance

Dear All,
I am using internal order for budgeting control. I want to use internal order budgeting for Payroll also. How do i assign internal order for the same.
I want to check budget through internal order for plant maintenance order also. At the time of issue of material to PM order or at the time of settlement.
regards
ranga

Budget Profile:
IMG => Internal Orders => Budgeting and Availability Control => Maintain Budget Profile
Make sure activation type made to 1.
Availability control settings:
IMG => Internal Orders => Budgeting and Availability Control => Define Tolerance Limits for Availability Control
Regards,
Ravi

Plant Maintenance report

Hello Guru's
I am new to plant maintenace, I need to create reports for equipment log.
fields in the report are
Notification#, order#, Notification type, TechId#, functional location, event description, Equipment Number, Description,date due (basic finish), Completed by ( from conf#), Completion date(Actual finish), Reviewed by (from Action Log), Date closed.
Please suggest me what are the tables should I conider to create report for above data.
Thanks
with regards
Srikanth Pusina
Edited by: Srikanth Pusian on Jun 4, 2008 5:34 PM

I am not sure about action log.. but here are tables..
Table Name     Description
AFAB     Network - Relationships
AFFH     PRT assignment data for the work order
AFFL     Work order sequence
AFIH     Maintenance order header
AFKO     Order header data PP orders
AFPO     Order item
AFSPOPR     Split Operations in an Order Split
AFSPREL     Relation Between Orders in an Order Split
AFVC     Operation within an order
AFVU     DB structure of the user fields of the operation
AFVV     DB structure of the quantities/dates/values in the operation
AUFK     Order master data
AUFM     Goods movements for order
HIKO     Order master data history
HIMA     PM order history - materials
HIVG     PM order history - operations
PMCO     Cost structure of maintenance order
PMCO1     Cost profile: Value category proposal
PMCO3     Plan version: Estimated costs for maintenance orders
PMCOQT     Quantity structure for the maintenance order
PMFLAGS     Flags if certain conversions have been run
RESB     Material reservations
T003O     Order Types
T003P     Order Type Descriptions
T024I     Maintenance planner groups
T350     Maintenance Control Parameters: Client/Order Type
T350E     Access sequence addresses for address proposal purch. data
T350I     Combination of order type and PM activity type allowed
T350W     Maintenance control parameters: Order type plant
T352B     Technical report
T352R     Maintenance revisions
T353I     Maintenance activity types
T353I_T     Maintenance activity type description
T356     Priorities
T357M_T     Operating condition texts
T370N     Object link category
T370N_T     Language dependent texts for T370N
T399I     Planning plant parameters
T399J     Maintenance parameters (client)
T418V     Item category proposal for component assignment
TPAER_PM     Partner Functions in Partner Schema (PM) with Copy Flag
TPEXT     Profile for external procurement
TPEXT_T     Text tables for profiles (external procurement)
TPMIM     IM allocation key
TPMP     Maintenance profile
TPMPO     Maintenance order processing profile
TPMUC     Deactivate the Update Check CO_ZV_CONSISTENCY_CHECK
TPMUS     PM/SM - User default values
VIAUF_AFVC     PM order operations
VIAUFKS     Maintenance order (view)
VIAUFKST     Maintenance orders (view)

Permits issue in plant maintenance order

How to give the authorization <b>to two different persons</b> for <b>permits issue</b> in plant maintenance order?

If you see the purpose of permits it is very basic. If you need permission to do hot work you need permission from the fire department. There will be a designated person from the fire department to issue the permit. And that's it. No more advanced features.
If you want additional features I think your solution lies in WCM.
thanx
"Whoever reaches first wins"

Plant Maintenance Order Act Costs-0PM_OM_OPA_2 or 0CO_OM_OPA_6 datasources?

To get Actual/plan costs for the value categories in Plant Maintenance workorders, which DataSource would I use? The 0PM_OM_OPA_2 or 0CO_OM_OPA_6?
What is the difference? The 0CO_OM_OPA_6 is already pulling data for Internal orders in our system.
How can I check to see if this is also pulling in Maintenance Order data?
Since 0CO_OM_OPA_6 is already pulling in data, does it make sense to use this DataSource instead of activating the 0PM_OM_OPA_2 data source?
Please advise.
Thanks.

Sorry, I should explain my requirement in detail.
I should not use the LO Cockpit 2LIS_17_13HDR or 2LIS_17_13OPER datasources. But I need to get the WorkOrder Header and Detail data (operation lines with confirmations, AFVC and AFRU tables) along with the actual costs to create a custom BEx query for the work order header/detail and actual costs.
My initial thought was to enhance 0COORDER_ATTR and get the WorkOrder header data. 0COORDER does not have the Equipment or Functional Location. 0COORDER_ATTR would need to be enhanced to add these.
For Operation line and confirmations data, write a Generic data source to populate a DSO. Then use the actual costs data coming from the 0CO_OM_OPA_6 datasource.
After further thought, I am wondering if I can use 0PM_ORDER as is without enhancements and use the 0PM_OM_OPA_2 to get the actual line data. Also, here I have a question. 0PM_OM_OPA_2 is used to populate 0PM_DSO4 DSO along with 3 other datasources, the 2LIS_17_13HDR , 13OPER and 1 datasources. Since I cannot use the LO datasources, can I poulate the DSO with just this one datasource(0PMOM_OPA_2)?
For operational lines I would still write the generic data source (a view might suffice).
Experts out there, please let me know if I really off here, with the design.
Really appreciate any thoughts.
Thanks.

Plant Maintenance Orders

Dear All
Is there any report to view the Unsettled Plant Maintenance Orders? How to identify the if any order is settled or not?
Pls Guide
Thanks & Regards
Veena

Hi,
You can check KOC4, in this select order types and enter date and execute, later on select debit amount and credit amount in screen layout, if both are equal it is settled, otherwise you have to settle the orders.
if it is helpful to you, assign points,
regards,
Gopi.

Goods issue for plant maintenance order

Goods issue with ref to plant maintenance order( Componenets of the order) is not possible in transaction code MIGO. Error message " MIGO is not possible for the refurbishment order".
Goods issue for the same order can be posted with transaction MB!A.

hi santhosh
kindly check the order type .i think you are using MB1A for refurbishment process.but it is not possible.only maintenance order can be posted via MB1A
follow the procedure for goods issue in refurbishment order.
Choose Logistics ® Plant maintenance ® Maintenance processing ® Completion confirmation ® Goods movement ® Goods movement.
The entry screen for a goods issue appears.
Choose the pushbutton For order.
Enter the relevant order number in the dialog box and choose Continue.
An entry screen appears.
Choose Copy.
The Maintain Serial Numbers dialog box appears.
Choose Reference document.
Enter the order number in the Refurbishment order group box and choose Execute.
A list appears with the planned serial numbers for the refurbishment order.
Check the selections of serial numbers, for whose material you want to post a goods issue, and choose Copy.
The serial numbers are copied into the Maintain Serial Numbers dialog box.
Choose Exit window.
The goods issue is posted.
regards
thyagarajan

Basic Order View - Plant Maintenance

Similar Messages

Maybe you are looking for