Best quality for export?

What settings for best quality when exporting an HDV video to disk?
Using QT w/H264 but the quality is not acceptable. Can I tweak the settings?
FWIW, I get better quality using Sony Click to Disc at its default settings. Just trying to match that at this point.
Thanks.

Which "disc" are you exporting to? Hard drive, CDR, DVD-R, etc. And is the point to get as file a file size as possible or are you just trying to archive video but don't care about file size?
And to answer your question, yes you can tweak output settings for H264. When you go to Share -> "Export using QT..." on the export pull down you pick MPEG-4 then directly to the right is a button for "Options". Pick that. Also in there is a button for "Video Options" to refine it even further.
Patrick

Similar Messages

  • Best settings for highest quality for exporting a .mov  file to h.264

    Hi,
    I want to know what the best settings are for the highest quality for exporting a .mov file (720p50) to h.264. I want the same quality as the original.
    I want to know the data rate etc.
    regards,
    Jeroen
    Message was edited by: Woudgraaf-AV

    There is no way to get the exact same quality when transcoding from an editing source to a highly compressed H.264 QT. However, you can get a real high quality by adjusting the data rate.
    However, these things depend on the length of the original. I routinely encode H.264s with good results in the 3000-5000 data rate range. I also make sure that I use multiple pass encoding. Take a short snippet of your project (10 seconds or so), and try various bit rates until you have one you like that doesn't take forever.
    Andy

  • Best practice for exporting from iMovie '08 to iDVD

    I am looking to find out what is the best practice for exporting from iMovie '08 to iDVD. I have read the other postings that give the basic howto (export to Media Browser then select the video in iDVD). However, my question is a little more technical. I have 1080i HD projects. I am interested in burning them to DVD in the best possible quality. What setting should I be using when I publish to Media Browser?
    I am wondering about quality loss due to more than one conversion/compression. I suspect that when I export to the Media Browser then this is occurring. If I am not mistaken iMovie is using something like H.264 for this. Then, when I run iDVD I suspect it will it do another conversion/compression, I think to get to MPEG2. Not only could this result in a loss of quality but also it will take extra time. I am interested to know what others think about this.
    Finally, I am looking to create DVDs for a lot of video. I am wondering if there are any USB or firewire hardware devices out there that could speed up the compression. I use the Elgato Turbo.264 when I want to encode to H.264 but I wonder if there is something similar for DVD creation.
    Thanks in advance.

    the standards for videoDVD are 720x480, and usually mpeg2 encoded..
    so, your HiDef project HAS to be 'downsampled' somehow..
    I would Export with Qucktime/apple intermediate => which is the 'format' your project is allready, and you avoid any useless 'inbetween encoding'..
    iDVD will 'swallow' this huge export file - don't mind: iDVD cares for length, not size.
    iDVD will then convert into DVD-standards..
    you can 'raise' quality, by using projects <60min - this sets iDVD automatically to highest technical possible bitrate
    hint: judge pic quality on a DVDplayer + TV.. not on your computer (DVDs are meant for TVdelivery)

  • Best Codec for exporting animations with alpha channel from FCP timeline

    Whats the best codec for exporting animations (hopefully using loseless compression) that will retain alpha channel, and use the current sequence settings for fps and size?
    Currently Im exporting image sequences, but I'd prefer a wrapper.. I don't know much about the 'Animation' export codec.. I did notice that set to current size had some funky value of 753x450 or something.. instead of my current project size of 1920x1080...
    Anyhow.. Just seeing what others are doing..
    basically Im reading out some titles that I'll end up dropping over video later.. but since they render out so slowly (**** lower 3rds is slow) Im trying to get a jump on the process..
    Tx..

    PNG should do it. I think PNG is lossless (that's what they say, anyway). But realistically, if you use PNG, Animation, or JPG2000 set on highest quality, I'd dare you to tell a difference.
    I use PNG because it's supposedly lossless, renders twice as fast as Animation in a FCP timeline, and is usually about half the size.
    If you use "Export Using Quicktime Conversion", you will need to check all of the settings manually to make sure they match your sequence settings. This is always true, no matter what codec you use.
    If that sounds risky, your other option is to go into your sequence settings and change the codec to the one you want to render to (this will probably turn your whole timeline red), and then choose Export -> Quicktime movie.

  • Best quality movie exports from ipad3

    What is the best way for exporting movies from the ipad3. There is a huge file size difference if
    I use iphoto or imovie. I cant figure out why...
    My goal is to have the absolute best quality movie stored for future use.
    Thanks in advance!

    DNxHD in the MXF format is a good choice.  It's cross platform, has none of the issues of QuickTime, yet as good quality as ProRes.
    Maybe the 175 or 175X (10 bit) preset, depending on the source material.

  • Best Settings for Exporting DVD Footage in a Movie File

    Hello,
    I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
    I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
    Here's an example of what I did recently with my own settings:
    http://www.youtube.com/watch?v=qFV4sT7rHGs
    I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
    So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
    Thanks!

    First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
    Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
    Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results

  • Best quality for youtube

    I made a video and its 2.01 GB in iMovie. i want to put it on youtube but I want the best possible quality. The limit for youtube is 100MB whats the best way to compress my movie?

    Hi F,
    I followed your link and found your instructions about exporting from iMovie with best quality for YouTube.
    The instructions were pretty clear, although my options didn't line up with them exactly (I'll tell you my explicit settings below). Still, I exported it successfully.
    Then I uploaded the resultant .mov file to YouTube. When it was all finished processing, I viewed it. After the first fraction of a second all I saw was garbage -- just junk patterns filling the screen. The sound was excellent. (by the way, I had lots of very short clips in there -- 00:00:03 in length (not sure what the units are).
    So I went back to iMovie, opened up my movie project. Played the video. Now it is intermittent garbage, too. Looks just like the uploaded file, but only intermittently.
    Here are the exact options and settings I used for export:
    File->Share, chose quicktime and expert settings, pressed the "share" button.
    in the Export dialog, I selected "movie to quicktime movie" and clicked on the "options" button.
    Options:
    Video:
    Settings...
    Set compression to mpeg-4
    Set quality to medium
    Set frame rate to 30
    Let Key frame and Data rate defaulted (unchecked)
    Filter...
    didn't look at this. Now that I do, it's set to "none"
    Size...
    Selected the "custom size" radio button and set it to 320 x 240
    Sound:
    Settings...
    format: uncompressed
    sample rate: 44.1khz
    sample size: 16
    channels: 1 (mono)
    There was also a check box for "Prepare for internet Streaming"
    It was already checked and set to "fast start"
    I didn't change it.
    If you could give me any further help, I'd really appreciate it. This was my first attempt to put anything on YouTube.
    Thanks a lot,
    Bruce Delaplain
    Message was edited by: Bruce Delaplain1

  • What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

    What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
    Any help would be greatly appreciated! Thanks

    function(){return A.apply(null,[this].concat($A(arguments)))}
    bmiller0525 wrote:
    What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
    Any help would be greatly appreciated! Thanks
    thats way too vague of a question... best what?  quality? size? playback?
    best quality then use high bitrate, small size use low bitrate.

  • Which are the best settings for exporting comps before edditing in Premiere Pro

    Hello everyone!
    As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
    Let  me explain: I have two comps in AE (intro and outro) and want to export  them in Pr.Pro for edditing along with a fottage i shot.
    When i render them the size of the files are huge (30 sec= 7GB).
    Which  is the best method (and settings) i can export the intro and outro to a 'normal' file  size and then put them in Pr.Pro without loosing any quality??
    [Comp settings: HDTV 1080 29.97 (1920x1080)]
    AE and Premiere Pro both CS4

    If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
    Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
    Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
    See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
    "FAQ: Why is my output file huge...?"
    "FAQ: What is the best format for rendering and exporting from After Effects?"
    By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects".

  • Best codec for export from FCE?

    Heya, I'm sort of a newbie, so please be patient with me
    I'm trying to export a video from FCE using QT conversion.  I'm going to be putting it on Youtube.  What is the best codec for export?  I've always heard that H.264 is the 'best', but my videos have always been pale and washed out.  I tried exporting using MPEG-4 video, and it's not washed out.  Is H.264 better and I should just deal with the paleness, or does it not matter too much?
    Thanks

    All the Web video sites re-compress your videos. So it's generally best to upload high quality files – typically determined by bit rate.
    My suggestion would be to export as a Quick Time movie at current settings. (Guessing that you edited an AIC sequence,)
    If you don;t have MPEG Streamclip, do a search and download it. In Streamclip, open the file you exported from FCE. Export to Quick Time. For Compression, choose H.264 from the drop down menu. Don't change Frame Size. If your movie is interlaced, check De-interlace. Check the Limit Data Rate box and type in 12,000 if the size of your movie is1080; 6,000 if your movie is 720; 3,000 if your movie is 480.
    Use the YT uploader and you should be good to go.
    Russ

  • Best practice for exporting a dps folio so a third party can work on it?

    Hi All,
    Keen for some thoughts on the best practice for exporting a dps folio, indd files, links and all, so a third party can carry on the work. Is their a better alternative to packaging each individual indd file and sharing the folio through adobe?
    I know there have been similar questions here in the past, but the last (that i've found) was updated mid 2011 and I was wondering if their have been any improvements to this seemingly backwards workflow since then.
    Thanks in advance!

    Nothing better than packaging them and using Dropbox to share. I caution you
    on one thing as far as packaging:
    http://indesignsecrets.com/file-packaging-feature-can-cause-problems-in-dps-
    workflows.php

  • Best Practices for Export

    I have recently begun working with a few AIC-encoded home movie files in FCPX. My goal is to compress them using h.264 for viewing on computer screens. I had a few questions about the best practices for exporting these files, as I haven't worked with editing software in quite some time.
    1) Is it always recommended that I encode my video in the same resolution as its source? For example, some of my video was shot at 1440x1080, which I can only assume is anamorphic. I originally tried to export at 1920x1080 but then changed my mind as I assumed the 1440x1080 would just stretch naturally. Does this sound right?
    2) FCPX is telling me that a few of my files are in 1080i. I'd like to encode them in 1080p as it tends to look better on computer screens. In FCPX, is it as simple as dragging my interlaced footage into a progressive timline and then exporting? I've heard about checking the "de-interlace" box under clip settings and then doubling the framerate but that seemed to make my video look worse.
    3) I've heard that it might be better practice to export my projects as master files and then encode h.264 in Compressor. Is there any truth to this? Might it be better for the interlaced to progressive conversion as well?
    Any assistance is greatly appreciated.

    1) yes. 1440 will display ax 1920.
    2) put everything in a 1080p project.
    3) Compressor will give you more options for control. The h264 from FCP is a very high data rate and makes large files.

  • What is the best setting for export movie in widescreen format?

    Please tell me what is the best setting for exporting movie in Widescreen format?

    Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
    Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
    Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
    However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
    bogiesan

  • Whats the best settings for exporting a three camera youtube video on a mac book pro

    I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

    chucknoris501
    What version of Premiere Elements are you using on Mac?
    Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
    See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
    If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
    hard drive for upload to YouTube at the YouTube web site.
    ATR

  • Re: Best options for exporting a sequence and making a DVD

    I using iPad 2.

    "Re: Best options for exporting a sequence and making a DVD" and "I'm using iPad 2" and "My phone number is not verified!" don't seem to be entirely related. Can you please restate your question?

Maybe you are looking for