Need to create a report: all materials in one storage location incl. value

Hello,
we have the requirement to create a report: all materials in one storage location incl. value.
What are the database-tables we need to use in the report?
Is there a standard transaction which shows all materials on one storage location?
Thanks a lot.
Kind regards
Manfred

Hello,
MB52 is ok - but not good performance.
What are the important tables we need to join in an own report?
Kind regards
Manfred

Similar Messages

  • Move all materials in a storage location to another storage location

    Hi,
    is there in SAP a trx which moves automatically materials from a storage location to another storage location ?
    Regards

    is there in SAP a trx which moves automatically materials from a storage location to another storage location ?
    There is no t code for  automatic goods movement.
    Have to do manually with t code: MB1B or LSMW

  • Has anyone picked materials from one storage location but confirmed TO to different storage location?

    The business does not want to use MRP areas to segregate materials between service part and production. What they want to do is separate service parts on deliveries at our shipping storage types (915/916) from MRP view. This requirement is primarily for our international shipping area. We may pick parts for an international shipment and the parts will sit on the delivery - not goods issued because we don't want to invoice - for up to 3 months. During that time, MRP sees the inventory so replenishment is not done in a timely fashion or parts may get stolen from the shipment for a production requirement because the inventory is seen.
    Could one solution be to create a non-MRP relevant storage location (say 1200) and place the shipping storage types in this storage location?  Then when the transfer order creates, the system would show the source to be from the MRP relevant SLoc (1100), stype (130), bin (A-01-A), - these are examples - with the destination to be to non-MRP relevant SLoc 1200, stype 915, bin (dynamic using the delivery number) 0080745298? Has anyone had this type of request or know of a way to satisfy the business requirements without different MRP areas? They also do not want to have two transfer orders - one with a 601 movement and one with a 311 movement.
    Any known solutions or outside-the-box thinking would greatly appreciated.
    Marla

    I don't have the solution, just some critical questions and hints
    Even a non-MRP relevant storage location can be warehouse managed.
    The stock is shown in any stock list as long it is not goods issued, no matter if it is stored in a
    non-MRP relevant storage location.
    Stock that is picked for a delivery is not available for others, it is reserved. A delivery is a MRP element and hence should be taken into consideration in the planning run.
    A non-MRP relevant storage location will only solve your planning issues if you move the material there if it is not yet picked  and allocated to a delivery.
    Do your thieves really use SAP to check if the stock is there, or do they just see the stock in the warehouse? As said, the non-MRP relevant storage location will not solve this issue since the stock is still visible.

  • I Need to Create a report for batch jobs Based on Subject Area.

    Hi SAP Guru's,
    I need to create a report , that it must show the status of batch jobs Completion Times based on Subject area(SD,MM,FI).
    Please help me in this issue ASAP.
    Thanks in Advance.
    Krishna.

    You may need to activate some additional business content if not already installed but there are a lot BI statistics you can report on. Have a look at this:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/f9bd5b0d40537de10000000a1553f6/frameset.htm

  • Need to create alv report to show pan card number.

    Hi,
    I need to create alv report to show employee and vendor  name , number ,  Pan card number .This is for hr module.
    could any one tell me table and fields for this and how I can relate them with foriegn and primary key.
    Regards,
    Moderator Message: Do your own work
    Edited by: kishan P on Oct 5, 2010 10:38 AM

    Yes, but it only has one generic Date column, no start date and end date. I can't use that twice in the prompt. Although I can specify it to be 'between', but I'm not sure I can pass values to both variables like that.
    Currently I have used Campaign Start Date and Campaign End Date to enter values in calender format to the variables.

  • How to transfer all materials from one plant to other plants?

    How to transfer all materials from one plant to other plants?

    Hi
    To transfer stock in one step  between plants belonging to same company code use movement type "301" and using transaction code "MIGO". IF you like in two step it helps to monitor stock in transit use movement type "303" and "305".
    303 Transfer posting plant to plant in two steps - removal from storage
    305 Transfer posting plant to plant in two steps - placement in storage
    to transfer stock between plants of diffrent company code go for stock transpor order using tcode "me21n"
    hope it helps

  • All quantity base on storage location.... 4 questions...

    hi experts,
    i want to write a report which can show all the quantitiy base on storage location and i have four questions ....
    1 . has somebody can tell me where i can find the confirmed qty ? is it in VBEP-BMENG ?
    2 . how to know one material in one storage location's available quantity and confirmed quantity and received quantity ?
    3 . has somebody can tell me where i can find the soft commit & hard commit qty fields ?
    4 . is the field in table MARD named UMLME[Stock in transfer (from one storage location to another)] for transfer in or out ?
    Many thanks !
    Carlos Zhang

    everything you can do it thro' query.SVQ1.please search in this forum.you will get more detail on query.here you can link 2/3 tables and make your own report.
    regards
    venkadesh

  • Storage location wise value in Report

    Hi all ,
    We are working of MM module on which we have scenario in report,
                       Plant     Storage location  stock       value   ( 10 rs each quant)
         A      A1                     10             0
                   A2                         20                 0
                        A3                      30                 0
    Total                                                     60         600
    So according to this we are not getting storagelocation wise value....
    we applied the note 589024 also ...so we are geeting the storage location wise value but that values are not matching with ECC(mb5b),....
    our next scenario is we are comparing previous months closing stock value to present months opening stock value ...but its coming different after applying the note 589024.
    Please guide us.

    hi,
    Could you check the stock value with MMBE tcode and see if it matches.
    regards,
    Arvind.

  • Need Inspection lot creation at only one storage location level - QA07

    Hi,
    I have shelf life expired material at different storage location. When ever i run QA07.System generates inspection lot for all storage location.But I want to process the inspection lot for only one storage location. Please guide me how can we map this reqmnt.
    Thanks in advance for your relevent response.
    Thanks & Regards
    Kundan Kumar

    Hi,
    Next inspection date is maintained at the batch level, not at the storage location level.
    You can suggest the following solutions if it is feasible in your business scenario.
    Scenario 1: Batch is inwarded in one storage location"A" & stored for some time, then it is transfered to other storage loactions B & C (like production storage locations).
    In this case suggest to transfer the batch to storage loactions B & C just one or two days before the actual consumption of the batch & also keep the opening period  in QA07 sufficient days (between 10-15 days), so that the sytem will create the inspection lot in one storage location "A" . Since the batch is still not transfered to B & C, the system will not create inspection lots in B&C.
    Scenario 2: Batch is inwarded in all the storage locations with the same batch number.
    In this case suggest to inward the same bacth with different batch numbers, keeping the all other characteristic values same
    With Best Regards
    Vithal

  • Need to create a REPORT

    I need to create a kind of report, just like the one you can create in MSAccess, with data taken from a Jtable and also labels and text fields. I know nothing about how to make it. Can you give me some tips? Just know that I'm using Forte for Java.
    Thanks a lot for your suggestions,
    Giorgio

    I was thinking of a JTextArea, in which I should try to write all the informations I have, using it just like a Word page. Will it be easy, then, to print what's inside this JTextArea?
    Giorgio

  • Need to create a report of Items sold= last sale date report

    Hi Guys,
    There is an column of last sale date in OITM but that doesnt gives any data when you run a query. Basicaly client need to generate a report of Items with last sale date, is this possible SAP Business One?
    Regards

    Hi Joe,
    you could use the stock posting list report with a suitable date range & select only AR invoices in the 'Expanded' options, then sort by posting date in descending order
    This report can then be exported to Excel & all irrelevant transactions can be deleted, keeping only the first & second row for each item (Row 1 = Itemcode, Row 2 = last stock posting from AR invoice showing in the 'Price after discount' column).
    Alternatively, you might explore whether an SDK solution  may be created that runs the last prices report for all items.
    All the best,
    Kerstin

  • Need to create a report to show values for a particular date range

    I have to create a report, out of which I need two columns : << Customer Value Variance and Churn Score Variance >> to show values only for a custom date range, which will be entered via a dashboard prompt.
    These generic date columns are not present and cannot be added. I have to make use of Pres variables
    What I have currently done is:
    1) Created a prompt with 2 different date columns and passing those values into variables vStartDate and vEndDate. (I don't actually need those 2 column which I have selelcted, but I have taken those so that I can prompt the values in calendar format and pass onto the variables)
    2) Created report with necessary columns, with 2 extra columns (hidden) as vStart Date Column and vEnd Date Column which take the values from the presentation variables defined in the prompt. I have created these columns as then I can reference these in the two required columns if necessary.
    I am already facing error in report after doing this and I am confused how to proceed. Any suggestions?
    Thanks.

    Yes, but it only has one generic Date column, no start date and end date. I can't use that twice in the prompt. Although I can specify it to be 'between', but I'm not sure I can pass values to both variables like that.
    Currently I have used Campaign Start Date and Campaign End Date to enter values in calender format to the variables.

  • Need to create a report with drop down option

    Hi,
    I have created a report with a simple query. Its a real time report.
    select host_name, target_name, instance_name from MGMT$DB_DBNINSTANCEINFO
    where target_type = 'oracle_database';
    It gives me a tabular report. It works fine. But it is a huge report about 1000 rows. We can see a particular number of rows per page. Thats fine.
    I need something else. I will select a particular target name from a drop down and the report will give me the result for the respective target only. Is that possible ? How to do that ?
    Thanks in Advance

    Hello,
    When you create your report, in the "general" tab, under Targets click on the first radio button named "A target will be selected by the report viewer when viewing the report" and under that choose target type="Database Instance".
    Then in your report query, use the predefined variable ??EMIP_BIND_TARGET_GUID?? to identify the target the report user will select at execution time; for instance:
    select host_name, target_name, instance_name from MGMT$DB_DBNINSTANCEINFO
    where target_type = 'oracle_database' and target_guid=??EMIP_BIND_TARGET_GUID?? ;
    regards,
    Noel

  • Need to create a report having 40 columns using XML Publisher

    Hi XML Report Gurus,
    I have a weird requirement. I need to create a XML Publisher Report having 40 columns. This report would be a CSV Report.
    How can i create a RTF(Template) in MS-Word having 40 columns ?? I just cannot accomodate the columns, they start wrapping down.
    Can i create a template in Excel and map the data columns to the Excel columns?
    I can create a Oracle PL/SQL package and generate the output, but I want to know if I can achieve the same thing using BI Reports.
    Appreciate your feedback
    Kiran Ramachandra
    [email protected] __.____._

    What I did, I had the column titles in the XML file as data, like
    <COL01>Employee Name</COL01>
    <COL02>Employee Number</COL02>
    etc.
    I did it this way because columns were variable, and up to the user to pick. If you have fixed set of columns, you still can include their names in the XML file, this way you will be able to display then as fields on the template.

  • Creating batch for all materials

    Hi Experts,
    is it possible to create ONE batch number for all Items. It will be used for batch scrapping or something. For example , If we have some pieces from a few materials i will make transfer posting Batch to this common Batch, which I have already created.
    Regards

    Material level:
    The batch number is unique in all plants in connection with the material.
    The same batch number has the same meaning for the material in all plants. One batch number cannot have different specifications in different plants. During stock transfer to another plant, the specification of the batch is known in the destination plant even if the batch is placed into storage in that plant for the first time.
    In other words, it is possible to have a batch SCRAP for any material number.

Maybe you are looking for