Beginners question: how to set a number of repeats for an operation

Seems like a pretty basic feature, but I cant figure it out ...
I want Illustrator to create a certain number of random color-swatches but would like to avoid copy-pasting the relevant parts of the script that many times into the jsx-file.
How can I set such a number or get the script to go back to a certain line until the doc.swatches.length reaches the intended number?
Any help appreciated.
Illustrator 13.0.2 on Mac OSX 10.4.11

Use a for loop: var numSwatches=prompt("How many Swatches do you want?", 12); for(i=0;i<numSwatches;i++){ [do stuff]; } JET

Similar Messages

How to set the number of rings for the agent phone rings before it get the not prepared state

hi, how to set the number of rings for the agent phone rings? before it get the not prepared state.
thanks

The following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
What you are looking for is called "Ring no answer time". It is set in the Agent Desk Setting List tool.
Regards,
Kevin

How to set the number of sockets for batch processing at runtime?

Hello all,
I need to change the execution model at runtime. I have achieved this by setting the 'ModelPath' property of the sequence file at runtime. When I set the sequence file model as batchmodel, i need to set the number of test sockets also dynamically. How can this be done? Once i set the number of sockets, i would also have to set the UUT serial number for each socket. Please help me out in solving this.
Thanks and Regards
Madhu Srinivasan.

Hi Madhu,
You can do this by inserting a sequence file callback into your main sequence and choose the ModelOptions callback. You can then use the expression step to set the "Parameters.ModelOptions.NumTestSockets" value to whatever you want. If you then use the Test UUTs execution entry point you will be prompted for serial numbers automatically. You could also use this same procedure but alter the ModelOptions callback in the process model directly, either way works just as well but I think that using a sequence file callback gives a bit more flexibility in the system.
Hope this helps,
Nick

How to set the number of averages for doing octave analysis

Hi
I am using a 4472 DAQ for continuously acquiring time domain signal and doing octave band analysis using Sound and vibration tool kit. How can we set the number of averages while doing the Octave analysis. All the other FFT vi like FRF, Auto Spectrum, Cross Spectrum have an option for setting the number of averages and then the vi runs for those many averages and it stops. How this same logic can be applied while doing octave analysis.
Regards,
Ankit

Hi Ankit,
You may want to consider using the VI in a for loop. By wiring the "number of averages you wish to complete" to the count terminal ("N'), you can control how many times the VI runs.
Hope this helps,
Jennifer O.

How to set unknown number of binds for dynamic setWhereClause? - Urgent!

Hi,
I have a requirement wherein i would have to pass unknown bind parameters to the where clause of the sql query in the VO at runtime.
Ex: Select a, b, c from XYZ where a in (....).
How do i achieve this using the setWhereClause for the condition "*where a in (:1, :2, ...)*" - the number of arguments is unknown in the IN condition.
Thanks.

Hi Sumit,
Thanks for the quick reply,
But my problem is:
1. the initQuery will have a variable number of arguments so the below code wont help i guess, because i wouldn't know how many i will have to pass.
void initQuery(String value1, String value2, String value3)
this.setWhereClause(null);
this.setwhereClauseparams(null);
this.setWhereClause("a in ("value1", "value2", "value3");");
this.executeQuery();
2. The second suggestion i guess would work, but i don't know how to go about this, the parameters that i need to pass to this unique bind parameter would be number type.
Another option is to have a unique bind parameter (:1) in the VO query
Select a, b, c from XYZ where a in (:1)
But you have comma separated values in the string which you bind for :1 (eg "xyz,abc,dfg" )
Thanks.

How to set required number of days for the user passwords to expire

How do I set the duration when users are required to change their passwords? This is an internal control measure to ensure control over users' logins.
Thanks a lot.

You can also set the lifetime of a single password dependent on it's "idle" status:
- Initial password at user creation. (e.g. 5 days)
- Reset password by admin. (e.g. 1 day)
- Productive password not used (e.g 91 days)
.. and the minimum validity of the password, regardless of how often it is used (not idle).
- Productive password expiration time. (e.g. 90 days)
You can also manually observe what is going on via report/transaction RSUSR200.
If you take a look at the documentation on the parameters in the link already provided, you will see the logic and the dependencies between them. The selection fields of RSUSR200 reflect the same.
How you rate the risk of passwords and these settings, also depends on many other things - most notably how disciplinced admins are at using the password wizard (in my opinion).
Cheers,
Julius

How to set page number & current date in sqlplus result

how to set page number & current date in sqlplus result

Hi,
Use the TTITLE command. For example:
SET     PAGESIZE     15
TTITLE     LEFT &_date     RIGHT "Page:" FORMAT 999 sql.pno     SKIP 2
SELECT     ROWNUM
,     ename
FROM     scott.emp
;Output:
12-Jan-2011                    Page:   1
    ROWNUM ENAME
         1 SMITH
         2 ALLEN
         3 WARD
         4 JONES
         5 MARTIN
         6 BLAKE
         7 CLARK
         8 SCOTT
         9 KING
        10 TURNER
12-Jan-2011                    Page:   2
    ROWNUM ENAME
        11 ADAMS
        12 JAMES
        13 FORD
        14 MILLER
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and the results you want from that data. If your question is based on commonly available tables, like those in the scott schema, then you don't have to post any sample data: just post the output.
Explain how you get those results from that data.
Always say what version of Oracle (and other relevant softward, SQL*Plus in this case) you're using.

How to set the number of seconds a servlet is allowed to run

I use JSP to generate a report, but it will take about 10 minutes to search.
IE Client screen displays an error message what is "Cannot find out your page" after 8 minutes. How to set the number of seconds a servlet is allowed to run.

It's not a matter of how long the servlet is running... it's the browser timing out because the servlet hasn't responded to its request.
You have several options:
1) "Browser Pinging"
Your servlet sends some small data which can be either seen or unseen (html comments, hidden chars, etc) by the user at short intervals while your report is running. When the report is finished, the browser will not have timed out because it has been "snacking" on those small bits of data which tell the browser its original request was both heard and being handled. I don't think there is any timeout in IE as long as it receives data continually (or at least before its own timeout mark over and over again...)
2) Multithreaded processing
This would probably be a better approach. Have the report run in a separate thread running on the server. You'd want to store a reference to this executing report in the user's session. Instead of making the browser wait for the report to be finished, have the servlet check the user's session to see if a report exists and is running. If one does not exist, create one and start its execution. If one does exist, and is still running, print a "please wait" type of message OR an animation, etc... along with some javascript which will reload the page every few seconds. If the page reloads and the servlet sees that the report is finished, it can then display it to the user.
Hope this helps,
-Scott

How to set maximum number of jobs in oracle

Could pls tell explain me about how to set maximum number of jobs in oracle....
Regd,
Mahi

I don't think there is any limit on number of jobs that can be submitted to Oracle. However, there is a limit on the number of processes that would execute those jobs (governed by JOB_QUEUE_PROCESSES).
Message was edited by:
Satish Kandi
Typo corrected.

How to set change number is prerequisite when change BOM?

Dear SAP Experts,
I have actived EC management in BOM control data in IMG. But when i changed
BOM ( the code CS02 ) with change number blank, system had not given an error message. SO,how to set change number is prerequisite when change BOMs?
Thanks...
Regards,
Joey.

Just a guess: Transaction os27 and change the number range to external.
Matthias

How to set request number of info package using start routine

Hi All,
I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
Thanks
Sangita

You'll probably want to do this in a start routine. It is probably not advisable to hard-code the technical name of the InfoPak. They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
I would do a SQL select like this in a start routine, and then filter based on the results of the SQL. You'll probably want to sort the results by date and time, both descending. Or do a MAX in the SQL.
Please let me know if this isn't clear.
select q~rnr q~logdpid q~tdatum q~tuzeit
from rsreqdone as q
inner join rsldpio as p
on p~logdpid = q~logdpid
where p~objvers = 'A'
and p~logdpid like 'ZPAK%'
and p~source = 'your data source'

How to set the number of rings before voice mail answers?

How to set the number of rings before voice mail answers?

For me its:
1. Open the phone app and dial *#61# on the Keypad. Press the Call button.
2. Locate this text on the screen: "Setting Interrogation Succeeded, Voice Call Forwarding, When Unanswered, Forwards to +" and record the 11-digit number after the + symbol.
3. Touch the Dismiss button. Now enter this code on the Keypad: *61*+ followed by the 11-digit Forwards to number recorded in step 2, followed by *11 and *ringtime#. Ringtime is the number of seconds you want your iPhone to ring before voicemail picks up. Your finished code should look something like this:
*61*+18555513466*11*30#
In the example above the ring time is set to 30 seconds. Press the Call button.
4. You should receive the message: Setting Activation Succeeded. Press Dismiss and next time you receive a call it will ring for the new amount of time before going to voicemail.

New comer ask 2 simple questions:how to set the use of the right click of

New comer ask 2 simple questions:how to set the use of the right click of your mouse?
I don't know why when i click the right button of my mouse in logic, sometimes it's the same funcion as my left one, some times it's the same function that opens the tool menu....But in MacOSX,it's all okay.Just the weired thing in logic ,please help
2.is there any kind of filter in Score? I mean, in midi track I have a C1 note, and I don't want the C1 note shown in my score, I want every note show which are above C2, like a filter. I think this is helpful dealling with some keyswich things,how can we do that?

In Preferences -> Global -> Editing you can choose weather right click is assignable or opens the tools box.
Not to sure about the score dude

Simple question: How to set a different image to each side of a 3D cube?

Hi all,
I'm very new in the use of Java 3D and I would like to know how to set, in a 3D cube, for each side a different image.
Currently I've the code to set an image as texture of the cube, but it applies the same image to all the sides. However, I would like to use different images for each side.
This is my code: http://pastebin.com/sexBx57K
Any clue?
Thanks!

I think I worked it out.
I just have to set the JAXP parser
Q. How do I use a different JAXP compatible implementation?
The JAXP 1.1 API allows applications to plug in different JAXP compatible implementations of parsers or XSLT processors. For example, when an application wants to create a new JAXP DocumentBuilderFactory instance, it calls the staic method DocumentBuilderFactory.newInstance(). This causes a search for the name of a concrete subclass of DocumentBuilderFactory using the following order:
1. The value of a system property like javax.xml.parsers.DocumentBuilderFactory if it exists and is accessible.
2. The contents of the file $JAVA_HOME/jre/lib/jaxp.properties if it exists.
3. The Jar Service Provider discovery mechanism specified in the Jar File Specification. A jar file can have a resource (i.e. an embedded file) such as META-INF/services/javax.xml.parsers.DocumentBuilderFactory containing the name of the concrete class to instantiate.
4. The fallback platform default implementation.

How to set upper and lower limit for service notification in SPRO

Hello everyone,
Good morning....!!
I am new to SAP PM and to SCN as well.
I have a question on Service notification user status.
I have notification profile configured in SAP as below:
Status no      Status          Short text              Lower limit          Upper limit
5                  REGD          Registered                1                          70
10                PCKS            Pack sent                  1                          70
20                APRC            Application received 1                        70
etc..
I want the statusesto be set as navigation should only allow to go back one by one...like from APRC -->PCKS not to REGD.From PCKS -->REGD etc..not vice versa.
Can enayone explain me to how to set lower and upper limits for these according ot the above requirement.
for more details please check my attachment.
Thanks in advance..!!
Regards,
Sudha.

Once you change the status to previous status, just save the order. Then again open the order & try to change the user status.
Just I made replica of your profile. I could able to change (even without saving the order).

Beginners question: how to set a number of repeats for an operation

Similar Messages

Maybe you are looking for