BEx variable 0FPER could not be evaluated

Hi,
I am using BW ver 3.1, For one of the infopackage which uses OLAP variable in selection gives the error message for Fiscal period.
"BEx variable 0FPER could not be evaluated - No error message."
one way for this problem is using 0P_PRFP1 instead of 0FPER.
Does anybody have come across this error anytime?
Early response appreciated.
Thanks
Ganesh

hi Ganesh,
I faced the same issue, I could not install variable 0FPER from BI Content. Could you tell me how to fix ur issue?
Thank you!

Similar Messages

The post-expression for the step 'Set Station Global Models' could not be evaluated.

When running a TestStand sequence, I get the following error message:
The post-expression for the step 'Set Station Global Models' could not be evaluated.
Variable or property types do not match or are not compatible.
Error Code: -17321; Variable or property types do not match or are not compatible.
Although I do understand what the above is telling me, fixing the root cause is somewhat another thing.
I'll explain the scenario. The code is developped in TS4.1.0, although that should be irrelevant.
I inherited a TestStand project which calls LabVIEW modules. The original sequence works fine on the test pc (which is remotely located). The local and remote PC's share the same StationGlobals.ini.
Here is why it is strange.. I do get the error message on the local PC whether I use the old or the new code. I was assuming that using the same StationGlobals.ini would have fixed that, but it didn't.
When I run the old code on the remote PC, I do not get that message, but I do get it with the new code. I don't recall modifying code that affected the StationGlobals. My goal is to fix it on both machines (at least the remote one).
This is the expression that it does not like:
StationGlobals.Models=Locals.Models,
However, that very same expression exists in the original code. The one thing that did change is the addition of a new model number in the Locals.Models.newNumber. I suspect that this contributes to the error. But why does it give me an error when I run the original sequence locally? Maybe I should try running it again..
In either case, any suggestions to overcome the error?
Thanks.
RayR
Solved!
Go to Solution.

Please ignore post.
I found the problem.. There was a mismatch with the number of models. Easy fix. It's all good.
For someone else who might tumble onto this thread for the same reason, here's an explanation.
I added a new model with its variants to the list of Locals.Models. In total, there were 16 additions to the list.
I also added these to the StationGlobals. Which meant that my StationGlobals no longer matched the one on the remote PC.
Where the error came in is that there was one missing model in the StationGlobals, so the size (number of models) did not match that of the Locals.
Slight oversight in the sea of models that are listed (I'm not even going to count them). Now fixed.
... and embarrassed ...
I may as well give myself an "Accepted Solution".
Spoiler (Highlight to read)
Since I've been naughty all year it will be my only Christmas gift..
Since I've been naughty all year it will be my only Christmas gift..

Error "Token in strings could not be evaluated" in form personalization

Getting Error "Token in strings could not be evaluated" in form personalization.
The syntax used is -
='BEGIN
CREATE_URL_COLL('''||${item.IEXPYPRS_CC.CC_TYPE_DSP.value}||''');
end'
Please suggest where I am going wrong.
Thanks and Regards,
Dibyanshu

Andreas.
='BEGIN
CREATE_URL_COLL('''||${item.IEXPYPRS_CC.CC_TYPE_DSP.value}||''');
end'what about the above code is it related with form?
because i tried to use that something like this
BEGIN
CREATE_URL_COLL('''||${item.IEXPYPRS_CC.CC_TYPE_DSP.value}||''');
end;and it gave me error, compilation error.
sarah

Hire Process test through R/3 - Feature IVWID could not be evaluated

Hello,
We are implementing HR Administrative services for Country grouping 99. For Hiring process when we test the process from R/3 we are getting an error - "Feature IVWID could not be evaluated".
Can anyone help us with this error?
Regards,
Poornima

any help on how u solved this?

SSM 7.0 - Text variable error - Could not acces to Reports

Hi SSM experts,
We are implementing SSM 7.0 SP6 HF1.
After the implementation of a text variable in PAS in order to include it in a report we have lost the access to the reports and the entry and approval settings.
These are the main steps we followed:
1.- Data model created via Cube Builder
2.- Data loaded via Entry and Approval.
3.- With that model the Scorecard and a set of reports were working as expected.
4.- After that we created a text measure directly in PAS via the following command: CREATE yearly TEXT NONKPI50_ACT 'KPI text'.
4.- Due to this creation we have lost the access to the reports in SSM UI and to the Entry and Approval settings in SSM Admin.
Could anyone please advice us in order to solve the problem?
We have realized that if we delete in PAS the text variable created everything returns to the original situation and everything works ok.
Did we create the text variable ok? Is it possible to create text variables in a model created via Cube
Builder and loaded via Entry and Approval?
Thank you very much in advance.
Kind regards,
Santiago

Robert, Ricardo,
this text variable is just a variable to be used in a navigator report, not to be used in SC. Sorry if I was not clear.
Robert, I will deal this probelm with the customer message team but if anybody has came up with this problem in any project please let me know how to solve it.
Anyway I will check how CONSTANT TEXT works. I will appreciate if you would let me know the result of your checkings.
Thank you very much for your help.
Regards,
Santiago

BEx variables restricted value not shown

Hello,
I have 2 variables defined and used in a query. I put both these characteristics as global filters.
When the query is run, a popup screen allows user to input these 2 variable values.
The navigation block in the worksheet shows only 1 of the 2 variables values entered by the user. That is, only the restricted value for one variable is shown. The other is not shown. The result is, however, correct.
Not sure why is it so. Hope to get some clues.
Thanks.
Regards,
Mirella Russo

Dear AVR,
Thanks for the reply.
I placed the period and year infoobjects restricted by their respective variables in the free characteristics area but still the filtered values are not showing, although the period and year characteristics for filtering are shown as normal in the navigation block.
I have several other reports also using the same period and year variables in free char or global filter section without such 'anomaly'.
I noted that this problem report has columns restricted also by period and year variables. In fact, the year variable is an offset of -1. Is the problem caused by this restriction?
I tried creating a new query of the same design. The problem is replicated.
I hope you can throw me some more clues.
Appreciate it very much.
Thank you.
Best regards,
Mirella Russo

WEBI prompt based on bex variable suppress not assigned hashtag value in LOV

Hi,
is it possible to suppress the "Not assigned (#)" value from the list of values in a webi prompt based on a bex variable?
This "Not assigned" value is something BW specific, BW adds this to each characteristic automatically?!
WEBI:
RSRT:
It needs to work in WEBI, not only in RSRT, and the filtering of data still needs to work.
For rsrt it works, when you exclude the not assigned value in "Filter > Characteristic Restrictions" and use the bex variable in/through "Filter > Default Values", but this does not work in WEBI, because the BEX Query Data is not filtered on the in the prompt selected value.
Thanks.
Regards
David

Thanks David for a quick reply !
I could manage to avoid # values in WebI prompt using BAdI implementation, here is the brief:
Problem:
WebI report prompt (which shows BEx variable) list of values shows blanks or # . Rrequirement was to avoid these blanks or #
Environment:
BW 7.3
BO 4.0
BW Cube > BEx Query > OLAP Connection > WebI report
Solution:
InfoObject Level1 in BW had # values in masterdata, this could not be deleted since it was in use with other Cubes.
Vaurable Var_Level1 displays # when pressed F4 running BEx query and in list of values in WebI report prompt.
I implemented BAdI on Level1 info object and variable Var_Level1.
Steps to implement BAdI are as in following link
BEx Query - Control the values which are shown on F4
Used following code to elimitate #.
METHOD IF_RSR_VARIABLE_F4_RESTRICT~GET_RESTRICTION_FLAT.
DATA: l_s_range     LIKE LINE OF c_t_range.
DATA: l_var_range   LIKE LINE OF i_t_var_range.
DATA: IT_MZLEVELS TYPE TABLE OF /BIC/MZLEVELS,
WA_MZLEVELS LIKE LINE OF IT_MZLEVELS.
DATA: L_ZLEVEL1     TYPE /BIC/OIZEVEL1.
IF i_vnam EQ 'ZV_LEVEL1'.
SELECT /BIC/ZLEVEL1
FROM /BIC/MZLEVELS
INTO CORRESPONDING FIELDS OF TABLE IT_MZLEVELS
WHERE OBJVERS       = 'A'.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
SORT IT_MZLEVELS BY /BIC/ZLEVEL1.
DELETE ADJACENT DUPLICATES FROM IT_MZLEVELS COMPARING /BIC/ZCLV1GP.
DELETE IT_MZLEVELS WHERE /BIC/ZLEVEL1 = ''.
l_s_range-iobjnm = i_iobjnm.
l_s_range-sign   = 'I'.
l_s_range-option = 'EQ'.
LOOP AT IT_MZLEVELS INTO WA_MZLEVELS.
l_s_range-low    = WA_MZLEVELS-/BIC/ZLEVEL1.
APPEND l_s_range TO c_t_range.
ENDLOOP.
ENDIF.
ENDMETHOD.

Error variable could not be replaced

friends
we recently went through upgrade to 3.5.
after the upgrade we are having problems in executing queries.
one such error says "error variable 0Fyear could not be replaced"
bascially we have sap exit variable which brings fiscal year. and we have defined offsets on it so that it brings previous two years.
initially when i enter selection in variable screen i get the message saying error variable 0FYEAR could not be replaced and when i still execute the query i get the result but it shows up the same value for all three years.
looks like its not taking offsets.
do u think its got something to do with the variable. since its sap exit variable ?
thanks

Bhanu
as you said it could be because of fiscal year variant.
after upgrade when i am trying to run a query on my multiprovider i am getting error message saying
Determination of characteristic Fiscal Year Variant is not permissible
and in description it says
in a multiprovider a characterstic value can only be uniquely determined for a character if its been set to same value in all data providers.
it says one of the cube is not defined with Fiscal year period Z1 (this is the value in all other cubes) and has to be defined.
i have a multiprovider which is actually pulling data from 4 cubes. as per the procudure given from the error message this is what i have done
infocube definition---time charactersticsextras-structure specific properties of infoobject.
under constant column i have Z1 value for fiscal year variant. i deleted this value for the multiprovider. and i was able to run queries on the multiprovider.
for all my cubes in update rules fiscal year variant is defined as constant Z1. but still under structure specific properties of infoobject in respective infocube i see it only for 3 cubes and for one cube its missing.
now since this problem came up the other solution what i have is to set Z1 for all the cubes under my multiprovider.
though the system is open the column constant is greyed out. and i actually tried to transport from dev but for some reason i am not able to.
for all my cubes in update rules. fiscal year variant is defined as constant Z1.

Need clarification on BEX variable usage in customer exit.

hi,
i am an ABAP guy,i dont have any idea about BW,But here i got one problem,
1)Variable has been craeted in BEX Report (processed by Customer exit).
2)i am trying to write ABAP code in CMOD customer exit(ZXRSRU01),but when i am calling BEX variable it is not taking it is giving error(it should defined by data statment)so how to call the bex varible in Customer exit,if any body have sample code or any idea kindly let me know.

Hi and welcome to SDN!
there are a lot of examples and clarifications in these forums. For instance:
Re: steps for a customer exit.
Re: Regarding the Code for the Customer Exit
Best regards,
Eugene

Warning could not carry out all normings

Hi Experts,
why would a user get the following error in BEx?
"warning could not carry out all normings"
Thanks
Dave

Hi,
I think in this case there might have been norming set up in the query, or that some one accidentally set the norming on in the calculation. You can always switch this off at the workbook. At any query cell, right-click > ALL CHARACTERISTICS > NORMALIZE > NO NORMALIZATION. The error should then go away.
Cheer,
Gimmo

Task Scheduling Script - Need help with passing the scheduled command (variables are not being evaluated)

Hi Everyone,
I'm trying to get a simple task scheduler script to work for me and can't get the command I need passed to the scheduler to evaluate properly.
Here's the script:
###Create a new task running $Command and execute it Daily at 6am.
$TaskName = Read-Host 'What would you like this job to be named?'
$Proto = Read-Host 'What is the protocol? (FTP/FTPS/SFTP)'
$User = Read-Host 'What is the user name?'
$Pwd = Read-Host 'What is the password?'
$Server = Read-Host 'What is the server address?'
$NetworkDir = Read-Host 'Please input the network location of the file(s) you wish to send. Refer to documentation for more details.'
$RemoteDir = Read-Host 'Please input the REMOTE directory to which you will upload your files. If there is none please input a slash'
$Command = 'winscp.com /command "option batch abort" "option confirm off" "open $Proto://$User:$Pwd@$Server" "put $NetworkDir $RemoteDir" "exit"'
$TaskAction = New-ScheduledTaskAction -Execute "$Command"
$TaskTrigger = New-ScheduledTaskTrigger -Daily -At 6am
Register-ScheduledTask -Action $TaskAction -Trigger $Tasktrigger -TaskName "$TaskName" -User "Administrator" -RunLevel Highest
Write-Host "$TaskName created to run Daily at $TaskStartTime"
What's messing up is the $Command creation, the command needs to have the quotes around "option blah blah", but if I wrap the whole line in single quotes the variables that are evaluated for the "open blah blah" strings (which also need
to be inside quotes) and the "put blah blah" string are not being evaluated properly.
I've dorked about with different bracketing and quoting but can't nail the syntax down, could someone point me in the right direction? My Google-fu seems to be lacking when it comes to nailing down this issue.
Thanks

Hmmn, closer. I'm getting this error now:
+ $Command = $tmpl -f $User, $Pwd, $Server, $NetworkDir, $RemoteDir
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (winscp.com /com...t {4} {5}" exit:String) [], RuntimeException
+ FullyQualifiedErrorId : FormatError
And the command being added to the new task looks like this:
winscp.com /command "option batch abort" "option confirm off" "open ($Proto)://($User):($Pwd)@($Server)" "put $NetworkDir $RemoteDir" "exit"
Here's the current state of the script. I get what you're doing to try to bypass the quotes issue, using an array. I'm just not awesome at this yet sooooooo...
$TaskName = Read-Host 'What would you like this job to be named?'
$Proto = Read-Host 'What is the protocol? (FTP/FTPS/SFTP)'
$User = Read-Host 'What is the user name?'
$Pwd = Read-Host 'What is the password?'
$Server = Read-Host 'What is the server address?'
$NetworkDir = Read-Host 'Please input the network location of the file(s) you wish to send. Refer to documentation for more details.'
$RemoteDir = Read-Host 'Please input the REMOTE directory to which you will upload your files. If there is none please input a slash'
$tmpl = 'winscp.com /command "option batch abort" "option confirm off" "open {0}://{1}:{2}@{3}" "put {4} {5}" exit'
$Command = $tmpl -f $User, $Pwd, $Server, $NetworkDir, $RemoteDir
$TaskAction = New-ScheduledTaskAction -Execute $Command
$TaskTrigger = New-ScheduledTaskTrigger -Daily -At 6am
Register-ScheduledTask -Action $TaskAction -Trigger $Tasktrigger -TaskName "$TaskName" -User "Administrator" -RunLevel Highest
Write-Host "$TaskName created to run Daily at $TaskStartTime"

Bursting: Could not determine recipient - Bex broadcaster

Hi experts, i have this error in bex broadcaster for an workbook:
Bursting: Could not determine recipient
when use the bursting.
The error appear when use this option:
Generate Document with Variable Value -- Name of variable
Attribute for Recipient Determination - Attribute that contain email address.
Could you help me?
Thanks a lot.
Regards.
Andrea

Hi,
May useful to you:-------
/people/ramkumar.ghattamaneni/blog/2008/02/25/using-variables-while-broadcasting-queries-to-the-portal-in-bi-7
Regards,
Suman

Abort Could not determine a value for variable 0DAT from the authorizations

Hi All,
I encountered an error '/ Abort Could not determine a value for variable 0DAT from the authorizations\' when executing my query on a multiprovider in BW 3.5.
Can anyone help me in finding a solutionn to this issue.
Thanks,
Kartik.

Hi Kartik,
I am sorry as that note is for NW2004s. Please check if 0DAT variable installed from a business content? if not then I think thats the cause of the problem.
Hope this helps,
Bye...

Crystal Report not Adopting all possible Dropdown Values from BEx Variable

Hi all,
I am having an issue in a Crystal report where the drop down parameter that is sourced from a BEx query variable does not include all the possible values in the cube (or in master data). After learning my lesson the first time of not changing the name of the variable or changing it to dynamic (this causes it to break), I had the understanding that the value list may not be complete when running the report in the Crystal client or in the viewer, however, I thought it should be correct when published to the BOE and run in infoview. I am getting the same incomplete list in infoview. I published the report into infoview using the Crystal 2008 desktop client, not the /CRYSTAL/RPTADMIN transaction.
I know there are a couple ways of sourcing a Crystal report from a BW query - using MDX vs. not, etc. I created this report using the SAP menu > "Create new report from a query". I don't believe Crystal will easily let you use that menu option to create a report off two BW queries joined together (which is what I am doing), so I built it off one originally (using the SAP menu), then added the other later on. I have the checkbox for "Use MDX driver with support for Multiple structures" checked. In database expert, my "Selected Tables" both are of database type "SAP BW Query".
Do I have the right understanding of how the value list should work when sourced from a BEx variable? If so, can anyone offer any suggestions for getting the value list populated correctly?
Here's some info:
Crystal version: CR2008, version 12.2.4.507
BOE version 3.1
SAP BW 7.01 EhP 6
Thanks,
Chad

Hi,
- in the Crystal Reports designer the list of values is not online and there is a maximum number of values - configured by a registry setting:
(windows 7)
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Business Objects\Suite 12.0\SAP\BWQueryReportWrapper
Key: MaxPickListSize
and correct you can not change the name of the variable or set it to dynamic as the definition is based on the BEx query.
I know there are a couple ways of sourcing a Crystal report from a BW query - using MDX vs. not, etc. I created this report using the SAP menu > "Create new report from a query". I don't believe Crystal will easily let you use that menu option to create a report off two BW queries joined together (which is what I am doing), so I built it off one originally (using the SAP menu), then added the other later on. I have the checkbox for "Use MDX driver with support for Multiple structures" checked. In database expert, my "Selected Tables" both are of database type "SAP BW Query".
The checkbox on the Multi Structure is not for the option to combine 2 Bex queries - it is for Bex queries with 2 structures and the BW query driver has been deprecated already and you have to use the MDX Driver.
Do I have the right understanding of how the value list should work when sourced from a BEx variable? If so, can anyone offer any suggestions for getting the value list populated correctly?
in Crystal Reports Designer the list is static and when you publish the report using the BW Publishing to your SAP BusinessObjects Enterprise system the list becomes dynamic in InfoView.
regards
Ingo Hilgefort

Could not determine value for variable 0P_FVAEX (or 0P_CTPCA)

I get the below error while accessing a query on the planning Info Cube. I used the SAP Exit variable Most Current Data (Transactional InfoCube) (0S_RQTRA) in the query for the Characteristic - Request ID (0REQUID) to extract the data from the yellow request too.
I do not use the below variables as in the below eror in my query at all. Please assist.
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.

Hello,
you need to take a closer look at your query. Somewhere you used one of the 0P_* exit variables, which work only for controlling related InfoCubes. Use your own variables.
Regards,
Marc
SAP NetWeaver RIG

BEx variable 0FPER could not be evaluated

Similar Messages

Maybe you are looking for