Behaviour of SAP-exit feeded variables in variants of Broadcaster

Hi folks,
We would like to use the SAP exit feeded variable 0CMONTH (reference charateristic: 0CALMONTH) for broadcasting functionalities, based on a query.
0CMONTH itself has SAP-default setting under details' property "Variable is Ready for Input", flag active set.
If we select such query for broadcasting functions, creating some variants with characteristic variable 0CMONTH, how would these variants behave after the current month will change, changing to the next month?
Example for 0CMONTH:
Now: July 2008, 07.2008
Next month: August 2008, 08.2008
Would the initial created and saved broadcaster variants also change the month-setting as it would do in the BEx area?
Or must the user change these variants each month again?
Any reply is much appreciated.
Regards
Chäsitzer

Thanks a lot Uday,
now my enquiry changes a bit:
How does the Broadcaster and its designed variants behave in the case of non SAP-exit variables with property setting "Variable is Ready for Input", flag active set?
Thanks for any replies.
Chäsitzer
Edited by: Chäsitzer on Jul 23, 2008 9:37 AM

Similar Messages

  • Processing type as SAP Exit with Variable 0F_ADAY

    Hi Experts,
    We are using the formula variable in our report as caluculated key figure.  I have edited the CKF and drill down the formula node to check the processing type of it and found as SAP Exit and the variable name is 0F_ADAY.  How can i navigate to get in to the SAP Exit code.  Any help will be appreciated.
    Thanks and Regards,
    Venkat

    Hi Venkat,
       Go to the function module "RSVAREXIT" (T.Code - SE37) and check for you variable (0F_DAY)there. From there u can check the code corresponding to that variable;
    Regards
    Prasad;

  • To use a Sap Exit variable in a diferent infoobject of the same type

    Hi gurus,
      I have the Sap Exit standard variable 0P_KEYDT in the infoobject Posting Date (0PSTG_DATE), and i need use this variable with the Document Date (0DOC_DATE), but i don´t have it in the infoobject. Both infoobjects are referenced by 0DATE.
    Are there some way to copy the variable from one infoobject to other, or i need make my own exit?
    Thanks in advance and regards.

    If both of them are the same type means they are referring to 0DATE, then you should be able to access the standard variable defined. What you need to do is, delete the variable  and recreate it, but when you recreate the variable don't refer to a characteristic 0PSTG_DATE but refer to date object so that it will be available to all date types.
    I will tell you the side effect of doing this, changing the standard definition is always risky because if someone install the object again, then the change you made will be overwritten and hard to know what happened.
    thanks.
    Wond

  • Current Year Formula Variable with SAP-Exit

    Hi Experts ,
    Is there any SAP Exit Formula Variable avaliable that we can use in BEX which gives us the Current Calander Year?
    I am able to find the current fiscal period ie "0F_CUFPE" which provides the current posting period/month.
    On similar basis, I need a FV which provides me the Current Calender Year.
    Please note that I do not need Characteristic Variables for Fiscal Year .
    Regards
    Dipali

    Hi,
    If you're refering to the InfoObject 0CALYEAR, there is an exit variable available called: 0CYEAR - Current Calendar year
    Which will filter on the current year.
    br
    Mikael

  • ABAP coding for variable SAP exit

    Hi,
    I'm looking for a way to see the coding of a SAP-exit query variable: 0FYTLFP.
    So this is NO custom-exit (via CMOD).
    I've tried the FM: RSVAREXIT<varname> but it doesn't exist.
    Via RSRT i couldn't find the piece of coding either.
    I'm not looking for the functionality but the piece of coding that is used for this.
    How can I find it??
    Cheers.

    Ok, this code works as per my note above. If the period of the system date is the first of the fiscal year, it will return to the previous fiscal year to get a range for YTD.
    Basically, this acts as if you're running the query in the previous period for current YTD.
    WHEN 'ZFYTLFP'.
            CLEAR: ZE_T_RANGE, E_T_RANGE, ZI_T_VAR_RANGE, W_YEAR, W_PERIOD, L_FPER.
            DATA: l_poper    LIKE t009b-poper.
            DATA: l_fiscyear LIKE t009b-bdatj.
            DATA: l_curdate  LIKE sy-datum.
            l_curdate = SY-DATUM.
            CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
              EXPORTING
                  i_date         = l_curdate
                  i_periv        = i_periv
              IMPORTING
                  e_buper        = l_poper
                  e_gjahr        = l_fiscyear
              EXCEPTIONS
                  input_false    = 1
                  t009_notfound  = 2
                  t009b_notfound = 3
                  OTHERS         = 4.
           W_YEAR = l_fiscyear(4).
            W_PERIOD = l_poper(3).
            IF W_PERIOD = '001'.
              W_YEAR = W_YEAR - 1.
              W_PERIOD = '012'.
            ELSE.
              W_PERIOD = W_PERIOD - 1.
            ENDIF.
            ZE_T_RANGE-LOW(4)   = W_YEAR."  year
            ZE_T_RANGE-LOW+4(3) = '001'.
            ZE_T_RANGE-HIGH(4) = W_YEAR. "  year
            ZE_T_RANGE-HIGH+4(3) = W_PERIOD.
            ZE_T_RANGE-SIGN = 'I'.
            ZE_T_RANGE-OPT = 'EQ'.
            APPEND ZE_T_RANGE TO E_T_RANGE.

  • SAP EXIT Variable 0FYEAR is not working for Fiscal Year(OFISCYEAR)

    Dear SDN,
    I have created Simple Query.
    ROWS
    Company code(0COMP_CODE)
    Fiscal Year(0FISCYEAR)
    Columns
    Total Debit postings(0DEBIT)
    Total Credit posting(0CREDIT)
    Filters
    Companycode(Variable Selection option)
    Fiscal year(Varialbe SAPEXIT 0FYEAR)
    Fiscal Year Variant(K4)
    After executing the query in the variable screen only company code is displayed.
    SAP EXIT FISCAL YEAR VARIALBE(0FYEAR) IS NOT WORKING.....
    Is there any setting or activation is required to use SAP EXITS?
    Waiting for Solution......
    Thanks & Regards,
    Praveen.K

    Hi
    In this case you will have to use a Customer Exit (which is Ready for Input) Variable which gets Current Fiscal Year as a Default Value.
    In order to do that - you will need to create a Customer Exit Variable which is Ready for Input. The Variable will have to be assigned with Current Fiscal Year under I_STEP 1 (this refers to the coding of the Customer Exit in T-code: CMOD)
    If you need any help with the coding - don't hesitate to ask.
    Yaniv

  • Current Workday SAP EXIT variable not aligned with correct work days

    Hello,
    I am trying to use the Current Workday variable within a report so that the data will only be refreshed when the calendar day is Monday - Friday. Users look at this report every day, but when they get the report on Monday we would like for the date to be restricted to the previous Friday, and then switch back to Monday's date when they view the report on Tuesday. In order to do this we have placed the Current Workday variable from the Calendar Date characteristic with an offset of negative 1, but it is showing Sunday's date when they look at the report on Monday.
    My questions are:
    -Does this variable use the factory calendar that can define the work days?
    -If so, which Factory calendar does it use? I have gone to the Tcode SCAL but I can see there are many different factory calendars and I have no idea which calendar this variable pertains to. I have also transferred the global settings for the factory calendar from the source system, and I see no change within the variable.
    -How can I see the program name behind this SAP Exit variable? My thinking is that I could at least look at the code to see if perhaps I can find out the factory calendar ID the variable refers to from there.
    Any help on this would be greatly appreciated! Until this is fixed I have to manually adjust this report every Monday and Tuesday morning!! Not ideal.

    Hi Kelly,
    I am not sure whether this can be done by an SAP Exit variable.
    But you may try this using a Customer exit variable by using the Function module DATE_COMPUTE_DAY.
    The function module "DATE_COMPUTE_DAY" will return the day by 1 to 7 when you input date.
    Monday : System will return value = 1
    Tuesday : System will return value = 2
    Wednesday : System will return value = 3
    Thursday : System will return value = 4
    Friday : System will return value = 5
    Saturday : System will return value = 6
    Sunday : System will return value = 7
    So input sy-datum to this FM and find the number of day. If it is Monday, the number will be 1.
    If output is 1, then offset date by -3 to that of Friday, else offset by -1 to previous day.
    Hope this helps,
    Regards,
    Hari

  • How to find out the customer exit and sap exit variables created provider?

    Hi all,
    How to identify what are all the customer exit and sap exit variables are been created for an info provider. is there any tables which allow us to find out.
    thanxs
    haritha

    Hello haritha,
           SAP Exit and Customer Exit variables are created for  Characteristics and not for individual InfoProviders.
    So whenever the characteristic is used in the InfoProvider, by selection the appropriate variable the exit can be called.
    So the same Exit can be in one or more InfoProviders.
    Hope it helps.
    Thanks,
    Chandran

  • Standard SAP EXIT on Text Variables

    Hello Experts,
    I am working on Customer Aging Analysis. first of all I want to use standard SAP Queries and want to have a look on standard SAP EXIT created on variables.i have opened the query no 0FIAR_C03_Q0005. here it shows me one text variable 0P_KEYD2. now i want to see that SAP EXIT created on the variable of Posting Date.
    I went to SE37. i entered the Function Module EXIT_SAPLRRS0_001. but i didn't get standard SAP EXIT given by SAP.
    Can anyone tell me from where i can activate or Get the standard SAP EXIT ?
    Regards,
    Komik Shah

    Hi Mansi,
    Thanks for your reply.
    now if i want to add that SAP EXIT in EXIT_SAPLRRS0_001, then can i add it ? or do i have to directly use RSVAREXIT_0P_KEYD2 ??
    All standard SAP EXIT will work the same way you  mentioned ?? means goto SE37 --> type Variable Name --> get that exit.
    Regards,
    Komik Shah

  • Variable required for 0DOC_DATE, same as the SAP exit variable 0P_KEYDT

    Hi Gurus,
    I am currently trying to create a query based upon the InfoProvider -  FIAP: Line Item (0FIAP_C03).
    For the Characteristic Net Due Date (0NETDUEDATE) there is a SAP exit variable called Key Due Date (0P_KEYDT).
    I need to replicate this variable for 0DOC_DATE, which is what I need to use in this query.
    I do not have any knowledge of ABAP therefore could you please advise;
    1) Whether this variable can be replicated for 0DOC_DATE so that it defaults to system date - 1 day
    2) What steps I need to take to create this variable
    3) What is the exact ABAP code that I will need to do this.
    If there is a variable that already exists for 0DOC_DATE that acts in the same way as 0P_KEYDT then please let me know.
    Thanks
    Nate

    Hello,
    1&3) goto CMOD - create e.g. ZBWVARS. Add RSR00001enhancement. Modify ZXRSRU01 include.
    You need developer key to do that.
    CASE i_vnam.
    WHEN 'ZDOC_DATE,'.
        IF i_step EQ '2'.
          CLEAR l_s_range.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          l_s_range-low = sy-datum - 1.
          APPEND l_s_range TO e_t_range.
        ENDIF.
    ENDCASE.
    2) In Query Designer create customer-exit variable ZDOC_DATE.
    BR
    Ondrej

  • Webi  Bypassing BEx Authorization Variable with SAP Exit

    BEx query has Hierarchy Node Variable with Authorization as processing type. Its set as User Input ready
    When the Webi report is refreshed, the LoVs appear as per the Authorization. However, if user doesn't select any value (pushes from right to left in variable screen) he gets NOT_AUTHORIZED error. Which is not intended, it should check the authorization in the background via SAP exit and populate the result. This is how it runs inBEx query.
    However, in Webi it's giving NOT_AUTHORIZED error? This is how the product is designed to work or is it a bug.
    I see several forum threads and SAP KBAs/notes but they are not answering my question. Could anyone please help.
    I am ready to provide more details on this error.
    Thanks,
    Tilak

    Hi,
    this is how authorization variable would work in any of the clients and not just Web Intelligence.
    You created an authorization variable which is configured as "read for input", so the user is getting prompted.
    So In Web Intelligence the LoV shows up.
    if the user does not select a value, then you are not sending a value, so you basically asking for all data and you are not allowed to see all data and therefore you are getting the message "no authorization".
    if you are making authorization variables as ready for input then the user needs to select the proper values - regardless of the BI tool.
    if you want the authorization to be check in the background then the authorization variable should be configured to not have ready for input.
    regards
    Ingo Hilgefort

  • Using SAP Exit Variable twice on the same report

    Hello all,
    I need to use the same variable -Current Calendar Day (SAP Exit)- to filter against 2 characteristics on the same report.
    Unfortunately it's not possible, here the error:
    " Variable 0DAT is used in both (structure) element 11T4741S4XTWZUAJ9IQ6DUDE1, and element AZLK9YCS4XGJ940MRPMLXMDS9 for various characteristics (ZCBBIDATE, ZCBPHTDT). This is not permitted as the characteristic is required for the F4 value help structure."
    May you please suggest me a way to do it ? Thanks in advance.

    Hi
    As the 0DAT varaible check the other standard varaible which provides the same function in business content.
    Or create a varaible with Customer exit and use it.
    In CMOD write the code in like this
    WHEN 'ZDAT'
    L_ZDAT = Sy-datum.
    L_S_RANGE-low = L_ZDAT.
    and follow the other codes as you define for other varaibles.
    REgards
    M.A

  • U201CDisplay not allowedu201D for SAP Exit variables

    Hi All
    I collected some SAP Exit variables under a transport request and moved them to the BI DEV system from sand box systemu2026u2026u2026 when we are trying to use these objects in BIDEV in the query designer the variables are displaying as u201CDISPLAY NOT ALLOWEDu201D for all queries where ever these variables are used and we are not able to use them for drag and drop in the query designer
    I searched forum and find one similar thread but no answer
    Please help on this
    Thanks in advance

    Same here. Do you know how you resolved this issue?

  • BEx SAP-Exit Variables

    Where do I find documentation on BEx SAP-Exit Variables. What the Exit does and so on?

    Try this link.
    http://help.sap.com/saphelp_nw70/helpdata/en/36/df22419e2ab167e10000000a155106/frameset.htm
    The variables are documented as per BI Content.
    -Saket

  • SAP exit  -- user entry variable

    Hello,
    In my report i need two columns: one is for displaying the value of the current period and the other one is for displaying the cumulated value up to the current period. The info object is 0FISCPER.
    1. The current period should be entered via user entry and based on this, an exit variable should pick up the year's cumulated value. Which variables could I use to fulfill these requirements?
    2. Furthermore i have looked in SE37 to find the code of SAP Exit variable "0FYTCFP". However, the FM for the variable doesn't seem to exist. Why? The variable however exists in table RSZGLOBV. How do I find the code?
    Thanks in advance,
    F C

    If you are gonna use fiscper as a variable parameter, your requirement would need a customer exit. 
    If i get it right, the first would column should be derived from the user entry which wont be possible with the suggested SAP exit as that would bring the current fiscalyear/period (based on sys date) not giving the user the option to enter the fiscalyear/period. And the second column should be a YTD for that particular year the user has entered as a input parameter. the suggested SAP exit will again be calculating based on ur system date not on the user input.
    the only way you can overcome this is if you have the flexibility to use fiscalyear and posting period seperately. if you can do that, you can avoid the customer exit. the procedure would be -
    You can create ur own variable of type user entry on fiscalyear and posting period.
    the first column would have ur KF further restricted by fiscalyear and posting period restricted by the variables you created ... so in the 1st column you would get the value for that period.
    in the second column, the selections would be same (KF further restricted by fiscalyear and posting period ) but while restrict posting period make it a value range - and in the range pick period 1 - the variable u created, that would give you the YTD from period 1 to the user entered period.

Maybe you are looking for