Bell Canada issues update to 4G LTE

Well after much customer service time with both Blackberry and Bell an update has finally been released!
2.1.0.1526 has officially been approved.
Go to software updates and check!

Yes, you should be able to get the Xoom updates over Wi-Fi. All of the Xoom OTA updates I have received to date, both before and after I had the LTE upgrade performed, have come over Wi-Fi. As for ICS, I haven't read anything to indicate that either the LTE upgrade or active VZW data service will be a requirement to get it.
It was tough not having my Xoom in hand while it made its roundtrip, but I'm glad I did it. Like you, I feel it's of value to have LTE capability in case I might want it some day.
Apparently some users sent their Xooms in without doing a wipe or encrypting their data, and their units came back intact. Can't say whether or not any of their contents ended up on the net though. With or without a wipe, I suggest making a backup of anything important first. I took the opportunity to "clean house" of all the apps I installed but rarely used, so the wipe was not as painful. The worst of it was losing the progress I made in all of the games.
BTW, I think the window to get the LTE upgrade is closing sometime soon, so if you're going to do it, you should do it soon.

Similar Messages

  • 3G Issues on Bell Canada Network

    Hi,
    I have been without 3g service on my 32GB 3G iPad 2 for the last three days. My 3G data did work beforehand. My Wi-fi connection works fine.
    I get no 3G connection using any app but when using Safari, I get an error message of:
    Cannont Open Page
    Safari cannot open the page because the network connection was lost.
    My iPad shows full bars and says Bell 3G in the corner.
    I spent a lot of time on the phone with tech support running me through the standard troubleshooting procedures, turning settings on and off, resets, I even did a full restore when I got home.
    Thinking it may be a hardware issue, I went to the Apple Store and they gave me a whole new iPad, but after reinserting my SIM, I got the same issue.
    I went over to the Bell kiosk in the mall and was there for about an hour doing more troubleshooting including giving me a new SIM card.
    I'm thinking the probability of having two faulty iPads is pretty low and am assuming it is totally on Bell's shoulders. Talking to tech support today, they admitted they've had a few similar calls.
    Has anyone else experienced the same issues?
    I am kinda POd as I had a skin on the back of my original iPad that wasn't coming off in any nice fashion so I had to leave it on the iPad going back to the warehouse esentially putting me out money.
    I'm supposedly a "high priority" with Bell and am expecting a callback later today or tomorrow.
    I'll be switching to Rogers or Telus if this isn't wrapped up soon, so annoying.

    @spitfire411
    Here's the confusing part.  You are claiming that you are on a shared data plan and yet your wife's corporate only has a 500Mb data plan.  As I recall from a Bell Canada rep, any shared data plan with a smartphone (iPhone) requires a minimum of a 1Gb data plan.  And in order to achieve something similar to what you thought you are getting, you need a small business account with about 1000 voice mins plus extra $30 gets you a 6Gb data plan and plus $10 additional share plan to share the data plan with your tablet (that was when the 1st iPad came out -- they lowered the restrictions somewhat since then).  I had to upgrade to this plan in order to get sharing and tethering to work properly.  The monthly flex plan you mentioned is I believe an independent plan by itself and should not be tied with your wife's corporate plan.  Perhaps they may have made a mistake and tagged your tablet's plan as a shared data plan with a smartphone, but since it's only a 500Mb data plan, the system probably refused to allow sharing because of its failure to meet the minimum 1Gb data plan for smartphones that's required.  Unless Bell had changed this requirement recently?!?   
    Bell's Corporate EPP plan is not the same as a small or business plan because some people can get it through say BCAA (then) or Costco or an employee working for a company, so sometimes Bell people confused what's possible in a business plan that is not available on a corporate plan and I suspect this may explain why you lost access after the 1st billing cycle.
    To give you an idea, minimal browsing and email and social networking can consume about 1Gb/month with an iPad.  Any minimal Youtube streaming and Shoutcast or Tunein Radio usage on top of what you are doing, you will need a minimum of about 3Gb/month.  Yes, a tablet can suck bandwidth much more than an iPhone which probably explains why Bell wants you to have a minimum 1Gb data plan so if you plan to tether an iPad to an iPhone, you are not going to get any surprises with a 1Gb data plan as opposed to a 500Mb plan.  So unless you have a large data plan (5Gb or higher), you should keep your smartphone and tablet plans separate. 
    Good luck in your progress with Bell and let us know what you found. 

  • Firmware Update for my blackberry 8830 world edition with Bell Canada

    Hi does anyone know if there is firmware update for the Blackberry 8830 world edition with the carrier being Bell Canada?  I am running version 4.2 and I know there is 4.5 but I am not sure if this applies the my phone with Bell Canada. When I boot up my desktop manager and checks for updates and says that there is no update.  I don't want to update if it is not necessary and not be able to run my blackberry.  If I am able to update where would I go to get the 4.5 update?

    You have to repair Desk Manager or unintall and reintall DM, but this time uncheck "Auto update" and anything that refer to "update" the reason why I mention that is because everythime you run DM, it goes online and check for newer version and put this file "vendor.xml" in the Blackberry Common Folder, and with that file in place, it will block the program from installing the newer version from a difference cell company..
    From what I see 4.2 is the only version that is up to date for a 8830...but if you have a 8820, you can update to 4.5. 

  • AW: [Acrobat Installation & Update Issues] AW: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

    hello
    I say again that I have acquired the Acrobat 8.0 version honestly. I ordered this version even if a handler is Germany. This handler was registered on the website at Adobe as a handler. If you do not believe me, I'm looking for stuff from my archive. But this time I would like to have then paid by you. Again, it is known that the version 8 Without the update 8.3, constantly has errors. I used to simply confirmed the update button. Today there is no longer this site. You are obliged to provide me with the update. Or give me a free replacement to the next higher version. Please give me a link to a zip file that contains a setup file.
    Best Regards
    Werner
    Hallo
    Ich sage nochmals, dass ich die Acrobat 8.0 Version ehrlich erworben habe. Ich habe diese Version auch bei einem Handler ist Deutschland bestellt. Dieser Handler war auch auf der Webseite bei Adobe als Handler registriert. Wenn Sie mir nicht glauben, werde ich die Sachen aus meinem Archiv suchen. Diese Zeit möchte ich aber dann von Ihnen bezahlt haben. Nochmals, es ist bekannt, das die Version 8. Ohne das Update 8.3, ständig Fehler hat. Ich habe früher einfach das Update Button bestätigt. Heute gibt es diese Seite nicht mehr. Sie sind dazu verpflichtet, mir das Update zu liefern. Oder liefern Sie mir kostenlosen Ersatz auf die nächste Höhere Version. Bitte, Sie mir einen Link mit einer Zip-Datei, die eine Setup Datei beinhaltet.
    Best Regards
    Werner
    Mobil:   +41 (0) 79 559 83 21
    Skype:<skype:werner6331?call> Werner Göbel<skype:werner6331?call> (werner6331)
    Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
    This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
    The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
    Von: Rave
    Gesendet: Donnerstag, 28. August 2014 22:50
    An: Werner Göbel
    Betreff:  AW:  Update von Acrobat 8.0 auf 8.3
    AW:  Update von Acrobat 8.0 auf 8.3
    created by Rave<https://forums.adobe.com/people/Rave> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6682731#6682731>
    < This thread has been answered a duplicate of Update von Acrobat 8.0 auf 8.3<https://forums.adobe.com/thread/1558776> >
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6682731#6682731
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

    Warum Sie antworten nicht auf meine Frage??
    Wie muss ich Instaliren??
    Beste Grüße
    Werner Göbel
    Mobil:     +41 (0) 79 559 83 21
    Skype:<skype:werner6331?call>  Werner Göbel<skype:werner6331?call> (werner6331)
    IGH Holding AG
    Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
    This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
    The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
    Von: Bill@VT
    Gesendet: Sonntag, 31. August 2014 22:09
    An: Werner Göbel
    Betreff:  AW:  AW:  Update von Acrobat 8.0 auf 8.3
    AW:  AW:  Update von Acrobat 8.0 auf 8.3
    created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6689459#6689459>

  • No Paid Apps on pre 2 Bell Canada

    Hi,
    I received a Palm pre 2 from HP unlocked.  When I activated it, on Bell Canada, I noticed I have no access to paid apps...
    I also only have limited free apps.  I can see angry birds on the Featured apps, but If i click on it it says "no Package found"
    I also tried using Synergy, but I can't see that package either, this is starting to get annoying.  I chatted with a palm rep for an hour last week but nothing was fixed. An engineer is supposed to call me back, (That was last week)... Still nothing.
    In my palm Profile and On my phone I noticed the carrier was showing ROW, not sure if this is an issue.  I have tried everything on this erase, full erase, nothing seems to work.  I even did a full Erase and tried activating it on Rogers... Still nothing.
    What sucks even more is most of my co-workers got theirs (They were on rogers, so they didn't get the unlocked one) and they are all working fine. BTW did I mention I actually work for HP and this is my corporate phone ?  Kinda Ironic isn't it...
    Anyway any feedback will be greatly appreciated
    Regards
    Post relates to: Pre 2 p102una (Unlocked NA)

    Hi,
    Not sure if this is true, but my understanding is that the first activation after the Palm Pre comes out of the package has to be with the carrier that the machine was originally on in order to get the App Catalog to work with paid apps.
    I have a personal experience with a locked to Rogers Palm Pre 2.  I activated it on Rogers, then unlocked it and activated it on Bell Mobility and I have full access to the app store.
    Hope this helps.  Unfortunately, my understanding is that it is the first activation that matters, any subsequent activation after a WebOS doctor for some reason does not change anything.
    Regards,
    Howard

  • WG: [Acrobat Installation & Update Issues] WG: [Acrobat Installation & Update Issues] Update von Acrobat 8.0 auf 8.3

    Mein Guter Freund.
    Ich brauche nur eine Datei mit einem Vollen Update.
    Ich möchte das Update mit einer EXE starten können..
    Beste Grüße
    Werner Göbel
    Mobil:     +41 (0) 79 559 83 21
    Skype:<skype:werner6331?call>  Werner Göbel<skype:werner6331?call> (werner6331)
    Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
    This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
    The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
    Von: Bill@VT
    Gesendet: Donnerstag, 28. August 2014 17:15
    An: Werner Göbel
    Betreff:  WG:  Update von Acrobat 8.0 auf 8.3
    WG:  Update von Acrobat 8.0 auf 8.3
    created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6681580#6681580>
    I was not trying to imply that you improperly purchased the product, but that the source may have been a rip off and that could be the problem. From what I can see, it appears that you were able to install Acrobat, but can not do the updates. In that case, try the updates from the ftp site. I will have to come back with the address that I do not have on this machine. The html updates are no longer available for some reason, but the ftp site contains all the updates. You do have to install the updates in order in general, though you only have to reboot after the last update. I will change computers and find the ftp link to provide you.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6681580#6681580
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Acrobat Installation & Update Issues by email<mailto:discussions-community-acrobat-installation_and_update_installation@adobe-v7.hosted.jivesoft ware.com> or at Adobe Community<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 14>
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

    Warum Sie antworten nicht auf meine Frage??
    Wie muss ich Instaliren??
    Beste Grüße
    Werner Göbel
    Mobil:     +41 (0) 79 559 83 21
    Skype:<skype:werner6331?call>  Werner Göbel<skype:werner6331?call> (werner6331)
    IGH Holding AG
    Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Der Inhalt dieser E-Mail ist ausschließlich für den bezeichneten Adressaten bestimmt. Bitte beachten Sie in diesem Fall, dass jede Form der Kenntnisnahme, Veröffentlichung, Vervielfältigung oder Weitergabe des Inhalts dieser E-Mail UNZULÄSSIG ist. Wenn Sie nicht der richtige Adressat bzw. sein Vertreter sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Vielen Dank. Der Versender übernimmt keine Haftung für die Richtigkeit oder Vollständigkeit der Meldung. Eventuell entstandene Schäden die aus den Inhalten dieser Meldung resultieren werden vom Versender nicht übernommen.
    This e-mail may contain confidential and/or privileged information. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient (or have received this e-mail in error), any form of disclosure, reproduction, distribution or any action taken or refrained from in reliance on it, is strictly PROHIBITED and may be unlawful. If you have received this transmission in error, please inform the sender immediately by e-mail at the above address and destroy this e-mail. Thank you.
    The sender does not accept liability for any errors or omissions in the contents of this message, which may arise as a result of e-mail transmission.
    Von: Bill@VT
    Gesendet: Sonntag, 31. August 2014 22:09
    An: Werner Göbel
    Betreff:  AW:  AW:  Update von Acrobat 8.0 auf 8.3
    AW:  AW:  Update von Acrobat 8.0 auf 8.3
    created by Bill@VT<https://forums.adobe.com/people/Bill%40VT> in Acrobat Installation & Update Issues - View the full discussion<https://forums.adobe.com/message/6689459#6689459>

  • Bell Canada Palm Pre - Second Class Citizen

    I've had my pre for a while now and really enjoy using it. I love the touch screen, I enjoy the multi-tasking abilities and am generally a fan.
    Unfortunately I've been made to feel like a second class citizen time and time again from Bell Canada.
    I cannot get updates at the same time as my Sprint Brothers and Sisters.
    I cannot get an answer as to when this will occur, or why the delay exists on Bell's end.
    I cannot purchase applications that I want to use and as such cannot reward publishers and programmers for their hard work, and incent them to continue to create applications for an OS that i think is quite amazing.
    In short I feel that Bell mobility has let me down, and in effect let Palm down.
    Once my contract is up, i will not renew with Bell.
    Hopefully some one else will carry Palm products in Canada and will fully support them.
    Post relates to: Pre p100eww (Bell)

    Well i can agree with this post up to a certain point. Most of the previous Updates were released at the same time as the ones in the states....however this update has improvements for Sprint.  So bell has to take the update and switch over there programming to benefit from the features that the update will bring for us.  But i do agree that the lack of information given to bell employees about up coming updates is pathetic (Should call support not the bell store).  However this will not stop me from using bell. The update is coming. and we will have to be patient about it.  I am also against the fact that canadian users can't purchase Apps....and that most of the good apps are submitted for US only....what is the point of even putting it up?  U wish palm would hurry up and give us the things they have told us about and stop putting out useless updates that really don;t fix anything.  Yes the space limitations are gone...but even after 1.3.5.  its still slow and laggy and this is Unacceptable.  I should just buy a blackberry!

  • When the update to support LTE will be released for Claro in the Dominican Republic?

    Claro in the Dominican Republic has launched LTE (since yesterday) and proceeded to sell or give the 4G LTE Sim cards so the users can have the service. I went over, got my new sim card and inserted in my Iphone 5 (A1428), and said to my self "I'm good to go". Turns out I wasn't. Unfortunately, I could not get it working. I even moved around the city to see where I could get 4G coverage.
    When I called customer service to argue about the lack of coverage and to discuss that this may be a scam from the company. The customer service person told me to go to settings>cellular> to toggle Enable LTE, and I replied that I did not have that option. Then the customer service clerk argued that I did not have an updated Device. My iphone 5 IOS version is 7.1.2.
    After doing some research while on the phone with the customer service representative (it was a 45 min long call) I had to agree with him that maybe apple has to "released" or "enabled"  the service for this specific carrier, just like it happened in Colombia when the LTE was introduced.
    Currently there are 3 companies (Tricom, Orange, and now Claro) offering 4G LTE in the Dominican Republic and None are listed in the 4G LTE availability per device per country according to apple.  https://www.apple.com/iphone/LTE/.
    So my question is: When the update to support LTE will be released for Claro in the Dominican Republic? (it would be great if an apple employee could get involve in this thread, or escalated it to who can do something about it.)

    FelipeV
    Let me tell you something: no one is saying go and do something illegal to enable this feature on your phone and no one is reporting any confidential information; the purpose of this thread is to clarify some points:
    The LTE Network for Claro DO is real, is functional and is not a Scam
    The LTE Network works with compatible devices except iPhones, not by decision of the carrier but the manufacturer.
    About that the date that when will be available is not a confirmed date, it's an estimate based on previous releases in other countries and information that I received from inside Claro, not a speculation (find the definition). Of course Claro hasn't confirmed because, like other says, is apple decisions and not their (you don't have to be a genius to figure that out).
    Forums are to express yourself freely about a specific topic, and to give your point of view whether you agree or disagree with something, but when you do be polite and do it with respect and not with arrogance as you just did hinting others are stupid and do not know what they are doing. Take an advice from some one with a little bit of experience, you don't know when you will need some help.
    Have a good night.

  • Issues updating or restoring iPhone

    Issues updating or restoring my  iPhone 4s. what I should do it just dont do anything else. no even charging ...

    You haven't provided enough information to even start to help you. WHAT issues are you having? What have you done (detailed steps)? What are the results? What are the error messages? What are the error numbers? Have you tried different chargers and different cables?

  • Issues updating or restoring iPod touch

    Issues updating or restoring iPod touch

    If you have problems restoring your device and there are some error numbers given, check this article:
    Update and restore alert messages on iPhone and iPod touch

  • Issues updating/setting multi value lookup columns via powershell

    Hi All,
         I have an issue updating multi values in a lookup field via powershell
    I can update a single value  lookup field as below but can't get to update if its multi value.
    As stated below when I hardcode it. It works.
    No idea what 'm missing. Any help will be appreciated.
    #Hardcoded works below as you can see i'm setting 3 values
    $array = @($realval.Split(';'))
    for ($i = 0; $i -lt $array.Count - 1; $i += 2)
    $word = $array[$i].Trim('#')
    $number = $array[$i+1].Trim('#')
    "$number $word"
    $lookupvalue1 = GetLookUpValues -val $number
    [Microsoft.SharePoint.SPFieldLookupValueCollection] $itemValues = New-Object Microsoft.SharePoint.SPFieldLookupValueCollection
    [Microsoft.SharePoint.SPFieldLookupValue] $lookupvalue = New-Object Microsoft.SharePoint.SPFieldLookupValue
    [Microsoft.SharePoint.SPFieldLookupValue] $lookupvalue2 = New-Object Microsoft.SharePoint.SPFieldLookupValue
    [Microsoft.SharePoint.SPFieldLookupValue] $lookupvalue3 = New-Object Microsoft.SharePoint.SPFieldLookupValue
    $lookupvalue.LookupId = 1
    $lookupvalue2.LookupId = 2
    $lookupvalue3.LookupId = 6
    $itemValues.Add($lookupvalue)
    $itemValues.Add($lookupvalue2)
    $itemValues.Add($lookupvalue3)
    #$itemValues.Add($lookupvalue)
    $CMRSItems["Event Type"] = $itemValues;
    Write-Host "items:" $itemValues
    $CMRSItems.Update()
    # This works when its updating only one value but when it needs to update multivalue it only updates the last one
    #so for example with the lookupvalue above only 6 gets updated below
    $array = @($realval.Split(';'))
    for ($i = 0; $i -lt $array.Count - 1; $i += 2)
    $word = $array[$i].Trim('#')
    $number = $array[$i+1].Trim('#')
    #$number
    "$number $word"
    #send param to GetLoolValues func to return records as SPFieldLookupValue
    $lookupvalue1 = GetLookUpValues -val $number
    #I can view the lookupvalue returned successfully
    #Write-Host $lookupvalue1
    [Microsoft.SharePoint.SPFieldLookupValueCollection] $itemValues = New-Object Microsoft.SharePoint.SPFieldLookupValueCollection
    #This LookupId returns 3 values like on the hardcoded one above like so :1,2,6
    $lookupvalue.LookupId = $number
    $itemValues.Add($lookupvalue)
    $CMRSItems["Event Type"] = $itemValues;
    #I can view the items returned successfully
    Write-Host "items:" $itemValues
    $CMRSItems.Update()

    The problem I can see with your code is that the below line of code, you are instantiating inside the for loop. This should have been outside the for loop as by keeping it inside the loop you are overriding the value.
    [Microsoft.SharePoint.SPFieldLookupValueCollection] $itemValues = New-Object Microsoft.SharePoint.SPFieldLookupValueCollection
    Please have a look at the below solution and modify your code as per your requirement. What I am trying to achieve in the below code is that I have a listA in which one of the field is being used as a multi-lookup in my listB.
    $lookupCollection = $something.split(";")
    $LookupMasterList=$web.Lists["ListA"]
    [Microsoft.SharePoint.SPFieldLookupValueCollection] $lookupValueCollection = New-Object Microsoft.SharePoint.SPFieldLookupValueCollection
    #Get the Lookup Item from Parent List
    foreach($item in $lookupCollection){
    IF([string]::IsNullOrEmpty($item.trim())) {
    continue;
    $LookupItem = $LookupMasterList.Items | Where-Object { $_.Item("FieldInternalName") -eq $item.trim()}
    if($LookupItem -ne $null)
    $myLookup = New-Object Microsoft.Sharepoint.SPFieldLookupValue($LookupItem.ID,$item.trim())
    $lookupValueCollection.Add($myLookup);
    #Set the Lookup field value
    if([string]::IsNullOrEmpty($lookupValueCollection)){
    continue;
    else{
    $newItem["Lookupfieldinternalname"] = $lookupValueCollection
    The above logic has no hard coding and it fetches the lookup information directly from the master list and generates a collection based on that. You can modify the above code as per your requirement.
    Geetanjali Arora | My blogs |

  • I am having issue updating Mountain Lion on my Macbook Pro.

    I really am having issues updateing. The updates are iPhoto, Macbook Pro firmware, and Thunderbolt update. When ever i download and install them and then restart they just appear again that i need to redownload them

    Exactly as John Galt stated there is no support for Mountain Lion, being pre-release software. I personally run Mountain Lion on a virtual machine through VMware Fusion 4.

  • 10.5.7 - Why do so many people have issues updating?

    I have never had a single issue updating. I have never had to repair disk permission or anything like that, and every single update always goes without a hitch. I don't get it, are we this paranoid?
    I understand you should back up just in case anything happens, but anything else is unnecessary, imo.

    Strange... I experienced the same problems.
    The update won't load because of a wrong signature or something. So, I went online to get the combo pack and the reboot got stuck on a blue screen loop for eight minutes... I killed the macbook with the power button and fire up after.
    I noticed it didn't appreciate my harsh shut since it got stuck two or three times with a gray screen and start back from the beginning each time.
    I've just checked, my printer's also gone. I wonder why. U_u
    Blue screens. Things missing. This reminds me of something... What went south at Cupetino ? >_<

  • I am having issues updating my Photoshop and Illustrator CC?

    I am having issues updating my Photoshop and Illustrator CC? It keeps going to a page where it is telling me to download a trial. I already made my payment in December.

    Sign in, activation, or connection errors | CS5.5 and later
    Mylenium

  • Having issues updating Bootcamp drivers from 11.1 to 11.7

    having issues updating Bootcamp drivers from 11.1 to 11.7
    No matter what driver I have tried thus far
    it does not install or update the drivers
    Battlefield 3 nags you about having 11.1 and needing to update.
    However this game proceeds to load using these drivers (11.1 )
    I recently bought NFS THE RUN.
    Unlike BF3 the game does not proceed therefore inorder to play this game i would need 11.7 or higher.
    can someone please provide the driver that actualy installs and works.
    My specs are MBP 15 inch
    1 gig GPU ( AMD Radeon 6750m)
    8 gigs on Ram
    2.2 CPU i7

    Take a look around my bookmarks
    you are updating AMD, not Boot Camp drivers.
    you need to uninstall first.
    probably need to update via Device Manager not via Install from AMD
    The 99% leaving out import 1% support to make Windows on Mac work 100% seamless

Maybe you are looking for