Best practice for constructing an editable, saveable form?

We're entirely new to LiveCycle here, but we're looking to create a document for one purpose: To allow a user to edit their details into the form, email/send ourselves the completed form, and (for legal reasons), leave a fully saved copy of the form with the user.
It is imperative that the user is left with a copy of the document in its entireity. Can this be dnoe with LiveCycle? Or with the aid of Managed Services?
Many thanks,
Jordan

Yes it can be done .....I assume that the user is or may be using Reader to fill th eform ...if so you will have to Reader Extend the form to allow Reader to do the local save. Or ...your process can email back a copy of the form if you do not want to Reader Extend. If you go th elocal save route the onus is on the user to hit a save button or do a File Save .....you cannot write to their local harddrive automatically (for security reasons).
Hope that helps
Paul

Similar Messages

Best Practices for BI, ADF and Oracle Forms installations on Weblogic

Hi, I'm researching options on upgrading to Oracle 11g Middleware. My company currently has Oracle Forms 10g running on Oracle Application Server.
We are interested in using Oracle Forms 11g, ADF and Jdeveloper, and Business Intelligence with Oracle's Weblogic 10.3.5.
Is there any whitepapers or documentation on best practices for installing alll of these components together?
For instance, can ADF ( with JSF 2.x ) be installed in the same domain as Oracle Forms 11g but use different managed servers?
Will Business Intelligence need to be in a seperate Oracle Home with it's own weblogic installation? I spend a lot of time trying to get the JSF upgraded to 2.x in the Business Intelligence installation and could not get it to work.
I know it's a pretty broad question but thank you for any direction on this.

Thanx for the reply! I read through the documents and they are very good at explaining how to install the different components individually. I still can't find much on installing them together. I hope it's not just going to be a trial and error thing.
So far I've installed done the following successfully:
Installed 10.3.5 weblogic
Forms and Reports 11g on top of 10.3.5
I've created an additional managed server for our ADF applications.
My next step is upgrading the JSF to 2.x. I would have to stage patches 12917525 and 12979653. I'm afraid it will break the forms and reports though. Any ideas?

Best practice for backing up and restoring forms

Greetings, I would like to pose a question to the forum and understand how many of you, if at all, "backup" your interactive forms so that in the event one or multple become corrupt, you have a method to recover the forms.
We recently experienced such a scenario in which the forms we developed in ABAP, and access through our portal, had become corrupt. What would happen to us when we attempted to access the form via the portal would be a SOAP error. SOAP errors, I understand, can happen for various reasons but prior to the incident, our forms were working just fine. We attempted to retrace our steps to identify the cause of the problem but found we could not replicate the issue. Through analysis of the forms, we identified the corruption in the master page and found that if we copied the sections of the form that were not corrupt to a new master page, the form would work properly again. Our thought is that this can not be the only method to recover from an incident like this and would like to know if others have experienced or have practices in place that would minimize the impact.
We asked SAP support whether or not there was a method to back up Interactive forms and the simple answer we received was to download the XML file from txn SFP. Can others relate to this strategy as a proper "backup" method or do other best practices exist that would be more ideal??
Thank you in advance!

I had many difficulties with this kind of errors like 2 years ago. Of course it was getting better with every patch level, and with LCD 8, LCD 8.1 etc.I don´t have any problems with the newest solution, but remember the feelings. I had to throw away a three days work once because of this "errors". But the solution is easy:
- use the versioning like you do in your ABAP development, that works ok
- if you would like to have an extra backup, copy the form into a backup, I mean with name like Z_YOURNAME_BCK_1
- if you still feel that is not enough, you can always set your forms to be dynamic, what makes the ADS webservice to change the way the forms are constructed (now it will have a internal structure, you can check this out, if you open a dynamic form in LCD outside SAP, it works like a charm, if you open just a printform, it asks for an import, which does not have anything in common with the template earlier). And you can backup every form you generate with these settings. If a problem appears, you can always open this outside SAP in LCD, copy the hierarchy and paste it into your SAP window with LCD development.
Hope that helps.
Regards Otto

SAP best Practice for Construction industry in GCC countries

Dear Pals
Pleas let me now the link for the SAP Best Practice document for Construction industry in GCC countries.
Thanks & regards
Rajaram

Hi,
Try the link gien below:
http://help.sap.com/bp_bl603/BL_AE/html/index.htm
Regards,
Amit

Best Practices for Professional video editing

Hi
I'd like to know your thoughts on what the most proffessional / effeciant method for editing are. At the moment, I archive all the footage from a DV tape through iMovie (I just find iMovie easier for doing this) save / archive all the imported segments of clips I need, name them, then import them into FCP
When I finish an edit I export and uncompressed Quicktime movie, then back up the entire project on an external drive
Is this good practise, Should I export the final edit to tape?
I've just started out as a video-maker as a paid proffession and I'd like to know the most 'by the book' methods
THanks
G5 Dual Mac OS X (10.4.8)

Sounds to me that you're doing a whole lot of extra steps using i-movie as your import. You're going to lose some of FCP best media features by not digitizing with FCP. Batch Capture in FCP isn't hard to learn.
I wouldn't say there's any "rulebook" for professional editors. We all work a little differently but here are some of my "best practices"
Always clearly name and label all of the tapes that you are using in a fashion that makes sense to you. When I cut a large project I may have multiple tapes. If I lose a piece of media accidentally, it's easier to go back and re-digitize if I have organized the project early in.
Clearly label bins and use them wisely. For example, on a small project I might have a "video" bin, a "music" bin and a "graphics" bin. This saves searching through one large bin.
On larger projects, I try to think ahead to how I will edit and make bins accordingly. For example I might have bins as follows, interviews, b-roll location a, b-roll location b and so on. Then I'll have music bins, animation bins and still graphic bins. I generally try to save all to one hard drive which saves me looking through three or four drives. This isn't always possible depending upon the size of the project.
As for back-up. Lots of peope buy harddrives for each project and then store them until they need them next. Of course, keep all of your raw-footage and you can always re-digitize.
When I'm done with a project I save the completed project to tape...this is for dubs and library. I save the FCP information on a DVD and I burn the media from the drive, because I can't afford multiple hard drives. I would rather re-digitize my raw if I need to re-do the project in the future.
That's how I do it, but other editors have other methods. I would highly suggest digitizing in FCP and not i-movie, but that's entirely up to you. You're not doing anything "wrong."
G4 Dual Processor Mac OS X (10.4.1)
G4 Dual Processor Mac OS X (10.4.1)

What is best practice for multi camera edit with differing lengths?

I have three cameras that took video of an engagement party. Camera A and B took it all (with some early extra material exclusive to each camera). Camera C took some, then stopped, then took more.
So I have four sets of clips - A and B which are complete, then C then D.
Should I create sequence 1 with A, B and C synchonised, then create sequence 2 with A, B and D synchronised, then sequence 3 with sundry early non-multi camera clips, plus sequence 1 plus sequence 2 then late non-multi camera clips?
Or can I synchronise A, B and C, then on the same timeline synchronise A, B and D? I'm concerned that the second synchronisation will put C out of sync.
What is the best way to approach this?
Thanks in advance.

A and B which are complete, then C then D.
I think you're looking at this in the wrong way. You have only three cameras, A, B and C, but you don't really have a D camera, as those are just other clips from camera C. You might call them C1 and C2 if you like, but calling them D seems to be confusing the issue, as it's still only three cameras, and three shots to choose from when cutting the sequence. (Except for the gap between C clips, where you will have only the A and B shots to choose.)
You can absolutely sync all the clips form camera C on the same sequence as A and B. And it will probably be easier to do so.

Best practice for making database connection to Forms 10 apps?

Hi
To upgrade our Forms applications we are moving from version 3 to 10.
Our old system runs Forms applications and the connection to the database is based on the individual user. This means that any tables or views used require that the user has specific access granted to them. We have a bespoke system to manage this which generates scripts (GRANT statements) based on lists of tables and users and their appropriate access.
I have concerns that managing the table access for thousands of individual users in the Forms 10 environment is going to be technically difficult, especially with RADs to consider. Is it feasible to generate and frequently refresh RAD scripts to maintain the current list of users and their permissions?
I am trying to decide if it is better to:
A) Connect with the same database user (such as "APP_USER") which has access to everything
or
B) Connect with individual usernames/passwords
Currently, the individual user database passwords are generated weekly and users have means to obtain them (once signed in) rather than setting and remembering them. Some views refer to the Oracle system parameter "USER" to decide what data is returned so this functionality would need to be preserved.
Any help is greatly appreciated, especially if you can tell me if option A or B is how you connect at your site.

Thanks for the advice so far.
It would appear that connecting with individual usernames is not a fundamental error, which I was concerned about.
Will it still be necessary to create and refresh RAD scripts, or is this only an issue when using OID? We have OID here already because we have a website using Oracle Portal. The sign-on process for this connects to Active Directory for authentication.
I do not like the idea of having to schedule a refresh of RAD scripts, perhaps 3 times a day, just to keep it current. I do not think the RADs are expected to change as frequently as this, but perhaps other forum members have experience of this?

Best Practice for PDF print forms based on SAP standard

Hi,
I have copied the SAP standard PDF form F_D_INT_SCALE_00 to a Z form, and am using it in conjunction with the standard print program RFDZIS01_PDF. However I need to output some additional fields that are not supplied by the print program / interface (for example Customer VAT number).
What is the best practice for achieving this? As far as I can see the only way is to take a copy of the standard print program and modify it to select the extra data, and modify the interface. I never like taking copies of standard programs though for obvious reasons.
If I had this requirement with a smartform it would be a simple case of embedding ABAP code into the Z smartform and leaving the print program alone, but unfortunately there is no provision for the non-PDF version of the Interest Letter to be sent by email.
Thanks in advance,
Vindaloo

Thanks for your reply Robert.
However I think you are referring to Smartforms when you mention Code Initialization and Global Data declarations. I need to know the best way to modify copies of standard Adobe Print Forms.
Regards,
Vindaloo

SAP Best practice for Material request form

Hai Sap gurus,
Do we have any sap best practice for material request form? If so please help me to find this best practice provided by the SAP. I searched through sap help but i was unable to find one.
Same way i also need to find the sap best practice for Change request form too...
Thanking you all in advance.

Hi,
Check these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2b50ac90-0201-0010-d597-8d833833f9e0
and using the service market place link to down load the best practices
http://www.sap.com/services/bysubject/servsuptech/index.epx

Best practices for deploying forms in a 'cluster'?

Anyone know of any public docs that discuss typical best practices for
- forms deployment;
- forms apps management and version control; and/or
- deploying (and keeping) the .frm/frx in sync when using multiple forms servers in a HA or load balancing envrionment?

Hi adil,
Based on your description, you want to know the best practices for search service in a SharePoint farm.
Different farms have different search topologies, for the best search performance, I recommend that you follow the guidance for small, medium, and large farms.
The article is about the guidance for different farms.
Search service can run with other services in the same server, if condition permits and you want to have better performance for search service and other services including BI performance, you can deploy search service in dedicated server.
If condition permits, I recommend combining a query component with a front-end Web server to avoid putting crawl components and query components on the same serve.
In your SharePoint farm, you can deploy the query components in a WFE server and the crawl components in an application server.
The articles below describe the best practices for enterprise search.
https://technet.microsoft.com/en-us/library/cc850696(v=office.14).aspx
https://technet.microsoft.com/en-us/library/cc560988(v=office.14).aspx
Best regards
Sara Fan
TechNet Community Support

Best practices for setting up projects

We recently adopted using Captivate for our WBT modules.
As a former Flash and Director user, I can say it’s
fast and does some great things. Doesn’t play so nice with
others on different occasions, but I’m learning. This forum
has been a great source for search and read on specific topics.
I’m trying to understand best practices for using this
product. We’ve had some problems with file size and
incorporating audio and video into our projects. Fortunately, the
forum has helped a lot with that. What I haven’t found a lot
of information on is good or better ways to set up individual
files, use multiple files and publish projects. We’ve decided
to go the route of putting standalones on our Intranet. My gut says
yuck, but for our situation I have yet to find a better way.
My question for discussion, then is: what are some best
practices for setting up individual files, using multiple files and
publishing projects? Any references or input on this would be
appreciated.

Hi,
Here are some of my suggestions:
1) Set up a style guide for all your standard slides. Eg.
Title slide, Index slide, chapter slide, end slide, screen capture,
non-screen capture, quizzes etc. This makes life a lot easier.
2) Create your own buttons and captions. The standard ones
are pretty ordinary, and it's hard to get a slick looking style
happening with the standard captions. They are pretty easy to
create (search for add print button to learn how to create
buttons). There should instructions on how to customise captions
somewhere on this forum. Customising means that you can also use
words, symbols, colours unique to your organisation.
3) Google elearning providers. Most use captivate and will
allow you to open samples or temporarily view selected modules.
This will give you great insight on what not to do and some good
ideas on what works well.
4) Timings: Using the above research, I got others to
complete the sample modules to get a feel for timings. The results
were clear, 10 mins good, 15 mins okay, 20 mins kind of okay, 30
mins bad, bad, bad. It's truly better to have a learner complete
2-3 short modules in 30 mins than one big monster. The other
benefit is that shorter files equal smaller size.
5) Narration: It's best to narrate each slide individually
(particularly for screen capture slides). You are more likely to
get it right on the first take, it's easier to edit and you don't
have to re-record the whole thing if you need to update it in
future. To get a slicker effect, use at least two voices: one male,
one female and use slightly different accents.
6) Screen capture slides: If you are recording filling out
long window based databse pages where the compulsory fields are
marked (eg. with a red asterisk) - you don't need to show how to
fill out every field. It's much easier for the learner (and you) to
show how to fill out the first few fields, then fade the screen
capture out, fade the end of the form in with the instructions on
what to do next. This will reduce your file size. In one of my
forms, this meant the removal of about 18 slides!
7) Auto captions: they are verbose (eg. 'Click on Print
Button' instead of 'Click Print'; 'Select the Print Preview item'
instead of 'Select Print Preview'). You have to edit them.
8) PC training syntax: Buttons and hyperlinks should normally
be 'click'; selections from drop down boxes or file lists are
normally 'select': Captivate sometimes mixes them up. Instructions
should always be written in the correct order: eg. Good: Click
'File', Select 'Print Preview'; Bad: Select 'Print Preview' from
the 'File Menu'. Button names, hyperlinks, selections are normally
written in bold
9) Instruction syntax: should always be written in an active
voice: eg. 'Click Options to open the printer menu' instead of
'When the Options button is clicked on, the printer menu will open'
10) Break all modules into chapters. Frame each chapter with
a chapter slide. It's also a good idea to show the Index page
before each chapter slide with a progress indicator (I use an
animated arrow to flash next to the name of the next chapter), I
use a start button rather a 'next' button for the start of each
chapter. You should always have a module overview with the purpose
of the course and a summary slide which states what was covered and
they have complete the module.
11) Put a transparent click button somewhere on each slide.
Set the properties of the click box to take the learner back to the
start of the current chapter by pressing F2. This allows them to
jump back to the start of their chapter at any time. You can also
do a similar thing on the index pages which jumps them to another
chapter.
12) Recording video capture: best to do it at normal speed
and be concious of where your mouse is. Minimise your clicks. Most
people (until they start working with captivate) are sloppy with
their mouse and you end up with lots of unnecessarily slides that
you have to delete out. The speed will default to how you recorded
it and this will reduce the amount of time you spend on changing
timings.
13) Captions: My rule of thumb is minimum of 4 seconds - and
longer depending on the amount of words. Eg. Click 'Print Preview'
is 4 seconds, a paragraph is longer. If you creating knowledge
based modules, make the timing long (eg. 2-3 minutes) and put in a
next button so that the learner can click when they are ready.
Also, narration means the slides will normally be slightly longer.
14) Be creative: Capitvate is desk bound. There are some
learners that just don't respond no matter how interactive
Captivate can be. Incorporate non-captivate and desk free
activities. Eg. As part of our OHS module, there is an activity
where the learner has to print off the floor plan, and then wander
around the floor marking on th emap key items such as: fire exits;
first aid kit, broom and mop cupboard, stationary cupboard, etc.
Good luck!

HTML and CSS Best Practices for Eloqua?

Hello Topliners Community,
My name is Ben and I am a Web Designer. I am currently looking for any guidance on HTML and CSS best practices when working with Eloqua. I am interested in the best practices for e-mail and landing pages.
Thank you,
Ben

Personally I like to upload my custom created html/css into Eloqua instead of using the WYSIWYG.
But if you must then right clicking on text boxes and click edit source is the way to go.
There was a good discussion on editing your forms with CSS:
Energize Your Eloqua10 Forms with CSS
created by Ryan Wheler on Nov 2, 2012 8:44 AM, last modified by Greg Stotler on Sep 19, 2013 2:00 PM
Version 2
CSS can be used to heavily customize the layout of forms in Eloqua10. In this article we will provide sample cover some common formatting use cases on Eloqua10 Landing Pages. Further details about uses of CSS in Eloqua10 form templates can be found here: EE12 - Do It - Eloqua - Energize E10 Forms
Eloqua10 Forms HTML Structure
Below is an outline of the structure of the HTML generated by Eloqua when a form is added to a landing page. By targeting the HTML classes highlighted below, we can control the layout of any form on your landing page.
For the rest of page: http://topliners.eloqua.com/docs/DOC-3015

Best Practice for Servlets

I guess I'm asking for most peoples' input on what I'm planning to do here ....
Here's what I want to do, and know a bit about.
o I want to make a servlet that serves only XML.
o After that, I want to transform the XML into web pages, RSS feeds etc.. using XSLT.
Here's what I'm not so sure about...
o How should I implement the interface to the web-based aspects? Should the servlet be coded to display HTML pages on "GET" requests? Or should I use a pile of HTML files to make forms?
o What do I use to perform the XSLT transformations? Where should the set of solutions be placed relative to my servlet? Would a user then access this solution rather than the servlet itself?
o How do I code the servlet on one machine, and then test it on another without breaking the libraries? How do I set up any libraries I might have to use (like for XSLT transformations) on the server?
Any other advice here? I'm sure this is done often, but I can't find a resource that explains the best practices for it all.
I know this sounds like a lot of stupid questions. I've had lots of programs working with Java before, but I'm at a loss as to how I'm supposed to package libraries I use in my programs - moreso with a servlet. To make matters worse, I plan on using MySQL as the database.
If there's some wizard on the forums here who's willing to say more than just "RTFM" (of which there is none to answer my questions together as one), I'd be very very happy ":^)

Let me re-pose my question so as to be specific
enough to not be picked apart in my answer.
I want to FIRST AND FOREMOST, create a servlet that
serves up XML based on parameters given to it (how?
who cares.).What does "serves up XML" mean?
Let's be precise. Do you intend the servlet to send the XML back to the client? Or is the XML an intermediate step in your processing? (Yes, it matters.)
Then, I want to create interfaces (HTML, RSS,
boogledeedoo) to this XML data by having either JSP,
another servlet or insert something else here,
transform the XML into whatever the desired format
is."interface" is a loaded term in Java. What do you mean by it?
>
My assumption is that I'll make the servlet that is
capable of outputting my desired XML data and then
create another servlet that will poke it for data as
needed to transform the XML into HTML. This servlet
would also likely serve as the web site itself and
would manage user logins etc...(persistance yaddy
yadda)You're not thinking about this properly.
"yadda yadda" == muddled thinking.
My other assumption is that I'll make another servlet
that will poke the XML servlet and transform that
into RSS or anything else I can dream up.How does "poke the XML servlet" fit into the request/response protocol that is HTTP? Please explain.
-=-!REASONING!-=-
Previously, when I was working with PHP, I liked to
make scripts that would display interfaces and post
to themselves. OK, now I see. "interface" == GUI in a browser to you. Very good.
You can create a JSP that is an interface. You can have that JSP submit the HTTP POST or GET request to itself. No problem there, as long as "itself" knows what to do with the request.
It was a nice way of creating a
complete little package. Everything for one function
was encapsulated nicely under one roof. No excessive
HTML files all over the place to nurture.A simple problem, a simple solution. You can do that with a JSP.
Look. Part of my inability to describe this well is
because I DO feel like I'm in a lot of directions at
once. Or you don't understand the technology very well.
But I have to be in order to pull together
some sort of plan for myself. I understand many
concepts and have just finished studying object
oriented design etc..."Just finished"? How long did it take?
I know things about how Tomcat does connection
pooling for SQL connections.Great. Not much to understand there. It's harder to figure out how to do n-tier apps with more than one page well.
I do know how to use Google, probably a lot better
than most. But rest assured, I've yet to find a
little guide as complete as any of the "LAMP" books
there are out there. Which by the way, I have never
purchased.That's because Java Enterprise Edition isn't intended for little problems. LAMP is. Maybe the limitation is that you are used to "little" problems and not bigger ones.
If JEE seems scattered and complex, it's because it is. It encompasses more than LAMP.
I'm confident in good guidance, and not a heartfelt
smackdown. I'm still waiting for some clear suggestions.I gave you one, you just didn't know it: go read about Spring.
http://www.springframework.org
It'll help you structure complex apps from the user interface to the database in the back.
You're welcome.
%

Best Practices for Accessing the Configuration data Modelled as XML File in

Hi,
I refer the couple of blof posts/Forum threads on How to model and access the Configuration data as XML inside OSB.
One of the easiest and way is to
Re: OSB: What is best practice for reading configuration information
Another could be
Uploading XML data as .xq file (Creating .xq file copy paste all the Configuration as XML )
I need expert answers for following.
1] I have .xsd file which is representing the Configuration data. Structure of XSD is
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue</Config>
<FrameworkConfig>
2] As my project will move from one env to another the property-value will change according to the Environment...
For Dev:
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Dev</Config>
<FrameworkConfig>
For Stage :
<FrameworkConfig>
<Config type="common" key="someKey">proprtyvalue_Stage</Config>
<FrameworkConfig>
3] Let say I create the following Folder structure to store the Configuration file specific for dev/stage/prod instance
OSB Project Folder
|
|---Dev
|
|--Dev_Config_file.xml
|
|---Stage
|
|--Stahe_Config_file.xml
|
|---Prod
|
|-Prod_Config_file.xml
4] I need a way to load these property file as xml element/variable inside OSb message flow.?? I can't use XPath function fn:doc("URL") coz I don't know exact path of XMl on deployed server.
5] Also I need to lookup/model the value which will specify the current server type(Dev/Stage/prod) on which OSB MF is running. Let say any construct which will act as a Global configuration and can be acccessible inside the OSb message flow. If I get the vaalue for the Global variable as Dev means I will load the xml config file under the Dev Directory @runtime containing key value pair for Dev environment.
6] This Re: OSB: What is best practice for reading configuration information
suggest the designing of the web application which will serve the xml file over the http protocol and getting the contents into variable (which in turn can be used in OSB message flow). Can we address this problem without creating the extra Project and adding the Dependencies? I read configuration file approach too..but the sample configuration file doesn't show entry of .xml file as resources
Hope I am clear...I really appreciate your comments and suggestion..
Sushil
Edited by: Sushil Deshpande on Jan 24, 2011 10:56 AM

If you can enforce some sort of naming convention for the transport endpoint for this proxy service across the environments, where the environment name is part of the endpoint you may able to retrieve it from $inbound in the message pipeline.
eg. http://osb_host/service/prod/service1 ==> Prod and http://osb_host/service/prod/service2 ==> stage , then i think $inbound/ctx:transport/ctx:uri can give you /service/prod/service1 or /service/stage/service1 and applying appropriate xpath functions you will be able to extract the environment name.
Chk this link for details on $inbound/ctx:transport : http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/context.html#wp1080822

SAP HCM Implementation: Best Practice for configuring

Hi,
This is my first independent project of HCM implementation. I have just started the system configuration. Done with setting up the PA, PSA, EG and ESG. Assigned to CC. At this stage, I have a very basic question which is, what is the best practice for the next steps of configuration. What do I go to next, step up the OM in the SAP EasyAccess Menu? How should I go from here?
Would really appreciate some explanatory assistance.
Thanks in advance.
Papri
Edited by: papri_rc on Jul 8, 2011 6:40 AM

Its all depends on business requirement
at starting as i advised you review your BBP , make sure you configure everything
for your reference iam giving the following data for OM and PA config..
as part of OM
1.     depict client org structure using simple maintenance , with this you can create large structures in less time(while doing org structure be careful and refer BBP)
2.     maintain integration switches
3.     maintain plan version
4.     maintain number ranges
Configuration for PA
HR Enterprise /PersonnelStructure
u2022     Personnel Areas
u2022     Personnel Sub Areas
u2022     Employee Group
u2022     Employee Sub Group
u2022     Assignment of Personnel Area to Company Code
u2022     Assignment of Employee Sub Group to Employee Group
Basic Settings
1.     Maintain Number Range Intervals for Personnel Numbers
2.     Determine defaults for number ranges
Personal Data
1.     Create Forms of Address
2.     Create Marital Status
Family
1.     Defined Possible Family Members
Addresses
1.     Create Address Type
Communication
1.     Create Communication Types
Contractual and Corporate Agreements
1.     Define Contract Types
2.     Determine periods of notice
Employee Qualifications
1.     Create education establishment types
2.     Define Education Training
3.     Create educational Certificates
4.     Create branches of study
5.     Determine permissible certificates for education type
Infotype Menus
1.     User Group Dependency on Menus and Info groups
2.     Infotype Menu
3.     Determine choice of Infotype menus
4.     Infotype Menus
Actions
1.     User Group Dependency on Menus and Infogroups
2.     Info Group
3.     Personnel Action Types
4.     Create reasons for personnel actions
5.     Change Action Menu
*Developments(ABAPconsultant will do)     *Field Enhancements     (any field enhancements in infotypes)
Customer Infotypes     -Develop any customer infotypes if required for the business from 9000 series
Edited by: Piscian . on Jul 8, 2011 9:08 AM

Best practice for constructing an editable, saveable form?

Similar Messages

Maybe you are looking for