BDC Recording..Points Guranteed

Hi,
I have done BDCs in past for vaious sap tranactions. But recently i am facing a trouble during the recording phase of t-code SO00 [ its S O and double zero..incase if you confuse between O and Zeros]....its not being recoded at all..I have to create a BDC for it.
Can you please tell me why the Recording is not possible for this T-code.
Points Guranteed to helpful answer.
Thanks,
Anid
Message was edited by: Anid

Hi
Are you using a release => 4.6A?
If it's so, this is an enjoy transaction, this kind of program use the control framework to display data and so it can't support the BDC.
You should use the FM to send message to SapOffice or e-mail: SO_DOCUMENT_SEND_API1 or SO_OBJECT_SEND.
Max

Similar Messages

Bdc recording for sm30

Hi,
I am asked to do bdc recording for the transaction sm30 through call transaction method. Can u please tell me how to do that...

Hi Buvana,
While recording just mentioned the tcode as SM30 and then it takes you automaticcaly to that transaction code then enter the table name and press maintain tab and then select new entreis. Enter the values then save it. Press back button. Now it will take return to recording section. now u can able to see the recoding section. Generate the program automaticcaly from the recording. Now take neccessary internal tables and complete the code. Reply for any queries and reward for useful points. Take care while recording. Don't mention any wrong values.
Regards,
Kumar.

BDC recording for AS01

hi all,
how to do bdc recording for AS01.please send me step step by approach.

Hi Satya,
Welcome to SDN.
Check this Sample program.
REPORT ZASSET .
INCLUDE ZASSET_INC .
PARAMETERS: P_PCFILE LIKE RLGRAP-FILENAME.
*PARAMETERS: P_FILE_S LIKE RLGRAP-FILENAME.
PARAMETER : H_CHK AS CHECKBOX.
"Proc Mode
Include the BDC *
**BDC DATA STUCTURE
*DATA: BEGIN OF BDCDATA OCCURS 0.
INCLUDE STRUCTURE BDCDATA.
*DATA: END OF BDCDATA.
messages of call transaction
*DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
TYPE-POOLS
TYPE-POOLS TRUXS.
DATA IT_DATA1 TYPE TRUXS_T_TEXT_DATA.
DATA : BEGIN OF IT_DATA OCCURS 0,
INVZU(015),
ANLKL(008),
BUKRS(004),
TXT50(100),
SERNR(018),
MENGE(018),
INKEN(001),
AKTIV(010),
KOSTL(010),
WERKS(004),
STORT(010),
ORD41(004),
ORD42(004),
EQANZ(001),
LIFNR(010),
AFASL(004),
NDJAR(003),
AFABG(010),
ANLGR(012),
ANLGR2(004),
ANBTR01_01(016),
ANBTR01_06(016),
ANBTR01_16(016),
TDATE(010),
TCODE(004),
TAMT(018),
PERNR(012),
KFZKF(015),
SAP_ASSET(12),
ERR_ASSET,
END OF IT_DATA.
DATA : BEGIN OF IT_DATA2 OCCURS 0,
INVZU(015),
TDATE(010),
TCODE(004),
TAMT(018),
END OF IT_DATA2.
DATA : BEGIN OF IT_DATA3 OCCURS 0,
ITEM(003),
INVZU(015),
ANLKL(010),
BUKRS(010),
TXT50(050),
SERNR(018),
MENGE(018),
INKEN(001),
AKTIV(010),
KOSTL(010),
WERKS(004),
STORT(010),
ORD41(004),
ORD42(004),
EQANZ(001),
LIFNR(010),
AFASL(004),
NDJAR(003),
AFABG(010),
ANLGR(012),
ANLGR2(004),
ANBTR01_01(016),
ANBTR01_06(016),
ANBTR01_16(016),
TDATE(010),
TCODE(004),
TAMT(018),
SAP_ASSET(12),
ERR_ASSET,
END OF IT_DATA3.
SUB ASSET MASTER TABLE
DATA : BEGIN OF IT_DATA_SUB OCCURS 0,
INVZU_M(015),
INVZU(015),
BUKRS(004),
TXT50(100),
ANLHTXT(050),
SERNR(018),
MENGE(018),
MEINS_007(003),
XHIST_008(001),
AKTIV(010),
GSBER_011(004),
KOSTL(010),
STORT(010),
ORD41(004),
ORD42(004),
EQANZ_016(001),
LIFNR(010),
LIEFE(030),
NDJAR(003),
NDPER(003),
ANBTR01_01(016),
ANBTR01_06(016),
ANBTR01_16(016),
BZDAT(010),
BWASL(003),
ANBTR01(016),
ANLN1(012),
ERR_SUB,
SUB_CODE(012),
ERR_SUB1,
END OF IT_DATA_SUB.
*& At selection-screen on value request for getting f4 help
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PCFILE.
PERFORM VALUE_REQUEST_P_FILE.
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE_S.
PERFORM VALUE_REQUEST_P_FILE_S.
START OF SELECTION *
START-OF-SELECTION.
To Upload the flat file datas *
PERFORM GET_DATA.
PERFORM UP_LOAD.
PERFORM SUB_UPLOAD.
WRITE :/ 'FOLLOWING ASSETS CREATED'.
WRITE:/ 'OLD ASSET'.
WRITE: 20 'COMPANY'.
WRITE: 30 'SAP CODE'.
LOOP AT IT_DATA WHERE ERR_ASSET NE 'X'.
WRITE :/ IT_DATA-INVZU,
20 IT_DATA-BUKRS, 30 IT_DATA-SAP_ASSET.
ENDLOOP.
SKIP 2.
WRITE :/ 'FOLLOWING SUB ASSETS CREATED'.
WRITE:/ 'OLD ASSET'.
WRITE: 16 'OLD SUB ASSET'.
WRITE: 35 'COMPANY'.
WRITE: 45 'SAP CODE'.
WRITE: 60 'SUB ASSET'.
LOOP AT IT_DATA_SUB WHERE ERR_SUB NE 'X' AND ERR_SUB1 NE 'X'.
WRITE :/ IT_DATA_SUB-INVZU_M,
16 IT_DATA_SUB-INVZU,
35 IT_DATA_SUB-BUKRS, 45 IT_DATA_SUB-ANLN1, 60
*IT_DATA_SUB-SUB_CODE.
ENDLOOP.
*& Form value_request_p_file
FORM VALUE_REQUEST_P_FILE .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'x'
IMPORTING
FILE_NAME = P_PCFILE.
ENDFORM. " value_request_p_file
*& Form UP_LOAD
text
--> p1 text
<-- p2 text
FORM UP_LOAD .
SORT IT_DATA BY INVZU.
SORT IT_DATA2 BY INVZU.
DATA : V_LEN1 TYPE I, V_LEN2 TYPE I, V_SUBSTR1(50) ,V_SUBSTR2(50).
perform open_dataset using dataset.
PERFORM OPEN_GROUP.
LOOP AT IT_DATA.
CONDENSE IT_DATA-TXT50.
V_LEN1 = STRLEN( IT_DATA-TXT50 ).
IF V_LEN1 > 50.
V_SUBSTR1 = IT_DATA-TXT50+0(50).
V_LEN2 = V_LEN1 - 50.
V_SUBSTR2 = IT_DATA-TXT50+50(50).
ELSE.
V_SUBSTR1 = IT_DATA-TXT50.
V_SUBSTR2 = ''..
ENDIF.
REFRESH BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0105'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-BUKRS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'ANLA-ANLKL'
IT_DATA-ANLKL.
PERFORM BDC_FIELD USING 'ANLA-BUKRS'
IT_DATA-BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'ANLA-TXT50'
V_SUBSTR1. "IT_DATA-TXT50.
PERFORM BDC_FIELD USING 'ANLA-TXA50'
V_SUBSTR2.
PERFORM BDC_FIELD USING 'ANLA-SERNR'
IT_DATA-SERNR.
PERFORM BDC_FIELD USING 'ANLA-MENGE'
IT_DATA-MENGE.
*perform bdc_field using 'ANLA-INKEN'
record-INKEN_006.
PERFORM BDC_FIELD USING 'ANLA-INVZU'
IT_DATA-INVZU.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-AKTIV'.
PERFORM BDC_FIELD USING 'ANLA-AKTIV'
IT_DATA-AKTIV.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLZ-PERNR'.
PERFORM BDC_FIELD USING 'ANLZ-PERNR'
IT_DATA-PERNR.
PERFORM BDC_FIELD USING 'ANLZ-KOSTL'
IT_DATA-KOSTL.
PERFORM BDC_FIELD USING 'ANLZ-WERKS'
IT_DATA-WERKS.
PERFORM BDC_FIELD USING 'ANLZ-STORT'
IT_DATA-STORT.
IF IT_DATA-ANLKL = 'VHCL'.
PERFORM BDC_FIELD USING 'ANLZ-KFZKZ'
IT_DATA-KFZKF.
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB04'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ORD42'.
PERFORM BDC_FIELD USING 'ANLA-ORD41'
IT_DATA-ORD41.
PERFORM BDC_FIELD USING 'ANLA-ORD42'
IT_DATA-ORD42.
*perform bdc_field using 'RA02S-EQANZ'
record-EQANZ_014.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB06'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LIFNR'.
PERFORM BDC_FIELD USING 'ANLA-LIFNR'
IT_DATA-LIFNR.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB08'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLV-VSART'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SELZ'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RA02S-XAKPLA(02)'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0195'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLB-AFASL'.
IF IT_DATA-TCODE IS INITIAL.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTD'.
ELSE.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
ENDIF.
PERFORM BDC_FIELD USING 'ANLB-ANLGR'
IT_DATA-ANLGR.
PERFORM BDC_FIELD USING 'ANLB-ANLGR2'
IT_DATA-ANLGR2.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1100'.
IF IT_DATA-TCODE IS INITIAL.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA-ANBTR01_01.
IF H_CHK NE 'X'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(06)'
IT_DATA-ANBTR01_06.
ENDIF.
ELSE.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BZDAT(01)'
IT_DATA-TDATE.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BWASL(01)'
IT_DATA-TCODE.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA-TAMT.
ENDIF.
REFRESH MESSTAB.
CALL TRANSACTION 'AS91' USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
PERFORM BDC_TRANSACTION USING 'AS91'.
ENDLOOP..
PERFORM CLOSE_GROUP.
*perform close_dataset using dataset.
ENDFORM. " UP_LOAD
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_TAB_RAW_DATA = IT_DATA1
I_FILENAME = P_PCFILE
TABLES
I_TAB_CONVERTED_DATA = IT_DATA.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT IT_DATA3.
IF IT_DATA3-ITEM = '1'.
MOVE-CORRESPONDING IT_DATA3 TO IT_DATA.
APPEND IT_DATA.
ELSEIF IT_DATA3-ITEM = '2'.
IT_DATA2-INVZU = IT_DATA3-INVZU.
IT_DATA2-TDATE = IT_DATA3-ANLKL.
IT_DATA2-TCODE = IT_DATA3-BUKRS.
IT_DATA2-TAMT = IT_DATA3-TXT50.
APPEND IT_DATA2.
ENDIF.
ENDLOOP.
IF NOT P_FILE_S IS INITIAL.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_TAB_RAW_DATA = IT_DATA1
I_FILENAME = P_FILE_S
TABLES
I_TAB_CONVERTED_DATA = IT_DATA_SUB.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. " GET_DATA
FORM BDC_DYNPRO
--> PROGRAM
--> DYNPRO
**FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
**ENDFORM. " BDC_DYNPRO
FORM BDC_FIELD
--> FNAM
--> FVAL
**FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
**ENDFORM. "BDC_FIELD
***& Form bdc_transaction
text
-->TCODE text
**FORM BDC_TRANSACTION USING TCODE.
REFRESH MESSTAB.
CALL TRANSACTION TCODE USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
**ENDFORM. " bdc_transaction
*& Form VALUE_REQUEST_P_FILE_S
text
--> p1 text
<-- p2 text
FORM VALUE_REQUEST_P_FILE_S .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'x'
IMPORTING
FILE_NAME = P_FILE_S.
ENDFORM. " VALUE_REQUEST_P_FILE_S
*& Form sUB_upload
text
--> p1 text
<-- p2 text
***FORM SUB_UPLOAD .
DATA : V_LEN1 TYPE I, V_LEN2 TYPE I, V_SUBSTR1(50) ,V_SUBSTR2(50).
LOOP AT IT_DATA_SUB WHERE ERR_SUB NE 'X'.
CONDENSE IT_DATA_SUB-TXT50.
V_LEN1 = STRLEN( IT_DATA_SUB-TXT50 ).
IF V_LEN1 > 50.
V_SUBSTR1 = IT_DATA_SUB-TXT50+0(50).
V_LEN2 = V_LEN1 - 50.
V_SUBSTR2 = IT_DATA_SUB-TXT50+50(50).
ELSE.
V_SUBSTR1 = IT_DATA_SUB-TXT50.
V_SUBSTR2 = ''..
ENDIF.
REFRESH BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=MAST'.
PERFORM BDC_FIELD USING 'ANLA-ANLN1'
IT_DATA_SUB-ANLN1.
PERFORM BDC_FIELD USING 'ANLA-BUKRS'
IT_DATA_SUB-BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'ANLA-TXT50'
V_SUBSTR1. "IT_DATA_SUB-TXT50.
PERFORM BDC_FIELD USING 'ANLA-TXa50'
V_SUBSTR2. "IT_DATA_SUB-TXT50.
****perform bdc_field using 'ANLH-ANLHTXT'
it_data_sub-ANLHTXT_004.
PERFORM BDC_FIELD USING 'ANLA-SERNR'
IT_DATA_SUB-SERNR.
PERFORM BDC_FIELD USING 'ANLA-MENGE'
IT_DATA_SUB-MENGE.
****perform bdc_field using 'ANLA-MEINS'
it_data_sub-MEINS_007.
****perform bdc_field using 'RA02S-XHIST'
it_data_sub-XHIST_008.
PERFORM BDC_FIELD USING 'ANLA-INVZU'
IT_DATA_SUB-INVZU.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-AKTIV'.
PERFORM BDC_FIELD USING 'ANLA-AKTIV'
IT_DATA_SUB-AKTIV.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLZ-GSBER'.
****perform bdc_field using 'ANLZ-GSBER'
it_data_sub-GSBER_011.
****perform bdc_field using 'ANLZ-KOSTL'
it_data_sub-KOSTL_012.
PERFORM BDC_FIELD USING 'ANLZ-STORT'
IT_DATA_SUB-STORT.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB04'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ORD41'.
PERFORM BDC_FIELD USING 'ANLA-ORD41'
IT_DATA_SUB-ORD41.
PERFORM BDC_FIELD USING 'ANLA-ORD42'
IT_DATA_SUB-ORD42.
****perform bdc_field using 'RA02S-EQANZ'
it_data_sub-EQANZ_016.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB07'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LIFNR'.
PERFORM BDC_FIELD USING 'ANLA-LIFNR'
IT_DATA_SUB-LIFNR.
****perform bdc_field using 'ANLA-LIEFE'
IT_DATA_SUB-LIEFE.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB08'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LEART'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SELZ'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'T093T-AFBKTX(01)'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0195'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLB-NDPER'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTD'.
PERFORM BDC_FIELD USING 'ANLB-NDJAR'
IT_DATA_SUB-NDJAR.
PERFORM BDC_FIELD USING 'ANLB-NDPER'
IT_DATA_SUB-NDPER.
****perform bdc_field using 'ANLB-AFABG'
record-AFABG_029.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
IF IT_DATA_SUB-BWASL IS INITIAL.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01_01.
Accu deprn automatically calculated by system changed on 6th Aug.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(06)'
IT_DATA_SUB-ANBTR01_06.
ELSE.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BZDAT(01)'
IT_DATA_SUB-BZDAT.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BWASL(01)'
IT_DATA_SUB-BWASL.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
****perform bdc_transaction using 'AS94'.
ENDIF.
REFRESH MESSTAB.
CALL TRANSACTION 'AS94' USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
IF SY-SUBRC = 0.
READ TABLE MESSTAB INDEX 1.
IT_DATA_sub-SUB_CODE = MESSTAB-MSGV1.
DATA AN1 TYPE ANLN1.
DATA AN2 TYPE ANLN2.
GET PARAMETER ID 'AN2' FIELD AN2.
IT_DATA_SUB-SUB_CODE = AN2. "MESSTAB-MSGV1.
MODIFY IT_DATA_SUB TRANSPORTING SUB_CODE.
ELSE.
IT_DATA_SUB-ERR_SUB1 = 'X'.
MODIFY IT_DATA_SUB TRANSPORTING ERR_SUB1.
ENDIF.
REFRESH BDCDATA.
ENDLOOP.
***ENDFORM. " sUB_upload
****& Form SUB_UPLOAD1
text
***FORM SUB_UPLOAD1 .
LOOP AT IT_DATA_SUB WHERE ERR_SUB NE 'X'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=MAST'.
PERFORM BDC_FIELD USING 'ANLA-ANLN1'
IT_DATA_SUB-ANLN1.
PERFORM BDC_FIELD USING 'ANLA-BUKRS'
IT_DATA_SUB-BUKRS.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB02'.
PERFORM BDC_FIELD USING 'ANLA-TXT50'
IT_DATA_SUB-TXT50.
****perform bdc_field using 'ANLH-ANLHTXT'
it_data_sub-ANLHTXT_004.
PERFORM BDC_FIELD USING 'ANLA-SERNR'
IT_DATA_SUB-SERNR.
PERFORM BDC_FIELD USING 'ANLA-MENGE'
IT_DATA_SUB-MENGE.
****perform bdc_field using 'ANLA-MEINS'
it_data_sub-MEINS_007.
****perform bdc_field using 'RA02S-XHIST'
it_data_sub-XHIST_008.
PERFORM BDC_FIELD USING 'ANLA-INVZU'
IT_DATA_SUB-INVZU.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-AKTIV'.
PERFORM BDC_FIELD USING 'ANLA-AKTIV'
IT_DATA_SUB-AKTIV.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB03'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLZ-GSBER'.
****perform bdc_field using 'ANLZ-GSBER'
it_data_sub-GSBER_011.
****perform bdc_field using 'ANLZ-KOSTL'
it_data_sub-KOSTL_012.
PERFORM BDC_FIELD USING 'ANLZ-STORT'
IT_DATA_SUB-STORT.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB04'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ORD41'.
PERFORM BDC_FIELD USING 'ANLA-ORD41'
IT_DATA_SUB-ORD41.
PERFORM BDC_FIELD USING 'ANLA-ORD42'
IT_DATA_SUB-ORD42.
****perform bdc_field using 'RA02S-EQANZ'
it_data_sub-EQANZ_016.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB07'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LIFNR'.
PERFORM BDC_FIELD USING 'ANLA-LIFNR'
IT_DATA_SUB-LIFNR.
****perform bdc_field using 'ANLA-LIEFE'
IT_DATA_SUB-LIEFE.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TAB08'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-LEART'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=SELZ'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'T093T-AFBKTX(01)'.
PERFORM BDC_DYNPRO USING 'SAPLAIST' '0195'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLB-NDPER'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTD'.
PERFORM BDC_FIELD USING 'ANLB-NDJAR'
IT_DATA_SUB-NDJAR.
PERFORM BDC_FIELD USING 'ANLB-NDPER'
IT_DATA_SUB-NDPER.
****perform bdc_field using 'ANLB-AFABG'
record-AFABG_029.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ALTB'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01_01.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(06)'
IT_DATA_SUB-ANBTR01_06.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BZDAT(01)'
IT_DATA_SUB-BZDAT.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-BWASL(01)'
IT_DATA_SUB-BWASL.
PERFORM BDC_FIELD USING 'RALT_DYNP_STRUC-ANBTR01(01)'
IT_DATA_SUB-ANBTR01.
PERFORM BDC_DYNPRO USING 'SAPLALTD' '1200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'ANLA-ANLN1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BUCH'.
****perform bdc_transaction using 'AS94'.
REFRESH MESSTAB.
CALL TRANSACTION 'AS94' USING BDCDATA
MODE H_MODE
UPDATE 'S'
MESSAGES INTO MESSTAB.
IF SY-SUBRC = 0.
READ TABLE MESSTAB INDEX 1.
IT_DATA_sub-SUB_CODE = MESSTAB-MSGV1.
DATA AN1 TYPE ANLN1.
DATA AN2 TYPE ANLN2.
GET PARAMETER ID 'AN2' FIELD AN2.
IT_DATA_SUB-SUB_CODE = AN2. "MESSTAB-MSGV1.
MODIFY IT_DATA_SUB TRANSPORTING SUB_CODE.
ELSE.
IT_DATA_SUB-ERR_SUB1 = 'X'.
MODIFY IT_DATA_SUB TRANSPORTING ERR_SUB1.
ENDIF.
REFRESH BDCDATA.
ENDLOOP.
***ENDFORM. " sUB_upload
and one more thing i face some issues when doing bdc for AS01, so i use AS91 and AS92 for uploading by using LSMW (direct input method and recording method) and it was successful.(if u have to do coding go for BDC/BAPI or there is no coding better to choose LSMW (it is the easiest way) as of my knowledge, so before starting just analyze once which method is best for ur requirement.
Reward Points for Useful Answers
Thanks
Naveen khan
Message was edited by:
Pattan Naveen

Vendor Master (XK02) - Missing Screen fields in BDC recording.

Hi All,
I have extended IDOC type cremas03 to add some extended fields (sort1 and sort2) which are not in the standard IDOC. In the exit ZXVSVU04, I plan on doing a call transaction to XK02 to update the required fields. In my BDC recording, the two fields are not available, but are available when not in BDC both in change and create. I have also tried recording FK02 and this behaves the same way. Is there a way of having these fields added so they are available in the BDC session?
Best regards,
James.

Hi
Really strange ...
What all comes in the last section of the Web page, when you are using BBPMAINTINT transaction in SRM4.0?
Look carefully, below the email option, there is an option for FTP as well.
OR
Is email option is coming as a drop-down list ?
Hope this will help.
Please reward suitable points.
Regards
- Atul

Capturing warning message in BDC recording

Hi all,
I want to capture a warning message that is getting popped during BDC recording. When BDC is ran in background, it is stopping at that point and further processing is stopped with the display of this warning message.
Can anybody help me in capturing this warning message?
Thanksm
Archana

Hi Avinash,
I am trying to change the profit center using this BDC. So, when i change it, this warning is displayed and it goes inside one more window and coreects the new profit center added in the previous window. So, this warning message is necessary to be displayed. But my problem is that because of this message my BDC is also not proceeding further.
Hi Bhavesh,
The warning message is getting displayed as a pop-up. I am not getting any information about the screen number. I know the prgram for that but no the screen number. And can you please tell me what that piece of code does? So that i can try it out in my BDC.
Thanks,
Archana

Handling popups in bdc recording

Hi,
I am doing bdc recording for a transaction, and there is a popup screen to be handled by the user, but when i am doing recording it is not recording the popup menus. can you please tel me how i can handle popups in BDC recording.
It is very urgent.
Thank you.

Hi Ameen,
Award points if useful...
Step by Step approach to ceate simple BDC session program using reusable template.
This step by step approach can be used to create a Simple BDC program i.e for a transaction which does not have any table control / looping at screen table. The same can also be enhanced to develop a program for transactions involving table controls .
1. Create a new program as executable program using SE38 transaction code.
2. Copy the following template code into your program .
---- Start of Template -
REPORT NO STANDARD PAGE HEADING LINE-SIZE 200 LINE-COUNT 300.
*-- DATA DECLARATION--
*---Types
DATA : BEGIN OF t_upload,
FIELD1(10),
FIELD2(2),
FIELD3(18),
FIELD4(35),
END OF t_upload.
*--- Tables
DATA : BEGIN OF i_bdcdata OCCURS 0."to hold the transaction record
INCLUDE STRUCTURE bdcdata.
DATA: END OF i_bdcdata.
DATA: i_upload LIKE STANDARD TABLE OF t_upload," to hold file data.
i_upload1 LIKE STANDARD TABLE OF t_upload." to hold file data.
*--- Work Areas
DATA: wa_upload2 LIKE t_upload,
wa_upload LIKE t_upload,
wa_upload1 LIKE t_upload.
*--- Variables
DATA: v_count1(4) TYPE n,
v_error TYPE c,
v_session(12),
v_field(21) TYPE c,
v_message(60) type 'C'.
*--Constants
DATA: c_open TYPE c VALUE '(',
c_close TYPE c VALUE ')',
c_x TYPE c VALUE 'X'.
*---Initialisation
initialization.
refresh : i_upload , i_upload1 ,i_bdcdata.
-------Selection Screen Design -
*Selection screen for input of upload file address
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
---AT SELECTION SCREEN -
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*--For popup to select file.
PERFORM give_help.
-----START OF SELECTION -
START-OF-SELECTION.
*--Data upload using WS_Upload.
PERFORM get_data.
*-- OPEN SESSION
PERFORM open_group.
*--Insert transactions using BDCDATA table in the session.
PERFORM do_transaction .
*-- Close the session.
PERFORM close_group.
END-OF-SELECTION.
*& Form f_get_data
For data upload from external file.
FORM get_data.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_upload
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
DELETE I_UPLOAD INDEX 1.
ENDIF.
ENDFORM. " f_get_data
*& Form F_open_group
To open session in session management.
FORM open_group.
v_session = 'TCODE'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = v_session
user = sy-uname
keep = 'X'.
ENDFORM. " F_open_group
*& Form f_do_transaction
Insert transactions in session after passing values to BDCDATA
FORM do_transaction.
LOOP AT i_upload INTO wa_upload .
*---- insert your generated codes from recording at SHDB here
*----- insertion ends
perform bdc_transaction using 'TCODE'.
REFRESH : I_BDCDATA.
CLEAR : WA_UPLOAD.
ENDIF.
ENDLOOP.
ENDFORM. " f_do_transaction
*& Form bdc_dynpro
For appending screen details to BDCDATA
FORM bdc_dynpro USING program dynpro.
CLEAR i_bdcdata.
i_bdcdata-program = program.
i_bdcdata-dynpro = dynpro.
i_bdcdata-dynbegin = 'X'.
APPEND i_bdcdata.
CLEAR i_bdcdata.
ENDFORM. "bdc_dynpro
*& Form bdc_field
For appending field details to bdcdata table
FORM bdc_field USING fnam fval.
CLEAR i_bdcdata.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
APPEND i_bdcdata.
CLEAR i_bdcdata.
ENDFORM. " bdc_field
*& Form bdc_transaction
For inserting Transaction in the session
FORM bdc_transaction USING tcode.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = tcode
TABLES
dynprotab = i_bdcdata.
ENDFORM. " bdc_transaction
*& Form F_close_group
For closing the session created in Session manager SM35
FORM close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
concatenate 'Session ' v_session 'successfully created' into v_field.
MESSAGE v_field type 'I'..
CALL TRANSACTION 'SM35'.
ENDFORM. "f_close_group
*& Form f_give_help
For user help to select file
FORM give_help.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
mask = ',.,..'
mode = 'O'
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc <> 0 AND NOT sy-msgty IS INITIAL.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f_give_help
---- End of Template -
3.Go to the transaction SHDB in another session ( you can also give TCODE - OSHDB in transaction code window and hit enter ).
4.Create you transaction recording in SHDB . Ensure your transaction recording takes care of input values to all the
fields to which you intend to pass values in the BDC.
5.Once your recording is done correctly create the program from recording in the SHDB transction . You will find the button to create program in SHDB . Choose the option of creating from file when you proceed through the subsequent steps.
6. Define data type t_upload and structure wa_upload in the template program with fields of structure 'RECORD' from the program generated using SHDB recording ( replace the field1, field2 and so on as per your requirement). For your understanding you can remove the suffixes to the
field name but keep the field size unchanged.
7.Copy the coding existing between 'do' and 'enddo' statement from the generated program . Insert the copied code between the loop and endloop code of form 'Do_transaction '. Replace fields of structure 'RECORD' with respective fields of structure wa_upload.Insert constant values wherever possible in transaction recording.You can also handle customised data conversions here.
8.Replace 'TCODE' in the template program with the transaction code you intend to process in this BDC.
9.Please carry out further syntax check and resolve the related issues.
This program will provide for input help to select upload file from local machine. The file needs to be in Tab delimited format and is assumed to have first row as column headers .
On successful creation of session you will be prompted with a Information popup giving the name of session ,and will take you to the SM35 transaction to process your session.

BDC Recording for uploading data into Fi01

HI,
I need to upload date from a file into SAP Fi01 transaction
i used a sample program and added my bdc recording to it as per instrucrion
there is a error while uploading.
i believe it is at the place i am pointing in bold. it is at read dataset. could you advice me how to solve it.
CODE:
REPORT Z_BANK_DIRECTORY
NO STANDARD PAGE HEADING
LINE-SIZE 200
LINE-COUNT 300.
*-- DATA DECLARATION--
*---Types
DATA : BEGIN OF t_upload,
data element: BANKS
        BANKS_001(003),
data element: BANKK
        BANKL_002(015),
data element: BANKA
        BANKA_003(060),
data element: REGIO
        PROVZ_004(003),
data element: STRAS_GP
        STRAS_005(035),
data element: ORT01_GP
        ORT01_006(035),
data element: BRNCH
        BRNCH_007(040),
data element: SWIFT
        SWIFT_008(011),
data element: BGRUP
        BGRUP_009(002),
data element: AD_TITLETX
        TITLE_MEDI_010(030),
data element: AD_NAME1
        NAME1_011(040),
data element: AD_STRSPP1
        STR_SUPPL1_012(040),
data element: AD_STRSPP2
        STR_SUPPL2_013(040),
data element: AD_STREET
        STREET_014(060),
data element: AD_CITY2
        CITY2_015(040),
data element: AD_CITY3
        HOME_CITY_016(040),
data element: AD_PSTCD1
        POST_CODE1_017(010),
data element: LAND1
        COUNTRY_018(003),
data element: AD_POBX
        PO_BOX_019(010),
data element: AD_PSTCD2
        POST_CODE2_020(010),
data element: SPRAS
        LANGU_021(002),
data element: AD_TLNMBR1
        TEL_NUMBER_022(030),
data element: AD_MBNMBR1
        MOB_NUMBER_023(030),
data element: AD_FXNMBR1
        FAX_NUMBER_024(030),
data element: AD_SMTPADR
        SMTP_ADDR_025(132),
data element: BANKA
        BANKA_026(060),
data element: REGIO
        PROVZ_027(003),
data element: STRAS_GP
        STRAS_028(035),
data element: ORT01_GP
        ORT01_029(035),
data element: BRNCH
        BRNCH_030(040),
data element: SWIFT
        SWIFT_031(011),
data element: BGRUP
        BGRUP_032(002),
END OF t_upload.
*--- Tables
DATA : BEGIN OF i_bdcdata OCCURS 0."to hold the transaction t_upload
INCLUDE STRUCTURE bdcdata.
DATA: END OF i_bdcdata.
DATA: i_upload LIKE STANDARD TABLE OF t_upload," to hold file data.
i_upload1 LIKE STANDARD TABLE OF t_upload." to hold file data.
*--- Work Areas
DATA: wa_upload2 LIKE t_upload,
wa_upload LIKE t_upload,
wa_upload1 LIKE t_upload.
*--- Variables
DATA: v_count1(4) TYPE n,
v_error TYPE c,
v_session(12),
v_field(21) TYPE c,
v_message(60) type C.
*--Constants
DATA: c_open TYPE c VALUE '(',
c_close TYPE c VALUE ')',
c_x TYPE c VALUE 'X'.
*---Initialisation
initialization.
refresh : i_upload , i_upload1 ,i_bdcdata.
-------Selection Screen Design -
*Selection screen for input of upload file address
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
---AT SELECTION SCREEN -
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*--For popup to select file.
PERFORM give_help.
-----START OF SELECTION -
START-OF-SELECTION.
*--Data upload using WS_Upload.
PERFORM get_data.
*-- OPEN SESSION
PERFORM open_group.
*--Insert transactions using BDCDATA table in the session.
PERFORM do_transaction .
*-- Close the session.
PERFORM close_group.
END-OF-SELECTION.
*& Form f_get_data
For data upload from external file.
FORM get_data.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_upload
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
DELETE I_UPLOAD INDEX 1.
ENDIF.
ENDFORM. " f_get_data
*& Form F_open_group
To open session in session management.
FORM open_group.
v_session = 'FI01'.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
client = sy-mandt
group = v_session
user = sy-uname
keep = 'X'.
ENDFORM. " F_open_group
*& Form f_do_transaction
Insert transactions in session after passing values to BDCDATA
FORM do_transaction.
LOOP AT i_upload INTO wa_upload .
*---- insert your generated codes from recording at SHDB here
read dataset <b>wa_upload</b> into t_upload.
if sy-subrc <> 0. exit. endif.
perform bdc_dynpro      using 'SAPMF02B' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'BNKA-BANKL'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BNKA-BANKS'
                              t_upload-BANKS_001.
perform bdc_field       using 'BNKA-BANKL'
                              t_upload-BANKL_002.
perform bdc_dynpro      using 'SAPMF02B' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'BNKA-BGRUP'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ADDR'.
perform bdc_field       using 'BNKA-BANKA'
                              t_upload-BANKA_003.
perform bdc_field       using 'BNKA-PROVZ'
                              t_upload-PROVZ_004.
perform bdc_field       using 'BNKA-STRAS'
                              t_upload-STRAS_005.
perform bdc_field       using 'BNKA-ORT01'
                              t_upload-ORT01_006.
perform bdc_field       using 'BNKA-BRNCH'
                              t_upload-BRNCH_007.
perform bdc_field       using 'BNKA-SWIFT'
                              t_upload-SWIFT_008.
perform bdc_field       using 'BNKA-BGRUP'
                              t_upload-BGRUP_009.
perform bdc_dynpro      using 'SAPLSZA1' '0201'.
perform bdc_field       using 'BDC_CURSOR'
                              'SZA1_D0100-SMTP_ADDR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CONT'.
perform bdc_field       using 'SZA1_D0100-TITLE_MEDI'
                              t_upload-TITLE_MEDI_010.
perform bdc_field       using 'ADDR1_DATA-NAME1'
                              t_upload-NAME1_011.
perform bdc_field       using 'ADDR1_DATA-STR_SUPPL1'
                              t_upload-STR_SUPPL1_012.
perform bdc_field       using 'ADDR1_DATA-STR_SUPPL2'
                              t_upload-STR_SUPPL2_013.
perform bdc_field       using 'ADDR1_DATA-STREET'
                              t_upload-STREET_014.
perform bdc_field       using 'ADDR1_DATA-CITY2'
                              t_upload-CITY2_015.
perform bdc_field       using 'ADDR1_DATA-HOME_CITY'
                              t_upload-HOME_CITY_016.
perform bdc_field       using 'ADDR1_DATA-POST_CODE1'
                              t_upload-POST_CODE1_017.
perform bdc_field       using 'ADDR1_DATA-COUNTRY'
                              t_upload-COUNTRY_018.
perform bdc_field       using 'ADDR1_DATA-PO_BOX'
                              t_upload-PO_BOX_019.
perform bdc_field       using 'ADDR1_DATA-POST_CODE2'
                              t_upload-POST_CODE2_020.
perform bdc_field       using 'ADDR1_DATA-LANGU'
                              t_upload-LANGU_021.
perform bdc_field       using 'SZA1_D0100-TEL_NUMBER'
                              t_upload-TEL_NUMBER_022.
perform bdc_field       using 'SZA1_D0100-MOB_NUMBER'
                              t_upload-MOB_NUMBER_023.
perform bdc_field       using 'SZA1_D0100-FAX_NUMBER'
                              t_upload-FAX_NUMBER_024.
perform bdc_field       using 'SZA1_D0100-SMTP_ADDR'
                              t_upload-SMTP_ADDR_025.
perform bdc_dynpro      using 'SAPMF02B' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'BNKA-BANKA'.
perform bdc_field       using 'BDC_OKCODE'
                              '=UPDA'.
perform bdc_field       using 'BNKA-BANKA'
                              t_upload-BANKA_026.
perform bdc_field       using 'BNKA-PROVZ'
                              t_upload-PROVZ_027.
perform bdc_field       using 'BNKA-STRAS'
                              t_upload-STRAS_028.
perform bdc_field       using 'BNKA-ORT01'
                              t_upload-ORT01_029.
perform bdc_field       using 'BNKA-BRNCH'
                              t_upload-BRNCH_030.
perform bdc_field       using 'BNKA-SWIFT'
                              t_upload-SWIFT_031.
perform bdc_field       using 'BNKA-BGRUP'
                              t_upload-BGRUP_032.
*----- insertion ends
perform bdc_transaction using 'FI01'.
REFRESH : I_BDCDATA.
CLEAR : WA_UPLOAD.
ENDIF.
ENDLOOP.
ENDFORM. " f_do_transaction
*& Form bdc_dynpro
For appending screen details to BDCDATA
FORM bdc_dynpro USING program dynpro.
CLEAR i_bdcdata.
i_bdcdata-program = program.
i_bdcdata-dynpro = dynpro.
i_bdcdata-dynbegin = 'X'.
APPEND i_bdcdata.
CLEAR i_bdcdata.
ENDFORM. "bdc_dynpro
*& Form bdc_field
For appending field details to bdcdata table
FORM bdc_field USING fnam fval.
CLEAR i_bdcdata.
i_bdcdata-fnam = fnam.
i_bdcdata-fval = fval.
APPEND i_bdcdata.
CLEAR i_bdcdata.
ENDFORM. " bdc_field
*& Form bdc_transaction
For inserting Transaction in the session
FORM bdc_transaction USING tcode.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
tcode = 'FI01'
TABLES
dynprotab = i_bdcdata.
ENDFORM. " bdc_transaction
*& Form F_close_group
For closing the session created in Session manager SM35
FORM close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
concatenate 'Session ' v_session 'successfully created' into v_field.
MESSAGE v_field type 'I'..
CALL TRANSACTION 'SM35'.
ENDFORM. "f_close_group
*& Form f_give_help
For user help to select file
FORM give_help.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
mask = ',.,..'
mode = 'O'
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc <> 0 AND NOT sy-msgty IS INITIAL.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f_give_help
---- End of Template -

Actually, there is no need for the dataset statemant at all. Comment that out, and add a line that moves the data from wa_upload to t_upload, or you could change the rest of the references to point to wa_upload and forget about t_upload. Your choice.
LOOP AT i_upload INTO wa_upload .
*---- insert your generated codes from recording at SHDB here
*read dataset wa_upload into t_upload.
*f sy-subrc <> 0. exit. endif.
t_upload = wa_upload.
Regards,
RIch Heilman

BDC recording steps

could anyone help me out in knowing the BDC recording steps in detail for co11n.
regards
ray

Hi,
Steps used in Recording
1) Start by going to SHDB transaction. There, on top left corner, you will see the "New Recording" button.
2) After clicking on the new recording button, you will be presented with a screen to specify the name of this recording, AND, the transaction which you want to record. Fill these up, and click on "Start Recording" button.
3) Handle the transaction just like normal. However, you should know that all that you do in the transaction are captured.
4) Once you finish the transaction, the screen will return to SHDB transaction. You will see a number of instructions. This is not of much interest to us at this point. Just save this recording by clicking on the "Save" icon at the top.
5) Once saved, click on the "Back" button to display a list of recordings. By default, the recording you just did will be the only one shown on the screen.
6) Select this row, and then, click on "Generate Program" from the top middle tool bar.
7) Select the program type as executable, and fill up other attributes, like short description..etc.
8) When asked for a package, for now, select the local object.
Usually, what you will be doing, is to use this code that is generated as a skeleton, and the data will be got dynamically.
regards ,
Stephen.
Reward if it is useful.

Problem in BDC Recording

Hi I am having a problem in BDC Recording. My requirement is that when I input data in transaction fb02 to block the invoices, It shows a list of invoices. Now i need to double click that item(line) in which PK = 06 at runtime during bdc recording. During BDC recording it takes the line number on which we have clicked which is constant but i want it dynamic that if item 1 is having PK=6, that line should be double clicked and if item 3 is having PK=6, the third item should be double clicked to open another screen. Kindly help me... Thanks in advance.

Hi Ravi,
While writing your code that is in your code you know which line number is having the PK = 06, then you can use the same line number and add the code for double click after that.
Regards,
Atish

Material Master BDC recording

hi gurus,
i am trying to do a material master creation using BDC recording,
i am new i dont know how to modify the code,
the following is the code, please let me know how to make changes.
report ZTEST95
       no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case default
                              'C:\Documents and Settings\Deskt'
                            & 'op\test95.txt'.
   DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
      '* data element: ' followed with the data element
      which describes the field.
      If you don't have a data element use the
      comment without a data element name
3.) The second line shows the fieldname of the
      structure, the fieldname must consist of
      a fieldname and optional the character '_' and
      three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record,
data element: MATNR
        MATNR_001(040),
data element: MBRSH
        MBRSH_002(001),
data element: MTART
        MTART_003(004),
data element: REF_MATNR
        MATNR_004(040),
data element: XFELD
        KZSEL_01_005(001),
data element: MAKTX
        MAKTX_006(040),
data element: MEINS
        MEINS_007(003),
data element: MATKL
        MATKL_008(009),
data element: SPART
        SPART_009(002),
data element: MTPOS_MARA
        MTPOS_MARA_010(004),
data element: BRGEW
        BRGEW_011(017),
data element: GEWEI
        GEWEI_012(003),
data element: NTGEW
        NTGEW_013(017),
      end of record.
End generated data section ***
start-of-selection.
perform open_dataset using dataset.
perform open_group.
do.
read dataset dataset into record.
if sy-subrc <> 0. exit. endif.
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MATNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'RMMG1-MATNR'
                              record-MATNR_001.
perform bdc_field       using 'RMMG1-MBRSH'
                              record-MBRSH_002.
perform bdc_field       using 'RMMG1-MTART'
                              record-MTART_003.
perform bdc_field       using 'RMMG1_REF-MATNR'
                              record-MATNR_004.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                              record-KZSEL_01_005.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MAKT-MAKTX'
                              record-MAKTX_006.
perform bdc_field       using 'MARA-MEINS'
                              record-MEINS_007.
perform bdc_field       using 'MARA-MATKL'
                              record-MATKL_008.
perform bdc_field       using 'MARA-SPART'
                              record-SPART_009.
perform bdc_field       using 'MARA-MTPOS_MARA'
                              record-MTPOS_MARA_010.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-BRGEW'.
perform bdc_field       using 'MARA-BRGEW'
                              record-BRGEW_011.
perform bdc_field       using 'MARA-GEWEI'
                              record-GEWEI_012.
perform bdc_field       using 'MARA-NTGEW'
                              record-NTGEW_013.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
perform bdc_transaction using 'MM01'.
enddo.
perform close_group.
perform close_dataset using dataset.
thanks.

Hi,
It is better if the Material Master creation step is done by LSMW - Direct Input method with the following object:
Object               0020   Material master
Method               0000
Program name         RMDATIND
Program type         D   Direct input
Check the program documentation for more details.
For a sample data file generation ( Sequential file ), check the program RMDATGEN
If the reqmt., is for a repetetive loading of Material Master you could schedule / execute the LSMW by following program: /SAPDMC/SAP_LSMW_INTERFACE.
Hope this helps.
Best Regards, Murugesh

Need help for bdc recording TC fp05

Hi,
My requirement is: I want to create a Payment lot using fp05 and then post
it through a program.
First i want to know is there any BAPI available to do that.
I couldnt find any BAPI. That is why i did BDC Recording. The recording is working till Payment Lot creation. But after creation when i try to post the lot, it is giving status as "Direct Posting Stopped". Again if i come out of the program and then manually post it, it is working fine. But through program if i try to post it, it is giving status as "Direct Posting Stopped".
Is this because we cannot Post a Payment Lot programatically or some Authorisation issue is there.
Can anyone respond immediately
Regards,
Sheron

Hi Raj,
May be this can be useful.
BAPI_INSPOPER_RECORDRESULTS
You can search other in se37 BAPIINSP.
Regards,
Amit Mittal.

What is the tcode for bdc recording and how to do in hr-abap for pa and om

hi,
I need to do the bdc recording for pa and om. So, can any of you tell me how to do and what are the tcodes we have to use.
thanks & regards,
Sekhar.

Hi ,
Here is the link from you will get all the transaction code
http://www.sap-basis-abap.com/saphr004.htm
As far PA specfic some tcodes are given below
PA20 Display HR Master Data
PA30 Maintain HR Master Data
PA40 Personnel Actions
PA41 Correct Actions
PA42 Fast Entry for Actions
PA46 Import from Resumix
PA47 Export to Resumix
PA48 Hiring from non-SAP system
PA51 Display Time Data
PA53 Display Time Data
PA61 Maintain Time Data
PA62 List Entry of Additional Data
PA63 Maintain Time Data
PA64 Calendar Entry
PA70 Fast Entry
PA71 Fast Entry of Time Data
PA88 Benefits
For OM specific
PP01 Maintain Plan Data (menu-guided)

How to use BDC recording in Workflow.

Hi experts,
Anyone kindly help me for the following case...
If sales order gets created, mail has to be sent to every user. Also for that sales order, delivery should be created in background and again mail has to be sent to all users...
I m clear with sending mail. but i m struggled while creating delivery in background. i dont know how to do this. I hav an idea that it can be created using BDC recording and this recording program can be called in our method which is created in our business object.
How to create a single BDC recording to create sales order as well as creating delivery in background... Is it possible to do like this. Or is there any function module to create delivery in background with respect to sales order number?
kindly give some suggestion and step by step procedure to do this...
Thanks in advance...
Regards
Raaams...

Hi Ram
Check this BAPI once BAPI_OUTB_DELIVERY_CREATE_SLS.
If this doesnt help do BDC recording and create a FM with the help of BDC recording. Please note that Call Transaction should happen in background otherwise your BDC wont work.
Please revert back if you have any queries.
Regards,
Gautham Paspala

Problem with SM37 BDC recording

Hi ,
I want to change the output device for the job scheduled of 1000 pgms in SM37.
For this i am using BDC recording.
But when i run the recording, it does not fill the data and does not move from 1 screen to other screen.
I have checked the recording, and everything got recorded.
Please suggest .
Thanks in advance.
Rgds/Abhi

Hi,
Why not make things simpler by using FM BP_CHANGE_JOB_STEP. Parameters required are:
JOBNAME
JOBCOUNT
STEP-PROGRAM & STEP-TYP (equal to 'A')
STEP_NUM
ALLPRIPAR-PDEST
Presumably you will have the info for JOBNAME, JOBCOUNT etc from your BDC feed. To preserve the rest of the print parameters then use something like FM BP_JOB_READ and fill in ALLPRIPAR fields.
Thanks,
Pete

Why some screens are hiddens in BDC record mode?

I'm trying to create a BDC record in VA01 transaction but in this mode some screens are hidden just like screen "Material substitution(selecting a material)" Dynpro 800 Program "SAPMV45A"
Is it possible to show this screen in BDC recorder? how can i do it?
Regards

Hi,
i´m no expert in this but for a recording of material substitution you could try with transactions VB12 or VB13
Best regards.

BDC Recording..Points Guranteed

Similar Messages

Maybe you are looking for