Battery / Hard Drive Cover Loose ? Shifting Back and forth ?

Hey Everyone...
Just wondering if I am the only one experiencing this...
the casing that covers the battery and hard drive is loose and shifting all over the place. I can hold a finger down on it and push around in a circle formation and the cover will move with it. The latch is closed and it supposedly secured shut.. but there is an obvious gap now when pushed in any one direction...
Any one else experiencing this ?

I have heard of a couple of cases. Take it in or call Apple and they will fix it.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Similar Messages

Image shifting back and forth

Is anyone experiencing strange shifts back and forth of images while they are working with them?
The image moves about 1mm diagonally, sometimes a couple of times.
Also scrolling of galleries seems to be much less smooth than before, sometimes locking up for many seconds, or the screen going completely white and then coming back.
Everything seems to have started happening after upgrading to LR1.3 (I am on 1.3.1)
I am also experiencing strange flickers on my screen even when using other programs as long as LR is loaded.
Windows XP 4GB / ATI Radeon 256MB
(So it is not an Nvidia issue)
I'm starting to think that a downgrade to LR1.2 may be a good thing.

Don,
The image is supposed to dance around on it own?
I took a closer look, and I think that I know what's causing it. It needs to be fixed, because it is reaaaaaly annoying.
If you are in any mode, and the image is enlarged (not grid), you will notice a small drop shadow going down to the right. Well, what is happening is that the drop shadow is changing to visible / not visible, and when the drop shadow is not there, the image moves down and to the right to the spot where the drop shadow was, and when the shadow reappears the image moves back up to make room for the drop shadow. So the image just dances diagonally a few times for no apparent reason. But the reason is a drop shadow YES/NO fast toggle.

My 27" iMAC is less than 3 month old. Many times regardless of what application I am in the screen will start shifting back and forth left to right. Then I can't do anything until the screen stabilizes. This takes anywhere from 5 to 25 secs. Any ideas?

My 27" iMAC is less than 3 month old. Many times regardless of what application I am in the screen will start shifting back and forth left to right. Then I can't do anything until the screen stabilizes. This takes anywhere from 5 to 25 secs. Any ideas?

why don't you take advantage of the free 90 days of AppleCare and utilize the free, professional telephone support from Apple instead of asking in the forums?

Question on how to use a variable in report object's horizontal formula to shift back and forth at refresh interval.

Hello All;
I have an SSRS Report that displays some slider objects. The report auto-refreshes every 5 minutes.
This report is displayed on a big screen TV and I want to shift the images back and forth every time it refreshes to prevent possible burn-in on the screen.
I see you can use a formula on the Horizontal position of objects, and I think a variable that gets added 10 and then subtracted by 10 every refresh could be used to display the objects in different positions each iteration, but I don't know how to do that
in SSRS. I have read up on variables, and I think I need a global variable, but not sure how to update it on each refresh iteration.
I read the links on using Silverlight to shift things, but that adds a whole other level of complexity.
I could even do something in the DB and then pull that into the formula field if needed.
Thanks in advance.
George Hicks

Hello All;
I have an SSRS Report that displays some slider objects. The report auto-refreshes every 5 minutes.
This report is displayed on a big screen TV and I want to shift the images back and forth every time it refreshes to prevent possible burn-in on the screen.
I see you can use a formula on the Horizontal position of objects, and I think a variable that gets added 10 and then subtracted by 10 every refresh could be used to display the objects in different positions each iteration, but I don't know how to do that
in SSRS. I have read up on variables, and I think I need a global variable, but not sure how to update it on each refresh iteration.
I read the links on using Silverlight to shift things, but that adds a whole other level of complexity.
I could even do something in the DB and then pull that into the formula field if needed.
Thanks in advance.
George Hicks

I have a sony HDR-SR5 camcorder and need to empty the iternal hard-drive. I have downloaded onto Picture Motion Browser and woud like to know if this will have stored all of the data on the hard-drive so can go back and edit later.

I have a Sony HDR-SR5 camcorder with a 40GB internal hard-drive. I need to clear the hard-drive as it's almost full. I have managed to download the footage onto Picture Motion Browser, but am wondering whether PMB will have stored all the info from the camcorder hard-drive so that I can edit later.
Also, I would like to back-up on another hard-drive, but when I have tried this I can't view the footage stored on the hard-drive so am not sure whether I have backed up sufficiently and in what format? If anyone can point me in the right direction, I'd be very grateful...

>I have managed to download the footage onto Picture Motion Browser
Isn't Picture Motion Browser available for Windows only? If so, why are you posting in an Final Cut Express forum? My apologies if I'm incorrect.
-DH

My hard drive is ready to die and i want to load my itunes to an external hard drive and then loan them back to my new computer. Will my ipod classic sync up to the new computer?

my hard drive is ready to die and want to move my itunes to an external hard then back to a new computer, will i have a problem syncing my ipod up to the new computer and in the process loosing all my music?

To be honest your post is rambling and difficult to read due to the lack of proper punctuation I only read it part way however...
The first thing to do is a proper backup. Your system has Time Machine built into it, here is the Time Machine Tutorial. Look that over, get yourself an external HD to use as a TM drive and backup properly! This will backup all of OS X however it will NOT backup MS Windows!
If you think your HD is failing then run Apple Hardware Test in Extended Mode and if it reports errors you can post them here.
Roger

I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it.

I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I desperate to get it back!
Any help will he appreciated!

disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?

Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

I am running my first backup on Time Machine using a Seagate external hard drive with a thunderbolt adapter and cable. I have a MacBook Pro 2011. It is backing up 11GB, and is telling me it will take approx two days. Is this normal?

Download the supplemental fix to 10.7.5
http://support.apple.com/kb/DL1599

I had to have the hard drive replaced on my computer and i lost all my iTunes data and I hadn't backed up my music. can I still transfer music from my iPod to a new iTunes?

I had to have the hard drive replaced on my computer and i lost all my iTunes data and I hadn't backed up my music. can I still transfer music from my iPod to a new iTunes?

Music Rescue also works as far as restoring your playlists etc. I've used it twice, you can use the Quick Recover mode, but have to click continue trial (something like that) allot, cp. to purchase option. Otherwise diesel is right as far as restoring via your purchase history.
Here is a review of Music Rescue.

I had a new hard drive fitted to my imac and restored it from my time machine back when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"

I had a new hard drive fitted to my imac and restored it from my time machine back up on an external hard drive when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"

To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file. Once the file was deleted I was able to open iTunes without difficulty. Note that I am running Windows 8. Hope this helps!

Can time capsule back up an external hard drive attached to my imac and the iMac internal Harddrive

Can time capsule back up an external hard drive attached to my imac and the iMac internal Harddrive

In addition to Kappy's comments, the external drive must be formatted in Mac OS Extended (Journaled) in order for Time Machine to be able to back it up.

HT201250 I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

ehphotograph wrote:
Can I restore docs from my hard drive if they were backed up using time machine?
Yes.
And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.
Also yes.
Directly-connected external drives (ie, USB, FireWire, Thunderbolt) are not backed-up by default. You must remove them from the exclusion list in Time Machine Preferences > Options to get them backed-up. (Network drives cannot be backed-up.)
And they must be formatted for a Mac -- any variation of Mac OS Extended.
If the drive is connected, you can browse or restore normally -- just go to the folder or document in question and Enter Time Machine.
If the drive is not connected, it's a bit different. See #E3 of Time Machine - Troubleshooting.
Message was edited by: Pondini

Can I make a second libary on a second hard drive and how do I switch back and forth

I woud like to creat a second libary for itunes on a second hard drive. I am using the latest itunes and lion on my imac and how do I switch back and forth.

Yes. You can.
Start iTunes with the Option depressed and that will allow you to select the library.
Allan

Battery / Hard Drive Cover Loose ? Shifting Back and forth ?

Similar Messages

Maybe you are looking for