BI, CRM, Portal same server?

Does anyone know if its possible to run BI, CRM, Portal on the same server? Either way does anyone have links to docs that explain?

Technically you can run both on the same server as long as it is a EP 7 system with BI JAVA and the required Business Packages for CRM.
I have not seen any documents explaining this specific issue, you can see the attached document for recommended system landscape.
https://websmp102n.sap-ag.de/~sapdownload/011000358700005089192006E/BExWebSysLandscapes_v1.pdf

Similar Messages

2 Portal Instances on Same Server

I am trying to create a second portal instance in a separate database on the same server. The 9iAS lives on another server. I have already successfully got the first portal up and running with web browser access. However, I'm not sure how to get the second portal up and running with that ssodatan script.
I tried specifying a separate port (7778) in that script and started a second port listening in httpd.conf, but this doesn't work. I also tried specifying a separate port and separate url (like portal302 and portal302_sso) in the http parts of that script, but this didn't work either.
Each portal has it's own login server installed, so I don't want to associate both portals with a single login server.
Can someone help me??? Thanks.

Kathryn,
Presumably you installed both Portal instances in different schemas (i.e. Portal30 and Portal309 etc.). If so, then all you will have to do is run the ssodatan script against each, referencing the exact http address for each. Once you have done this you should be able to contact both from the same http port (i.e. port 80) by referencing them in the URL (i.e. http://www.foo.com/pls/portal30 and http://www.foo.com/pls/portal309.

Two sap enterprise portal in the same server

Hi,
We have installed a SAP Enterprise Portal on a linux server, all ok!!. but now we want to install another SAP Portal in the same server with the same ehp and same sp, but diferent url, is it possible? and we have something in mind when we began to install it..
e.g. diferents ports or diferents database SID to avoid errors.
thankssss

Hi Carlos,
SAP Software in general is flexible regarding this requirement.
A SAP ID identifies the system, and the Instance ID is related to the Portnumbers that are used...
So lets say you have an:
- host called "linuxhost1" and
   - you installed a SAP system "AB1" and
      - the CI is 00 and SCS is 01
then you can install multiple additional installations for example
- host called "linuxhost1" and
   - you installed a SAP system "AB2" and
      - the CI is 02 and SCS is 03
etc etc..
As long as your host has enough resources you can fill it up...
The instance numbers you chose are reflected in the portnumbers. So in my example above the AB1 portal is called by http://linuxhost1:50000 and AB2 portal is called by http://linuxhost1:50200...
So in other words the instance number of the CI is used in the portnumber of the java instance (5NN00).
The above info is also spread among different SAP installation guides, and SAP help pages.
Cheers,
B

Ok to installing NW 7.1 Mobile on the same server as CRM 7.0?

Hi,
On a physical server (HP-UX), we have CRM 7.0 (basis 7.01 SP7) installed already (development system). Is it possible to install NW 7.1 Mobile on the same server (as sandbox)? Is there any issues that you see this might cause?
We will install the SUP and Relay server on a separate Linux box.
Thank you for any pointers,
-Serine

It's not advisable to run separate installations of
ColdFusion 7 and ColdFusion 8 single server on the same machine the
re are several services that will try to use the same ports.
However, you can install ColdFusion Enterprise using the
multi-server configuration and then deploy the J2EE versions of
ColdFusion to JRun. You can change the JVM that each instance uses
(we recommend the latest 1.4 for CF7 and the latest 1.6 for CF8),
and everything should run fine.
ColdFusion itself is essentially just a J2EE application, the
J2EE server itself is JRun 4. So the specific answer to your
question is "don't install 2 copies of JRun 4 to the same machine".
But yes, it's 100% possible, I'm running this configuration in my
own development environment.

How to Install R/3 and CRM on the same Server?

Hi All,
I would like to install R/3 and CRM on the same server (as the load is less). I know how to install them seperately.
I would like to have some instructions how to have them installed on the same server.
Thanks in advance.
Regards,
Vijay

As Sunil explained - MCOD (or) you can think to have 2 differnt DB SID's as weel 2 different SAP SID's. By default 1st Installation takes Listener Name as LISTENER & port 1527 when you are doing second Oracle installation use another lister name as LISTENER002 & give port 1526 ( for example).
MCOD will be the best option to unplug from oracle instalation requirement but - think of future plans. even it can be any size business don't think to do MCOD with SAP Business System like R3 .
Becuase qwe may have different requirements from the Business / functionla Team for refreshing / building the development system with a copy of production system - don;t get confused there are Techniques for Refreshing a Development Instance with production system also.
Any how you have to take decission to go with MCOD (or) not . I also request SUNIL to comment on MCOD installations with R3 system .
But I beleive Sascha Version is wrong - i can have multiple application servers of differnet products on single Box if my OS supports.
as application servers will have 3 individual mount point which points to different system
<Central Instance>:/sapmnt/<SID>/global
<Central Instance>:/sapmnt/<SID>/prfoile
<Central Instance>:/sapmnt/<SID>/exe
each SID NFS mount point can point to different sever & i can multiple application server of differnt SAP Products on 1 BOX.
Trans directory is problem - but it does not require either for installation (or) for runningAS instance .

Need to install CRM and ECC in same server

Hi Experts,
I want to install CRM and ECC server in a single server. (Win2003/MS SQL server)
I think we need more space (Sizing).
Apart from this, i have couple fo questions in my mind..
1,Which server should i install first.?
2,Does it use the same Database for both servers (CRM and ECC) installation?
3,I know that SID is differ for both server, does it use the same kernel for Both.
4, What are the dependent and independent files ?
5, How the database wil behave when i stop/start one server ?
Could someone help me the stpes.
Thanks and regards
Thirumal

1,Which server should i install first.?
Doesn't make any difference... you can start with either of them
2,Does it use the same Database for both servers (CRM and ECC) installation?
Yes, It will create separate instances on the DB.
3,I know that SID is differ for both server, does it use the same kernel for Both.
No.. they'll have separate kernel directories.
4, What are the dependent and independent files ?
Files will be all independant, beside the hosts and services files.. but sap wise everything should be under different SID's (as far as i remember)
5, How the database wil behave when i stop/start one server ?
You have to be carefull with this one... if you stop the DB it will affect both systems... so when stopping the system make sure you use stopsap/startsap r3
Regards
Juan

Installing two instances of the portal on the same server

Hello,
Our customer, wants a minimal version, and an enterprise version of the portal to be installed on the same server. We tried it but it doesn't work.
It is possible to install two versions on the same server?
Thanx,
Zsolt

Hope this is not a cluster. If it is not cluster, then you can have but make sure that both are different
SID id. You can have any number of multiple instances and there is no techincal issue in that.
I have, say X41 and X21 instances and both have thier own DB isntances..So both are independent.
Thansk
Prem

Issue with Web report interation on CRM Portal (7.0)

Hi,
System Landscape/Access route: CRM Portal (7.0) => One BI System (ABAP + JAVA = 7.3 SPS 5 Patch 3)
After we upgraded our dual SID One BI system (BI-ABAP + BI-JAVA) to 7.3 SPS 5 Patch level 3; the CRM Portal (version 7.0) which uses Application Integration iViews to launch One BI reports has following issues:
1. Buttons like Open, Save, etc. do not work
2. Drag-drop of characteristics from Free-Characteristics into report does not work.
These functionalities work for the same query if I copy the BI-Java stack URL in a separate internet browser. But the same query / URL does not work when rendered via the CRM Portal.
All these functionalities were working prior to the One BI upgrade. Can you please guide on how to fix this issue?
Thanks and regards,
Pratik

Hi,
Kindly confirm what was the earlier version of the One BI System (ABAP + Java), before it was upgraded.
Thanks,
Swapna Priya.

Two Communication Server in the same Server ?

Hi All,
do you know which are the steps and recommendations to install TWO Communication Station in the same server (Windows 2003) ?
The first one is connect to CRM develop system, and the second one to the CRM Quality System.
Regards,
Davide
[email protected]

Hello Davide,
Note 503340 is not valid for 5.0 and above but its major points are still true:
1. Only one default destination can be setup in the DCOM Connector
which is used by the mobile clients after the installation.
2. Only one default COM4ABAP instance can be setup on the
communication station. This COM4ABAP instance is started
automatically after reboot.
DCOM Connector is now .NET Connector and COM4ABAP is now NET4ABAP in 5.0 and higher.
Clearly, connecting to TWO (or more) CRM system has two parts:
a.) For Data Transfer with Conntrans. You can configure A SINGLE COMMSTATION INSTANCE to communicate with MULTIPLE destinations by just adding destinations in the QmtCnfg tool on the CommStation. You can then specify this Commstation and the destination value as you created in the QmtConfg tool on the client and data transfer will work.
b.) For changing passwords of Employees in Tx: SMOEAC. This uses the NET4ABAP service running on the CommStation which is called by the CRM Server. There can be ONLY ONE NET4ABAP service running on a CommStation and this connects to ONLY ONE CRM SYSTEM at a time. Hence it is not possible for one NET4ABAP service to serve multiple CRM systems.
If you need both a and b, it is not possible. If you need only a, it is possible and detailed above and also in the CommStation installation guide.
I also believe you have a message running with SAP Support on this same issue and you would have gotten the same details from them.
Best Regards,
Ankan

Two BOBJ on same server

Hello.
We use the such landspace:
2 GRC NW portals (7.0 EHP1) which are connected to 2 BOBJ portals (3.1 XI SP3 FixPack 3.3) on the same server.
First GRC portal with BOBJ (name BOE) is for development purposes. There are the DEV systems.
Second GRC portal with BOBJ (name BOP) is for productive purposes. There are the PROD systems.
I use the separate port numbers for BOP.
Working schema is: GRC portal takes and use Crystal reports from BOBJ. CR reports on BOBJ was published before from GRC.
No problem in DEV systems. GRC works correctly and successfully opens CR reports from BOE.
But in PROD system we have this problem: GRC couldn't opens CR reports from BOP.
Error message was occured:
Error in RAS Connction.
com.crystaldecisions.sdk.exception.SDKException$SecurityError: Unknown entitlement system: PRMCLNT200. Logon cannot proceed.
at com.crystaldecisions.sdk.plugin.authentication.sap.internal.SAPR3Error.ThrowException(Unknown Source)
     at com.crystaldecisions.sdk.plugin.authentication.sap.internal.SAPR3Authentication.startLogin(Unknown Source)
     at com.crystaldecisions.sdk.occa.security.internal.LogonService.doLogon(LogonService.java:337)
All settings in PROD systems is correctly and similar such as DEV.
SAP Authentication in BOP works correctly (Roles imported from ABAP GRC part).
I think problem occured because we use 2 BOBJ servers (BOE XI 3.1 SP3 FixPack 3.3) on same server. And we have some limitations therefore.
If I'm right, I have the questions.
Is there are some limitations during simultaneous work of two BOBJ systems on the same server?
regards,
Yessen Sypatayev

Hi Yessen,
This error message could occur if you removed any entitlement from your Prod server without removing the Roles associated with it. Let me know if that is the case.
Regards,
Nakul Mehta

Running Multiple Web Dispatchers On The Same Server

Is it possible to run multiple instances of Web Dispatcher on the same server? I want to have one instance pointing to my WAS 6.40 system and the other instance pointing to my BW system. I have set up two services on the NT server: One named the standard sapwebdisp.exe and the other named sapwebdispbw.exe. I am using two separate profile files, one for each instance. The services start O.K. However, when I attempt to access my BW system using the HTTP port as defined in the BW profile and the Web Dispatcher profile, I get a message back saying that "The server you are attempting to access has refused the connection with the gateway. This usually results from trying to connect to a service that is inactive on the server." I have double checked that the service is running and that the BW system is up and available.
Any help is appreciated.
Regards,
Doug

Hey guys,
it seems you are web dispatcher specialists
I have problems connecting even one server
I would like to add an Enterprise portal (DEP) to the web dispatcher.
My config file :
SAPSYSTEMNAME = SDM
SAPGLOBALHOST = webdispatch
SAPSYSTEM = 00
INSTANCE_NAME = W00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = 172.20.40.6
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120, EXTBIND=1, TIMEOUT=120, PROCTIMEOUT=120
Is it possible for you to paste your config file here ?
With explanation what the portal name is en waht the web dispatcher name is ?
The error I get :
no valid destination server available for '!ALL' rc=7
Where can I adjust this !ALL and !J2EE group ?
Where can I manage the /link/ ? (like /irj/portal)
If you need any info please let me know.
THank you for your time & help
BUD

How many connectors can be hosted on same server

We're looking into developing a connector for our CRM product by CRC. Can it be hosted on the same server as our Mobility connector, or do we need to deploy a 2nd DS server?
Thanks,
Bill

I would not put any other connectors on the same server as the Mobility/GroupWise connector. The Mobility connector requires a lot of dedicated server resources and adding another connector could really interfere with it and reduce Mobilities effectiveness and reliability. It would be better to have a second server for your CRM connector and any other connector you may want to play with.

Installing Mobile Repository Server DEV and QAS on same server

Hi,
i installed CRM Server 7.0 SR1 ABAP DEV and QAS on one server. Afterwards i installed the Communication Station DEV and QAS together on one server.
Now i want to install the Mobile Repository Server (MRS) for DEV and QAS on one server. For DEV i have installed it successfully. But i don't know how to install it for QAS on the same server.
The only answer i found is: Re: CRM Mobile installation
Here is written that one of the repository database ARS_DB needs to be renamed.
But my first question is:
Do i have to install the MS SQL Server 2005 again for the QAS system? Only a default instance is supported and not a named instance. Can i install a default instance twice?
What are the steps for installing the second MRS? Does anybody did it successfully?
It would be very nice if someone could help me.
I use SAP CRM Mobile 7.0 SP04 on Windows 2003 with MS SQL Server 2005 SP2.
Kind regards
Wolfgang

Hello
MRS requires SQL Server 2005. It is not possible to \have two MAR repositories with two default instances in a single machine.
Installation might not allow you or throw an error if you have more han one sql server defualt instance.
Instead, you can stll follow the either of the following approaches:
1. Use DEV MAR repositroy itself as a TST repository. It means, you will have one MAR for both DEV and TEST.You have to be cautious.
2. * First install the DEV MAR in one machine.
Configure DEV MAR to DEV CRM for transports.
Restore the TEST MAR DB in DEV MAR machine.
Also configure TEST MAR to TEST CRM server for Transports.
Approach 2 avoids the second time installation. You should have the TEST MAR repository to restore. this option woudl work:)
Best Regards
Shankar

BPS Layouts not displaying in the CRM Portal

HI Friends,
I have configured Layouts in the BPS, i added 0keyfg_flag in the layout and enahced the layout in the UPX_MNTN and in the CRM system maintain RFC destination and assigned planning profiles to planning profiles gropu also, all the steps i fallowed which are mentioned in the " How to integrate bps layouts in the CM portal". when i looked at in the crm UI i don't find the layouts diplayed in the CRM portal, but CRM UI recognizeing the BPS variables which are used in the BPS planning levels,
but i don't see the any layouts in the CRM front end, if anybody has any expericence please share your ideas, how to solve the issue.
Thanks
Best regards
SG

Hi SG,
Its good that you are able to assign the planning profiles created at bw end in CRM system to ur planning groups. But I am stuck here itself.
My problem is what ever the planning profile I had created in SEM BPS (BW System component version BW 7.,4) using BPS0 t-code, I am unable to retrieve the same in CRM system while trying to assign the same to the planning group.
At CRM end, In the below navigation i.e SPRO->CRM->Define Transaction types-> created & then while assigning the Planning profile in SEM Planning tab, I am unable to retrieve the ones I had created in BW-BPC (BW 7.4).
Could you pls let me know what I would be missing here.
We are in very beginning stage i.e testing the connections & communications for CRM & BI Integration, yet to start the configuration of TPM in CRM.
Thanks.

WAS 6.40 and EP6 on same server

Hi,
For the moment we have a WAS 6.20 on 1 server and a second server with EP6 sp2. We want to upgrade the WAS 6.20 to 6.40 and have the WAS 6.40 and EP6 on the same server to get back one of the 2 servers.
Is it possible and if yes what is better upgrade the WAS and install EP6 on the WAS and we can have the old EP6 server free or install WAS 6.40 on the samer server than EP6 repliacete or application from server WAS 6.20 and after kill 6.20 on the second server.
I hope I was clear.
Thanks for your help
Jean Christophe

Hi Jean Christophe,
I think I understand what you want to do. Unfortunately there is no "upgrade" from Web AS 6.20 to 6.40. It is a migration. You have to install a new version of Web AS 6.40 and then install the new version of the portal.
Not knowing how much content you have in your Web AS 6.20 system and your SP2 portal, I can't give a clear idea what would be the best way to do this.
Here is an approach. There are probably different variations. Install on one of the boxes the WebAS 6.40. and then the portal. Migrate the content from the system on the other box. (either the portal or the WebAS) that will free that box. Then migrate the other content from the same box and remove that system.
One hint when installing the second instance on the same box as the 6.20. Make sure you choose the "custom" install option rather than the "default". Custom will give you the option to change all the options on the install (like port numbers) so you don't run into conflicts with the 6.20 Web AS.
Good luck,
John

BI, CRM, Portal same server?

Similar Messages

Maybe you are looking for