Billing / No Accounting Generated

Hi Guys,
We have raised a Credit Memo using ( VF01 ) and the corresponding accounting entry has not been generated.
When i click on the accounting it says " The accounting document has not yet been created ".
I went to environment to see the document flow and the sequence is a "
Service order ->
Deb Memo Request ->
Deb Memo ->
Credit Memo Req->
Credit Memo ".
The status of all the above documents are Completed except for the Last Credit Memo whose status is " Open ".
I think its because of this open status , the Accounting documents are not generated.
Why is the status open even though the Credit Memo document has been created and how to post the Accounting document for this Credit Memo.
Thanks,
Srikanth.

Hi Sriku,
Go to VF02 and Click on Release to Accounting Flag (Shift + F4).
Check If any Error comes
Regards,
Kishore K

Similar Messages

  • After cancelling the  billing document accounting document not generated

    hi,
    we released the billing and accounting document generated but customer needed changes in the billing values so we cancel the billing document but accounting document not generated(reversal accounting not happen)....in document flow it shows in cancel document in blocking state ....we try to release in VF02 but it throws the error "Client 200 does not contain an active application area" . but the other sales order we test in qulaity server the scenorio is working fine...............for specific one sales order creating problem now.....
    try to solve the issue ..
    Thanks
    Muthuraman.D

    Dear all,
    I have noticed this problem in my company system.
    Problem descripion:
    - you creates an invoice and the system doesn't post it for any reason
    - then you create the cancel of the invoice, BEFORE forcing the posting of the invoice
    --> user creates Cancel, Cancel is not posted as well.
    --> from now it is impossible to post both invoices: if you try to post the Invoice after the cancel creation, the VF02 recongnise that a CANCEL exists and do not allow for the posting
    --> standard VFX3 doesn't signal this kind of not posted documents situation.
    Ok, The right procedure for thes user should be: create invoice, if not posted then try to understand why not posted, and not CANCEL it.
    But in this case VFK3 was not able to detect the invoice was not posted: it was not in the list.
    So the 2 ways must be:
    1) one possibility could be undestand in VFX3 could be enhanced: I checked in OSS but I didn't find anything.
    2) other possibility: add a further check in interface between SD and FI in order to check if original invoice is not posted to FI  and in this case block the cancel creation, as instead standard SAP does.
    Could you please give me an idea on how it would be better proceed?
    Thank You very much.
    Raffaella

  • COPA document not generated though after billing and accounting generations

    I have an issue with one instant.
    For some reason COPA document is not generated even though billing and accounting document were created. Found no errors in simulation using KE4ST. The billing item details has all the PA segment characteristics.
    COPA documents were created for entries made befor and after this particular one.
    Also we have COPA documents for the product with the same customer and different customers.
    Our system is 'SAP ERP Central Component 5.0'

    Thanks Ajay for the quick response.
    Cost element category is correctly maintained.
    Condition types are mapped.
    COPA is in use for more than 4 years.
    Able to simulate COPA document for the Billing document without errors.
    We do have COPA documents created before and after this particular transaction.
    As you said raising OSS message with SAP.
    Thanks

  • Billing docs are generated but not account docs

    Hi
    Today I got a ticket which says billing docs are generated but not accounting docs. I went to vf05 and found that it is indeed true. accounting doc was not generated for one of the billing doc. How can I what went wrong and how to solve this.
    Will reward suitably. Plz help.
    Thanks

    Hope SD-FI integration is not properly maintained.
    This can be one of the reason. if the problem is related to GL account determination maintain it in VKOA.
    Assign points if useful
    Regards
    Raghu Ram

  • Transfer SGTXT from Billing to Accounting

    Hi All,
    Here we have a requirement like we need a text field(length more than 40 char) in VF01 transaction to enter Narration and that should be copied to SGTXT(Itemtext) field of corresponding accounting document.
    Presently we are using one long text at billing header level for narration but users are asking now this should be copied to accounting.
    I have checked all the available user-exits(like SDVFX0*) but couldn't find any exit for copying long text to SGTXT field and i could not use any other field in VBRK table for narration as length is more than 40 char.
    If anybody have an idea on SD-FI interface please guide me how to go ahead in this case.
    Thanks,
    Ashwin.

    HI gabriel,
    Thanks for your reply.
    but here me requirement is copy the long text from billing to accounting, to read the long text of billing we need the billing document number, but all those EXITS are getting triggered before billing no. is generated.
    I need one user exit where i can pass some fields to accounting interface and it has to be triggered after billing number generation.
    Thanks,
    Ashwin

  • Billing Document not generated.....

    Hi Gurus,
    When i am creating a Billing Document VF01....after completion of VL01n...the system shows an error Billing Document not generated...
    Please help me
    Rewards will be given

    To resolve the error, you can analyze account determination in the billing document. Process:
    Goto T.Code: VF02 & Enter Invoice number
    Next (On the top most strip) goto Environment
    Next (Select Environment) go to Account determination
    Next (In Account Determination) select Revenue Account Determination (first option)
    This will list all the condition types in the Billing document & analyze each condition & check for which G/L accounts is not determined.
    Possible errors:
    1. VKOA not maintained for required combination
    Solution: Maintain the combination in VKOA.
    2. Account Assignment of Customer / material not maintained in Customer / Material Master (If maintained in combination in VKOA).
    Solution:
    Option 1 (Standard solution):
    step 1: Cancel Billing Document --> Reverse PGI --> cancel Delivery --> Cancel Sales Order
    step 2: Maintain Customer master / Material Master correctly.
    step 3: Recreate sales Order --> Delivery --> PGI --> Invoicing.
    Option 2:
    Force the Account Assignment Group of Customer / Material through Debug in change mode of Billing document, which will release Billing Document to Accounting.
    3. Account Key not maintained in Pricing Procedure:
    Impact: This may create accounting document, but if condition type, which are to be posted to account, but do not have account key maintained in pricing procedure, it will not be post the relevant condition type to G/L account.
    From FI Side, you require to check that all the G/L account has been maintained through T.Code: FS00. G/L account being Master data has to be created in each client ot uploaded through LSMW / SCATT / BDC.
    In Billing Document in change mode (in the first screen where we enter Billing Document number), on the top most left hand corner, take a dropdown on Billing Document & select Release to accounting. Here you can get the under mentioned possible message:
    1. G/L account not found
    2. Cost Element not maintained for G/L account.
    In both the above cases, FI consultant requires to take corrective action.
    Regards,
    Rajesh Banka
    Reward suitable points.
    How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

  • Third party billing document ,''account determination error ''

    hi,
    i got problem, After creating the billing document, account determination error is coming.
    Please help,
    thanks

    Hi,
    Go to OB40 and assign you account to your combination if its not there.
    It should be assigned to your chart of account number and sales organization.
    Just do these setting and go to VF02 and press the green flag after giving you billing document number.
    If everything is right then accounting document will be generated.
    Otherwise some error will pop out then post that error over here.
    Regards
    Raj.

  • User exit trigerred after billing document is generated

    The objective is to set the Sales Order Item Level System Status. Using a line item that is created in VA01, I have to create a reference item in VA02. For both the line items created I have to generate billing document in VF01. After the billing document is created (when I give save in VF01), using the billing document number I have to set the Billing and delivery system status to completed.
    The functional specification provided me with a user exit USEREXIT_NUMBER_RANGE in RV60AFZZ. But the exit is getting triggered before the billing document number is generated. So I am unable to set the status.  Can you suggest me a user exit that would be triggered after the billing document is generated?

    if your invoice is relevant for accounting posting - you may use one of SD/FI exits (check RV_ACCOUNTING_DOCUMENT_CREATE and search for call customer-function).
    OR you may define new output type for your invoice and put your logic there, nast-objkey will have invoice number.

  • Link between billing and accounting documents

    Hi Friends,
    After creating the billing document, automatically acctg document will generate.
    How the acconting document is generating?
    Where we give the link between these number ranges?
    help me
    Thanks in advance

    Hi Raja,
    In SAP as soon as you run the billing transaction accounting document is generated along with billing creation. In transaction VKOA (FI-SD Integration) you determine the revenue GL account created in FI with the help of "AcctDetermProc." which is usually KOFI00. In this procedure there is a condition type of KOFI for revenue account. And this "AcctDetermProc."  KOFI00 is mapped in the Billing Document Type in
    transaction VOFA. under account assignment/pricing tab.
    And number range for the billing document type is maintained in VN01. Both FI number range and SD number ranges have same interval. so that both billing document and accounting document receive same number.
    Moreover, there is an "Account Key" for the revenue account aligned to condition type KOFI and same account key is mapped to the pricing procedure in order to maintain the stability.
    might help you......................................

  • Not getting MY iPhone 6 Plus I ordered on 9/12. seems that if you Billed to Account, they pulled the entire purchase price from any credit/debit card that you used to purchase the phone. Well in my case, the order didn't go thru because the payment method

    Have you gotten your iPhone 6 Plus you pre-ordered on 9/12?? I'm still waiting...till the end of OCTOBER! Because, I billed half to my account, as the system LET me do this and the other half to my debit card. Well they tried to take out the FULL PURCHASE PRICE on 9/23. It didn't go thru and they cancelled the order! I NEVER GOT ANY EMAIL from Verizon! I called this evening to find out the status of my order. Was told that since the device is on backorder, I cannot Bill to Account!!!! I am BEYOND LIVID! I realize that it's "JUST A PHONE' BUT, I should have had my device by Friday! NOW, I have to wait another month at best. I do NOT have credit cards and since this phone is on backorder, will have to wait another week before I can order it and by that time, it'll be CHRISTMAS before I can order a phone. Who knows, I may just save that money and CANCEL EVERY SINGLE LINE on my account. Three will be Month to month so NO ETF's with those lines!

    its a bunch of **. they charged my credit card on sunday, my status still says no payment, no tracking #, they told me my phone was going to ship monday and I've gotten a different story every day since. today they told me they shipped out all the phones and are waiting for more to come in...blah blah blah. i ordered on 9/12 and my friend that ordered the same exact phone on 9/19 got his on tuesday and laughed at me for preordering. I'm very frustrated!

  • Validation required so that invoice, billing and accounting is done on same

    Validation required so that invoice, billing and accounting is done on same date as the PGI date. Very urgent please help.
    Please look into the below scenario.
    Excise invoice posting date u2013 07.10.2011
    A/c doc posting date u2013 29.09.2011
    Reflecting in dispatch report of 07.10.2011.
    GL affecting in the month of Sep.
    So it want that on PGI date, billing , invoice and accounting enteries are created

    Dear Jalaj001,
    PGI date will be taken by system as the billing date in VF01 unless the user manually changes it.
    Accounting Posting date can be controlled by settings for document type RV.
    For excise invoice creation and posting date, i think you will have to use EXITs.
    But i am not sure and will leave it for the experts to comment upon.
    Thanks & Regards,
    Hegal K Charles

  • Getting Error while posting billing into accounting.

    Hi All,
    Could any one help on this error,i am getting this while posting billing into accounting.
    Tax statement item missing for tax code O0
    Message no. FF805
    Diagnosis
    No tax item exists for tax code O0 in a G/L account item. A possible cause is an incorrect transfer of parameters by the application to the Accounting interface.
    Procedure
    Enter an OSS message.

    Hi Raja,
    We have many FF805 errors reported by customers and the same solution
    has resolved the problem. Please note that the SD-FI interface changed
    from earlier releases.
    In the vast majority of cases, error FF805 occurs because of an error
    in your pricing procedure. The previously attached note 112609 explains
    in detail how tax codes are transfered to conditions.
    The note 400766 explains the checks performed by the system on the Tax
    codes:
    1. system checks whether there is a revenue line for each tax line.
    2. in the reverse case, for each revenue line containing a certain
       tax indicator there must be a tax line with this indicator.
    If the tax condition has condition value zero and condition base
    value zero, then it is not transferred to FI.
    If you have revenue lines containing a tax indicator XX, but no
    tax line with tax indicator XX, then the error FF805 issues, and
    it is justified. => Please check these informations. I have attached
    notes for further information.
    -> EXAMPLE
       If tax condition MWST has base amount zero and value zero; for this
       reason it is not passed to accounting. But, according to the
       criteria reported by note 112609, its tax indicator EG: A7
       has been assigned to the condition EG: ZBR1.
       So in accounting there would be a revenue line with tax indicator A7,
       but there isn't any tax line with indicator A7 (because MWST doesn't
       pass to FI). The note 400766 states situation is unallowed, and error
       FF805 is justified.
    Thanks and best regards,
    Smile

  • Error when releasing billing to accounting document

    Why we tried to release the billing to accounting document. There is the below error.
    Could someone please kindly help?
    Message Identification: F5
    System Message Number: 358
    Output type: E
    The Diagnosis is 'This document refers to a document which contains an invoice reference.
    The Procedure is 'Enter a different document as the invoice reference'.
    Thanks,

    You might be creating the billing document for a flow where there might be original invoice and/or credit memo also.
    So check that the original invoice and/or credit memo has an invoice reference to itself (i.e. the invoice reference = the accounting document number) than there is an incorrect referencing.
    Remove this reference via FB02 in the original invoice and/or credit memo and it should work
    Regards,
    Gaurav

  • Error when releasing billing to Accounting

    Hi All,
    I get the following error when releasing the billing to accounting in T-code VFX3....
    Tax code   in procedure TAXSL is invalid
    Message no. FICORE704
    Diagnosis
    The tax code entered is not defined in the country for this company code.
    System Response
    Procedure
    Check and, if necessary, correct the entry.
    Procedure for System Administration
    If it is not an input error, check and possibly change the system settings.
    To do this, choose Maintain entries (F5).
    1. Check whether the required tax determination procedure is assigned to the relevant country. the Procedure field is in the detail screen.
    2. Create a new tax code if required
    Pls note that in the error message it does not mention a particular tax code which is invalid, it jus shows tax code   in procedure TAXSL is invalid.
    I have done the following customization both in FI and SD.
    I have maintained condition record MWST both in FI and SD. Maintained all necessary tax codes in FTXP.
    Note that in the billing, we enter the condition type MWST in the Header Level and enter the relevant percentage manually. According to my understanding since the condition is maintained at header level there is no need of maintaining condition records through T-Code VK11.Therefore the tax code is not picked from the condition record as its not maintained in the item level.
    Pls advice me on how to overcome this error ASAP since its critical.
    Thanks in Advance,
    Maleeq

    Hi,
    Yes I have maintained tax codes in FTXP. but the error message shows that "tax code __ is missing in tax procedure TAXSL". To my knowledge it is not possible to create a tax code "blank"!!!!
    I have not maintained condition records in VK11 as we maintain the MWST condition in the Header level. Condition records are picked only from ITEM level and NOT from HEADER level.
    Maleeq

  • ITunes is billing my account for my purchases, but I am no longer receiving a receipt in my email........does anyone know why ? Or how I can get this fixed ?

    iTunes is billing my account for my purchases, but I am no longer receiving a receipt in my email, why is this ? And how do I get it fixed ?

    Hello, here's the fix I think...
    I think they're slowly nudging people to switch, .mac & MobileMe are going away about July, may as well set it up now.
    I understand .mac mail will still come through.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    IMAP (Incoming Mail Server) information:
    • Server name: imap.mail.me.com
    • SSL Required: Yes
    • Port: 993
    • Username: [email protected] (use your @me.com address from your iCloud account)
    • Password: Your iCloud password
    SMTP (outgoing mail server) information:
    • Server name: smtp.mail.me.com
    • SSL Required: Yes
    • Port: 587
    • SMTP Authentication Required: Yes
    • Username: [email protected] (use your @me.com address from your iCloud account)
    • Password: Your iCloud password

Maybe you are looking for