Benefits- Miscellanious plan
Hello All,
Pension Premiums Calculation -> Our pension plans are set up as Miscellaneous Plans. The system is not calculating the employer premium. And also the Wage type is showing up for Full-time employees but not for Part-time, I couldn't escalate why it is showing up Full-time & not for Part-time.
The schema was build for miscellanious plan in sub-schme UBE1 for table p0377 (process benefit 1st call fro paremaeter 1) and UBE2 for table P0377(process benefit 2nd call for Parameter 2). When I'm looking at payroll log for some reason it's processing Benfit 1st call and nor reading 2nd call (where in I believe that the first program grouping Fulltime & Part-time, so as the scheme is reading for parameter 1 it's displaying wage type for Full-time and as the system is not reading parameter 2 its's not displaying Part-time - not sure)
Please help me to resolve this issue, it is very urgent for me to resolve. please help.
Thanks in advance,
Rajini
As I mentioned to you before, the Health Plans (IT0167), Insurance Plans (IT0168) and Savings Plans (IT0169) are something that is set-up in SAP and that employees "subscribe" or "adhere" to, and for which a contribution is made either by the employee, the employer or a combination thereof.
What you seem to want to set-up is a "Compensation Program" for short term and long term disability, since you mention that the employer will pay Full Salary to an employee who is disabled but only for 14 days if the employee is an "outpatient" and only for 60 days if the employee is an "Inpatient".
Two "Paid Absence" categories could possibly provide for that need: Outpatient Paid Absence and Inpatient Paid Absence.
As for the Medical Expenses part of your requirement, you could possibly create a WT for Medical Expense Refund (to be entered on IT0015), or a WT for Medical Expense Per-Diem (to be entered on IT0014) if there is a flat amount per day to be paid by the employer.
SAP probably has a special Infotype for Short Term Disability, similar to the Maternity Leave (IT0080) that we use in Canada, but I can only suggest you to do a little search. Out of the 91000 results from a Google search on "SAP Short_term_disability", this one looks like what you seem to want: http://help.sap.com/saphelp_46c/helpdata/es/bb/8a3ac94813d3119b430060b0671acc/content.htm
Similar Messages
-
Hi
Can any one explain me how to setup benefits and plans, Reimbursement.
Thanks in advance
NakshathraYou can refer the Guide B15517-02 from Page 1-46 to 1-113 for the complete setup steps plan, plan type, program and Reimbursement
You can download the guide from the link
http://download.oracle.com/docs/cd/B25516_17/current/html/docset.html
Regards
Ramesh Kumar S -
No rollover of pre-tax contributions message on benefits savings plans
I have set up an Health Savings Account Savings benefit plan and assigned it to an enrollment adjustment reason. On the Selection for enrollment screen that lists Plan, Costs and Remarks. Under the remarks column for the savings plan the link says No pre-tax rollover. When the link is opened up the message says No rollover of pre-tax contributions. I have looked through the Define Savings Plan General Data, Define Employee Contribution Variants, Define Employee Contribution Rules, Define Employer Contribution Variants, Define Employer Contribution Rules and the other config steps and I cannot find anything that has to do with whether or not the contributions can be rolled over.
Any idea where this No rollover of pre-tax contributions message is coming fromDevelopment option is to implement the BAdI HRBEN00ESS0002 -Benefits ESS: Customer Enhancement for Filling Costs/Remarks. to hide or Change the text of the link "No pre-tax rollover". But When the link is clicked it calls FM HR_BEN_ESS_RFC_PLANINFORMATION. This may have to be enhanced to hide or change the message No rollover of pre-tax contributions
-
Benefits Health Plans Deductions are not working
Hi All,
I configured health plans successfully and i am able to see all of my health plas from Open Enrollment and when i was trying to enroll into plans, the plans are showing wrong deduction amount for all my health plans.
Instead of deducting one dollar, it is deducting 4 dollars
Instead of deducting 3 dollars, it is deducting 12 dollars.
so each and every deduction amount is multiplied by 4.
I was checking each and every table, i haven't find any thing wrong, some one please help me to resolve this issue.
Thanks in Advance.
Regards,
Abhiram.Hi Keeran,
In the standard the contribution are taken depending on the employee pay period (payroll area). But I think you might be able to modify this process via a user exit, the best for your scenatrio, I think, is the one below:
Definition name PBEN_PAY0006
Definition short text Country exit for determination of EE contribution fixed per.
Hope this help
Sarah -
Benefits: Health plans show costs with bi-weekly rates in Enrollment screen
Hello,
I have created 2 new health plans. During testing, I noticed when trying to enroll employees via the Enrollment screen, the plan options show costs with bi-weekly rates rather than monthly rates. For these health plans, I had set the cost variants and costs rules to "Monthly." Is there another setting somewhere that I am missing? Please advise- thanksThe benefit payment model assignment is configured in view V_T74HE (note VARGU is getting from feature MODDE). You can check this payment model through view V_T549W to see what period parameter it's set to (PERMO). It's probably currently set to 'bi-weekly' instead of 'Monthly' in your system.
Rgds. -
Function Modules for Benefits Upload
Hi,
I am working on ECC 6.0 with HR 6.00
My requirement is to Create/Maintain
1) Benefits Savings Plan information (IT0169)
2) Family members/Dependents for this savings plan (IT0021)
Please let me know if there are any HR-BAPI function modules or HR function modules to achieve this.
Also can you please send me detailed information on the parameters for these function modules.
Thanks and Regards,
AdityaHi Kum,
I just checked HR_BEN_CREATE_SAVINGS_PLAN. This will definitely create a savings plan.
I need a function module to edit the savings plan also (preferably standard function module). Do let me know if one exists
Thanks and Regards,
Aditya -
Hi all ,
I need the documents on SAP HR-Benefits.
Regards
santosh .Benefit Administration:
This section of the Implementation Guide (IMG) is where you set the SAP Benefits Administration component.
Here you enter in the system all the details of the benefit plans offered by your company.
Benefit Area:
Benefit areas allow you to have separate administration of different benefit plan pools. This division is primarily for administrational purposes and would not normally be used for eligibility
IMG Path: Personnel Management  Benefits  Basic Settings  Define Benefit Area
Assign Currency to Benefit Area:
In this step, you specify the currency for the benefit area
IMG Path: Personnel Management  Benefits  Basic Settings  Assign Currency
this step, you enter the providers of the benefit plans you offer.
This could be the Insurance company, or Health Maintenance Organization that receives the benefit plan costs
IMG Path: Personnel Management  Benefits  Basic Settings  Define Benefit Providers
In this step, you set relevant benefit area for your Customizing activities
If you have more than one benefit area to set up, you must set up each independently. After you have set up all the plans in one area, you must return to this view, set the next current benefit area and work through the IMG again, setting up the new benefit area.
IMG Path: Personnel Management  Benefits  Basic Settings  Set Current Benefit Area
Benefit Plan Types:
In this step, you enter the benefit plan types that you require for the plan categories predefined in the system.
The following plan categories are provided by MSD:
Health Plans
o Medical
o Dental
o Vision
Insurance Plans
o Basic Life
o Supplemental Life
o Accidental Death & Dismember
Savings Plans
o 403B
o 457
o PERS (Public Employees retirement Scheme for CP Benefit Plan) & TRS
(Teachers Retirement Scheme for TP Benefit Plan)
Flexible Spending Accounts
o Health care
o Dependent care
IMG Path: Personnel Management  Benefits  Basic Settings  Plan Attributes  Define Benefit Plan Types
Define Benefit Plan Status:
It is important that you assigning statuses in order to be able to control the availability of plans with a minimum of effort. For example, you can control whether or not employees can enroll in a plan simply by changing its status
IMG Path: Personnel Management  Benefits  Basic Settings  Plan Attributes  Define Benefit Plan Status
Benefit Plan Status:
In this step, you define parameter groups. You decide which groups you require in two stages:
1. You consider which costs, credits, coverage and employee and employer contributions for your plans vary according to the age, salary and/or seniority of employees (or possibly the age of the employee's spouse).
2. You determine the different ways in which you need to divide your employees according to different value ranges for these criteria.
It is not possible to define overlaps of ranges for a criterion within a single parameter group. Therefore, if you require different employee groupings for different plans, you need to create a separate parameter group.
For each unique combination of criteria and their values, you need to define a parameter group.
In this step, you simply create the parameter groups to which you assign groups for the individual criteria in the following steps. You later refer to the parameter groups, where applicable, in the individual rule variants for plans. Since one parameter group can be referenced by multiple plans, Customizing effort is kept to a minimum. In the plan variant, you also have the flexibility of being able to specify that you only want to use certain criteria values belonging to a parameter group, for example, age ranges
IMG Path: Personnel Management  Benefits  Basic Settings  Define Employee Groupings  Define Employee Criteria Groups  Define Parameter Groups
Age Groups:
In this step, you define the age groups for the parameter groups that you defined in a previous step.
Depending on your needs, you may find for some parameter groups, you can leave out this step, if for example there is no requirement to differentiate between employees based on age
IMG Path: Personnel Management  Benefits  Basic Settings  Define Employee Groupings  Define Employee Criteria Groups  Define Age Groups
Age Groups under Parameter grouping PAR1
Cost Groupings:
In the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, job classification, marital status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying costs for different groups of employees
IMG Path: Personnel Management  Benefits  Basic Settings  Define Employee Groupings  Define Cost Groupings
Coverage Groupings:
In the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, employment contract, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying coverage for different groups of employees
IMG Path: Personnel Management  Benefits  Basic Settings  Define Employee Groupings  Define Coverage Groupings
Employee Contribution Groupings:
In the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for different groups of employees
IMG Path: Personnel Management  Benefits  Basic Settings  Define Employee Groupings  Define Employee Contribution Groupings
the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for different groups of employees
IMG Path: Personnel Management  Benefits  Basic Settings  Define Employee Groupings  Define Employer Contribution Groupings
the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for different groups of employees
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Define Employer Contribution Groupings
the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for different groups of employees
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Define Options for Health Plans
Dependent Coverage Options:
In this step, you define the dependent coverage that are used in health plans.
Define all possible variations that you need, because this view is not specific to any plan or plan option
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Define Dependent Coverage Options
Number of Dependents:
In this step, you can restrict participation in a health plan under a dependent coverage option to certain types of dependent, as determined by the subtypes of the Family/Related Persons infotype (0021). You can also define a minimum and maximum number of persons of a particular type that can be covered. During enrollment, the system only includes those dependent coverage options in the benefit offer for which the appropriate dependents are available
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Define Minimum and Maximum Number of Dependents
Define Cost Variants:
In this step you define cost variants to determine which factors influence the cost of a health plan for an employee. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual costs in this step. You simply define how costs vary according to:
Plan
Option
Dependent coverage
Employee data
Before you start to define cost variants, you need to do the following:
1. Determine how often costs vary for all the combinations of option and dependent coverage that you have defined in each plan.
This indicates how many cost variants you need. You can use the same cost variant more than once, for example, if costs are always identical for the dependent coverages 'employee only' and 'employee plus family' within a plan, regardless of the plan option
2. Determine how costs vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and cost grouping to determine cost. You can also indicate whether the gender of employees and whether or not they are smokers are cost criteria
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Define Cost Variants
Cost Rules:
You need to define costs for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Define Cost Rule
Health Plan Attributes:
In this step, you bring together all the definitions relevant to the health plan that you have made in the previous steps.
You assign to each health plan:
Its options
Relevant dependent coverages
The cost variants for the combination of options and dependent coverages
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Assign Health Plan Attributes
Insurance Plans:
In this step, you define general data for insurance plans
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Define Insurance Plan General Data
Coverage Variants:
In this step, you define coverage variants to determined which factors influence the coverage an employee is entitled to in a plan. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual coverage in this step. You simply define how coverage varies according to:
Plan
Coverage option
Employee data
Before you start to define coverage variants, you need to do the following:
1. Determine how often coverage varies for different coverage options.
This indicates how many coverage variants you need. Note the following:
If a plan has set coverages (including salary multiples), you need a
coverage variant for each.
If a plan allows employees to choose any amount of coverage within a
range, you need only one coverage variant.
If a plan has options, you will need a coverage variant for each option.
2. Determine how coverage varies according to employee data.
This determines how you need to set up your variants using employee groupings. For each variant, you can specify a parameter group and coverage grouping to determine coverage
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans 
Coverage Rules:
In this step, you define the actual coverages for a plan.
You need to define coverage for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only.
Coverage can be defined as a flat amount or as a factor of salary
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Define Coverage Rules
Cost Variants:
In this step you define cost variants to determine which factors influence the cost of an insurance plan for an employee. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual costs in this step. You simply define how costs vary according to:
Plan
Coverage option
Employee data
Before you start to define cost variants, you need to do the following:
1. Determine how often cost varies for different coverage options:
If an insurance plan has set flat coverage options and flat costs, you need
to define a cost variant for each flat cost.
If you have set flat coverage options and the flat costs are directly
proportional to the coverage stated in the flat cost, you need only one
cost variant.
If an employee can choose any amount of coverage within a range and the
cost of the coverage is directly proportional to the coverage, you need
only one cost variant.
2. Determine how costs vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and cost grouping to determine cost. You can also indicate whether the gender of employees and whether or not they are smokers are cost criteria
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Define Cost Variants
Cost Rules:
You need to define costs for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Define Cost Rules
Insurance Plan Attributes:
In this step, you bring together all those parts of an insurance plan, that you have already defined in the previous few steps.
You define the insurance plan options, then associate to each insurance plan:
Cost variant
Coverage variant
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Assign Insurance Plan Attributes
Combined Coverage Limits:
When you define coverages for plans such as insurance, you can set limits on the coverage amount. This is often used when the coverage is an amount dynamically calculated when the employee chooses her coverage.
However these limits apply only to one plan and yet you might need to define limits which combine the coverages of more than one plan.
In this chapter, you define these combined limits as follows:
1. The limit that might span 2 or more plans is reduced to a mathematical equation, where there is an amount on one side and plan coverages on the other side. The two sides of this equation are then DIVIDED BETWEEN the two views in this chapter.
2. The first view defines the limit in monetary terms which is one side of the equation. It also defines the operator (equals, is greater than, and so on).
3. The second view defines the other side of the equation in terms of the plan coverages
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Combined Coverage  Combined Coverage
Combined Coverage Limit Expressions:
In this step, you enter the second half of the equation, as discussed in combined coverage
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Combined Coverage  Define Combined Coverage Limit Expressions
Imputed Income for Selected Benefits:
In this section of the IMG, you define the criteria needed to calculate Imputed Income.
Imputed Income is based upon benefits paid for by the employer and calculated using rates set by the Internal Revenue Service (IRS). This value is then treated as taxable income for the employee
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Combined Coverage  Review Age Groups for Imputed Income
Review Calculation Factors for Imputed Income:
In this step, you check that the Imputed Income Rate Table entries are correct.
The imputed income age groups are associated with the rates/factors set by the IRS
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Combined Coverage  Review Calculation Factors for Imputed Income
Savings Plans:
In this step, you define general data for savings plans.
You have defined the relevant type, status, and provider for each plan in the Basic Settings section of the Benefits IMG
IMG Path: Personnel Management  Benefits  Plans  Savings Plans  Define Savings Plan General Data
Employee Contribution Variants:
In this step you define employee contribution variants to determine which factors influence the permitted employee contribution to a plan. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual contributions in this step. You simply define how contributions vary according to:
Plan
Option (only for plans in the plan category Miscellaneous)
Employee data
Before you start to define variants, you need to do the following:
1. Determine how often employee contributions vary for plans and any plan options.
This indicates how many contribution variants you need.
2. Determine how employee contributions vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and employee contribution grouping to determine employee contribution
IMG Path: Personnel Management  Benefits  Plans  Savings Plans  Define Employee Contribution Variants
Employee Contribution Rules:
In this step, you define the employee contribution limits for each plan.
You need to define employee contributions limits for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only.
You can define minimum and maximum employee contribution in the following ways:
As a fixed amount
As a percentage of salary
As a contribution unit
In Payroll, the total employee contribution is the sum of these amounts
IMG Path: Personnel Management  Benefits  Plans  Savings Plans  Define Employee Contribution Rules
Employer Contribution Variants:
In this step you define employer contribution variants to determine which factors influence the contribution the employer makes to a plan. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual contribution in this step. You only define how contributions vary according to:
Plan
Option (only for plans in the plan category Miscellaneous)
Employee data
Before you start to define variants, you need to do the following:
1. Determine how often employee contributions vary for plans and any plan options.
This indicates how many contribution variants you need.
2. Determine how employee contributions vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and employer contribution grouping to determine employer contribution
IMG Path: Personnel Management  Benefits  Plans  Savings Plans  Define Employer Contribution Variants
Employer Contribution Rules:
In this step, you define limits for the contributions made by the employer to employee plans. You so this for each employer contribution variant for each plan.
You need to define employer contributions limits for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only.
You can define the employer contribution and the contribution limit in either of the following ways:
As a fixed amount / as an amount per unit contributed by the employee
As a percentage of employee base salary or employee contribution
IMG Path: Personnel Management  Benefits  Plans  Savings Plans  Define Employer Contribution Rules
Assign Savings Plan Attributes:
In this step, you complete the definition of savings plans by bringing together the relevant elements that you have already defined:
EE contribution variant
ER contribution variant
IMG Path: Personnel Management  Benefits  Plans  Savings Plans  Assign Savings Plan Attributes
Flexible Spending Accounts (FSAs):
In this step, you define general data for flexible spending accounts (FSAs).
Requirements
You have created the appropriate plan type , plan status, and benefit provider in the preceding steps
IMG Path: Personnel Management  Benefits  Plans  Flexible Spending Accounts (FSAs)  Define Spending Account General Data
Assign Spending Account Attributes:
In this step, you enter the details of your flexible spending accounts including contribution limits, an employer contribution variant (if required), and rules for the reimbursement of claims
IMG Path: Personnel Management  Benefits  Plans  Flexible Spending Accounts (FSAs)  Assign Spending Account Attributes
Flexible Administration:
In this chapter, you define the flexible aspects of your Benefits administration. You define the availability of plans to your employees, in terms of the plans themselves. You also define aspects of the enrollment process.
you enter parameters that apply to processing within an entire benefits area, including:
Open enrollment period dates
Default validity dates for adjustment/standard plan records
Advance availability of future plans
Dependent age limits
IMG Path: Personnel Management  Benefits  Flexible Administration  Define Administrative Parameters
Benefit Adjustment Groupings:
In this step, you define adjustment groupings. These groupings allow you to specify different adjustment permissions for different groups of employees
IMG Path: Personnel Management  Benefits  Flexible Administration  Benefits Adjustment Reasons  Define Benefit Adjustment Groupings
Benefit Adjustment Reasons:
In this step, you define adjustment reasons to control changes to employee enrollments according to company policy.
The adjustment reason types that you define here are assigned as subtypes of Adjustment Reasons records (infotype 0378) in HR Master Data. Since a record can only have one subtype, a new record must be created for every adjustment reason an employee experiences.
According to the adjustment concept, an employee can only make changes to her enrollments if she has an Adjustment Reasons record (infotype 0378) with the required adjustment reason as a subtype. The only exceptions to this are if changes are made during an open enrollment period or if an anytime adjustment reason is assigned to the plan type.
In addition to defining adjustment reasons for certain events that can trigger changes, you may also want to define a special adjustment reason to allow changes to plans at any time
IMG Path: Personnel Management  Benefits  Flexible Administration  Benefits Adjustment Reasons  Define Benefit Adjustment Reasons
Adjustment Permissions:
In this section, you assign adjustment permissions to each benefit plan type for an adjustment reason and any adjustment grouping that you have defined.
Note that the elements for which you can define permissions are automatically determined by the system, dependent on the plan category
Health Plans:
In this step, you define the changes permitted for all plans of this type. You do this for each combination of adjustment reason, adjustment grouping, and plan type
IMG Path: Personnel Management  Benefits  Flexible Administration  Benefits Adjustment Reasons  Define Adjustment Permissions  Health Plans
this step, you define the changes permitted for all plans of this type. You do this for each combination of adjustment reason, adjustment grouping, and plan type
IMG Path: Personnel Management  Benefits  Flexible Administration  Benefits Adjustment Reasons  Define Adjustment Permissions  Insurance Plans
Savings Plans:
In this step, you define the changes permitted for all plans of this type. You do this for each combination of adjustment reason, adjustment grouping, and plan type
IMG Path: Personnel Management  Benefits  Flexible Administration  Benefits Adjustment Reasons  Define Adjustment Permissions  Savings Plans
Spending Accounts:
In this step, you define the changes permitted for all plans of this type. You do this for each combination of adjustment reason, adjustment grouping, and plan type
IMG Path: Personnel Management  Benefits  Flexible Administration  Benefits Adjustment Reasons  Define Adjustment Permissions  Spending Account
Programs:
In this section of the IMG, you define benefit programs and the eligibility restrictions and termination conditions for the plans within these programs.
Within a program, eligibility for plans can be determined on two levels:
Program groupings control eligibility on a high level (macro-eligibility) by allocating an employee a defined program, depending on his/her organizational and employment data.
Eligibility rules are optional and control eligibility on a low level (micro-eligibility) by determining whether an employee can participate in a plan within the relevant program. An employee must fulfill the conditions defined in the rule in order to be able to enroll. Eligibility rules are assigned to plans in programs by means of an eligibility variant.
First Program Grouping:
In this step, you define first program groupings. Later, you define programs for a combination of first and second program groupings.
Identical attributes are available for the setup of both the first and second program groupings, and they are therefore interchangeable. The fact that you determine macro-eligibility for a program using two dimensions means that you are able to make finer distinctions between groups of employees
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Define First Program Grouping
Second Program Grouping:
In this step, you define second program groupings. Later, you define programs for a combination of first and second program groupings.
Identical attributes are available for the setup of both the first and second program groupings, and they are therefore interchangeable. The fact that you determine macro-eligibility for a program using two dimensions means that you are able to make finer distinctions between groups of employees
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Define Second Program Grouping
Employee Eligibility:
In this section of the IMG, you define the criteria according to which you control eligibility for individual benefit plans within a benefits program (definition of micro-eligibility). You perform the following steps to set up eligiblity requirements:
You define eligibility grouping to identify groups of employees for whom
certain eligibility criteria apply.
You create eligibility variants, which you later use to link eligibility
rules to programs.
If necessary, you define dynamic eligibility conditions relating
specifically to actual hours worked/length of service, or zip codes.
You bring your definitions together in the eligibility rule, where you
can also specify further conditions for enrollment.
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Employee Eligibility  Define Eligibility Groupings
Eligibility Variants:
In this step, you define eligibility variants. These consist simply of an identifier and a description
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Employee Eligibility  Define Eligibility Variants
Eligibility Rules:
In this step, you define eligibility rules for the benefit plans offered by your organization. You define these rules for combinations of eligibility grouping and eligibility variant, thereby determining the eligibility conditions that will apply for different groups of employees
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Employee Eligibility  Define Eligibility Rules
Participation Termination:
In this section of the implementation guide you define criteria for the termination of benefit plans
Termination Groupings:
In this section of the implementation guide you define criteria for the termination of benefit plans
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Participation Termination  Define Termination Groupings
Termination Variants:
In this step, you define termination variants. These consist simply of an identifier and a description
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Participation Termination  Define Termination Variants
Termination Rules:
In this step, you define termination rules. You define these rules for every combination of termination grouping and termination variant, thereby determining the coverage continuation periods and termination day that will apply for different groups of employees
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Participation Termination  Define Termination Rules
Define Benefit Programs:
In this step, you define termination rules. You define these rules for every combination of termination grouping and termination variant, thereby determining the coverage continuation periods and termination day that will apply for different groups of employees
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Define Benefit Programs
Dependent/Beneficiary Eligibility:
In this step, you define family member groupings and determine how family members are allocated to these groupings
IMG Path: Personnel Management  Benefits  Flexible Administration  Dependent/Beneficiary Eligibility  Define Family Member Groupings
Dependent Eligibility Rule Variants:
In this step, you define the dependent eligibility variants to which you want to assign dependent eligibility rules. You also specify whether you wish to use a family member grouping in the associated eligibility rule to restrict eligibility to types of family members with certain characteristics
IMG Path: Personnel Management  Benefits  Flexible Administration  Dependent/Beneficiary Eligibility  Define Dependent Eligibility Rule Variants
Dependent Eligibility Rules:
In this step, you define dependent eligibility rules to determine which types of family member are eligible as dependents. You then assign your rules to the appropriate plans by means of a rule variant in the step Assign Eligibility Rule Variant to Plan
IMG Path: Personnel Management  Benefits  Flexible Administration  Dependent/Beneficiary Eligibility  Define Dependent Eligibility Rules
Beneficiary Eligibility Rule Variants:
In this step, you define the beneficiary eligibility variants to which you assign beneficiary eligibility rules in the next step. You also specify the following:
Whether you want to use a family member grouping in the associated eligibility rule to restrict eligibility to types of family members with certain characteristics
Whether the following apply for plans to which the variant is assigned:
 The employee can be a beneficiary
 Contingency beneficiaries can be named
 Spouse approval is required if beneficiaries other than the spouse are to be amed (the system only takes this setting into consideration for plans of the category avings)
IMG Path: Personnel Management  Benefits  Flexible Administration  Dependent/Beneficiary Eligibility  Define Beneficiary Eligibility Rule Variants
Beneficiary Eligibility Rules:
In this step, you define beneficiary eligibility rules to determine which types of family member are eligible as beneficiaries. You then assign your rules to the appropriate plans by means of a rule variant in the step Assign Eligibility Rule Variant to Plan
IMG Path: Personnel Management  Benefits  Flexible Administration  Dependent/Beneficiary Eligibility  Define Beneficiary Eligibility Rules
Assign Eligibility Rule Variant to Plan:
In this step, you assign dependent eligibility variants and beneficiary eligibility variants to plans, thereby assigning the eligibility rules associated with these variants
IMG Path: Personnel Management  Benefits  Flexible Administration  Dependent/Beneficiary Eligibility  Assign Eligibility Rule Variant to Plan
COBRA Plans:
In this step, you specify which health plans that you have already defined in the system are COBRA-relevant.
When a clerk collects COBRA-qualified beneficiaries, the system only considers employee enrollments in the plans you select here as legitimate cases where COBRA must be offered to the employee
IMG Path: Personnel Management  Benefits  COBRA  Choose COBRA Plans
this step, you determine for which flexible spending accounts (FSAs) you will offer continuation of coverage under COBRA. You need to do this for each benefit area separately
IMG Path: Personnel Management  Benefits  COBRA  Choose COBRA Spending Accounts
Qualifying Event Coverage Periods:
In this step, you define the events that qualify individuals for COBRA coverage, and the periods of permitted coverage continuation for each qualifying event type. COBRA legislation states the following regarding coverage continuation periods:
In the case of Termination of employment and Reduction in working hours, only 18 months coverage must be provided. If qualified beneficiaries are determined to be disabled within 60 days of the COBRA event, they are entitled to a further 11 months of coverage, as are the other qualified beneficiaries who experienced the original event.
For all other qualifying events except Bankruptcy of employer, a qualified beneficiary is entitled to 36 months continuation coverage, and there is no extension provision for disability.
In the case of the event Bankruptcy of employer, the coverage continuation period is the life of the retired employee or retired employee's widow/widower. You therefore do not need to define a continuation period in this case.
IMG Path: Personnel Management  Benefits  COBRA  Define Qualifying Event Coverage Periods
Assign COBRA Events to Personnel Actions:
In this step, you define how the system recognizes COBRA-qualifying events from employee personnel actions (infotype 0000) records. You do this by creating a link between the two.
The only COBRA-qualifying event types that you assign to personnel actions are:
Termination
Death of employee
Reduction in hours
You need to assign these COBRA-qualifying event types since they are based on customizable entries in your HR master data and therefore cannot be delivered as standard.
When the system collects COBRA-qualified beneficiaries, it considers employee records within the date range you specify in two stages as follows:
1. The system searches for employee personnel action (infotype 0000) records. The COBRA qualifying events assigned to any personnel actions found are collected.
2. The system checks other employee infotype records for specific information which corresponds to COBRA-qualifying event types
IMG Path: Personnel Management  Benefits  COBRA  Assign COBRA Events to Personnel Actions
Notification and Payment Intervals:
In this step, you define details of COBRA administration for those states where state law concerning COBRA differs from federal law.
Federal regulations are reflected in the state settings for the District of Columbia, which is also the system default.
If you must comply with state regulations that differ from the federal regulations, you should create a new state entry. Otherwise, you can use the DC version for all employees, regardless of which state they reside in
IMG Path: Personnel Management  Benefits  COBRA  Define Notification and Payment Intervals
heck this one and let me know if there is anything else even arun has also given nice response so if u have any query pls revert back
6 -
Hi All,
Where can I see all the health plans available in one Benefits Area, irrespective of employee qualified or not.
Thanks in Advance.Using transaction SPRO, use item Plan Overview utilizing the following IMG path:
Personnel Management > Benefits > Toolset > Plan Overview
Populate 'Benefit area' appropriately and 'Execute'. -
CONFIGURATION STEPS IN U.S 401(K) SAVINGS BENEFIT PLAN
Hi Experts,
can u please let me know the configuration steps involved in 401(k) benefits plan.If you are having any docs on Benefits configuration,please send me on [email protected]
Thanks in Advance.
sairamHi Associates,
If you have any information on configuration on 401( k), U.S Benefits Savings plan
please provide the configuration steps.
Thanks in advance.
SAIRAM -
Hi Gurus,
Can you please give me any documentation or ppt's on the benefits or why to implement SAP HR Module???
Please give me some details.
Thank YouBenefit Administration:
This section of the Implementation Guide (IMG) is where you set the SAP Benefits Administration component.
Here you enter in the system all the details of the benefit plans offered by your company.
Benefit Area:
Benefit areas allow you to have separate administration of different benefit plan pools. This division is primarily for administrational purposes and would not normally be used for eligibility
Basic Settings Benefits IMG Path: Personnel Management Define Benefit Area
Assign Currency to Benefit Area:
In this step, you specify the currency for the benefit area
IMG Path: Personnel Management Assign Currency Basic Settings Benefits
this step, you enter the providers of the benefit plans you offer.
This could be the Insurance company, or Health Maintenance Organization that receives the benefit plan costs
Define Basic Settings Benefits IMG Path: Personnel Management Benefit Providers
In this step, you set relevant benefit area for your Customizing activities
If you have more than one benefit area to set up, you must set up each independently. After you have set up all the plans in one area, you must return to this view, set the next current benefit area and work through the IMG again, setting up the new benefit area.
IMG Path: Personnel Set Current Benefit Area Basic Settings Benefits Management
Benefit Plan Types:
In this step, you enter the benefit plan types that you require for the plan categories predefined in the system.
The following plan categories are provided by MSD:
Health Plans
o Medical
o Dental
o Vision
Insurance Plans
o Basic Life
o Supplemental Life
o Accidental Death & Dismember
Savings Plans
o 403B
o 457
o PERS (Public Employees retirement Scheme for CP Benefit Plan) & TRS
(Teachers Retirement Scheme for TP Benefit Plan)
Flexible Spending Accounts
o Health care
o Dependent care
IMG Path: Personnel Define Benefit Plan Plan Attributes Basic Settings Benefits Management Types
Define Benefit Plan Status:
It is important that you assigning statuses in order to be able to control the availability of plans with a minimum of effort. For example, you can control whether or not employees can enroll in a plan simply by changing its status
IMG Path: Personnel Management Define Benefit Plan Plan Attributes Basic Settings Benefits Status
Benefit Plan Status:
In this step, you define parameter groups. You decide which groups you require in two stages:
1. You consider which costs, credits, coverage and employee and employer contributions for your plans vary according to the age, salary and/or seniority of employees (or possibly the age of the employee's spouse).
2. You determine the different ways in which you need to divide your employees according to different value ranges for these criteria.
It is not possible to define overlaps of ranges for a criterion within a single parameter group. Therefore, if you require different employee groupings for different plans, you need to create a separate parameter group.
For each unique combination of criteria and their values, you need to define a parameter group.
In this step, you simply create the parameter groups to which you assign groups for the individual criteria in the following steps. You later refer to the parameter groups, where applicable, in the individual rule variants for plans. Since one parameter group can be referenced by multiple plans, Customizing effort is kept to a minimum. In the plan variant, you also have the flexibility of being able to specify that you only want to use certain criteria values belonging to a parameter group, for example, age ranges
Basic Settings Benefits IMG Path: Personnel Management Define Parameter Define Employee Criteria Groups Define Employee Groupings Groups
Age Groups:
In this step, you define the age groups for the parameter groups that you defined in a previous step.
Depending on your needs, you may find for some parameter groups, you can leave out this step, if for example there is no requirement to differentiate between employees based on age
Define Basic Settings Benefits IMG Path: Personnel Management Define Age Define Employee Criteria Groups Employee Groupings Groups
Age Groups under Parameter grouping PAR1
Cost Groupings:
In the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, job classification, marital status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying costs for different groups of employees
IMG Path: Personnel Management Define Cost Define Employee Groupings Basic Settings Benefits Groupings
Coverage Groupings:
In the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, employment contract, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying coverage for different groups of employees
Define Basic Settings Benefits IMG Path: Personnel Management Define Coverage GroupingsEmployee Groupings
Employee Contribution Groupings:
In the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for different groups of employees
IMG Path: Personnel Define Define Employee Groupings Basic Settings Benefits Management Employee Contribution Groupings
the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for different groups of employees
Define Basic Settings Benefits IMG Path: Personnel Management Define Employer Contribution GroupingsEmployee Groupings
the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for different groups of employees
Benefits IMG Path: Personnel Management Define Employer Contribution Groupings Health Plans Plans
the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for different groups of employees
Benefits IMG Path: Personnel Management Define Options for Health Plans Health Plans Plans
Dependent Coverage Options:
In this step, you define the dependent coverage that are used in health plans.
Define all possible variations that you need, because this view is not specific to any plan or plan option
IMG Path: Personnel Management Define Dependent Coverage Options Health Plans Plans Benefits
Number of Dependents:
In this step, you can restrict participation in a health plan under a dependent coverage option to certain types of dependent, as determined by the subtypes of the Family/Related Persons infotype (0021). You can also define a minimum and maximum number of persons of a particular type that can be covered. During enrollment, the system only includes those dependent coverage options in the benefit offer for which the appropriate dependents are available
Health Plans Benefits IMG Path: Personnel Management Define Minimum and Maximum Number of DependentsPlans
Define Cost Variants:
In this step you define cost variants to determine which factors influence the cost of a health plan for an employee. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual costs in this step. You simply define how costs vary according to:
Plan
Option
Dependent coverage
Employee data
Before you start to define cost variants, you need to do the following:
1. Determine how often costs vary for all the combinations of option and dependent coverage that you have defined in each plan.
This indicates how many cost variants you need. You can use the same cost variant more than once, for example, if costs are always identical for the dependent coverages 'employee only' and 'employee plus family' within a plan, regardless of the plan option
2. Determine how costs vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and cost grouping to determine cost. You can also indicate whether the gender of employees and whether or not they are smokers are cost criteria
Define Health Plans Plans Benefits IMG Path: Personnel Management Cost Variants
Cost Rules:
You need to define costs for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only
Health Plans Benefits IMG Path: Personnel Management Define Cost RulePlans
Health Plan Attributes:
In this step, you bring together all the definitions relevant to the health plan that you have made in the previous steps.
You assign to each health plan:
Its options
Relevant dependent coverages
The cost variants for the combination of options and dependent coverages
IMG Path: Personnel Management Assign Health Plan Attributes Health Plans Plans Benefits
Insurance Plans:
In this step, you define general data for insurance plans
IMG Define Insurance Plans Plans Benefits Path: Personnel Management Insurance Plan General Data
Coverage Variants:
In this step, you define coverage variants to determined which factors influence the coverage an employee is entitled to in a plan. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual coverage in this step. You simply define how coverage varies according to:
Plan
Coverage option
Employee data
Before you start to define coverage variants, you need to do the following:
1. Determine how often coverage varies for different coverage options.
This indicates how many coverage variants you need. Note the following:
If a plan has set coverages (including salary multiples), you need a
coverage variant for each.
If a plan allows employees to choose any amount of coverage within a
range, you need only one coverage variant.
If a plan has options, you will need a coverage variant for each option.
2. Determine how coverage varies according to employee data.
This determines how you need to set up your variants using employee groupings. For each variant, you can specify a parameter group and coverage grouping to determine coverage
Plans Benefits IMG Path: Personnel Management Insurance Plans
Coverage Rules:
In this step, you define the actual coverages for a plan.
You need to define coverage for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only.
Coverage can be defined as a flat amount or as a factor of salary
Insurance Plans Plans Benefits IMG Path: Personnel Management Define Coverage Rules
Cost Variants:
In this step you define cost variants to determine which factors influence the cost of an insurance plan for an employee. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual costs in this step. You simply define how costs vary according to:
Plan
Coverage option
Employee data
Before you start to define cost variants, you need to do the following:
1. Determine how often cost varies for different coverage options:
If an insurance plan has set flat coverage options and flat costs, you need
to define a cost variant for each flat cost.
If you have set flat coverage options and the flat costs are directly
proportional to the coverage stated in the flat cost, you need only one
cost variant.
If an employee can choose any amount of coverage within a range and the
cost of the coverage is directly proportional to the coverage, you need
only one cost variant.
2. Determine how costs vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and cost grouping to determine cost. You can also indicate whether the gender of employees and whether or not they are smokers are cost criteria
IMG Path: Define Cost Insurance Plans Plans Benefits Personnel Management Variants
Cost Rules:
You need to define costs for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only
Insurance Plans Benefits IMG Path: Personnel Management Define Cost RulesPlans
Insurance Plan Attributes:
In this step, you bring together all those parts of an insurance plan, that you have already defined in the previous few steps.
You define the insurance plan options, then associate to each insurance plan:
Cost variant
Coverage variant
Insurance Plans Plans Benefits IMG Path: Personnel Management Assign Insurance Plan Attributes
Combined Coverage Limits:
When you define coverages for plans such as insurance, you can set limits on the coverage amount. This is often used when the coverage is an amount dynamically calculated when the employee chooses her coverage.
However these limits apply only to one plan and yet you might need to define limits which combine the coverages of more than one plan.
In this chapter, you define these combined limits as follows:
1. The limit that might span 2 or more plans is reduced to a mathematical equation, where there is an amount on one side and plan coverages on the other side. The two sides of this equation are then DIVIDED BETWEEN the two views in this chapter.
2. The first view defines the limit in monetary terms which is one side of the equation. It also defines the operator (equals, is greater than, and so on).
3. The second view defines the other side of the equation in terms of the plan coverages
IMG Path: Personnel Management Combined Combined Coverage Insurance Plans Plans Benefits Coverage
Combined Coverage Limit Expressions:
In this step, you enter the second half of the equation, as discussed in combined coverage
IMG Path: Combined Coverage Insurance Plans Plans Benefits Personnel Management Define Combined Coverage Limit Expressions
Imputed Income for Selected Benefits:
In this section of the IMG, you define the criteria needed to calculate Imputed Income.
Imputed Income is based upon benefits paid for by the employer and calculated using rates set by the Internal Revenue Service (IRS). This value is then treated as taxable income for the employee
IMG Combined Insurance Plans Plans Benefits Path: Personnel Management Review Age Groups for Imputed IncomeCoverage
Review Calculation Factors for Imputed Income:
In this step, you check that the Imputed Income Rate Table entries are correct.
The imputed income age groups are associated with the rates/factors set by the IRS
IMG Path: Personnel Management Review Calculation Combined Coverage Insurance Plans Plans Benefits Factors for Imputed Income
Savings Plans:
In this step, you define general data for savings plans.
You have defined the relevant type, status, and provider for each plan in the Basic Settings section of the Benefits IMG
Savings Plans Plans Benefits IMG Path: Personnel Management Define Savings Plan General Data
Employee Contribution Variants:
In this step you define employee contribution variants to determine which factors influence the permitted employee contribution to a plan. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual contributions in this step. You simply define how contributions vary according to:
Plan
Option (only for plans in the plan category Miscellaneous)
Employee data
Before you start to define variants, you need to do the following:
1. Determine how often employee contributions vary for plans and any plan options.
This indicates how many contribution variants you need.
2. Determine how employee contributions vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and employee contribution grouping to determine employee contribution
IMG Path: Define Employee Savings Plans Plans Benefits Personnel Management Contribution Variants
Employee Contribution Rules:
In this step, you define the employee contribution limits for each plan.
You need to define employee contributions limits for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only.
You can define minimum and maximum employee contribution in the following ways:
As a fixed amount
As a percentage of salary
As a contribution unit
In Payroll, the total employee contribution is the sum of these amounts
IMG Path: Define Employee Savings Plans Plans Benefits Personnel Management Contribution Rules
Employer Contribution Variants:
In this step you define employer contribution variants to determine which factors influence the contribution the employer makes to a plan. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual contribution in this step. You only define how contributions vary according to:
Plan
Option (only for plans in the plan category Miscellaneous)
Employee data
Before you start to define variants, you need to do the following:
1. Determine how often employee contributions vary for plans and any plan options.
This indicates how many contribution variants you need.
2. Determine how employee contributions vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and employer contribution grouping to determine employer contribution
IMG Path: Personnel Define Employer Contribution Savings Plans Plans Benefits Management Variants
Employer Contribution Rules:
In this step, you define limits for the contributions made by the employer to employee plans. You so this for each employer contribution variant for each plan.
You need to define employer contributions limits for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only.
You can define the employer contribution and the contribution limit in either of the following ways:
As a fixed amount / as an amount per unit contributed by the employee
As a percentage of employee base salary or employee contribution
IMG Path: Define Employer Savings Plans Plans Benefits Personnel Management Contribution Rules
Assign Savings Plan Attributes:
In this step, you complete the definition of savings plans by bringing together the relevant elements that you have already defined:
EE contribution variant
ER contribution variant
Plans Benefits IMG Path: Personnel Management Assign Savings Plan AttributesSavings Plans
Flexible Spending Accounts (FSAs):
In this step, you define general data for flexible spending accounts (FSAs).
Requirements
You have created the appropriate plan type , plan status, and benefit provider in the preceding steps
IMG Path: Personnel Define Flexible Spending Accounts (FSAs) Plans Benefits Management Spending Account General Data
Assign Spending Account Attributes:
In this step, you enter the details of your flexible spending accounts including contribution limits, an employer contribution variant (if required), and rules for the reimbursement of claims
BenefitsIMG Path: Personnel Management Assign Spending Account Flexible Spending Accounts (FSAs) Plans Attributes
Flexible Administration:
In this chapter, you define the flexible aspects of your Benefits administration. You define the availability of plans to your employees, in terms of the plans themselves. You also define aspects of the enrollment process.
you enter parameters that apply to processing within an entire benefits area, including:
Open enrollment period dates
Default validity dates for adjustment/standard plan records
Advance availability of future plans
Dependent age limits
Flexible Administration Benefits IMG Path: Personnel Management Define Administrative Parameters
Benefit Adjustment Groupings:
In this step, you define adjustment groupings. These groupings allow you to specify different adjustment permissions for different groups of employees
IMG Benefits Flexible Administration Benefits Path: Personnel Management Define Benefit Adjustment GroupingsAdjustment Reasons
Benefit Adjustment Reasons:
In this step, you define adjustment reasons to control changes to employee enrollments according to company policy.
The adjustment reason types that you define here are assigned as subtypes of Adjustment Reasons records (infotype 0378) in HR Master Data. Since a record can only have one subtype, a new record must be created for every adjustment reason an employee experiences.
According to the adjustment concept, an employee can only make changes to her enrollments if she has an Adjustment Reasons record (infotype 0378) with the required adjustment reason as a subtype. The only exceptions to this are if changes are made during an open enrollment period or if an anytime adjustment reason is assigned to the plan type.
In addition to defining adjustment reasons for certain events that can trigger changes, you may also want to define a special adjustment reason to allow changes to plans at any time
Flexible Administration Benefits IMG Path: Personnel Management Define Benefit Adjustment ReasonsBenefits Adjustment Reasons
Adjustment Permissions:
In this section, you assign adjustment permissions to each benefit plan type for an adjustment reason and any adjustment grouping that you have defined.
Note that the elements for which you can define permissions are automatically determined by the system, dependent on the plan category
Health Plans:
In this step, you define the changes permitted for all plans of this type. You do this for each combination of adjustment reason, adjustment grouping, and plan type
Benefits IMG Path: Personnel Management Define Adjustment Benefits Adjustment Reasons Flexible Administration Health PlansPermissions
this step, you define the changes permitted for all plans of this type. You do this for each combination of adjustment reason, adjustment grouping, and plan type
IMG Path: Personnel Management Define Benefits Adjustment Reasons Flexible Administration Benefits Insurance PlansAdjustment Permissions
Savings Plans:
In this step, you define the changes permitted for all plans of this type. You do this for each combination of adjustment reason, adjustment grouping, and plan type
IMG Benefits Flexible Administration Benefits Path: Personnel Management Savings Plans Define Adjustment Permissions Adjustment Reasons
Spending Accounts:
In this step, you define the changes permitted for all plans of this type. You do this for each combination of adjustment reason, adjustment grouping, and plan type
Benefits IMG Path: Personnel Management Define Adjustment Benefits Adjustment Reasons Flexible Administration Spending AccountPermissions
Programs:
In this section of the IMG, you define benefit programs and the eligibility restrictions and termination conditions for the plans within these programs.
Within a program, eligibility for plans can be determined on two levels:
Program groupings control eligibility on a high level (macro-eligibility) by allocating an employee a defined program, depending on his/her organizational and employment data.
Eligibility rules are optional and control eligibility on a low level (micro-eligibility) by determining whether an employee can participate in a plan within the relevant program. An employee must fulfill the conditions defined in the rule in order to be able to enroll. Eligibility rules are assigned to plans in programs by means of an eligibility variant.
First Program Grouping:
In this step, you define first program groupings. Later, you define programs for a combination of first and second program groupings.
Identical attributes are available for the setup of both the first and second program groupings, and they are therefore interchangeable. The fact that you determine macro-eligibility for a program using two dimensions means that you are able to make finer distinctions between groups of employees
IMG Path: Personnel Define First Programs Flexible Administration Benefits Management Program Grouping
Second Program Grouping:
In this step, you define second program groupings. Later, you define programs for a combination of first and second program groupings.
Identical attributes are available for the setup of both the first and second program groupings, and they are therefore interchangeable. The fact that you determine macro-eligibility for a program using two dimensions means that you are able to make finer distinctions between groups of employees
Flexible Benefits IMG Path: Personnel Management Define Second Program Grouping Programs Administration
Employee Eligibility:
In this section of the IMG, you define the criteria according to which you control eligibility for individual benefit plans within a benefits program (definition of micro-eligibility). You perform the following steps to set up eligiblity requirements:
You define eligibility grouping to identify groups of employees for whom
certain eligibility criteria apply.
You create eligibility variants, which you later use to link eligibility
rules to programs.
If necessary, you define dynamic eligibility conditions relating
specifically to actual hours worked/length of service, or zip codes.
You bring your definitions together in the eligibility rule, where you
can also specify further conditions for enrollment.
IMG Path: Employee Programs Flexible Administration Benefits Personnel Management Define Eligibility GroupingsEligibility
Eligibility Variants:
In this step, you define eligibility variants. These consist simply of an identifier and a description
Flexible Benefits IMG Path: Personnel Management Define Eligibility Employee Eligibility Programs Administration Variants
Eligibility Rules:
In this step, you define eligibility rules for the benefit plans offered by your organization. You define these rules for combinations of eligibility grouping and eligibility variant, thereby determining the eligibility conditions that will apply for different groups of employees
Flexible Benefits IMG Path: Personnel Management Define Eligibility Employee Eligibility Programs Administration Rules
Participation Termination:
In this section of the implementation guide you define criteria for the termination of benefit plans
Termination Groupings:
In this section of the implementation guide you define criteria for the termination of benefit plans
IMG Path: Programs Flexible Administration Benefits Personnel Management Define Termination GroupingsParticipation Termination
Termination Variants:
In this step, you define termination variants. These consist simply of an identifier and a description
IMG Path: Personnel Management Participation Termination Programs Flexible Administration Benefits Define Termination Variants
Termination Rules:
In this step, you define termination rules. You define these rules for every combination of termination grouping and termination variant, thereby determining the coverage continuation periods and termination day that will apply for different groups of employees
Flexible Benefits IMG Path: Personnel Management Define Termination Participation Termination Programs Administration Rules
Define Benefit Programs:
In this step, you define termination rules. You define these rules for every combination of termination grouping and termination variant, thereby determining the coverage continuation periods and termination day that will apply for different groups of employees
IMG Programs Flexible Administration Benefits Path: Personnel Management Define Benefit Programs
Dependent/Beneficiary Eligibility:
In this step, you define family member groupings and determine how family members are allocated to these groupings
Benefits IMG Path: Personnel Management Define Family Dependent/Beneficiary Eligibility Flexible Administration Member Groupings
Dependent Eligibility Rule Variants:
In this step, you define the dependent eligibility variants to which you want to assign dependent eligibility rules. You also specify whether you wish to use a family member grouping in the associated eligibility rule to restrict eligibility to types of family members with certain characteristics
IMG Path: Personnel Management Define Dependent/Beneficiary Eligibility Flexible Administration Benefits Dependent Eligibility Rule Variants
Dependent Eligibility Rules:
In this step, you define dependent eligibility rules to determine which types of family member are eligible as dependents. You then assign your rules to the appropriate plans by means of a rule variant in the step Assign Eligibility Rule Variant to Plan
Flexible Administration Benefits IMG Path: Personnel Management Define Dependent EligibilityDependent/Beneficiary Eligibility Rules
Beneficiary Eligibility Rule Variants:
In this step, you define the beneficiary eligibility variants to which you assign beneficiary eligibility rules in the next step. You also specify the following:
Whether you want to use a family member grouping in the associated eligibility rule to restrict eligibility to types of family members with certain characteristics
Whether the following apply for plans to which the variant is assigned:
The employee can be a beneficiary
Contingency beneficiaries can be named
Spouse approval is required if beneficiaries other than the spouse are to be amed (the system only takes this setting into consideration for plans of the category avings)
IMG Path: Personnel Dependent/Beneficiary Flexible Administration Benefits Management Define Beneficiary Eligibility Rule VariantsEligibility
Beneficiary Eligibility Rules:
In this step, you define beneficiary eligibility rules to determine which types of family member are eligible as beneficiaries. You then assign your rules to the appropriate plans by means of a rule variant in the step Assign Eligibility Rule Variant to Plan
Flexible Administration Benefits IMG Path: Personnel Management Define Beneficiary EligibilityDependent/Beneficiary Eligibility Rules
Assign Eligibility Rule Variant to Plan:
In this step, you assign dependent eligibility variants and beneficiary eligibility variants to plans, thereby assigning the eligibility rules associated with these variants
Flexible Administration Benefits IMG Path: Personnel Management Assign Eligibility Rule Variant toDependent/Beneficiary Eligibility Plan
COBRA Plans:
In this step, you specify which health plans that you have already defined in the system are COBRA-relevant.
When a clerk collects COBRA-qualified beneficiaries, the system only considers employee enrollments in the plans you select here as legitimate cases where COBRA must be offered to the employee
Choose COBRA COBRA Benefits IMG Path: Personnel Management Plans
this step, you determine for which flexible spending accounts (FSAs) you will offer continuation of coverage under COBRA. You need to do this for each benefit area separately
Choose COBRA Spending COBRA Benefits IMG Path: Personnel Management Accounts
Qualifying Event Coverage Periods:
In this step, you define the events that qualify individuals for COBRA coverage, and the periods of permitted coverage continuation for each qualifying event type. COBRA legislation states the following regarding coverage continuation periods:
In the case of Termination of employment and Reduction in working hours, only 18 months coverage must be provided. If qualified beneficiaries are determined to be disabled within 60 days of the COBRA event, they are entitled to a further 11 months of coverage, as are the other qualified beneficiaries who experienced the original event.
For all other qualifying events except Bankruptcy of employer, a qualified beneficiary is entitled to 36 months continuation coverage, and there is no extension provision for disability.
In the case of the event Bankruptcy of employer, the coverage continuation period is the life of the retired employee or retired employee's widow/widower. You therefore do not need to define a continuation period in this case.
Define Qualifying Event COBRA Benefits IMG Path: Personnel Management Coverage Periods
Assign COBRA Events to Personnel Actions:
In this step, you define how the system recognizes COBRA-qualifying events from employee personnel actions (infotype 0000) records. You do this by creating a link between the two.
The only COBRA-qualifying event types that you assign to personnel actions are:
Termination
Death of employee
Reduction in hours
You need to assign these COBRA-qualifying event types since they are based on customizable entries in your HR master data and therefore cannot be delivered as standard.
When the system collects COBRA-qualified beneficiaries, it considers employee records within the date range you specify in two stages as follows:
1. The system searches for employee personnel action (infotype 0000) records. The COBRA qualifying events assigned to any personnel actions found are collected.
2. The system checks other employee infotype records for specific information which corresponds to COBRA-qualifying event types
Assign COBRA Benefits IMG Path: Personnel Management COBRA Events to Personnel Actions
Notification and Payment Intervals:
In this step, you define details of COBRA administration for those states where state law concerning COBRA differs from federal law.
Federal regulations are reflected in the state settings for the District of Columbia, which is also the system default.
If you must comply with state regulations that differ from the federal regulations, you should create a new state entry. Otherwise, you can use the DC version for all employees, regardless of which state they reside in
Define Notification COBRA Benefits IMG Path: Personnel Management and Payment Intervals -
EBS R12.1.x HR Analytics - 7.9.6.1 [Benefits Dashboards]
In 7.9.6.1 (EBS R12.1.x), is there any benefits reports or Dashboards?
Looking at RPD I do not see any such subject area, when I look at the other industry tools, benefit suite of reports include as below. Does this imply that OBIA does not have that even in 7.9.6.1. Any idea if these data elements are in DW so that custom reports can be done? Any of these are standard EBS side Oracle Reports?
Benefits
► Accrual plans
► Employee eligibility
► COBRA premium payments and tracking
► Healthcare benefit assignments
► BeneficiariesI have now confirmed that 7.9.6.1 does not have "Benefits" related reports for HR.
Thanks -
I could really use some help here!
The medical practice I'm working with has been using Portfolios, of which I know very little.
I'll start over...they've gone ahead and converted all their medical charts to digital images (PDFs). Each chart is divided into sections, such as Patient Info, Progress Notes, Benefits, Treatment Plan and so forth. Every time a patient comes into the office for an appointment, a new page is added to certain parts of the chart (such as Progress Notes) detailing their last visit. Now that all the charts are electronic, this can be done on a computer. So, for a section like, say, Progress Notes, there's all the old charts organized with the most recent one on top. However, that's not the very first page-the very first page is a blank progress note, ready for the patient's next visit.
All they want to be able to do when they fill out a chart is, after it's saved, have it go on top of the chart (as it's now the most recent page) and have a new blank page appear, ready for the next visit. It's like inserting a blank page, but they don't want to do that-they simply want a new blank page to appear and move to the front on top of the most recent page.
Does this make sense? Help!Typically PDF documents are not used for updating a document. The editing is done in the original document, then it is converted to PDF.
There are only two ways I know to do this in Acrobat. One is to code a program to do it each time the file is opened. This would require someone with programming experience.
The other is to manually insert it by, either going to "Insert Page" command off the Document menu, you will need to choose a file or clipboard object to Insert. (You can choose a previously created 'blank page' PDF file, or you can insert clipboard. If it is empty, it will create a blank page)
You can also manually insert this way: open Pages tab to the left of the document, right-click on the last page, and click insert page.
Dj -
Suggest book on SAP HR Functional for beginners
Dear All,
Request you to suggest me a book for SAP HR Functional
for beginners.
Thanks in advance for the help.
Regards,
TaranjitBenefit Administration:
This section of the Implementation Guide (IMG) is where you set the SAP Benefits Administration component.
Here you enter in the system all the details of the benefit plans offered by your company.
Benefit Area:
Benefit areas allow you to have separate administration of different benefit plan pools. This division is primarily for administrational purposes and would not normally be used for eligibility
IMG Path: Personnel Management  Benefits  Basic Settings  Define Benefit Area
Assign Currency to Benefit Area:
In this step, you specify the currency for the benefit area
IMG Path: Personnel Management  Benefits  Basic Settings  Assign Currency
this step, you enter the providers of the benefit plans you offer.
This could be the Insurance company, or Health Maintenance Organization that receives the benefit plan costs
IMG Path: Personnel Management  Benefits  Basic Settings  Define Benefit Providers
In this step, you set relevant benefit area for your Customizing activities
If you have more than one benefit area to set up, you must set up each independently. After you have set up all the plans in one area, you must return to this view, set the next current benefit area and work through the IMG again, setting up the new benefit area.
IMG Path: Personnel Management  Benefits  Basic Settings  Set Current Benefit Area
Benefit Plan Types:
In this step, you enter the benefit plan types that you require for the plan categories predefined in the system.
The following plan categories are provided by MSD:
Health Plans
o Medical
o Dental
o Vision
Insurance Plans
o Basic Life
o Supplemental Life
o Accidental Death & Dismember
Savings Plans
o 403B
o 457
o PERS (Public Employees retirement Scheme for CP Benefit Plan) & TRS
(Teachers Retirement Scheme for TP Benefit Plan)
Flexible Spending Accounts
o Health care
o Dependent care
IMG Path: Personnel Management  Benefits  Basic Settings  Plan Attributes  Define Benefit Plan Types
Define Benefit Plan Status:
It is important that you assigning statuses in order to be able to control the availability of plans with a minimum of effort. For example, you can control whether or not employees can enroll in a plan simply by changing its status
IMG Path: Personnel Management  Benefits  Basic Settings  Plan Attributes  Define Benefit Plan Status
Benefit Plan Status:
In this step, you define parameter groups. You decide which groups you require in two stages:
1. You consider which costs, credits, coverage and employee and employer contributions for your plans vary according to the age, salary and/or seniority of employees (or possibly the age of the employee's spouse).
2. You determine the different ways in which you need to divide your employees according to different value ranges for these criteria.
It is not possible to define overlaps of ranges for a criterion within a single parameter group. Therefore, if you require different employee groupings for different plans, you need to create a separate parameter group.
For each unique combination of criteria and their values, you need to define a parameter group.
In this step, you simply create the parameter groups to which you assign groups for the individual criteria in the following steps. You later refer to the parameter groups, where applicable, in the individual rule variants for plans. Since one parameter group can be referenced by multiple plans, Customizing effort is kept to a minimum. In the plan variant, you also have the flexibility of being able to specify that you only want to use certain criteria values belonging to a parameter group, for example, age ranges
IMG Path: Personnel Management  Benefits  Basic Settings  Define Employee Groupings  Define Employee Criteria Groups  Define Parameter Groups
Age Groups:
In this step, you define the age groups for the parameter groups that you defined in a previous step.
Depending on your needs, you may find for some parameter groups, you can leave out this step, if for example there is no requirement to differentiate between employees based on age
IMG Path: Personnel Management  Benefits  Basic Settings  Define Employee Groupings  Define Employee Criteria Groups  Define Age Groups
Age Groups under Parameter grouping PAR1
Cost Groupings:
In the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, job classification, marital status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying costs for different groups of employees
IMG Path: Personnel Management  Benefits  Basic Settings  Define Employee Groupings  Define Cost Groupings
Coverage Groupings:
In the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, employment contract, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying coverage for different groups of employees
IMG Path: Personnel Management  Benefits  Basic Settings  Define Employee Groupings  Define Coverage Groupings
Employee Contribution Groupings:
In the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for different groups of employees
IMG Path: Personnel Management  Benefits  Basic Settings  Define Employee Groupings  Define Employee Contribution Groupings
the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for different groups of employees
IMG Path: Personnel Management  Benefits  Basic Settings  Define Employee Groupings  Define Employer Contribution Groupings
the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for different groups of employees
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Define Employer Contribution Groupings
the parameter group you could differentiate between employees based upon age, salary and seniority. Here you can further differentiate between employees, based on other employee criteria, such as geographical location, weekly hours, residence status and so on. Only set up this feature, if you find that the parameter group does not adequately cover your needs, when specifying employee contribution for different groups of employees
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Define Options for Health Plans
Dependent Coverage Options:
In this step, you define the dependent coverage that are used in health plans.
Define all possible variations that you need, because this view is not specific to any plan or plan option
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Define Dependent Coverage Options
Number of Dependents:
In this step, you can restrict participation in a health plan under a dependent coverage option to certain types of dependent, as determined by the subtypes of the Family/Related Persons infotype (0021). You can also define a minimum and maximum number of persons of a particular type that can be covered. During enrollment, the system only includes those dependent coverage options in the benefit offer for which the appropriate dependents are available
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Define Minimum and Maximum Number of Dependents
Define Cost Variants:
In this step you define cost variants to determine which factors influence the cost of a health plan for an employee. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual costs in this step. You simply define how costs vary according to:
Plan
Option
Dependent coverage
Employee data
Before you start to define cost variants, you need to do the following:
1. Determine how often costs vary for all the combinations of option and dependent coverage that you have defined in each plan.
This indicates how many cost variants you need. You can use the same cost variant more than once, for example, if costs are always identical for the dependent coverages 'employee only' and 'employee plus family' within a plan, regardless of the plan option
2. Determine how costs vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and cost grouping to determine cost. You can also indicate whether the gender of employees and whether or not they are smokers are cost criteria
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Define Cost Variants
Cost Rules:
You need to define costs for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Define Cost Rule
Health Plan Attributes:
In this step, you bring together all the definitions relevant to the health plan that you have made in the previous steps.
You assign to each health plan:
Its options
Relevant dependent coverages
The cost variants for the combination of options and dependent coverages
IMG Path: Personnel Management  Benefits  Plans  Health Plans  Assign Health Plan Attributes
Insurance Plans:
In this step, you define general data for insurance plans
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Define Insurance Plan General Data
Coverage Variants:
In this step, you define coverage variants to determined which factors influence the coverage an employee is entitled to in a plan. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual coverage in this step. You simply define how coverage varies according to:
Plan
Coverage option
Employee data
Before you start to define coverage variants, you need to do the following:
1. Determine how often coverage varies for different coverage options.
This indicates how many coverage variants you need. Note the following:
If a plan has set coverages (including salary multiples), you need a
coverage variant for each.
If a plan allows employees to choose any amount of coverage within a
range, you need only one coverage variant.
If a plan has options, you will need a coverage variant for each option.
2. Determine how coverage varies according to employee data.
This determines how you need to set up your variants using employee groupings. For each variant, you can specify a parameter group and coverage grouping to determine coverage
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans 
Coverage Rules:
In this step, you define the actual coverages for a plan.
You need to define coverage for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only.
Coverage can be defined as a flat amount or as a factor of salary
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Define Coverage Rules
Cost Variants:
In this step you define cost variants to determine which factors influence the cost of an insurance plan for an employee. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual costs in this step. You simply define how costs vary according to:
Plan
Coverage option
Employee data
Before you start to define cost variants, you need to do the following:
1. Determine how often cost varies for different coverage options:
If an insurance plan has set flat coverage options and flat costs, you need
to define a cost variant for each flat cost.
If you have set flat coverage options and the flat costs are directly
proportional to the coverage stated in the flat cost, you need only one
cost variant.
If an employee can choose any amount of coverage within a range and the
cost of the coverage is directly proportional to the coverage, you need
only one cost variant.
2. Determine how costs vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and cost grouping to determine cost. You can also indicate whether the gender of employees and whether or not they are smokers are cost criteria
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Define Cost Variants
Cost Rules:
You need to define costs for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Define Cost Rules
Insurance Plan Attributes:
In this step, you bring together all those parts of an insurance plan, that you have already defined in the previous few steps.
You define the insurance plan options, then associate to each insurance plan:
Cost variant
Coverage variant
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Assign Insurance Plan Attributes
Combined Coverage Limits:
When you define coverages for plans such as insurance, you can set limits on the coverage amount. This is often used when the coverage is an amount dynamically calculated when the employee chooses her coverage.
However these limits apply only to one plan and yet you might need to define limits which combine the coverages of more than one plan.
In this chapter, you define these combined limits as follows:
1. The limit that might span 2 or more plans is reduced to a mathematical equation, where there is an amount on one side and plan coverages on the other side. The two sides of this equation are then DIVIDED BETWEEN the two views in this chapter.
2. The first view defines the limit in monetary terms which is one side of the equation. It also defines the operator (equals, is greater than, and so on).
3. The second view defines the other side of the equation in terms of the plan coverages
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Combined Coverage  Combined Coverage
Combined Coverage Limit Expressions:
In this step, you enter the second half of the equation, as discussed in combined coverage
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Combined Coverage  Define Combined Coverage Limit Expressions
Imputed Income for Selected Benefits:
In this section of the IMG, you define the criteria needed to calculate Imputed Income.
Imputed Income is based upon benefits paid for by the employer and calculated using rates set by the Internal Revenue Service (IRS). This value is then treated as taxable income for the employee
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Combined Coverage  Review Age Groups for Imputed Income
Review Calculation Factors for Imputed Income:
In this step, you check that the Imputed Income Rate Table entries are correct.
The imputed income age groups are associated with the rates/factors set by the IRS
IMG Path: Personnel Management  Benefits  Plans  Insurance Plans  Combined Coverage  Review Calculation Factors for Imputed Income
Savings Plans:
In this step, you define general data for savings plans.
You have defined the relevant type, status, and provider for each plan in the Basic Settings section of the Benefits IMG
IMG Path: Personnel Management  Benefits  Plans  Savings Plans  Define Savings Plan General Data
Employee Contribution Variants:
In this step you define employee contribution variants to determine which factors influence the permitted employee contribution to a plan. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual contributions in this step. You simply define how contributions vary according to:
Plan
Option (only for plans in the plan category Miscellaneous)
Employee data
Before you start to define variants, you need to do the following:
1. Determine how often employee contributions vary for plans and any plan options.
This indicates how many contribution variants you need.
2. Determine how employee contributions vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and employee contribution grouping to determine employee contribution
IMG Path: Personnel Management  Benefits  Plans  Savings Plans  Define Employee Contribution Variants
Employee Contribution Rules:
In this step, you define the employee contribution limits for each plan.
You need to define employee contributions limits for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only.
You can define minimum and maximum employee contribution in the following ways:
As a fixed amount
As a percentage of salary
As a contribution unit
In Payroll, the total employee contribution is the sum of these amounts
IMG Path: Personnel Management  Benefits  Plans  Savings Plans  Define Employee Contribution Rules
Employer Contribution Variants:
In this step you define employer contribution variants to determine which factors influence the contribution the employer makes to a plan. Variants are plan-specific; each plan has its own variant(s).
You do not enter any actual contribution in this step. You only define how contributions vary according to:
Plan
Option (only for plans in the plan category Miscellaneous)
Employee data
Before you start to define variants, you need to do the following:
1. Determine how often employee contributions vary for plans and any plan options.
This indicates how many contribution variants you need.
2. Determine how employee contributions vary according to employee data.
This determines how you need to set up your variants using employee groupings.
For each variant, you can specify a parameter group and employer contribution grouping to determine employer contribution
IMG Path: Personnel Management  Benefits  Plans  Savings Plans  Define Employer Contribution Variants
Employer Contribution Rules:
In this step, you define limits for the contributions made by the employer to employee plans. You so this for each employer contribution variant for each plan.
You need to define employer contributions limits for each possible combination of employee grouping in the criteria you have attributed to each variant. If you have not specified any criteria in a variant, you assign one rule only.
You can define the employer contribution and the contribution limit in either of the following ways:
As a fixed amount / as an amount per unit contributed by the employee
As a percentage of employee base salary or employee contribution
IMG Path: Personnel Management  Benefits  Plans  Savings Plans  Define Employer Contribution Rules
Assign Savings Plan Attributes:
In this step, you complete the definition of savings plans by bringing together the relevant elements that you have already defined:
EE contribution variant
ER contribution variant
IMG Path: Personnel Management  Benefits  Plans  Savings Plans  Assign Savings Plan Attributes
Flexible Spending Accounts (FSAs):
In this step, you define general data for flexible spending accounts (FSAs).
Requirements
You have created the appropriate plan type , plan status, and benefit provider in the preceding steps
IMG Path: Personnel Management  Benefits  Plans  Flexible Spending Accounts (FSAs)  Define Spending Account General Data
Assign Spending Account Attributes:
In this step, you enter the details of your flexible spending accounts including contribution limits, an employer contribution variant (if required), and rules for the reimbursement of claims
IMG Path: Personnel Management  Benefits  Plans  Flexible Spending Accounts (FSAs)  Assign Spending Account Attributes
Flexible Administration:
In this chapter, you define the flexible aspects of your Benefits administration. You define the availability of plans to your employees, in terms of the plans themselves. You also define aspects of the enrollment process.
you enter parameters that apply to processing within an entire benefits area, including:
Open enrollment period dates
Default validity dates for adjustment/standard plan records
Advance availability of future plans
Dependent age limits
IMG Path: Personnel Management  Benefits  Flexible Administration  Define Administrative Parameters
Benefit Adjustment Groupings:
In this step, you define adjustment groupings. These groupings allow you to specify different adjustment permissions for different groups of employees
IMG Path: Personnel Management  Benefits  Flexible Administration  Benefits Adjustment Reasons  Define Benefit Adjustment Groupings
Benefit Adjustment Reasons:
In this step, you define adjustment reasons to control changes to employee enrollments according to company policy.
The adjustment reason types that you define here are assigned as subtypes of Adjustment Reasons records (infotype 0378) in HR Master Data. Since a record can only have one subtype, a new record must be created for every adjustment reason an employee experiences.
According to the adjustment concept, an employee can only make changes to her enrollments if she has an Adjustment Reasons record (infotype 0378) with the required adjustment reason as a subtype. The only exceptions to this are if changes are made during an open enrollment period or if an anytime adjustment reason is assigned to the plan type.
In addition to defining adjustment reasons for certain events that can trigger changes, you may also want to define a special adjustment reason to allow changes to plans at any time
IMG Path: Personnel Management  Benefits  Flexible Administration  Benefits Adjustment Reasons  Define Benefit Adjustment Reasons
Adjustment Permissions:
In this section, you assign adjustment permissions to each benefit plan type for an adjustment reason and any adjustment grouping that you have defined.
Note that the elements for which you can define permissions are automatically determined by the system, dependent on the plan category
Health Plans:
In this step, you define the changes permitted for all plans of this type. You do this for each combination of adjustment reason, adjustment grouping, and plan type
IMG Path: Personnel Management  Benefits  Flexible Administration  Benefits Adjustment Reasons  Define Adjustment Permissions  Health Plans
this step, you define the changes permitted for all plans of this type. You do this for each combination of adjustment reason, adjustment grouping, and plan type
IMG Path: Personnel Management  Benefits  Flexible Administration  Benefits Adjustment Reasons  Define Adjustment Permissions  Insurance Plans
Savings Plans:
In this step, you define the changes permitted for all plans of this type. You do this for each combination of adjustment reason, adjustment grouping, and plan type
IMG Path: Personnel Management  Benefits  Flexible Administration  Benefits Adjustment Reasons  Define Adjustment Permissions  Savings Plans
Spending Accounts:
In this step, you define the changes permitted for all plans of this type. You do this for each combination of adjustment reason, adjustment grouping, and plan type
IMG Path: Personnel Management  Benefits  Flexible Administration  Benefits Adjustment Reasons  Define Adjustment Permissions  Spending Account
Programs:
In this section of the IMG, you define benefit programs and the eligibility restrictions and termination conditions for the plans within these programs.
Within a program, eligibility for plans can be determined on two levels:
Program groupings control eligibility on a high level (macro-eligibility) by allocating an employee a defined program, depending on his/her organizational and employment data.
Eligibility rules are optional and control eligibility on a low level (micro-eligibility) by determining whether an employee can participate in a plan within the relevant program. An employee must fulfill the conditions defined in the rule in order to be able to enroll. Eligibility rules are assigned to plans in programs by means of an eligibility variant.
First Program Grouping:
In this step, you define first program groupings. Later, you define programs for a combination of first and second program groupings.
Identical attributes are available for the setup of both the first and second program groupings, and they are therefore interchangeable. The fact that you determine macro-eligibility for a program using two dimensions means that you are able to make finer distinctions between groups of employees
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Define First Program Grouping
Second Program Grouping:
In this step, you define second program groupings. Later, you define programs for a combination of first and second program groupings.
Identical attributes are available for the setup of both the first and second program groupings, and they are therefore interchangeable. The fact that you determine macro-eligibility for a program using two dimensions means that you are able to make finer distinctions between groups of employees
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Define Second Program Grouping
Employee Eligibility:
In this section of the IMG, you define the criteria according to which you control eligibility for individual benefit plans within a benefits program (definition of micro-eligibility). You perform the following steps to set up eligiblity requirements:
You define eligibility grouping to identify groups of employees for whom
certain eligibility criteria apply.
You create eligibility variants, which you later use to link eligibility
rules to programs.
If necessary, you define dynamic eligibility conditions relating
specifically to actual hours worked/length of service, or zip codes.
You bring your definitions together in the eligibility rule, where you
can also specify further conditions for enrollment.
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Employee Eligibility  Define Eligibility Groupings
Eligibility Variants:
In this step, you define eligibility variants. These consist simply of an identifier and a description
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Employee Eligibility  Define Eligibility Variants
Eligibility Rules:
In this step, you define eligibility rules for the benefit plans offered by your organization. You define these rules for combinations of eligibility grouping and eligibility variant, thereby determining the eligibility conditions that will apply for different groups of employees
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Employee Eligibility  Define Eligibility Rules
Participation Termination:
In this section of the implementation guide you define criteria for the termination of benefit plans
Termination Groupings:
In this section of the implementation guide you define criteria for the termination of benefit plans
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Participation Termination  Define Termination Groupings
Termination Variants:
In this step, you define termination variants. These consist simply of an identifier and a description
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Participation Termination  Define Termination Variants
Termination Rules:
In this step, you define termination rules. You define these rules for every combination of termination grouping and termination variant, thereby determining the coverage continuation periods and termination day that will apply for different groups of employees
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Participation Termination  Define Termination Rules
Define Benefit Programs:
In this step, you define termination rules. You define these rules for every combination of termination grouping and termination variant, thereby determining the coverage continuation periods and termination day that will apply for different groups of employees
IMG Path: Personnel Management  Benefits  Flexible Administration  Programs  Define Benefit Programs
Dependent/Beneficiary Eligibility:
In this step, you define family member groupings and determine how family members are allocated to these groupings
IMG Path: Personnel Management  Benefits  Flexible Administration  Dependent/Beneficiary Eligibility  Define Family Member Groupings
Dependent Eligibility Rule Variants:
In this step, you define the dependent eligibility variants to which you want to assign dependent eligibility rules. You also specify whether you wish to use a family member grouping in the associated eligibility rule to restrict eligibility to types of family members with certain characteristics
IMG Path: Personnel Management  Benefits  Flexible Administration  Dependent/Beneficiary Eligibility  Define Dependent Eligibility Rule Variants
Dependent Eligibility Rules:
In this step, you define dependent eligibility rules to determine which types of family member are eligible as dependents. You then assign your rules to the appropriate plans by means of a rule variant in the step Assign Eligibility Rule Variant to Plan
IMG Path: Personnel Management  Benefits  Flexible Administration  Dependent/Beneficiary Eligibility  Define Dependent Eligibility Rules
Beneficiary Eligibility Rule Variants:
In this step, you define the beneficiary eligibility variants to which you assign beneficiary eligibility rules in the next step. You also specify the following:
Whether you want to use a family member grouping in the associated eligibility rule to restrict eligibility to types of family members with certain characteristics
Whether the following apply for plans to which the variant is assigned:
 The employee can be a beneficiary
 Contingency beneficiaries can be named
 Spouse approval is required if beneficiaries other than the spouse are to be amed (the system only takes this setting into consideration for plans of the category avings)
IMG Path: Personnel Management  Benefits  Flexible Administration  Dependent/Beneficiary Eligibility  Define Beneficiary Eligibility Rule Variants
Beneficiary Eligibility Rules:
In this step, you define beneficiary eligibility rules to determine which types of family member are eligible as beneficiaries. You then assign your rules to the appropriate plans by means of a rule variant in the step Assign Eligibility Rule Variant to Plan
IMG Path: Personnel Management  Benefits  Flexible Administration  Dependent/Beneficiary Eligibility  Define Beneficiary Eligibility Rules
Assign Eligibility Rule Variant to Plan:
In this step, you assign dependent eligibility variants and beneficiary eligibility variants to plans, thereby assigning the eligibility rules associated with these variants
IMG Path: Personnel Management  Benefits  Flexible Administration  Dependent/Beneficiary Eligibility  Assign Eligibility Rule Variant to Plan
COBRA Plans:
In this step, you specify which health plans that you have already defined in the system are COBRA-relevant.
When a clerk collects COBRA-qualified beneficiaries, the system only considers employee enrollments in the plans you select here as legitimate cases where COBRA must be offered to the employee
IMG Path: Personnel Management  Benefits  COBRA  Choose COBRA Plans
this step, you determine for which flexible spending accounts (FSAs) you will offer continuation of coverage under COBRA. You need to do this for each benefit area separately
IMG Path: Personnel Management  Benefits  COBRA  Choose COBRA Spending Accounts
Qualifying Event Coverage Periods:
In this step, you define the events that qualify individuals for COBRA coverage, and the periods of permitted coverage continuation for each qualifying event type. COBRA legislation states the following regarding coverage continuation periods:
In the case of Termination of employment and Reduction in working hours, only 18 months coverage must be provided. If qualified beneficiaries are determined to be disabled within 60 days of the COBRA event, they are entitled to a further 11 months of coverage, as are the other qualified beneficiaries who experienced the original event.
For all other qualifying events except Bankruptcy of employer, a qualified beneficiary is entitled to 36 months continuation coverage, and there is no extension provision for disability.
In the case of the event Bankruptcy of employer, the coverage continuation period is the life of the retired employee or retired employee's widow/widower. You therefore do not need to define a continuation period in this case.
IMG Path: Personnel Management  Benefits  COBRA  Define Qualifying Event Coverage Periods
Assign COBRA Events to Personnel Actions:
In this step, you define how the system recognizes COBRA-qualifying events from employee personnel actions (infotype 0000) records. You do this by creating a link between the two.
The only COBRA-qualifying event types that you assign to personnel actions are:
Termination
Death of employee
Reduction in hours
You need to assign these COBRA-qualifying event types since they are based on customizable entries in your HR master data and therefore cannot be delivered as standard.
When the system collects COBRA-qualified beneficiaries, it considers employee records within the date range you specify in two stages as follows:
1. The system searches for employee personnel action (infotype 0000) records. The COBRA qualifying events assigned to any personnel actions found are collected.
2. The system checks other employee infotype records for specific information which corresponds to COBRA-qualifying event types
IMG Path: Personnel Management  Benefits  COBRA  Assign COBRA Events to Personnel Actions
Notification and Payment Intervals:
In this step, you define details of COBRA administration for those states where state law concerning COBRA differs from federal law.
Federal regulations are reflected in the state settings for the District of Columbia, which is also the system default.
If you must comply with state regulations that differ from the federal regulations, you should create a new state entry. Otherwise, you can use the DC version for all employees, regardless of which state they reside in
IMG Path: Personnel Management  Benefits  COBRA  Define Notification and Payment Intervals
heck this one and let me know if there is anything else even arun has also given nice response so if u have any query pls revert back
6 -
hi,
does anyone know if Adobe has a product that will append different file formats to a single PDF file when user does a bulk printing to the Adobe PDF instead of creating multiple PDFs and selecting the "from multiple files" to combine them which is not practical if we want to combine thousands of documents !Since we're on the subject of Portfolios, I suppose I might as well mention my situation-I did try posting this under a separate topic, but have had no responses thus far. The medical practice I'm working with has been using Portfolios, of which I know very little.
I'll start over...they've gone ahead and converted all their medical charts to digital images (PDFs). Each chart is divided into sections, such as Patient Info, Progress Notes, Benefits, Treatment Plan and so forth. Every time a patient comes into the office for an appointment, a new page is added to certain parts of the chart (such as Progress Notes) detailing their last visit. Now that all the charts are electronic, this can be done on a computer. So, for a section like, say, Progress Notes, there's all the old charts organized with the most recent one on top. However, that's not the very first page-the very first page is a blank progress note, ready for the patient's next visit.
All they want to be able to do when they fill out a chart is, after it's saved, have it go on top of the chart (as it's now the most recent page) and have a new blank page appear, ready for the next visit. It's like inserting a blank page, but they don't want to do that-they simply want a new blank page to appear and move to the front on top of the most recent page.
Does this make sense? I really could use some help ASAP! -
Can send texts in ireland but can't make or receive calls?
In I'm southern Ireland and I can't make any calls or get any but I can send messages. I have a s5 and have turned on roaming so I am at a loss as to what else to do. It currently says I am with Vodafone as a carrier. Any help please thanks in advance ☺
Did you activate roaming before going abroad?
Click on EE & ME and where it says My Account, click on Devices and Usage and enable it from there, cllick on EE & ME and where it says travel and shopping click on using phone abroad.
http://ee.co.uk/help/add-ons-benefits-and-plans/call-or-going-abroad/roaming---using-your-phone-abroad/using-4g-abroad
Maybe you are looking for
-
Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???
I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my
-
Can i turn off the touch screen on my laptop?
can someone exolain how if im able to? Toshiba satellite l55dt-a5254
-
Pricing: header condition with condition value formula
Hi, can anyone helps us on the following topic: - is it possible to enter a conditon value formula for a header condition? We have created a formula, but it is only executed when we enter the condition on item level. Our condition settings are: Cond.
-
Hi response.setHeader("Expires","-1"); response.setHeader("Cache-Control","no-store, no-cache"); response.setHeader("Pragma","no-cache");So many times i heard about the above lines. But I cannot understand the meaning of these lines correctly. Can an
-
IPTC information - export in greyscale
The photo information isn't shown anymore in the exported JPGs in the IPTC since LR4, but it still functions in the TIFF format. Is there a possibility to fix this error? I work with Mac OS X Version 10.7.5 - Lion - LR 5 Is there a possibility to exp