BI7 ABAP+Java IDES Question (SSO); URGENT

Hi All:
I have installed an ABAPJavaEPEPCBI-Java usage type on one physical host. 1 SID (BID). I have set up all the SSO options as per the guid but am having some problems. Pre-cursor: The default UME client is (for 2004s installs) 001 and is so here. the default login client for IDES is 800 (I have it as such). J2ee-WAS has no client but for SSO they recommend setting it to nonexistisatant ABAP client, so I am using 990.
EP (990) [created the SSO certs & Exported] -> imported into ABAP 000 STRUSTSSO2. Added to ACL list (as client 990).
Question: must I log into 000,001,800 and add these to each ACL for each ABAP client? (So in 001, must my ACL be for the EP cert 990?)...must I repeat for each client?

Solved..contact me if you have the same

Similar Messages

SSO within an ABAP+JAVA on the same host

Experts:
We have a dual stack (ABAP+JAVA) NW04s on the same host.
The usage type EP7 is enabled.
From this EP7 we want to access its own ITS thru SSO.
We configured the SSO just like we did for the EP7 + ECC on 2 different hosts.
However, we are always asked for an ID/password when trying to test the SSO from the EP7.
The error is:
"SSO logon not possible; browser logon ticket cannot be accepted"
Please advise. Points guaranteed. Thanks!

hi,
I also tried to do the same, but i think it's not possible.
I read somewhere that SAP recommends to use different instances of ABAP and Java. I installed seperate ABAP and Java instances on the same host and then configured SSO using the Configuration Wizard in NWA configuration. and it works perfectly.
regards,
Ankur

SSO To J2EE engine of ABAP+JAVA Addin Install

Hi all,
I have setup an SAP system as a ABAPJAVA Addin Install. The system is running NW04s SP11. I have an SAP Portal installed on the JAVA side to support some BW functions. I would like to do SSO from the users desktop directly to the portal component. Is this possible with this type of install? I have setup Kerberos / SPNego with a JAVA only install connected to a Microsoft ADS. I have also configured the system to use MYSAPSSO2 tickets from another SAP system, but that requires the users to go to the other SAP system before going to ABAPJAVA Addin system. I would like the users to go directly to the ABAP+JAVA Addin system via a URL like http://server:port/irj/... and get single signed on to the system. Is this possible?
Any help is appreciated!
Russ Scherbarth

Hello Russ,
yes it is possible to configure SSO using SPNego Loginmodule (Kerberos) for this type of system as well. You also can use the SPNego configuration wizard to get the configuration work done, but you need to perform some manual follow up work as well.
So my recommendation is check the online documentation for wizard based configuration AND manual configuration, perform the wizard based configuration (more or less the same as you did for the other system) and afterwards (depending on your JDK) you might have to perform some manual follow up activities.
Select as user resolution mode prefixbased, the attribute to be used is uniquename. In addition you need to create the service user in the portal database (when using SUN JDK), as you do not have direct connection to Active Directory.
With best regards,
René

Question re: Java System vs. ABAP + Java System

Hello everyone,
I posted this message in the EP Implementation forum without realizing there is a dedicated WAS General forum; I apologize to those of you who might have read this already.
My question is;
Under what scenario would I want to install my Web Application Server as an ABAP + Java system?
We have been working with our development Portal server for a few months now with a high degree of success and the WAS Server it sits on is setup as a Java System only.
I understand that for Portals and using business packages in portal I only need Java WAS.
I guess I am only left with the question, when or why would I want to install the ABAP engine?
Would you use that for a different application that sits on WAS other than Portals?
Are there benefits in installing the ABAP engine that you do not have with a Java only system?
Thanks in advance for your help,
~Henry

Hi Henry,
Your ABAP stack in WAS server in nothing but your SAP R/3 System. In earlier versions only ABAP stack was available. But now SAP has combined both JAVA and ABAP stack into one. So, if anyone wants to work on both the things then they can you one single server only. No need to have different servers for that.
If your purpose solves with the only JAVA stack then you can continue with that. But, if you are going to install new server and you want to work on both ABAP as well as JAVA then better to install WAS 6.40 with ABAP+JAVA stack. So, single server will setisfy your whole requirement.
I hope you satistied with this answer.
Regards,
Bhavik

SAPINST: install IDES ECC6 EHP4 ABAP+JAVA (Windows 32 - Oracle)

Hi,
I have received the new IDES ECC6 EHP4 DVDs and I nedd to install a ABAP+JAVA instance.
It is not clear which option I have to choose in the SAPINST program.
In the past was present ERP2005 central instance. And now ?
Thank
Andrea

Hi Andrea,
As of SAP ERP 6.0 SR3, you must install an SAP ERP system only on 64-bit operating
systems.
For the dialog instance, you can still use a 32-bit operating system
As of SAP enhancement package 4 for SAP ERP 6.0, you can no longer install SAP
ERP dual stack (ABAP+Java) systems. If you want to use both SAP ERP ABAP and
Java Components in your system landscape, you have to proceed as follows:
1. Install a separate SAP ERP ABAP system.
2. Install a separate SAP ERP Java system.
3. Configure the connection of the SAP ERP Java system to the SAP ERP ABAP
back-end system
Hope this clarifies your concern!!!
Regards,
Rajesh

Question concerning homogenous system copy abap+java

Hi,
I have the following question: we are running a SAP ERP2005 und Linux/Oracle.
We need a restore of the productive system form an early date, due to problem analysis. Because this system copy was not planed we didn't do the java SDM dump (as described in the manual). We do have a backup of database and the library files. Is it possible to use this files for the system copy and do some postactivities to get a consistent abap+java system?
Regards
Ulrike Tubbesing

Hi,
You need to have the SDM folder backup and if to be more specific you need abckup of the sdmrepository.sdc file so the J2EE engine can function properly.
Regards.

Urgent Please........!!!! Java IDE

Can anyone tell Excellant JAVA IDE with Runtime Program Tracing

I've worked on Forte, JDeveloper, and JBuilder5 in the last month or so. All are free and all are similar enough that you can get started quite easily.
I never did manage to get debugging working properly on the latest Forte (on WIn98) but it was probably my fault,
JBuilder5 is the tops on my list. I think you have to pay for some of the nicer debugging options (member change breakpoints, member watches) but I could be wrong. One of the nicest environments I've ever worked in.

Mobile sales online installation for CRM5.0(ABAP+JAVA)

Hi ,
Client wanted to implement Mobile sales online for NW2004s component CRM5.0(ABAPJAVA) stack. We have already installed CRM5.0 with ABAPJAVA engine and EP7.0.Currently we are using EP with CRM5 using PCUIscreens. Also configured SSO(SAP logon ticket) between EP and CRM and BI7.0.
I found the document which says about NW04 instance CRM ABAP stack and need to install JAVA satck seperately then do SSO and deploy .sca files etc...but could not find for MSON on NW2004s using EP.
We have already integrated CRM5,BI7 with EP7.0 using SSO saplogon ticket,now my concern is
1. Do i need to use MSON configuration like SSO,SLD,deployment on existing CRM5.0 ABAP and Java engine , which is installed in one system ?
or
2. Can i use MSON config through CRM5.0 already integrated with EP7.0 ? which is already configured SSO and SLD etc..
Which method is recomended for Blackberry to communicate CRM5.0 system?
Any sugessions would be appriciated.
Thanks,
Shaik

any help will be appriciated.

SAP BW 7.4 on HANA ABAP & JAVA stack

Hello,
We have requirement for SAP BW 7.4 on HANA ABAP & JAVA stack integration.
Please clarify the doubts.
1. Is there any possibility to install ABAP & JAVA stack same SID?
2. If install different with SIDs, How can we do integration? Any restriction is there to integrate?
3. Can we use same HDB SID for both ABAP & JAVA stack?
4.We plan to configure the JAVA stack as UME data source from ABAP stack, Is it good practice?
Any one share the better ideas & solutions for this issue.
Regards,
V Srinivasan

Hi Experts,
Great for viewers.
But still expecting some ideas above questions kindly answer.
Also i got some important points.
Java Stack for BW on HANA
At least any one answer the purpose of BW Java Stack.
Regards,
V Srinivasan

ABAP+JAVA system copy using 3rd party export/import tools

Hi all,
I am trying to do a homogenous system copy. I am following the syscopy guide for SAP NW 7.0 SR3 ABAP+JAVA systems
We are running AIX 5.L and Oracle.
My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
I know it is possible to restore the database from an offline backup using BRTools rather than r3load and jload, and I just wanted to see if I can restore from a snap as it would save a lot of time in the procedure.
Any help or ideas would be much appreciated.
Thanks!

>My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
That approach is not supported.
The reason is: combined instances write the instance name and hostname in various places, on the filesystem in .properties files, in the JDBC configuration, depending on the java applications you run on top in various other places. What you're trying to do is effectively "renaming" an instance.
Technically it's possible to do it and to get it run, yes, but the supported way is running sapinst and choose ABAP + Java system copy. This will prevent you from lots of (not really documented) manual work after the copy.
Markus

ABAP+JAVA - Java-addon does not seem connected

Hi,
I messed around with this new system a month ago and now that I finally got back to it the JAVA part don't seem to be working or the SCS instance is not connected to the Central Instance.
The SCS instance seems to be running fine.
Some questions:
1. In t-code SM51, should you be seeing any reference to the SCS/JAVA instance?
2. The Central Instance number is 08. The SCS number is 10. So I should be able to connect to the java part by browsing to http://hostname:51000 or not? (I get a page cannot be displayed)
3. When I for example trying opening the Solution Manager Diagnostics from the SAPGui the Internet Explorer window that opens try to browse to http:/hostname:8008/xxxxxxxxx . Should it not go to port 51000?
4. Is it correct that the Default parameter rdisp/msserv_internal = 2008 and that the SCS instance one = 3910?
5. Any other advice or ideas on how I can troubleshoot this?
Many thanks!

Hi,
some answers:
1. No
2. no. On the Java SCS only Java Message Server and Java Enqeue Server are running. Try http:/host:8108/msgserver you should get an answer from the Java Message Server because its http port is 81$$
3. not neccesaryl. In an ABAP+Java System the ICM distributes HTTP request between ABAP and Java world. 80$$ is the default http port if ICM. Without any URL prefix the ICM should redirect to the Java Dispatcher. When the URL has a prefix starting with sap, e.g. http://host:8008/sap/public/info its going to the ABAP side.
4. you find default ports at http://service.sap.com/security > Security in Details > Infrastructure. There should be a pdf called TCP/IP ports used by SAP software or something similar.
5. what do you want to troubleshoot? Everything seems to be fine
Regards,
Sascha

ABAP+JAVA Add In Licensing

Hi Friends I had installed an ABAP system and then applied the license using SLICENSE for the ABAP engine only, after that I installed JAVA add in, I didnt install any license later as I had read that JAVA Add in doesnt require ny separte license only a Standalone JAVA system needs a separate license, but I find that after every 30 days or so my JAVA Engine crashes, Ny Idea people?

Hi Karan,
For ABAP+JAVA installation normally only one license key is needed and is called standard license key.
However in you case since add on was done after licensing was done you need to get a new license.
Java Add on can be classified as kind of upgrade and hence new license is needed.
Please check the following links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a7/512c6e407a11d1893b0000e8323c4f/frameset.htm
https://websmp207.sap-ag.de/licensekey
In the second link check frequently asked questions.
Here it is stated :
Under what circumstances do I have to request a license key for an existing system?
In the case of a hardware change, database change, upgrade or expiration date change.
Please award points for useful info.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

CRM (Abap + Java) connect with WAS (Abap + Java)

Hello collegues,
i have installed Netweaver 7.0 with Enterprise Portal.
Now i must connect
WAS with CRM system, but i do not what i have to connect ABAP - ABAP parts (RFC connection type TCP) or Java - Java parts (in visual admin in JCo) or ABAP - Java ( no idea how)? Which users are using for?
The second task -
i have tryed to create some user in portal but got message "error in persistence"?
In useradmin in EP i saw that standart users from R/3 Abap are there. May be i fogot to set something after installation?
Thank you very much for any idea.
Julia

Hi Julia,
for CRM you don't need to "connect" the Portal (Java) with the CRM (ABAP) system.
It is "just":
- import of the CRM Business Package
- definition of a system in the portal pointing to the CRM
- setup of SSO (if you want SSO)
The error with the persistance:
You already have connected the Java UME to the ABAP system. In the ABAP you have a user called "SAPJSF" - this user has only read permission on the users. You have to assign another role to that user: SAP_BC_JSF_COMMUNICATION instead of SAP_BC_JSF_COMMUNICATION_RO
Hth,
Michael

Error in Wily Introcope Agent Configuration (ABAP+JAVA)

Hello,
When i try to configure the wily introscope agent for a system ABAP+JAVA, i get the error:
"J9 was detected, Operation bas been aborted because some files are missing, please fill the property com.wily.autoprobe.prependToJVMRuntimePath in the agelet com.sap.smd.agent.application.wily - com.sap.smd.vm.J9PreprendPathNotFoundException: /opt/IBMJava2-amd64-142/jre/bin/j9vm/jclSC14/classes.zip:/opt/IBMJava2-amd64-142/jre/lib/jclSC14/classes.zip"
I don't find the classes.zip file in any location...
Any of you have any idea about this issue?
Thanks in advance
Carlos

Hello,
When i executed that commadn i get, and java -version, i get:
servssm:ssmadm 1> whereis java
java: /usr/bin/java /etc/java /usr/lib/java /usr/share/java /opt/IBMJava2-amd64-142/bin/java
servssm:ssmadm 2> java -version
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.2)
IBM J9SE VM (build 2.2, J2RE 1.4.2 IBM J9 2.2 Linux amd64-64 j9xa64142ifx-20070808 (JIT enabled)
J9VM - 20070807_1500_LHdSMr
JIT - r7_level20070315_1745)
The question is that there is not classes.zip file in any folder...
Any idea?
Thanks in advance
Carlos

In ABAP+Java system installation

Hi,
I installed ABAP+Java system On that i installed XI 3.0 SR1.I after applying the J2EERTOS11_0-20000118.SAR patch on J2EE engine.This patch consist of lot of bugs.I just stopped the installation of patch.After again when i log on to J2EE engine with port 50000.Its showing no page dispaly on localhost.I checked the J2EE instance.J2EE instance running properly.Even i can't log in to SDM and J2EE administartor.
Before patching I can able to log in.But now its loging failing.
May be the error is at 50000 port.I installed everything on one Central instance.
Need urgent reply.

Hello,
i think that you want to patch your j2ee-server. Therefore you have to download four parts for PATCH SP11.
Support Packages and Patches > SAP NetWeaver > SAP NETWEAVER SAP NETWEAVER 04 > Java Server:
J2EERT11_0-10001982.SAR (Part 4/4)
SAPINST10_0-20000118.SAR
J2EERTOS11_0-20000118.SAR
CTRL<database>11_0-20000118.sar
You have to download all these files and extract then in one folder - there you have to use the sapinst and install the patch.
I hope i understood your requirement the right way.
Regards,
Andr'e

BI7 ABAP+Java IDES Question (SSO); URGENT

Similar Messages

Maybe you are looking for