BESX SP3 MR6 - Email attachments are now ALWAYS Auto-download - not good with duplicate attachment names

Does anybody else see where email attachments are now always auto-download on all devices. The policy option was phased out in 5.0 but the default at that time was no (to auto-download). Now they all auto-download.
1. PDF will not display because they must stay as attachment to render on Blackberry device. Says
“This attachment type cannot be viewed on your device”
2. Phone messages attached as voicemail.wav - first one works, but since no longer the "Preview" option second says "Fielname exists - Rename?" Some devcies you can save and go back - others you can't.

Surely there's an expert on this forum who can help?

Similar Messages

  • Verizon FIOS email attachments are now showing as "undefined"

    Attachments previously showed the name of the document/file that was attached. Now it just shows as "undefined".

    Try this app:
    http://www.joshjacob.com/mac-development/tnef.php .
    It might not work in Mavericks though. Also there is more information available in the posts listed on the right side of this page under "More Like this".

  • My iPhone has two identical options under "iTunes wi-fi sync" that are the same computer. I only have one user on my  computer, and I tried moving my iTunes file in Finder to organize it and now my library's not synced with my phone. Help?

    My iPhone has two identical options under "iTunes wi-fi sync" that are the same computer. I only have one user on my computer, and I tried moving my iTunes file in Finder to organize it and now my library's not synced with my phone. Help?

    I have the same problem. Right now my iPhone 5S shows 3 instances of the computer to which it is connected under Settings » General » iTunes WiFi Sync. I'm having problems connecting and syncing, and this is probably the cause: the phone chooses one of these connections, and it isn't the one that's actually in use. What's probably happening is that the phone and computer establish a connection using a dynamic IP address, the address becomes "disassociated" due to error, another address is associated, the phone retains each address/link, and each link is displayed as if it represents a separate computer (the fact that the name of the computer is identical is ignored, as the only thing that is considered important is the IP address). But that's all conjecture. More important, I'm not sure how to fix the problem. A network reset doesn't do it.

  • HT5312 I want to reset my security questions.... but the email you are sending it to does not exsist anymore.

    I want to reset my security questons...but the email you are sending it to does not exisit any more... I just want to buy songs from your awful corporation .. to get you people more rich.. whats the problem here

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    If you no longer have access to the rescue email address that you put on your account then you will need to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to update your rescue email address to an email account that you still have access to for potential future use

  • O changed my email address and now my iPod will not send or receive emails

    I changed my email address and now my iPod will not receive nor send emails.

    I installed a batch of windows updates and now it appears to be fine. Don't understand but it is all good now.

  • Documents that are park in FBV0 do not update with the new user name when

    Hi,
         I need to find out why documents that are park in FBV0 do not update with the new user name when any changes are made.  Also when we park using MIR7 and make changes to the documents at a later time the document updates with the new users name.
    Requesting you to please suggest what could be the reason.
    Earliest reply will be highly appreciated,
    With regards,
    Rj

    Hi,
        I have checked this in system. I posted one Parked invoice using T.code FV60 and there i appeared my name because i created. But after some time one of my collegue changed the reference and text field with his login i.d. But still in the invoice it is showing as my name whereas if we go to the environmnet, there in the changes we can see what are the changes done and it is appearing my collegues user i.d. But in the main invoice it is still appearing my name.
    Regards,
    Rj.

  • Photos sent as email attachments from iPhone ALWAYS have the file name -- photo.jpg?

    Do all photos sent from an iPhone to an email address get sent with the name -- photo.jpg?
    Anybody know of a way to have the iPhone not send all emailed photos as photo.jpg
    Cheers,
    Jay

    Is there no one from Apple who reads these discussion/community boards?  Over 245 views and no reply to your question.  I saw a similar concern from 2009 with over 700 views and no reply.  I can't believe that Apple hasn't fixed this.
    I am a Blackberry user and have the choice to switch over to iphone next year.  I have to use my phone on a daily basis for work to take photos and email them to multiple people (including myself).  Blackberry has always uniquely named each photo with the date it was taken plus a unique identifier so it's really easy to file, email, and figure out which photo was which (they also list by name and not just thumbnail). 
    I would really like to switch over to iphone but if there isn't an app or some way to fix this...I don't know what I will do.  You'd think that an issue that's over 4 years old would have been resolved by now....?  The other thing that is really annoying with iphone photos is that whenever someone emails me with them, a lot of times they are upside down, even if they corrected it on their phone before emailing it to me.  Somehow the photos do not work well with Microsoft Outlook. 

  • Photos sent as email attachments from iPhone ALWAYS have the filename photo.jpg?

    Respected,
    Does anybody knows how to solve this?
    I would like to have a number next to the photo name (for example: photo001.jpg, photo002.jpg...)
    Thank you in advance,
    Milos Perovic

    Is there no one from Apple who reads these discussion/community boards?  Over 245 views and no reply to your question.  I saw a similar concern from 2009 with over 700 views and no reply.  I can't believe that Apple hasn't fixed this.
    I am a Blackberry user and have the choice to switch over to iphone next year.  I have to use my phone on a daily basis for work to take photos and email them to multiple people (including myself).  Blackberry has always uniquely named each photo with the date it was taken plus a unique identifier so it's really easy to file, email, and figure out which photo was which (they also list by name and not just thumbnail). 
    I would really like to switch over to iphone but if there isn't an app or some way to fix this...I don't know what I will do.  You'd think that an issue that's over 4 years old would have been resolved by now....?  The other thing that is really annoying with iphone photos is that whenever someone emails me with them, a lot of times they are upside down, even if they corrected it on their phone before emailing it to me.  Somehow the photos do not work well with Microsoft Outlook. 

  • Email attachments are converted to HTML

    I have a G4 ibook I rarely use and a G5 that I use daily both have recently begun to automatically download and convert all email attachments to .html, which when opened are gibberish.
    What can I do to fix this?
    When and if I can get Explorer to open I dont have this problem.

    comments?
    Firefox and IE simply ignore the MIME part (it's probably more complicated than that - I'd guess they have a list of 'known' file extension types they trust over what the webserver claims for them, and then fall back to the MIME type specified for more esoteric ones).
    Safari changed sometime around 1.2 -> 1.3 to use the MIME types more. Why? I have no idea, but I'm pretty sure that's the cause.
    If you have a URL to one of your attachments in the webmail site, try typing this in the Terminal:
    curl -I [your URL]
    In the output, the MIME type is indicated by the 'Content-Type: xxxxxx/yyyyyy' entry.

  • Quicktime attachments are now tiny

    Hello:
    For no reason that I can determine, Quicktime email attachments appear postage stamp size in my composition window. In the past, when I would attach a 640x480 Quicktime for a client, it would appear full size (640x480) in the composition window. But today, when I attached a 864x486 Quicktime, two small postage stamp sized versions of the Quicktime appeared in the window, one at the upper left, covering some of the message text, and one at the bottom where I wanted it. If I resize the window the one at the upper left goes away, but the one at the bottom remains very small.
    If I send it, then check the email in the Sent box, the Quicktime appears at its proper, full size. I'd really like to see it full size while composing.
    This is happening in Mail 2.1 on all of our Tiger systems, a dual 2.5 Ghz G5,a dual 1.2 Ghz G4 and a dual 1.0 Ghz G4, all running 10.4.11. We recently updated all of these systems to 10.4.11, so I think this issue is related to that update.
    Thanks.
    Shawn Marshall
    Portland, Oregon

    My Macbook Pro is doing exactly the same thing.
    I think the fault appeared after running software update at some point. I was too busy at the time to analyse which update may have caused the problem. It's pretty boring. I'm just hoping that at some stage after another update, it will mysteriously fix itself.
    Sorry i can't help.
    I googled to see if anyone else had the same experience and your posting came up.
    Phil Kenihan.
    Australia

  • When exiting Outlook it complains attachments are open when they're not

    This has quickly become a widespread issue at our company over the last few months. End users will use Outlook throughout the day, opening and closing email attachments from within Outlook as per normal. At the end of the day, they'll try to exit Outlook, which
    will then popup an error one by one for every attachment that has been opened by that user since they started Outlook:
    "A program has attachment filename open. Changes to this file will be lost unless you save your changes to another file by clicking the File Tab in the other program, and then clicking Save As."
    I can assure you that NONE of the attachments that it's complaining about are actually open in another program. I've tested by shutting down ALL programs on the workstation before closing Outlook, and the same error will
    popup over and over for every attachment that user has opened throughout the day.
    Environment is Outlook 2010 and 2013 32-bit, running on Windows 7 SP1 x64 workstations and laptops, most are in online mode with Exchange 2010 SP3 Update Rollup 7 on the backend.
    This issue has popped up on various combinations of software, some running Outlook 2010, some Outlook 2013, some in online mode and some in cached mode, for MANY users in our company (not all though).
    Googling for similar issues doesn't turn up much.
    Any thoughts?

    Hi,
    Do you have a folder redirection environment?
    When we open attachments within Outlook, Outlook puts these attachments in a subdirectory of the Temporary Internet Files directory as an additional precaution. We may try to empty the Temporary Internet Files folder before exiting Outlook to check
    if this issue will disappear. We can find the Temporary Internet Files directory in the OutlookSecureTempFolder registry key from the following registry path:
    HKEY_CURRENT_USER\Software\Microsoft\Office\xx.0\Outlook\Security  (xx.0 is the version of your Outlook)
    In addition, does this issue exist if we open Outlook in safe mode? Press Windows key + R to open the Run command, type
    outlook /safe and press Enter. If this issue doesn't exist in safe mode, it means this issue may be caused by a problematic add-in you installed. We can go to File > Options > Add-ins and then disable suspicious add-in
    to resolve the issue.
    If you have any virus scanner installed, please also try to temporarily disable it and then test it again. This is because virus scanner always integrate itself with Outlook, which may cause an Outlook shutdown issue.
    Please let me know the result.
    Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Outlook Email photos are visible in IE but not on Firefox, why?

    Outlook Live email photos that are not attachments are missing from emails. If I open the same in IE, they are there. How do I fix?

    The images might be embedded as CID (Content-ID) (src="cid:image") that link to an image that is attached to the message.<br />
    Firefox doesn't handle images embedded that way.
    You would need an email program like Thunderbird to see the images.
    * http://en.wikipedia.org/wiki/MIME

  • Help :My 9860 bad now,always auto-restart.

    My 9860 USB charge yestoday. Now it always auto-restart,
    install the battery connected to a computer show repeated 10 seconds the LED light off.
    If without batteries then it display battery "X"  when connected to a computer.
    9000 bad now |*_*| auto restart wiping....

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Email Alerts are working for some but not all users

    If some users are getting the alerts and some not, it seems more likely that the issue is with your email server or email clients, not with your SW setup.
    Have you checked SPAM / Junk folders on the server and on the clients?

    We have alerts setup for multiple scenarios.  All of our users are setup the same but not everyone is getting the alert.  We are using the spiceworks mail servers and I have checked the Spiceworks App Notifications are set to Yes.  Any ideas?  
    This topic first appeared in the Spiceworks Community

  • Like so many others I have not been able to access or send emails with iCloud now loosing business. Not good enough and lack of info from Apple is also not good enough!

    Like so many others I have not been able to access or send emails on iCloud.  This is now loosing me business! Not Good enough Apple and your lack of information is poor customer service.

    Unfortunately, Apple does not yet allow merging of Apple ID's. if you were once using [email protected] as your Apple ID then there is no way to link that ID with the new one to avoid losing the previous data under that old ID. You will have to either go back to using the old ID to save the old data or just keep both, which you arfe allowed to do.

Maybe you are looking for

  • Automatic goods issue of components upon creation of Production Order

    Hello gurus. The business would like to have the components in a Production Order automatically issued (with Movement Type 261) upon the creation of a Production Order. I was investigating this possibility under the Production Scheduling Profile opti

  • PO Printing Before Release

    Hi All, Please let me know, would there be any possibility to get a print of PO before release with release strategy applied to it, Coz, in my one of the scenario its happening so, and i want to know what would be the probable reason for that, Regard

  • How do you create a PRINTABLE wallpaper pattern?

    This may sound really stupid but I have searched the internet thoroughly and can not find an answer to this. I am fluent in Photoshop and semi fluent in Illustrator. I run CS6 for both. No what I want to be able to do is create a repeating pattern th

  • This is a very simple question,but I don't know.Please me.Thank you!

    I am a Chinese student in a university.I have a very simple question to ask. I have writed a EJB module,and I have deployed to Weblogic8.1 successfully. 1.Now I want to write a client program.Is it necessary that the client program is packaged in the

  • Return delivery - J1IS - posted automatically

    Hi, I need a clarification on blw issue, I have posted migo (101) with excise capture and post option.. where all are updated correclty,  i have checked the number range also and it updated correctly. Later, i'm returning the material to vendor (122)