Billing plan values

30.05.2008
Hi friends,
I have created a credit memo request with reference to a billing document. In the copying control I have selected 'D' Copy pricing elements unchanged, but i find the billing plan values in the order created is different than in the billing document. Any clues please.
Regards,
udaynath.

Hi,
Check if you have any subroutines VOFM (no standard,ie: client development) in your pricing procedure.
I hope this helps you,
Regards,
Eduardo
Edited by: Eduardo Hinojosa on May 30, 2008 3:43 PM
Edited by: Eduardo Hinojosa on May 30, 2008 3:45 PM

Similar Messages

Billing Plan values in the sales order

Hi,
After configuring the billing plan for processing in the order i am able to see the billing vlaues as per the values given in the billing plan type when I run the billing due list. Where as when I tried to create the billing document from the due list it is selecting the total value of the item. It is not copying the Billing plan value instead copying the total value of the item.
can any one help me
regards
AVS

Hi, Rajesh,
My issue is with the billing plan values are not getting copied into the F1 invoice. But when I run the order related billing due list I am able to see all the billing line items with values mentioned in the billing plan.
regards
AVS

Billing Plan Values different in VA02 & VA03

Hi All,
We have a case where in the billing plan values are different for the same sales order when seen in change mode (VA02) & display mode (VA03). can you please let me know what and where the problem can be?
Regards
Sujay

Hi, Rajesh,
My issue is with the billing plan values are not getting copied into the F1 invoice. But when I run the order related billing due list I am able to see all the billing line items with values mentioned in the billing plan.
regards
AVS

Missing billing plan value in header of contract

We are using billing plan, but we don't see the value in the header for the contract.
Though we can see the correct values of the billing plan on item level. Are there any customizing steps we have overlooked?
Please take a look at picture
<a href="http://img144.imageshack.us/img144/1849/missingbillingplanxd8.jpg">Missing billing plan value</a>

Hi,
We can maintain plans at header level and item level.
If you enter billing dates/values at item level, system will not copy values to header.
If you enter billing dates/values at header level, it will copy values to item.
Eg.
1) Item level billing plan
You have 2 items in one sales order, and maintained different billing dates and values for each item.System will not copy values to header.
For same scenerio :
2) Header level billing plan
If you maintain blilling dates at header level, system will automatically distrubute dates and values for both the line items.
Best Regards,
Chandrasekhar.S

Billing plan value with reference to start & End date

Hi Experts,
Request your earliest support for the achieving the below requirement.
Scenario:We have Billing plan set up for the all contracts - valid for one year.Monthly rental amount for each contract item is maintained as base price for the contract. When the billing plans starts in the middle of the month then, the billing value need to be calculated only for the relevant no of days in 'settlement' and 'To' date of billing plan. How to achieve this?
Net value of the contract item
Net value of the item   102.00 GBP
Tax for the item         15.30
Net value of billing plan for the contract item                                                                                .
Item Net value 408.00                GBP
Billing plan and contract validity details for contract item
Billing Plan Type - PM- Monthly in Advance                                    51- Monthly on First of
Contract Start date       07/15/2009 (02)-Contract Start Date        Billing plan Dates from 07/16/2009 02
Contract plan End date 10/14/2009 (09)-Contract End Date          Billing plan Dates until 10/14/2009 09
Horizon -                                                                                Cal-Id - 01
Dates
Settlement       To                      Billing date         Bill.value    Crcy Block BillSt Man. Cor PayT DCat Billing Ty Price cal
   07/16/2009      07/31/2009        08/01/2009         102.00       GBP   FA     A                                   01      ZC           01 -
> This needs to calculated upon net value for 16 days only
   08/01/2009      08/31/2009    09/01/2009              102.00       GBP   FA      A                                 01      ZC            01--->           between 07/16/2009 to 07/31/2009=102/31*16 = 52.65
   09/01/2009      09/30/2009   10/01/2009               102.00       GBP   FA      A                               01      ZC            01
   10/01/2009      10/14/2009    11/01/2009              102.00       GBP   FA      A                               01      ZC            01
Please suggest if this can be achieved through Billing plan configuration or any user exit that can be used to resolve the issue.
Thanks,
Priyabrata

as far as I know there is NO such standard report.
you would try to build sap query based on VBAK/VBAP using VBFA checking LIKP/LIPS and VBRK/VBRP...
but you may request abaper for more professional report with MKPF/MSEG and BKPF/BSEG

Can it be possible to create invoice without billing plan date?

Hi Gurus,
I have made settings for billing plan in contracts. But, client wants billing plan at contract level only for the sake of reporting. Client doesnt want invoice to be created according to these billing plan.
Now, consider this scenario,
I have created contract A with billing plan values in it.
I have created sales order B with reference to contract A. There are no billing plan values in sales order B.
There is no delivery and PGI.
Now, when I try to create invoice with reference to sales order B, system doesnt allow me to save the same and says "No billing plan date found".
Will it be possible to create invoice irrespective of the billing plan in contract?
Please guide.

Hi,
Then in that case i would advise not to use billing plan for your contract document type.
If you intend to create a sales order in reference to your contract document which has billing plan type attached, then in that case you need to maintain billing plan for your sales order document too.
Reward if helpful.
Regards
Ravi

Billing plan in VBKD-FPLNR

Hi Gurus,
When I am creating debit/ Credit memo, for couple of debit/ Credit memo requests corresponding VBKD-FPLNR (Billing plan) value is coming. But it is happening randomly (As I don't know reason).
Can anyone tell me using which config or how VBKD-FPLNR (billing plan) will get filled when you create a debit/ Credit memo request?
Thanks in advance,

Hi,
Please see that the billing plan has been assigned in ur that order or not, If it is been assigned then only that will b reflected back in your table VBKD.
For any queries revert back.
Regards
Gaurav

Down payment - billing plan bill. value

Hello people,
I would like to ask you for help with payment in advance scenario. I have one materiál in sales order with value and item category TAN. Then I put new item with item category TAO. Billing plan is active and is possible to edit data in it. What I have:
Is there any chance that in this field will be actual value of sales order - automatically?
Thank you.
BR,
David

Dear Abul Rahim,
few years ago there was a SAP consultant in our company and together with my colleague bulit this solution. It was never used (for down payment is still used very old solution which is hard to modify so I decided to try this "new one").
How it should work. Create standard sales order with requested materiál items. Then if down payment should happen, insert new service item with item category TAO. Then for this service item create FAZ invoice. After this document is cleared by incoming payment, delivery from sales order is created. And then standard F2 invoice.
This scenario works well, the only thing I do not like is to fill "Billed value" manually to "Billing plan".
As I assume, you mentioned use TAO item category for all "materiál" items. I am not sure whether this is proper solution. If I will have dozens of items to modify in case of down payment is necessary - sales people will hate me. And I am not sure how to handle delivery from this items. For me is preferred solution to use extra service item for down payment. If it means that there is necessary to fill amount, so be it. But if there is a way how to do it automatically, I would be happy.
Thank you and best regards,
David

Billing Plan Item - Condition Value 0

Dear Experts,
I'm creating a Service Contract.
1.Pricing Procedure is Determine
2.Billing Plan at item level is determining saying billing trigger once in a month.
3.Maintained Item Price as 1200 USD in maintain conditions of product.
The problem:
When check the billing plan item value it is showing '0.00' instead of '1200 USD', Can you kindly advise me why the condition type is not determining.
Note:
I used Standard Item Cat no Z.
Best Regards,
Srujan

Please use function module RV_PRICE_PRINT_ITEM
Pseudo code :
IF komk-knumv NE vbdkr-knumv.
    CLEAR komk.
    komk-mandt = sy-mandt.
    komk-kalsm = vbdkr-kalsm.
    komk-fkart = vbdkr-fkart.
    komk-kappl = pr_kappl.
    IF vbdkr-kappl NE space.
      komk-kappl = vbdkr-kappl.
    ENDIF.
    komk-waerk = vbdkr-waerk.
    komk-knumv = vbdkr-knumv.
    komk-vbtyp = vbdkr-vbtyp.
    komk-bukrs = vbdkr-bukrs.
    komk-land1 = vbdkr-lland.
    komk-vkorg = vbdkr-vkorg.
    komk-vtweg = vbdkr-vtweg.
    komk-spart = vbdkr-spart.
    komk-hwaer = vbdkr-waers.
    komk-prsdt = vbdkr-erdat.
    komk-kurst = vbdkr-kurst.
    komk-kurrf = vbdkr-kurrf.
    komk-kurrf_dat = vbdkr-kurrf_dat.
ENDIF.
komp-kposn = vbdpr-posnr.
komp-kursk = vbdpr-kursk.
komp-kursk_dat = vbdpr-kursk_dat.
IF vbdkr-vbtyp CA 'HKNOT6'.
    IF vbdpr-shkzg CA ' A'.
      komp-shkzg = 'X'.
    ENDIF.
ELSE.
    IF vbdpr-shkzg CA 'BX'.
      komp-shkzg = 'X'.
    ENDIF.
ENDIF.
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
    EXPORTING
      comm_head_i = komk
      comm_item_i = komp
      language    = nast-spras
    IMPORTING
      comm_head_e = komk
      comm_item_e = komp
    TABLES
      tkomv       = tkomv
      tkomvd      = tkomvd.
The tables TKOMVD contains the item pricing condiitons

Value based billing plans?

Hi...
I am ABAPer,
I am trying to create value based billing plan in the contrcat creattion..
But if i enter date and bill value and press enter billvalue which entered is not mapping there,
As of now there is no items for this contract,
How can i eneter value based billing plans...?
Thanks,
Naveen.I

I got the solution for this..,
First of all we can't enter value based bill plans for header with having items..
And, for this problem enter at least one line item and then proceed with bill plans.
Then header can accepts you to enter the value based plans...
Thanks,
Naveen.I

Defining values on SD Billing Plan during order entry

Scenario-
User enters a sales order with 10 line items.
Based on specific material master information (material group, etc), items will be split on two billing plans.
For example, lines 1, 3, and 10 would go on the first billing plan at 5% of the price.
The second billing plan would have the remaining 95% for lines 1, 3, and 10.... and 100% for lines 2, 4, 5, 6, 7, 8, and 9.
I can manually go through this process. Is there a way to automate? I see many user exits (old SD style, CMOD/SMOD style, and BAdI style), but they do not appear to manipulate the percentages or fixed values of the billing plan.
Are there any enhancements to set values and define the billing plan details?
Thanks!
Norm

Hi Erik,
Another solution would be to define an output type in the order for sending the mail and to attach a requirement to the output type which will trigger the output only in case the billing block is changed.
Regards,
John.

Bill value of Billing plan in CRM

Hi All,
can you please suggest on FM or method to get the Bill value of Billing plan in CRM.
Thanks in advance.
Subhankar

Hi,
This billing paln is generally created for revenue planning during early stages of Project when sales order doesnt exist. You can copy this billing plan to Sales order. Refer [Billing Plan|http://help.sap.com/saphelp_erp60_sp/helpdata/en/4c/22744246e611d189470000e829fbbd/frameset.htm]
Billing will happen when block in billing plan of Sales order is removed. In case of milestone billing, when you confirm a milestone, billing block is removed and you can proceed to Billing.
Regards

Header Billing Plan Net Value is blank- Any solution?

Dear Gurus,
I have a Periodic Billing plan and have entered the pricing values on at item level. The item billing plan is ok, but I can not see the net value on the header billing plan, is blank
Does anyone know what the issue can be?
Thanks
Iñigo

Hi,
If you get the values correctly at the item level, I think that is correct. You have not enabled the billing plan at the header level. The header BP will be the total of all item BP, only if BP is enabled at header level also. Otherwise the data will be blank in the header BP screen.
Please enable BP at header level and then check how it works.

Billing Plan items invoicing full Net Value

Milestone Bill Plan with 3 different billing dates and amounts (totalling the full net value)
Example info:
Sales Order Total Net Value = $100
Bill Plan dates / Amounts
07/11/2007    $20
08/11/2007    $50
09/11/2007    $30
When I run VF04 and look at any of the individual Billing documents, each one of them is for the full $100 amount. Each one should be for the respective amount ($20, $50, $30 respectively)
Any ideas what config I am missing here ?
Points and praise awarded to the correct answer
Thanks in advance
Bill

hi,
go to transaction code VOV7 and check whether billing plan type is milestone billing or not.
reward points if the answer is helpful
Regards,
Murali

How to see billing plan balance value ?

Team-
I am using billing plan with VA01 and client wants the see the remaining balance of the sales order, how can I do this without RICEF object ?
Lets say billing plan was started with Net value 1000 for 10 periods, and of the period is paid but Net value is still showing 1000. Is there any place where I can find remaining balance of 900 ?
Thanks

Hi,
Go to KKBC_KUN
Put sales contract number and periods from to & execute
You will get
Plan value which is your total contract value
Actual value which is invoice
Plan/actual variance which is your remaining value to be billed
Modify layout if need more information
Or you can view it by VA42/VA43 >> Environment >> Cost report
Kapil

Billing plan values

Similar Messages

Maybe you are looking for