Binding Mouse and Key Events.

Hi,
When a user clicks the Ctrl + V the data from the clipboard
is pasted into the user area. Instead of using this can we do it
using a mouse click. For now, I am planning to bind the event code
of these combinations (CTRL + V == 86) to the mouse click. But when
I tried this I am unable to bind this key event to the mouse event.
Can anyone help me out for getting out of this problem.
Regards,
eodC.

No, it isn't.
Kind regards,
Levi

Similar Messages

In Flashplayer, I can crossover mouse and keyboard events. In IrfanView I cannot. Can this be fixed?

My client uses IrfanView to play SWF files. Unfortunately, he does not use Flashplayer. In Flashplayer, I can crossover mouse and keyboard events with no problem. In IrfanView, the second I click a button, the keyboard events are disabled. Is there a fix?

Hi Ned. I may have posted this issue a bit early, but this problem is also happening in Flashplayer 10. It's not exclusive to IrfanView.
Here is something that I encountered during my testing, when I jump to scene 6 using the menu button, I have a play button to jump from one frame to the next frame that stops -- the keyboard events start working. But if all I am doing is jumping scene to scene with the mouse button, the keyboard events are disabled.
I feel as if the keyboard events only work if I am playing frames in the scene. And if all I am doing is jumping scene to scene using the buttons, the keys will disable.
I set up the mouse buttons inside a movieclip that all the scenes share. The mouse actionscript is in the movieclip. On the main timeline of each scene is an actionscript for the keyboard events, even though I had to change each function name.
I feel the actionscript is setup pretty simple. I just wish clicking the buttons would not disable the keyboard events. This may sound redundant, but the keyboard events do the same thing if you use the mouse buttons. It's just preference for the client even though he will need to understand that using the mouse buttons override the keyboard events. He doesn't really lose functionality.
Keyboard actionscripting below:
import flash.events.KeyboardEvent;
stage.addEventListener(KeyboardEvent.KEY_DOWN, onKeyEvent);
function onKeyEvent(e:KeyboardEvent):void {
var character:String=String.fromCharCode(e.charCode);
if (e.keyCode==72) {
gotoAndStop(1,"master");
if (e.charCode==49) {
gotoAndPlay(1,"Distributor");
if (e.charCode==50) {
gotoAndPlay(1,"Mirka");
if (e.charCode==51) {
gotoAndPlay(1,"Farm");
if (e.charCode==52) {
gotoAndPlay(1,"Check2");
if (e.charCode==53) {
gotoAndPlay(1,"Check3");
if (e.charCode==54) {
gotoAndPlay(1,"Scene2");
if (e.charCode==55) {
gotoAndPlay(1,"Scene1");

Capture All Mouse and Keyboard events even if java window NOT in FOCUS

Hi All,
Is this possible to capture all mouse and keyboard events even if java window is not in focus or is minimized. This java program should cature each and every event from the user once the program is started. Any help in this regard is appreciated!
Thanks&Regards
Sam

I don't think you can. (without JNI)

Lock all mouse and keyboard event.

i am looking ways to lock up all the mouse and keyboard events in windows...do u guy have ways to solve this?

Do you mean that people should not be able to start other applications, or switch to other running applications, before they have typed the right password into you java program? I don't think that can be done in java - it requires more control over the computer than Java typically gives you. You may have some success with full-screen AWT, though.
But why not use log-on-systems incorporated in whatever operating system you are using? Or some other netware thingie? Honestly, I think you are trying to reinvent the wheel, and even with tool that's not very appropriate.

How to sync your mouse and key board to the desk top when both the indicators are flashing?

How to sync your mouse and key board to the desk top when both indicator lights are blinking? I changed the batteries and I dont know how to sync them when they both wont work to follow the step to sync them up...help!

The frozen was not clear in your first post…..
Have you turned the computer off and then back on (force quit if necessary by holding the power button)?
Try resetting the SMC:
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Press the power button to turn on the computer.
Barry

WILL THE NEW FIRE FOX WORK WITH A LOGITECH MOUSE AND KEY BOARD? I THOUGHT I READ SOME WHERE IT WASN'T COMPATABLE. THANKS JOHN

I WANT TO DOWN LOAD NEWEST VERSION OF FIRE FOX BUT AM HESITANT TIL I FIND OUT MORE THANKS, JOHN

John,
Firefox will work with any mouse and keyboard that your computer supports. However, if your computer will not support the mouse or keyboard. Let's say it's a Windows 7 Computer and the mouse was only tested up to Windows XP and is a USB mouse then there may be a case where your mouse will not work. Firefox will never not work with a mouse and keyboard. Remember thoe, if it's a USB Mouse and Keyboard and it says that it's compatible up to Windows XP it will not work on Windows 7 or if it does work it may not work well.
Thanks,
Scott

Windows 8 Mouse and Touch Events

Came accross this issue where AIR runtime 3.8 (and 3.9 beta) on Windows 8 do not track mouse events correctly. Rolling back to 3.7, and publishing to 3.7 is the only way to have existing content work correctly when using a touchscreen.
This also effects GestureWorks projects. TAP events are dispatched but SCALE, DRAG and ROTATE are not.
Everything works perfect on 3.7 on Windows 8. 3.8 works perfect on Windows 7. But no 3.8 on Windows 8.
I think this is a massive issue.
Bug Report Created - https://bugbase.adobe.com/index.cfm?event=bug&id=3635216

First, the rumor is that touch on the W540 will be available H1, but not earlier. If you look at Dell's M3800 with touch, they have delays until mid-March with their Retina touch panels, so it'll take a while for the W540 to be available with touch. It is also possible that the W540 won't be available with touch until Intel's Haswell refresh comes out, but who knows.
Second, if you install the Windows 8.1 upgrade, please take care to check the "Brick your W540" thread, as there is something wrong with the bios and Intel Rapid Start-up Technology. It may result in your motherboard's failure, so disable RST before doing so.

IBooks mouse and touch events

We have an issue with our interactive books on the ipad. We are using epub3, javascripts and event listeners. All interactivity works perfectly on the ipad using eventlistener for touch. When we download the book to mac-maverick-ibooks there is no issue with the mouse events working on the touch events.. Apple want the books to include javascript to handle both touch or mouse events for each device. We attempted to include mouse events with the touch events without success. Does anyone know how to handle this. This is a snippet of the code we triede to use without success.
var eventName = "click";
if (navigator.epubReadingSystem.hasFeature('touch-events')) { eventName = "touchstart"; }
if (document.getElementById('openpopup')) { document.getElementById('openpopup').addEventListener(eventName,popup,false); }

Many Thanks Richard.. sorry for the delay I was away traveling ..I havn't done anything to my pc as yet , but the problem seems to have gone... My son said it was probably because I put some new applications on and maybe this had something to do with it, but it seems to have sorted itself out now..but I will keep your suggestion ready incase it happens again .. thank you again Phil

I have a power mac g3 it boots fine but mouse and key board do not work

The mac boots fine, I can see desk top, etc. The key board and mouse are connected but do not appear to work. This has just happened.

You could take it to a service center but: 1) It would probably cost more than the computer is worth. 2) You'd be lucky to find somebody who knows what a G4 is (maybe I exaggerate but really, they would laiugh at anything that "old"). 3) I don't think we're done here.
Do you still have the original discs. One of them has a hardware test that you can run. You could also see
if it boots to the original disc and if things still won't work. You could even try OS9.
Also look into CUDA reset and NVRAM reset. I think they are both references in the link I provided earlier.
[X-Lab: The Apple Hardware Test|http://www.thexlab.com/faqs/aht.html]
[Apple's AHT support|http://www.info.apple.com/support/aht.html] - Apple Hardware Test Images and Information (for pre-Intel Macs)
Here's the list and downloads for AHT if you have an old G4...
http://www.info.apple.com/support/aht.html
If it really turns out to be the USB hardware that's bad you could probably find a third party USB card you could slip in there for next to nothing and would also give you USB2 speeds. There's minor disadvantages.
Oh, did we determine if it really isn't working at any stage? What about if you hold down the mouse key while booting the computer? That should open the optical drive door if it is being sensed.

Weird mouse and keyboard events windows 7 @g550

My windows 7, on laptop lenovo g550 behaves weirdly lately. After some casual run time i can't right click on desktop, start button doesn't respond, if i switch users and log in back to my user goes back to normal.
Sometimes "c" or "v" keys do nut respond when i press them on firefox window but in adress bar i can write all fine...
Some times same behaviour happens in different window. But when i switch users back again to my user via windows+L key its come back to normal. Please help )
Scanned with updated anti virus nod, malware scanned with lavasoft adaware, cc cleaned. Drivers on gpu are latest, rest of drivers are updated and windows 7 is updated promptly.

Yes, it also happens if I switch to a virtual console. In fact, I attempted to open a session on a virtual console (ctrl-alt-F1) the last time it happened, but I couldn't because my password wasn't logged correctly; the weird thing is, I could type the login name (for example, 'root' or my user name), but when I tried to enter the password it always returned an authentication error because the password was misspelled, or something. I also tried to reset the X server to see if it solved the issue, but I couldn't because the 'Alt' key was not working (when it happens, the only solution is to reboot from the GUI). Any ideas?
Oh, and thanks for your comment about my desktop

Rubbish wireless mouse and key board!

Can anyone help me by telling me why my wireless keyboard and mighty mouse keep disconnecting from the laptop?
the keyboard has got to the point where it just goes off and doesnt reconnect! and the mouse is slow and jittery making it hard to control. I really love the idea of using the apple products because they need no additional dongles or adapters but if this carries on then im gonna have no choice but to swap it for a more usable microsoft variation!

Hi PureEvil,
The “Dongle” is a Bluetooth adapter that actually works :0)
On the Apple store it is called a D-Link DBT-120 USB Bluetooth adapter.
Quote…
“The D-Link DBT-120 USB Bluetooth Adapter enables short-range wireless data connectivity between computers and Bluetooth enabled devices. Personal digital assistants, cellular phones, and other devices can connect wirelessly with your Mac. In a nutshell, Bluetooth unplugs your digital peripherals and makes cable clutter a thing of the past.
Bluetooth is an open specification for wireless data transmission that operates on the globally available 2.4GHz radio frequency. Bluetooth devices can communicate with each other within a 30-foot range.”
Unfortunately Apple’s Bluetooth works in about a 3 foot range – if you are lucky! I bought the USB bluetooth adapter and the keyboard and mighty mouse both work amazingly well now, even from across the room.
I’m very disappointed that I had to fork out another £35.00 to get it to work, especially as I waited for the BT to become available in my build to order, but it works. I’m sure Apple will sort it eventually (?)
Ciao
B

How to handle mouse and/or keyEvents before JTable handles them

Just studying Jtables, but I do not understand some principles. one of the problems is which method in which class do I have to overwrite, so that I can handle mouse and keyboard-Events?
I believe,Using a glasspane is to complicated!
CAn somebody please "put my nose" into the right direction ?
Nice Sunday to You all.
Thanks
Hanns

Look at JComponent. You can override the methods:
public void processMouseEvent(MouseEvent e)
public void processMouseMotionEvent(MouseEvent e)
protected boolean processKeyBinding(KeyStroke ks, KeyEvent e, int condition, boolean pressed)
As of 1.3 the existing key events can be overwritten ( or you can add your own defined key events) by using input and action maps.
You can add bindings for any keyStroke and add your own defined action this way:
int i = JComponent.WHEN_ANCESTOR_OF_FOCUSED_COMPONENT;
m_table.getInputMap(i).put( KeyStroke.getKeyStroke(KeyEvent.VK_TAB, 0, false), "Tab - P");
m_table.getActionMap().put("Tab - P", new TabAction());
private class TabAction extends AbstractAction
public void actionPerformed(ActionEvent ae)
//define what you want tab to do here
You can get rid of the key/keyaction this way:
m_table.getInputMap(i).put(KeyStroke.getKeyStroke(KeyEvent.VK_ESCAPE, 0), "Quit - P");
m_table.getActionMap().put("Quit - P", null);
You could use java's pre-defined action this way:
Object tab_action_key = m_table.getInputMap(i).getParent().get(KeyStroke.getKeyStroke(KeyEvent.VK_TAB, 0));
m_table.getInputMap(i).put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "Enter - P");
m_table.getActionMap().put("Enter - P", tab_action_key);

First time user trying to set up new Mac pro, wireless mouse and wireless keyboard together?

So I just bought a new Mac Pro, wireless keyboard and mouse. i am a first time Mac user. How do I even get started......connect the wireless mouse and key board to the Mac Pro desktop to even get started??

Just turn on the mouse and keyboard and observe that the green light comes on and starts to blink then turn on the Mac. The Mac should give you on-screen instructions.

Recording the input of mouse and keyboard outside of a visible GUI

I am trying to write something sorta like pc anywhere except I dont quite know how to approach the problem of recording the input from the mouse and keyboard. I have thought of using a glass pane the size of the screen but once I have captured the mouse or keyboard events how do I send them through to the underlying OS (as if nothing happened)?

This is not possible in java. You should register to some native mouse and keyboard listener mechanism. and let them notify you of all the mouse and keyboard events. Maybe JNI can help you accomplish this.

Imac 27 in and bluetooth mouse and keyboard with windows

Mouse and key board will not work with windows? Is there something i can download to fix this. If i boot up in widows i have to go to a wired keyboard and mouse.

I forgot to add im running windows 7 pro with bootcamp.

Binding Mouse and Key Events.

Similar Messages

Maybe you are looking for