Binding variables to field(s)

Hi All.
I created variable and I would like to binding the value of that variable to field or fields. If that is possible how it to do?
Thanks.

eugzl,
OK, I thought you were using form variables. If you aren't then where is this variable declared? As long as it is in scope, you can use it to set various object's value. Most objects have a field called rawValue that lets you set the displayed value. So if you had a Text Field called TextField1 you would do this:
TextField1.rawValue = test;
TextField1 would then display "sample".

Similar Messages

Can i extract no of columns fields as by using bind variables....

can i extract no of columns fields as by using bind variables....

SBH wrote:
I suppose you are asking for bind variable columns and their substituted values. You can query V$SQL_BIND_CAPTURE to view complete info about thatI've never had good luck with V$SQL_BIND_CAPTURE. Maybe its more robust since I tried on 9i several years ago; I could never find what I was looking for there :(
Edited by: riedelme on Jul 14, 2010 6:15 AM

Combo box with bind variable from popup

Hi.
I had two comboboxes on a form, one having a bind variable. It works great, with the first one as bind field.
But i want to have the first LOV to be a POPUP. So, the second LOV (combo box) needs to be refreshed when a user has picked a value from the popup list. When i do that, the second LOV is not refresehed...
Is there a way to do this?
(3.0.9.8.3.A)

Hi,
This was a bug and is fixed in 30984.
Thanks,
Sharmila

How to use SYSDATE as a default value of a bind variable in a query report?

Hi,
I want to use SYSDATE as default value for a bind variable in Query based report.
I don't see any way to do it, someone helps?
Thanks a lot.
Paulo.

You can aslo use #sysdate directly.
Hi,
The way I'm doing in my report is, I have a database function (f_ret_sysdate) with the following code
create function f_ret_sysdate return varchar2
begin
return to_char(sysdate,'mm/dd/yyyy');
end;
Now, in the 'Customization Form Display Options' section of the report I'm calling this function as #f_ret_sysdate in the default value field of corresponding bind variable to display SYSDATE with the format.
Hope this helps!...
-Krishnamurthy

Bind Variable in SELECT statement and get the value in PL/SQL block

Hi All,
I would like pass bind variable in SELECT statement and get the value of the column in Dynamic SQL
Please seee below
I want to get the below value
Expected result:
select distinct empno ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT' and pr.empno =100
100, HR
select distinct ename ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT' and pr.empno =100
TEST, HR
select distinct loc ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT' and pr.empno =100
NYC, HR
Using the below block I am getting column names only not the value of the column. I need to pass that value(TEST,NYC..) into l_col_val variable
Please suggest
----- TABLE LIST
CREATE TABLE EMP(
EMPNO NUMBER,
ENAME VARCHAR2(255),
DEPT VARCHAR2(255),
LOC    VARCHAR2(255)
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (100,'TEST','HR','NYC');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (200,'TEST1','IT','NYC');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (300,'TEST2','MR','NYC');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (400,'TEST3','HR','DTR');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (500,'TEST4','HR','DAL');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (600,'TEST5','IT','ATL');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (700,'TEST6','IT','BOS');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (800,'TEST7','HR','NYC');
COMMIT;
CREATE TABLE COLUMNAMES(
COLUMNAME VARCHAR2(255)
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('EMPNO');
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('ENAME');
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('DEPT');
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('LOC');
COMMIT;
CREATE TABLE DEPT(
DEPT VARCHAR2(255),
DNAME VARCHAR2(255)
INSERT INTO DEPT(DEPT,DNAME) VALUES ('IT','INFORMATION TECH');
INSERT INTO DEPT(DEPT,DNAME) VALUES ('HR','HUMAN RESOURCE');
INSERT INTO DEPT(DEPT,DNAME) VALUES ('MR','MARKETING');
INSERT INTO DEPT(DEPT,DNAME) VALUES ('IT','INFORMATION TECH');
COMMIT;
PL/SQL BLOCK
DECLARE
TYPE EMPCurTyp IS REF CURSOR;
v_EMP_cursor    EMPCurTyp;
l_col_val           EMP.ENAME%type;
l_ENAME_val       EMP.ENAME%type;
l_col_ddl varchar2(4000);
l_col_name varchar2(60);
l_tab_name varchar2(60);
l_empno number ;
b_l_col_name VARCHAR2(255);
b_l_empno NUMBER;
begin
for rec00 in (
select EMPNO aa from EMP
loop
l_empno := rec00.aa;
for rec in (select COLUMNAME as column_name from columnames
loop
l_col_name := rec.column_name;
begin
l_col_val :=null;
   l_col_ddl := 'select distinct :b_l_col_name ,pr.dept ' ||' from emp pr, dept ps where   ps.dept like ''%IT'' '||' and pr.empno =:b_l_empno';
   dbms_output.put_line('DDL ...'||l_col_ddl);
   OPEN v_EMP_cursor FOR l_col_ddl USING l_col_name, l_empno;
LOOP
    l_col_val :=null;
    FETCH v_EMP_cursor INTO l_col_val,l_ename_val;
    EXIT WHEN v_EMP_cursor%NOTFOUND;
      dbms_output.put_line('l_col_name='||l_col_name ||' empno ='||l_empno);
   END LOOP;
CLOSE v_EMP_cursor;
END;
END LOOP;
END LOOP;
END;

user1758353 wrote:
Thanks Billy, Would you be able to suggest any other faster method to load the data into table. Thanks,
As Mark responded - it all depends on the actual data to load, structure and source/origin. On my busiest database, I am loading on average 30,000 rows every second from data in external files.
However, the data structures are just that - structured. Logical.
Having a data structure with 100's of fields (columns in a SQL table), raise all kinds of questions about how sane that structure is, and what impact it will have on a physical data model implementation.
There is a gross misunderstanding by many when it comes to performance and scalability. The prime factor that determines performance is not how well you code, what tools/language you use, the h/w your c ode runs on, or anything like that. The prime factor that determines perform is the design of the data model - as it determines the complexity/ease to use the data model, and the amount of I/O (the slowest of all db operations) needed to effectively use the data model.

How to use bind variable value of one VO as initial value for other VO row?

JDeveloper 10.1.3.3, ADF Faces, ADF BC
Hi,
I have two View Objects: one read only with several bound variables and another editable entity based. Correspondingly there are two ADF Faces pages: first contains search form based on the read-only VO and second create form based on the editable VO. The search form has several hidden fields for some of bound variables because they aren't edited directly by user. These fields are updated with PPR when user selects other search criteria from LOV.
There is a command button in the first page that navigates to the second form. Is there any way to transfer values of bound variables from the first VO to the second VO as initial values of the new row?
I tried to set custom controller for the second page and retrieve search criteria values from request parameter map but values from hidden fields are missing. I think because that these fields are updated by PPR. Of course I can add custom action method to the navigation button and in the method put these values to request parameter map but I hope there is better solution.
Thanks,
Marius

To summarize, given a bind variable value for one VO, on creating a row in a second VO, for 1 of the attributes of the second VO, you want to use the first VO's bind variable value. Correct?
A potential solution ADF BC driven:
1) Ensure you have an AppModuleImpl for your AM
2) Ensure you have a ViewImpl for your 1st VO (where the bind variable will exist) - lets refer to that VO as "Alpha"
3) Ensure you have a ViewRowImpl for your 2nd VO (the one you want to default the value in) - lets refer to that VO as "Beta"
4) For your first VO "Alpha" create the bind variable (say pValue)
5) In your second VO "Beta" ViewRomImpl add following code:
@Override
protected void create(AttributeList attributeList) {
super.create(attributeList);
AppModuleImpl am = (AppModuleImpl)this.getApplicationModule();
String someValue = am.getAlphaView1().getpValue();
setSecondVOAttr(someValue); // change this code to whatever your setter is for the field you want to initialize.
}Hope this helps. Let us know how you go.
Regards,
CM.

How to call a report with a bind variable from a multi-record block

Hi,
I have created a report using the BI Publisher functionality. I did all the integration, created the SQL Query and uploaded the template. Up till here everythings fine!
My SQL Query has 2 bind variables.
I will call my report from a multi record block, at the end of each record an icon is shown which the user can click to open the report.
I created a column link for this item (PRINT_REPORT=Inschrijvingsformulier) but I do not manage to pass the parameters to my report. The parameters I want to pass are 2 columns in this Multi Record block.
I created 2 hidden fields on the page P9_PARAMETER1, P9_PARAMETER2 with the same names as my bind variables and fill this in with the values #PARAMETER1#, #PARAMETER2# from the multi record block.
It seems it does not work as my report stays empty. (also XML file stays empty).
Am I trying the wrong way?
Thanks for any advice,
Kris

hi khadeer,
create one report program and write the required code,and call this function module 'SSF_FUNCTION_MODULE_NAME' and give your smartform name and also when u activate ur smart form u will get one function module call that function module also and specify any tables used...
i think this solves ur problem...
any queries revert back..
pls reward points if helpful,
shylaja

How to default bind variable using session variable at run time

Hi All,
I have a requirement where all VO queries (multiple VOs) produce only records that meet a certain value.
For example, I have three tables with 3 VOs and each of them has a one-to-many relationship to another table (let's call it ref table and this table has a field called release). One of the 3 VOs is a parent/master table, and the other two are child tables. I created a VO for master table that linked to the ref table and created a view criteria using the release (use bind variable) field from the ref table. The other child tables have their own VO that has view criteria that also linked to ref table using the release field.
On the UI page, I created a query component and a table from the master table VO. I also dropped the child table VOs in a tabbed panel which partial triggered by the master table. When I ran a query for a 'release' (hint: ref table value), the table for master table was filled the correct records that meet the criteria. Unfortunately, the child tables were not correct due to the query didn't use the bind variable that filter only records for the same 'release' value as the master table.
The question is how do I 'default' or dynamically set the bind variable on the child tables based on the selection criteria from the query component. I am thinking to set a session variable from the query and use it in the bind variable in the child table, but not sure how to do it.
Any suggestion how to do it or better solution to achieve the same effect?

Hi,
How about creating a custom AMImpl method, that takes parameters as required, and set the bind variables for all the desired VOs and perform executeQuery on them.
You could expose this as client interface, and then use the method as parameter form.
Check this thread for ex.
Re: Setting Attribute in View Object through Managed Bean
-Arun

How to use a bind variable in a table-validated flexfield

Hi,
I want to prepare a table-validated descriptive flexfield, which uses as source a select statement.
So, in the form "Validation table information" I use as table name the statement:
(SELECT my_procedure('test_value') FROM DUAL)
Up to here it works fine.
But instead of 'test_value' I want to use the value of a field in the form or a value of another flex (using $FLEX$ bind variables).
Please advice if it is possible to perform this in "table name" statement. I use it in "where/order by" clauses and it works fine.
Thank you.

Hi,
I have posted in the place where you did advise,
https://forums.oracle.com/thread/2560192
but they reply there that this is an EBS question, with no much relation to dev tools in general.
Please, can I continue in this place with this question?
Thank you.

Trying to pass array to stored procedure in a loop using bind variable

All,
I'm having trouble figuring out if I can do the following:
I have a stored procedure as follows:
create procedure enque_f826_utility_q (inpayload IN f826_utility_payload, msgid out RAW) is
enqopt dbms_aq.enqueue_options_t;
mprop dbms_aq.message_properties_t;
begin
dbms_aq.enqueue(queue_name=>'f826_utility_queue',
enqueue_options=>enqopt,
message_properties=>mprop,
payload=>inpayload,
msgid=>msgid);
end;
The above compiles cleanly.
The first parameter "inpayload" a database type something like the following:
create or replace type f826_utility_payload as object
2 (
3 YEAR NUMBER(4,0),
4 MONTH NUMBER(2,0),
83 MUSTHAVE CHAR(1)
84 );
I'd like to call the stored procedure enque_f826_utility_q in a loop passing to it
each time, new values in the inpayload parameter.
My questions are:
First, I'm not sure in php, how to construct the first parameter which is a database type.
Can I just make an associative array variable with the keys of the array the same as the columns of the database type shown above and then pass that array to the stored procedure?
Second, is it possible to parse a statement that calls the enque_f826_utility_q procedure using bind variables and then execute the call to the stored procedure in a loop passing new bind variables each time?
I've tried something like the following but it's not working:
$conn = oci_pconnect (....);
$stmt = "select * from f826_utility";
$stid = oci_parse($conn, $sqlstmt);
$r = oci_execute($stid, OCI_DEFAULT);
$row = array();
$msgid = "";
$enqstmt = "call enque_f826_utility_q(:RID,:MID)";
$enqstid = oci_parse($conn, $sqlstmt);
oci_bind_by_name($enqstid, ":RID", $row); /* line 57 */
oci_bind_by_name($enqstid, ":MID", $msgid);
while ($row = oci_fetch_array($stid, OCI_RETURN_NULLS+OCI_ASSOC))
++$rowcnt;
if (! oci_execute($enqstid)) /* line 65 */
echo "Error";
exit;
When I run this, I get the following:
PHP Notice: Array to string conversion in C:\Temp\enqueue_f826_utility.php on l
ine 57
Entering loop to process records from F826_UTIITY table
PHP Notice: Array to string conversion in C:\Temp\enqueue_f826_utility.php on l
ine 65
PHP Warning: oci_execute(): ORA-06553: PLS-306: wrong number or types of argume
nts in call to 'ENQUE_F826_UTILITY_Q' in C:\Temp\enqueue_f826_utility.php on lin
e 65
PHP Notice: Undefined variable: msgnum in C:\Temp\enqueue_f826_utility.php on l
ine 68
Error during oci_execute of statement select * from F826_UTILITY
Exiting!

Thanks for the reply.
I took a look at this article. What it appears to describe is
a calling a stored procedure that takes a collection type which is an array.
Does anyone from Oracle know if I can pass other database type definitions to a stored procedure from PHP?
I have a type defined in my database similar to the following which is not
an array but a record of various fields. This type corresponds to a payload
of an advanced queue payload type. I have a stored procedure which will take as it's input, a payload type of this structure and then enqueue it to a queue.
So I want to be able to pass a database type similar to the following type definition from within PHP. Can anyone from Oracle verify whether or not this is possible?
create or replace type f826_utility_payload as object
YEAR NUMBER(4,0),
MONTH NUMBER(2,0),
UTILITY_ID NUMBER(10,0),
SUBMIT_FAIL_BY VARCHAR2(30),
MUSTHAVE CHAR(1)
);

I am getting this error message "ORA-01006: bind variable does not exist.

My code works fine like this:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE
FROM R5EVENTS WHERE ROWID = :ROWID;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_JOBTYPE , 'X') IN ('BRKD','UNPLBRKD','FILTRA', 'LUB', 'FAC') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;
But I want to change the code to include a record (ACT_TRADE) from another table(R5ACTIVITIES). I am getting this error message "ORA-01006: bind variable does not exist - POST-UPDATE 200Before Binding". Any help would be appreciated.
DECLARE
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
V_CODE varchar2(8);
V_EVENT varchar2(8);
V_TRADE varchar2(8);
BEGIN
SELECT R5EVENTS.EVT_STATUS, R5EVENTS.EVT_FAILURE, R5EVENTS.EVT_CAUSE, R5EVENTS.EVT_ACTION, R5EVENTS.EVT_CODE, R5ACTIVITIES.ACT_EVENT, R5ACTIVITIES.ACT_TRADE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, V_CODE, V_EVENT, V_TRADE
FROM R5EVENTS, R5ACTIVITIES WHERE V_CODE = :V_EVENT;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_TRADE , 'X') IN ('MTM','MTL','MTMGT', 'FTM', 'FTL', 'FTMGT', 'R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;

Thank you for your responses. Your feedback was helpful. This is what I ended up doing for a solution:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
v_GROUP varchar2(30);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE, USR_GROUP
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE, v_GROUP
FROM R5EVENTS, R5USERS WHERE R5EVENTS.ROWID = :ROWID
AND USR_CODE = O7SESS.CUR_USER;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(V_GROUP,'X') IN ('MTM','MTL','MTMGT','FTL','FTMGTS','PLANNER','DISPATCH','PMCOOR','R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;

I want to remove bind variables in my data like & and many

I have a field that holds description of a code and this is having bind variables (special characters). I need to remove them and replace with no value.
I was trying with following sql and the dialog box (Enter Substitution Variable)is opening when I tried to execute the sql.
select regexp_replace('B VOC AC & HEATING (*[[:punct:]])', '') from dual;
please provide me the SQL how to do this
Thanks in advance

Hi,
It looks like your question is about Substitution Variables, that typically look like &start_date or &1. Bind Variables are completely different.
By default, SQL*Plus, and some other front ends, expect that & will be followed by a substitution variable name. If you're not using substitution variables, and you want to treat & as a normal character, then use Pablolee's suggestion. SET DEFINE OFF will make SQL*Plus treat & as a normal character until you end the SQL*Plus session, or you explicitly cancel it by saying SET DEFINE ON.
By the way, did you mean to call REGEXP_REPLACE with 2 arguments, like you posted
select regexp_replace('B VOC AC & HEATING (*[[:punct:]])', '') from dual;
or with 3 arguments, something like this
select regexp_replace ( 'B VOC AC & HEATING'
                       , '(*[[:punct:]])'    -- Round parentheses, '(' and ')', are not doing anything in this case
                       , ''                  -- NULL might be clearer
from    dual;
? Also, '*' in a regular expression p
attern, means "the last item can occur 0 or more times". In your code, there isn't any "last item" before the '*', What are you trying to do? Post some sample data (CREATE TABLE and INSERT statements) for a few different sample cases, and the results you want from that sample data.
See the forum FAQ: https://forums.oracle.com/message/9362002

Setting bind variable for a view object from the Managed Bean

Hi,
i am using JDeveloper 11g, i have to create LOV in the JSF. To show the LOV, it has to populate data using View object and its query parameter need to be sent from the Managed Bean.
For the View object i want to set the bind variable parameter from the managed bean value. bename is stored in a managed bean (session scope)
#{beantest.bename}
But it gives the following exception.
JBO-29000: Unexpected exception caught:
org.codehaus.groovy.control.MultipleCompilationErrorsException,msg=startup failed, Script1.groovy: 1: expecting '!',found '{'@ line1, column 2.
I have followed the link http://kr.forums.oracle.com/forums/thread.jspa?threadID=615474 like Frank wrote on 8.2.2008:
But steps are not clear.
How to input the VO bind parameter with Managed bean variable?
Any Help
Regards
Raj
Edited by: user9928180 on Dec 17, 2008 9:51 AM

Hi,
a bind variable in a VO needs to be exposed as an executeWithParams operation in the pageDef file. Just add a new action binding to the pageDef file (context menu) and select the executeWithParams operation on teh VO. Then in the argument field, reference the managed bean property for the value
Frank

Bind variable in Master Detail form

Is there any way to go to a specific master record (bind variable) and it's associated detail information in a master detail form using a link from another report?
Louis

I suspect that he may have the same question I do. Namely, if I have four tables (employees, projects, tasks, and project_assignments) how do I create a master detail form where I can specify the project and the employee via LOVs? The project_assignments table contains foreign keys for employee, project, and task, as well as additional fields relating to the task status.
Currently, I have it set up so that the employee name can be selected and the project is hard coded to the current project.
Is there an easy way to populate the detail records based on two LOVs in the master form?
Thanks in advance,
Fritz

Bind variable problem in a procedure

Hi,
Is there any way I can pass a parameter in a procedure as we do in sql plus (for example where date = &date).
I have a procedure that is somewhat similar to this...
select (field 1, field2...
from table1, table 2....
where ....
and ..
and v_fiscal_year (here I want the bind variable)
UNION
select (field 1, field2...
from table1, table 2....
where .....
and ..
and ..
and v_fiscal_year (here I want the bind variable)
I need to register this procedure in oracle apps as a concurrent program where a user should be able to provide value for fiscal_year and then write the file out in a text file.
Thanks
A/A

What you've shown isn't a procedure, but is a query.
I assume your "field1", "field2" within the query means that you are expecting to be able to create a dynamic SQL from parameters passed into a procedure.
For that you will need to use DBMS_SQL package to create and execute a dynamic query or use the EXECUTE IMMEDIATE statemetn to execute a query built up in a string. Note however, that dynamic SQL is inherently bad practice and should only ever be used as a last resort. What exactly are you trying to achieve as there are likely to be better ways of doing it?

Binding variables to field(s)

Similar Messages

Maybe you are looking for