Bath Input for VBO2 transaction

Hello everyone,
I'm programming a BI for transaction VBO2, changing rebate agreements from conditions in a file.
It's working right.
My problem is that when the rebate agreement is more than 1000 conditions and I
introduce material settlement, the BI does not placed correctly in the first box empty. It works OK for less than 1000
records, using the command P++, going to the bottom of page and charge the
materials back, but for more than 1000 conditions, SAP doesn't recognize the P+ or the
P++ to scroll and stays in first position.
Does anyone have any idea?
Thank you very much!

Hi Javier,
No doubt that we clearly understand what you say. As I said, my test shows that batch input supports 1000+ lines without problem. So, for me, the issue is clearly with VBO2 + BI.
Unfortunately, I can't test on my system as we don't use VBO2.
Could you tell me what dynpro (please indicate the subscreen if any, not the main dynpro) contains the concerned table control so that I have a look at its scrolling logic?
Did you try to record and run the batch input with the screen "default size"? (though I don't see why it would better work; for more information, see Note 11788 - Batch input, variable step loop or table control)
Finally, if you don't get any other solution, I recommend you to contact SAP support to report the "VBO2 + BI scrolling bug".
sandra

Similar Messages

Massive data input for employees Transaction

Hi experts!
I need to perform a massive data input for employees. Iu2018ve tried with de Tx PA71 u2013 Fast entry of Time Data - but It needs a document or a manual preselecting.
Its necessary selecting ranges of personnel number in order to perform a massive data input for employees as a salary benefit or bonus for a group of employees.
Do you know that kind of transaction?
Thanks in advanced!

Hi ,
You could also use T Code : SCAT/SCEM for mass upload or deload.
You may use below method to create SCAT in ECC (This is not a Direct method)
1) Run transaction SCEM
2) Enter a CATT name
3) Click on change, prompt appears saying it doesn't exist, do you want to
create. Click yes.
4) Enter the TCODE to record.
5) Execute the TCODE and save data.
6) Back out. Click End and copy button.
7) Double-click the TCD on the left side of screen
8) Click F5 or Field Inputs Variants
9) Use black down-arrow to step through screens.
10) Double click on fields to set variables. (SAP adds leading & to each
variable name).
11) Save and back out.
12) Go to menu path Environment --> Extended CATT.
13) Click change and change type from (M) Manual Test Case to (C) CATT.
14) Assign component.
15) Click save. Back out.
16) Execute SCAT and Go to --> Variants --> Export Default and save as text
file.
17) Edit file with new test data.
18) Execute CATT.
After step 6 you can also leave SCEM and run SCAT and perform the
parameterization there as usual.
Hope this helps.
Inputs for Neeraj.

LSMW - Direct Input for XD01 transaction

Hi Experts,
I am facing an error while doing the LSMW - using batch Input session. In the last step of LSMW.. while running batch input session, i faced an error "Function code cannot be selected" this error is coming because the Function code(OK Code) of that screen is "KNZA".
the problem is that how can i change the OK code (function code) in the standard program. or is there any other way for solving this problem...
please help me out....

Hi
I feel the problem is with the Sturcture relations step. Are you mapping the below structure?
BKNZA Customer Master Record Altern.Payer (Batch Input Structure) -
Ensure that for all the structures you are mapping here.. you need to provide elements in field mappings. Otherwise it may lead to such errors.
Try to check all the steps once again and then generate the program again and check.

Batch input for IQ02 not accepting "yes" for 'POPUP_TO_CONFIRM'

Hello,
I wrote a batch input for a transaction (IQ02) and all works fine except one thing:
-when all data is entered and SAVE button is pressed, there is an additional pop-up, from an user exit which needs an YES/NO answer.
The function module used to display the popup is: 'POPUP_TO_CONFIRM'
I do not manage to press the YES button. This is the data I receive when pressing F1 on YES button:
Program SAPLSPO1
Function OPT1
Normally, in batch input, this is the way I pass user-commands:
PERFORM bdc_dynpro USING 'SAPMIEQ0' '0101'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
But it's not working for this particular situation.
Any ideas?
Thank you.
Edited by: Julius Bussche on Jan 5, 2009 2:07 PM
Quality of subject title improved.

Hi
Find out under which condition popups appears.
for that condition you have to put the following code
PERFORM bdc_dynpro USING 'SAPLSPO1' ''<SCREEN_NUMBER>'.
PERFORM bdc_field USING 'BDC_OKCODE' '=OPT1' .
Hope this helps,
Rajat

Batch Input / Recording for EnjoySAP transaction

Hi Experts,
May I know any possibility for us to do recording/batch input processing for EnjoySAP transaction ??
Nowadays I need to do Recording for ME29N, as ME28 have some problem on release some of the PO document, so may I know any tool that I might can use?
Thanks
Cheers,
Isaac.

Hi Issac,
Suggest you to Search in SDN with key - eCATT
Will get few more useful related Posts.
Check
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Part I - eCATT An Introduction
/people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
Part II - eCATT Scripts Creation - TCD Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
Part III - eCATT Scripts Creation - SAPGUI Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
Part IV - eCATT Chaining, Parameterization, Creation Of Test Data,Test Configuration, System Data /people/sapna.modi/blog/2006/04/18/ecatt-chaining-parameterization-creation-of-test-datatest-configuration-system-data-part-iv
Part V - eCATT Scripts Management Via Test Workbench
/people/sapna.modi/blog/2006/04/13/ecatt-scripts-management-via-test-workbench-part-v
Part VI - eCATT Logs
/people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
Reward points if this Helps.
Manish
Message was edited by:
Manish Kumar

Writing a Batch Input or Call Transaction program for transaction code MMAM

Hi All,
I'm writing a Batch Input or Call Transaction program for transaction code MMAM (Changing Material Type). The program was able to run but somehow I was not able to capture the log of the output after running MMAM. The log was not part of the SY-MESSAGE so adding in MESSTAB into call transaction doesn't help while BDC session logs shows only the transaction was processed.
Anyone has encounter such problems before?
Regards,
Ramu.

Hi
Overview of Batch Input Session
The first batch input method is to create a batch input session. It is the processing of this batch input session that updates the database, not the execution of the batch input program. i am giving you example for Change Vendor you practice for ur tcode
For our example, we will use the Change Vendor transaction (FK02) to add a street address to an already existing vendor.
Step #1
Use SystemStatus menu path to determine online program name (SAPMF02K), screen number (0110)
Step #2
Use F1 key and Technical Info pushbutton in each screen field to be filled to determine the field name.
Step #3
Determine how to proceed in the transaction
(save the record by clicking on the Save pushbutton or pressing the F11 key).
The process flow of CALL TRANSACTION
A program that uses CALL TRANSACTION USING to process legacy data should execute thefollowing steps:
Prepare a BDCDATA structure for the transaction that you wish to run.
Prepare a internal table to store error messages Tab_Mess like structure of BDCMSGCOLL.
With a CALL TRANSACTION USING statement, call the transaction and prepare the BDCDATA structure. For example:
CALL TRANSACTION MM01' USING BDCDATA MODE 'A' UPDATE 'S'. MESSAGES INTO TAB_MESS.
IF SY-SUBRC <> 0.
<Error_handling>.
ENDIF.
Overview of Batch Input Session
The first batch input method is to create a batch input session. It is the processing of this batch input session that updates the database, not the execution of the batch input program

Error while running a BDC for the Transaction F-02

Hi,
 I'm getting an error "Parking not possible during Batch Input" while running a BDC for the transaction F-02.
 When i click on the error message it displays the message [b]"In Customizing, you can control whether an error message is issued."
 How to solve this issue?.
 Waiting for ur replies.........
Regards
N.Senthil

Hi,
When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
 Refer below theard for sample bdc code for f-02.
https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
Regards

Error exec. Background Mode a Batch-Input using KP26 Transaction Code

I have a program that build a Batch-Input based on transaction code KP26.
I encounter the following error :
Field Z-BDC02(1) is not an input field (Program : SAPLKPP2 Screen : 0112)
When executing in background I got the error and when executing in Foreground, it is OK.
I use SHDB to look at the field needed and it gave me the same field to use.
Here is an extract of my program for the field I have the issue on :
    PERFORM F100_BDC_FIELD USING 'Z-BDC02(01)' I_T01-LST.
    PERFORM F100_BDC_FIELD USING 'Z-BDC05(01)' I_T01-SPRED.
    PERFORM F100_BDC_FIELD USING 'Z-BDC07(01)' I_T01-TOV.
    PERFORM F100_BDC_FIELD USING 'Z-BDC08(01)' I_T01-TOF.
Any one have an hint to solve this ?

Hi,
Just one remark: batch input is always executed in synchronous mode (hopefully, otherwise we would get many lock issues during mass updates!) Or is there something I missed?
Same thing when you use BDC_INSERT, CTU_PARAMS is ignored ([SAP note 1437811 (Batch input: BDC_INSERT parameter CTUPARAMS)|https://service.sap.com/sap/support/notes/1437811 ])
About the issue, I don't know, so maybe explain more about the context: for instance, do you run the session under a different user? (for instance, the user could be assigned a transaction/screen variant with table control variant, that protects some fields) Do you have one transaction in the batch input session or are there several ones. Try with one only to see if it works. If yes, then maybe it's something in memory that changes the "input-capability" of the field after the first transaction.
Sandra

Batch Input for VA31 and adding new partner

Dear All,
I have a already well running program, which is creating new scheduling agreement via transaction VA31 in batch input mode.
Now, there is a new requirement to add one partner in the header. I made a recording and saw that there is a subcreen SAPLV09C. I extended the program, but doesn't matter I'm doing I always get the message:
No batch input data for screen SAPMV45A 4002
Does anyone has experience with adding new partners in the header and can explain me how to make the right development.
Thanks in advance.
Klaus

Hi Klaus,
If you get the error No Batch input data for screen proceed as follows:
1. In the Installation Assistant mark the foreground checkbox (in the column FG of the Installation Assistant project view) of this specific eCATT.
2. Activate the project again.
3. Run the eCATT in foreground
seee this links
ftp://ftp.software.ibm.com/software/websphere/integration/wbiadapters/library/doc/pdf/mysap4/mysap4_60.pdf
www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm - 9k -
thanks
karthik
reward me if usefull

BDC for VBO2 does not update material in rebate document

Hi All
I am trying to close rebate agreement using VBO2 transaction.
The steps that I am following are as follows
1. Put rebate agreement number
2. Rebate Payments --> Final Settlement --> Using payment screen
I am making all the amounts 0.
Then Saving it.
Now this all process is done using a BDC session(Processed using SM35)
When this session is processed, a document of type B1 is created. But sometimes it does not have any material (line item).
What can be the reason?
Also I would like to know, which transaction is used for creation of this B1 document.

Can i Have the BDC code.
regards
Amit

When we have to go for session method, when we have to go for call transact

when we have to go for session method, when we have to go for call transaction method if i have a 3000 records in flat file. which is better? why

Data Transfer
During the process of data transfer, data is transferred into the SAP R/3 System. This transfer is from an external system to SAP R/3 system. Whenever you transfer data from an external system into an R/3 System, you can use data transfer because it is installed and regularly transfers data from an external system into an R/3 System.
As discussed, with the help of BDC, you can transfer the required data from a non-SAP system to an SAP system. For this kind of data transfer you are required to write an ABAP program. This ABAP program would help to export the concerned data to a sequential dataset file. The data in this file has to be stored. This should be stored in a format, which is acceptable to SAP batch input program. But, to transfer data from a SAP system to another SAP system, you can take the aid of RFC or CPI-C.
SAP application supports the data transfer of numerous SAP business objects. The said data transfer program specifies the data format definition, which is necessary to import the data into the R/3 System. There are three methods available for transferring data:
Direct Input:
In this method the SAP function modules execute the consistency checks. However, there are other means of checking with the help of screens. The Direct Input Method has considerable performance advantages.
Call Transaction:
In this method you can check the data consistency with the help of screen logic.
Batch Input Session:
In this method data consistency is checked with the help of screen logic.
Direct Input Method
Among the methods of data transfer through BDC, direct input method is the one that is used, especially in case of transferring large amount of data. In order to enhance the batch input procedure, the system offers you with the direct input technique.
There is a distinction between the batch input technique and this technique. Unlike batch input technique, this technique does not create sessions. Instead, it stores the data directly. Moreover, it does not process screens. The data has to be entered directly into the corresponding database tables. The system calls a number of function modules which execute necessary checks, if any required. In the case of errors, the direct input technique has a facility to restart the entire mechanism. However, if you want to restart the entire mechanism in case you faced an error, then direct input programs must be executed in the background only. One has to use program RBMVSHOW or Transaction BMV0 to maintain and start these programs.
Call Transaction Method
Call Transaction method is another method used for Data Transfer. In this type of method your program will use the ABAP statement CALL TRANSACTION USING in order to run a SAP transaction. In this type external data need not be deposited in a session for being processed later on. Instead, the entire batch input process takes place inline in your program.
Here, the data transfer program must convert the data that has to be transferred into the SAP system. This is as per requirement by the SAP data structure or the transaction which is using it. It is to be remembered that a conversion of the data types may be necessary at different times during the process.
Suppose there is a data type mismatch then you have to convert the data types to type C. In this regard the data transfer program should be capable of exporting the data in SAP format to the sequential file. At the time of uploading the data into the SAP system, the BDC program reads the data from the abovementioned sequential file.
Batch Input Session Method
This is the third method for data transfer. If you use the batch input method to transfer data, then you should remember that an ABAP program has to read the external data which is to be entered in the R/3 System. Subsequently, it stores the concerned data a "batch input session." The batch Input session records the actions which are required in the process of transferring data into the system. This can be done by using normal SAP transactions.
As soon as the program generates the said session, you will be able to run the session in order to execute the SAP transactions in it. Moreover, you can start the session, and at the same time, can monitor a session with the help of batch input management function. For this you have to choose:
System à Services à Batch input. Moreover, you can have the session run in the background processing.
Writing a Data Transfer Program
If you want to write a data transfer program, you have to follow the steps mentioned below.
Firstly, you will analyze the structure of the existing data. Subsequently, your job is to specify the conversions, which are essential to fill the SAP data structures.
Secondly, you have to generate the SAP data structure. In case the program is written in ABAP, you will require only the required tables in the concerned program with the help of TABLES statement.
Thirdly, you will have to initialize the SAP data structure.
Fourthly, fill the structure with data, performing any conversions and error checking that are required.
Finally, you will write the sequential file. In the SAP system this sequential file is typically required for making the data available to the batch input program.
Batch Input Method
Batch input method is a type of data transfer method. It is used for bulk data transfer; it is one of the primary ways by which data can transferred into the R/3 System. This method is not for near real-time data transfers.
There are various typical uses of batch input. One of the ways includes the one-time import of data. This import of data is from a legacy system into a newly installed R/3 System. In addition to it, another typical use is for periodic (i.e. hourly, daily..., and so on) transfers of data. These transfers are from external systems or legacy systems which are still in use into R/3 system where all enterprise data is consolidated.
The R/3 applications deliver different programs for batch input, which are ready to be used. However, in some cases a customer has to write his or her own batch input program. This is required in order to convert the concerned data from a legacy System or from a proprietary format into an R/3 data format.
The process flows for a batch input are discussed below.
Data Transfer Decision-Making: It is with a decision to transfer data from an external source into R/3 that the process of batch input begins. It is probable that the external source may be a legacy system that is being replaced. A one-time bulk data transfer is foreseen in this regard. Alternatively, the external source may be an external system that is to remain in use. In this case, a regularly recurring bulk data transfer is foreseen.
Setting up Batch-Input for Data Transfers: If R/3 standard one-time or regular data transfers are required, then by means of customizing settings in the R/3 Customizing System in SAP ASAP set up will occur. You must set up custom batch input procedures by hand, which means the system administrator must schedule the data conversion program that creates the batch input session. The system administrator and the batch input programmer must determine the following: how frequently data is made available from the external system, how frequently the conversion program should run, and whether the conversion program runs in R/3 (ABAP program) or in a host system (external program).
Processing Batch Input Sessions: When a batch input session is processed, then the actual transfer of data into R/3 takes place. Little attention is required in processing of batch input sessions by the system administrator. Usually, the starting of batch input sessions is automated by the system administrator. If necessary, the administrators can also start batch input session explicitly from transaction SM35.
Checking Batch Input Sessions: For a system administrator the routine activity is to check daily or more frequently in transaction SM35 whether all batch input sessions have been completed successfully. It is the schedule for running batch input sessions on which the schedule for checking sessions depends upon. For doing this check the R/3 System provides easy-to-use batch input management tools.
Analyzing Errors: It is the duty of the system administrator to analyze the problem if one or more transactions in a session end in errors. Usually, the assistance of the affected data entry specialist or department for this analysis will be needed by the system administrator. In the situation where the problem was caused by incorrect data conversion or incorrect generation of the batch input session then the programmer who wrote the data conversion program may also need to be involved.
Error Handling in Batch Input Method
It is found that most problems usually fall into one of the following two categories discussed below.
In this case either required data is missing from the batch-input session or invalid data has been included in the session. Errors in the data conversion program or the presence of unexpected types of data or incorrect data in the legacy database are the possible external causes of this type of problem. Within R/3, the causes for this type of problem include incorrect or incomplete customizing in an application. For example, a legacy data type may not have been foreseen in the check table entries made in application customizing.
This case mainly includes technical/programming problems. The data is entered by a batch input session by running R/3 transactions non-interactively. Therefore, a typical technical or programming problem is the incorrect identification of one of the data fields in a transaction. Thus, the conversion program may not fill a required data field or may have provided invalid values.
Conclusion
I have gone through the details of batch data communication and various methods used to transfer data. One can make use of BDC to transfer data from a SAP to SAP system. In addition, it can transfer data from a non SAP system to SAP system too. I have discussed the various methods of BDC and the error handling in the respective methods.
Thanks,
Shankar

How i can give date in each input for applying the exchange rate in Query.

Hi Gurus,
We have a requirement to create some currency conversion queries. In the selection screen user should be able to give four inputs. Like given below
Input 1.          a) key figures
                        b) Fiscal Year
                        c) Fiscal Period
                        d) Exchange Rate Type
                        e) Date (Exchange rate will be applied which is applicable on the given date)
Input 2.         a) key figures
                        b) Fiscal Year
                        c) Fiscal Period
                        d) Exchange Rate Type
                        e) Date (Exchange rate will be applied which is applicable on the given date)
Input 3.          a) key figures
                        b) Fiscal Year
                        c) Fiscal Period
                        d) Exchange Rate Type
                        e) Date (Exchange rate will be applied which is applicable on the given date)
Input 4.          a) key figures
                        b) Fiscal Year
                        c) Fiscal Period
                        d) Exchange Rate Type
                        e) Date (Exchange rate will be applied which is applicable on the given date)
So we will have 4 key figures in the query results with the exchange rate applied on the given date.
I will make four restricted key figures and make the query. I do not know how i can give date in each input for applying the exchange rate.
Please give your suggestions to resolve my problem.
Many thaks in advance.

You can not bring the key figures in the selection screen for the currency translation. Instead you can apply a currency translation type to respective key figures in the query definition.
The currency translation type can be defined in RSCUR transaction, where you can maintain the parameters like Exchange Rate Type, Exchange Rate Date etc.
You can refer one of my article on this at
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/600157ec-44e5-2b10-abb0-dc9d06ba6c2f
Hope this helps.
Regards,
Yogesh

Enhancement for BGM1 Transaction

Hi Friends,
I have a reqirement to add a new column in the BGM1 transaction -> Item Screen -> Services Tab , in-between SORTID and INCL/EXCL. I have checked all the User-exits, Customer exits and BADI's available for the transaction but could not find a suitable enhancement for this.
I have given the basic frame work of the sequence in which the column should be inserted below.
Item Service Text LongText Sortid New field to be inserted INCL/EXCL
Is there any way to modify the screen by inserting this column. Please guide me.
Thanks & Regards,
R.Indirajit.

Hi
I do not think so, there is any user exit/BADI related to "Baseline date" change.
Instead, if you are using ECC6.0 you can go with " Enhancement Spots ".
Program:
Include: LFDCBFM0
Search for " Implicit Enhancement " in the above program.....
At the end of the Subroutine " Modify_Screen_Header_Fields ", place your logic:
Logic:
 Loop at screen.
 Case Screen-Name.
 When 'INVFO-ZFBDT'.
 If <company code> is YES.
 screen-input = 0.
 modify screen.
 endif.
 endcase.
 end loop.
Hope this helps.............

BDC Recording for cm07 Transaction

Hi Everyone,
I'm doing BDC recording for CM07 transaction. In Recording, i need to give a print command by specifying the spool title.
For this, after opening the print window, i need to click the 'properties' button, and then select the spool title and input the value.
But I'm unable to do the recording of this print dialog box. The recording ends as soon as I give the print command.
Can anyone please tell me the solution to it.
Thanks and Regards
Rishika bawa

Hi,
See via transaction SHDB:
SAPLCORU_S     0100     X
BDC_OKCODE     BU
                                                       AFRUD-RUECK     0000000000
                                                       AFRUD-AUFNR     100051152
                                                       AFRUD-VORNR     0010
                                                       AFRUD-LMNGA     100,000
                                                       AFRUD-MEINH     PC
                                                       AFRUD-XMNGA     2,000
                                                       AFRUD-ISM01     200
                                                       AFRUD-ILE01     PC
The table for confirmations is AFRU.
Best regards,
Leandro Mengue

Nedd Bapi or FM for LT0G transaction

Hi all.
Could you pls let me know the BAPI or FM for LT0G transaction.
If any one has done BDC for the same pls suggest with ur inputs. I want to choose items & press the return to stock button.
Thanks in Advance.

Please check the below function modules
OIO_RT_DELIVERY_CHECK
OIO_RT_DELIVERY_POST
LE_DSP_CHANGE_RETURNS_DELIVERY

Bath Input for VBO2 transaction

Similar Messages

Maybe you are looking for