Billing Document Change history

Hi,
Is there any t code or programme availiable for the view of billing document change history.
suresh

Dear Suresh,
Through VF02 transaction itself you can find the changes involved in the billing document.
Go to VF02 transaction enter billing document number to which you want to check the changes then go Menu>Environment>Click on changes now system will take you the Display changes screen here you give the options then execute.
I hope this will help you,
Regards,
Murali.

Similar Messages

  • Document changes history table

    Hi,
    Is there any table which is having document changes history (Old and new).
    Thanks in advance for your help.

    Hi,
    If you succeed to see the changes via FB03 transactions and cannot view them in the tables, then your selection parameters are incorrect. To see the right parameters, you can activate the trace (via ST05) and view changes via FB03 for one document. Then, by checking the trace you will see what you enter wrong when you select data from the table.
    Alternatively, use S_ALR_87012293 report for mass view of changed documents.
    Regards,
    Eli

  • Billing document without history not posted

    Hi all,
    i have folowing problem:
    1. Billing document is posted in previous period (period is closed)
    2. Users have canceled billing document in current period but with wrong date and canceled billing document is in VFX3
    3. Users have canceled goods issue, deleted delivery and sales order (canceled billing document is still in VFX3, they have not released it yet)
    4. After deletion od documents, they try to release document and system reports different errors (no entry in Lips .... )
    Are there any solution of this proem?
    Thanks

    Hi Uros
    Ideally even if the delivery and the order is deleted your cancellation of billing document should be released to accounting properly with the standard settings. Just a guess that you have certain user exit being called on saving your invoice document that tries to reference LIPS (delivery line item)- while calling saving document through VF03.
    Now to get ahead with this problem the following steps should be followed:
    1. Firstly the original invoice is still not reveresed from an accounting point of view and you cannot use the cancellation invoice to do it because of the LIPS check. So best would be to manually ask your accounting team to post the reversal entries.
    2. Secondly the cancellation document would keep showing in VFX3. From a SOX compliance persepctive you have a reason that you can justify what is wrong with this. In case you want to remove it completely you have no other option than to debug and change the contents of the field VBRK-RFBSK from blank to C. Its better you consult your system SOX team before doing this step.
    Thanks
    Indranil

  • BAPI: BAPI_SALESORDER_CHANGE - Document Change History

    Hi ,
    When I change a Sales Order usingthe BAPI: BAPI_SALESORDER_CHANGE, will it create the change history for the document?
    Appreciate Your help.
    Thanks,
    Kannan.

    Transaction is SCDO and look at object called VERKBELEG
    Check the below link :
    http://help.sap.com/saphelp_nw04s/helpdata/en/c7/69bccff36611d3a6510000e835363f/content.htm
    Thanks
    Seshu

  • Enhancement - Accounting Document from Billing Document - change line items

    Hi Experts,
           Our client has a requirement to display all line items(as shown in Billing document) along with the tax line in the Accounting document. I can explain it as below:
          In VF01 transaction code: enter the delivery number.
          Press enter to see the number of line items that will be populated in the Billing document.
          Click on save.
          Here in the Accounting Doc you'll find only 2 line items, one line item is the consolidation of WRBTR and quatity of all the line items in the Billing Document and the other line item is the tax.
          We are required to replace the consolidated line item in the Account Doc with all the actual lines as populated in the Billing Document.
          For this we tried various methods:
                 Searched for a BAPI - couldnt find any which will help in modifying the line items before creation of Account Doc
                 Checked UserExits - Found one SDVFX008 but it didnt have the table which is sent for population of Accounting doc hence there was no way we could modify any table to get the desired output.
                 Searched the VF01 Flow in Debugger to check when the Accounting Doc is updated, but it also didnt yield any fruits.
          Kindly please guide on a way this can be accomplished. Appreciate the help from you all...

    Hi
    I think that your requirement is related with summarization of items in the FI doc for the billing document. Please, see SAP Note 36353 - AC interface: Summarizing FI documents. See also Note 301077 - User exits for the interface to accounting.
    I hope this helps you
    Regards
    Eduardo

  • Change History of Material master classification data

    Dear all.
    How can we see the change history of the Material master classification data.
    Whether any standard report exists which can give this Change History data or whether we can find from  any tables?
    Please let me know your thoughts on this
    Regards
    Shyam

    changes in values for a characteristic can be monitored in CL20N via menu Environment > Change documents
    change history for classification is only stored if you activated this.
    if  it is not set active in your system, then see SAP Note 943559 - FAQ: Frequently asked questions about the classifctn. system
    it has instruction how to active it.

  • BOM document item change history

    I am trying to find an efficient way to track change history of Bill of Material structure for documents, especially deletions of BOM structure components. I found an SAP table called STAS which contains Bill of Material Number, its component counter number and a deletion indicator, but not the <b>document numbers</b> of the BOM parent document and BOM component document. Is there a database table that contains all this information (BOM #, component counter #, BOM parent document #, BOM component document #, as well as the change date)?

    Not sure ,there may be two reasons 1,He might have deleted accedentally adn lateyer he forgot or his id might using his group team to chage data when his absence.If system noted his user id and time some might have used his id.Check with basis time they might have user entries that time how many times the user id used that time .

  • Do you know how to change the Text Object for Billing Document?

    Hi,
    If you execute Transaction VOTX or VOTXn it will take you to Text Determination. The Billing Doc & Sales Document both has the VBBK as Text Object for me and is it like that for all.
    I need to change the Text Object to VBRK for Billing Doc, which is the ideal because I am using the Function Module READ_TEXT to retrieve text. This work perfectly for Sales Document which has VBBK as Text Object, but does not work for Billing Doc where it through as error message saying “Text 0020000021 ID 0002 language EN not found”.
    Thank You
    Kishan

    Hi kishan,
    For updating these text you can use FM 'SAVE_TEXT'.
    As for your problem, to get the parameter you need, go to the billing document, go to the text, and display it in plain page mode.
    Then you do 'GO TO' -> 'HEADER', and a pop-up window open with the parameters you need Obect type, ID, Name, ...
    Regards,
    Erwan.

  • Change of Tax Percentage in Existing Billing documents

    Hi,
    we have created 100's of billing documents with 11% to customers. Later we realized that we should charge them 0% instead of 11%. we have even released them to accounting however we did not receive the payment yet. I made changes so that any billing docs created from today will have 0% percent but my client wants to re-issue all the previous invoices to customers with 0%. I have not worked on any of these but i have few thoughts
    1) Reverse the Accounting Document and Billing document and update the condition type to 0% and re-issue the billing document
    2) There is something called Invoice correction document which issues something like credit or debit memo for the changes in Billing document.
    3) create a utility program to mass change all the billing documents.
    4) I am not sure about this but how about issuing a credit note and then re-issue the invoice but not sure how to re-issue with the modifications in Tax Percentage
    Could you please throw some expert opinions on the above or any other options of consider. Also please advise on configuration settings for any needed.
    Since I have not worked on any of the four, I could not recommend my client about this but needed opinion before actually recommending.

    Hi,
    What you said is right with respect to retrospective billiing.
    In case of credit note, you are not issuing your invoice again. You are just releasing a credit note with respect to the issued invoice. Hence a reference is maintained between these two. This is the best way to follow.
    Raghu

  • Unable to change "Ship-To" in Billing Document

    Hi Experts!
    I have a billing document that has already been released to accounting and cleared, however the "ship-to" address is incorrect.  Is there anyway I can change the ship-to in this billing document?  VF02, XD02 did not do anything for me.  Awaiting your response.  Thank you for your time!
    WC

    why would you want to change ship-to address in the invoice doc. after it's posted to accounting already ?
    if your address is incorrect in the order/delivery - means you may have shipped your goods to wrong address :o)  besides you may have incorrect taxes if they are dependent on address.
    If you are sure your new address is not going to impact taxes -> you can change it directly in ADRC table using ADRNR of your ship-to from invoice/order.
    NOTE: if your ship-to address was nto changed in sales order -> means you have same address as in customer master... it may be enough to just update customer master address.

  • How to see the change logs for billing document

    Dears,
    Could you please how to see the change logs for billing document.
    My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
    Thanks in advance
    Ranjan

    hello, friend.
    you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes.  try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
    normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document,  as saving the document after creation will post this to Accounting.  of course, inclusion of a posting block in the billing type will provide you the opportunity for changes. 
    regards.

  • USER EXIT/ BADI (The price should not be changed in the billing document)

    Hi all,
    We have given manual entry provision for pricing in Sales order level. But as per the company requirement, the price should not be changed in the billing document. Also the point to be considered is, it is a delivery based billing. 
    Kindly help me for finding USER EXIT/ BADI to achieve my requirement.
    Thanks.

    Hi,
    Please refer to OSS notes:
    105621 - Authorization check for the condition screen - you can use following user-exit includes for changing the condition tab to display only:
        USEREXIT_FIELD_MODIFICATION
        USEREXIT_PRICING_CHECK
        USEREXIT_FIELD_MODIFIC_LEER
        USEREXIT_FIELD_MODIFIC_KZWI
        USEREXIT_FIELD_MODIFIC_KOPF
    1165078 - Authorization check for conditions or subtotals - from ECC6.0 EHP4 there is a dedicated BAdI for authorization check, however if the user is not aurhorized to change the conditions, the conditions are not visible for the user as well.
    Regards,
    Marcin

  • Partner change in Billing document.

    Hello all,
    I have a user exit to change Partner in Billing document. That is EXIT_SAPLV09A_004.
    This user exit is updating partner only when I create billing document with reference to PO, if I create billing document with reference to SO it is not getting triggered at all.
    Please suggest in case if you find or have or used any BADI or User exit or Enhancement point to change Billing documents (in VF01) partner when we are creating it with reference to Sales order's outbound delivery.
    How I am trying?
    - I am creating Billing document in VF01.
    - I am creating Purchase Req (in ME51) -> Create PO ME21N -> Out bound delivery in VL10B -> Billing.
       I am creating Sales order VA01 -> Out bound delivery in VL10A -> Billing in VF01.
    Thanks in Advance.
    Mohan Vamsi

    Hi Mohan,
    Could you please tell us how you resolved it?
    I am also having the same requirement and the EXIT_SAPLV09A_004 does not get triggered.
    Thanks
    Ajith  C

  • Billing document - Baseline date change status

    Hi folks,
    I have the following issue with the baseline date for the billing documents.
    Billing date proposed by the systems based on the goods issue is 30.01.2010 while the date of creation of document is 31.01.2010. In FB03 transaction baseline date status is showing as changed from 30.01.2010 to 31.01.2010. Following is the setting done: In OBB8 for the said payment terms the baseline date shown is the "posting date' and in VTFL item level copy control
    it is defined as "Data VBRK/VBRP         007  Inv.Split (Rec/Div)".
    Why is the baseline date getting changed by the way  User is entering the bill of lading in the outbound delivery >Header>Shipment (on 31.01.2010)..not sure if this is in any way contributing to the baseline date change...Appreciate your reply.
    cheers
    Joseph

    Baseline date is generally governed by config in OBB8 but we can influence it by writing code in USEREXIT_FILL_VBRK_VBRP. This will obviously affect baseline date in billing docs. The same should get copied into the accounting document. Now the catch is if the accounting document is changed (e.g. Payment terms) then system will populate baseline date as per the config.
    So may be you should check if there is anything in the userexit and whether accounting document was changed.

  • How to change billing date in S1 - cancellation billing document

    Dear Friends,
    Could you please tell How to change billing date in S1 - cancellation billing document which is even not released to accounting & in gray mode.
    Is it possible?
    Thanks in advance.
    Ranjan

    Dear,
    Thanks for asking exact problem.
    1. PGI in 2008
    2. F2 Billing date in 2003 ( By mistake by the user)
    3. S1 Billing date in 2008
    4. PGI reverse in 2008 & OBD deleted in 2008
    So reduced billing qty is shown in report in 2008 because of S1 Billing date in 2008,
    Billing qty  is not matching with the actual PGI quantity.
    So here if the cancellation billing document S1 could be changed for billing date in 2008, then you could balance it
    Now my issue is how to balance it.
    hope you find it it very interesting
    Awaiting your response.
    Ranjan

Maybe you are looking for