Bios freezes after jumping jbat1 (msi P41-C31)

In school we built a computer that has the following motherboard msi P41-C31, 500gb hdd, Pentium dual core 2.80 ghz (E5500), two 2gb ddr3 1066 ram, sparkle nvidia geforce 8400s 256 ddr 2. When we installed xp 32bit and vista 32 bit it only showed 2gb memory usable memory. We went in the bios and it says 2gb usable memory. So someone in the class jumped there jbat1 and got the 4gb of ram to work. I did that with mine and it worked. And today the teacher did some things to the computer. I fixed every thing she did to it. Now i don't have 4gb of ram I'm back down to 2gb. so i jumped the jbat1 again when i go into the bios to set the time and date when i save, it freezes. The power button wont shut it down so i had to turn it off with the power supply button on the back. Now it wont turn on so i have to jiggle the jbat while pressing the power button to turn it back on. Then i go into the bios to set the time and date it freezes i have to keep doing the same thing over and over again. I didn't tell the teacher yet any ideas?

Quote from: sjay on 19-April-11, 04:53:50
This is just speculation in trying to help your situation: Maybe she set the CMOS jumper and didn't remember to set it back into its proper position??
she did not mess with it other then switching the voltage meter and one memory slot was not seeded correctly. Before fixing it she told us to power on to see which one of us she messed with. So i did then i fixed it every thing was fine but that took me back down to 2gb so i jumped it.

Similar Messages

HP Pavilion dv6-3071tx bios freezes after bios flash

I updated my BIOs to http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55299.exe
Now it freezes at the BIOs on boot. I think it's due to a bad flash. I want to reflash it and I've followed the instructions where I place the BIOS file 01448F29.bin onto a usb stick named HP_TOOLS and held down Windows Key + B, however it just stays on a black screen.
How can I flash the BIOs again?

How to recover the BIOS
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02693833&tmp_task=solveCategory&cc=us&dlc=en&lc...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

BIOS freezes after enabling RAID

Even since I setup my RAID array, when I try to go into the BIOS, it is frozen. I cant move the cursor at all. I have tried waiting about 2 mins to see if it just needed some time to initilize the RAID but nothing. If I clear the CMOS, I can get back into the BIOS fine, untill I enable the RAID again.
I have 2 IBM 60GB in a raid 0 array on IDE primary master and slave. I have looked around and havent found anyone else with a similar issue. My OS is installed on the RAID array, and I cant boot into windows fine and everyhting is stable, so I dont think it is a hardware issue.
Any suggestions would be much appreciated.
Thanks,
rasgryphon

Quote
Originally posted by rasgryphon
Even since I setup my RAID array, when I try to go into the BIOS, it is frozen. I cant move the cursor at all. I have tried waiting about 2 mins to see if it just needed some time to initilize the RAID but nothing. If I clear the CMOS, I can get back into the BIOS fine, untill I enable the RAID again.
I have 2 IBM 60GB in a raid 0 array on IDE primary master and slave. I have looked around and havent found anyone else with a similar issue. My OS is installed on the RAID array, and I cant boot into windows fine and everyhting is stable, so I dont think it is a hardware issue.
Any suggestions would be much appreciated.
Thanks,
rasgryphon
If you unhook the hard drives and all the IDE devices, cdroms and such can you get into the bios?

Msi p45 platinum - freezes after power save turns off displays

Just put this computer together, everything is stock, no overclocking. Seems to run fine, played a few hours of modern warfare 2 with no issues.
I noticed It seems to freeze after the monitor gets turned off by the power save mode. I just tested this by setting it to turn off displays after 1 minute of inactivity, waited watched the monitor turn off, then I went to the move the mouse and the screen came back on but the cursor would not move. sometimes the screen will not even come back on.
I have turned the computer on, left the room while it was booting to eat breakfast or take a shower, came back the screen was still on but the computer was frozen. Window 7 login screen was up, but there were some graphic glitches. this has happened a couple of times.
If I manually put the computer to sleep it seems to come back properly.
msi p45 platinum 1.6 bios, optimized defaults loaded
e5200 intel dual core @2.5 ghz, 200FSB 12.5 multiplier
4 x 1gb ddr2 (800mhz, nanya brand)
nvidia gtx 260 (195.63 drivers x64)
win7 ultimate x64
enermax 720w powersupply

I think it might be the video card or power supply. Was building two systems,
second system has identical motherboard, processor and ram,
galaxy gts 250 instead of the evga gtx 260.
antec 430 earthwatts instead of Enermax EIN720AWT 720W Power Supply
Installed from same OS disc and same set of drivers. Second system seems to operate the powersave mode for the monitor correctly. Will have to do some testing switching videocards tonight.

G31M Freezing After RAM Check, Says 1596fsb which might be problem..

Hello....
Putting together a Dual core duo with a MSI G31M mobo. It keeps resetting itself.. wont even show post.. all i here is one tiny, quick (not loud) beeping. and if it hit DEL or TAB... it will show the corresponding screen, but just frozen.
The insert button thing isnt working either (yes i did total power removal).
It says on the top of the POST screen "Speed: 1596 mhz" which might be the problem...
It freezes after "Init USB controllers: OK | 1015mb..." then it stops..
Thanks everybody...

Hi,
your BIOS Version is too old to properly support your E7400. That is why the CPU Frequency only shows as "1596 mhz" and that is also why the system does this:
Quote
all i here is one tiny, quick (not loud) beeping. and if it hit DEL or TAB... it will show the corresponding screen, but just frozen.
Quote
It freezes after "Init USB controllers: OK | 1015mb..." then it stops..
There are three possible solutions to solve the situation:
1) Install a processor supported by BIOS Version 7.1 to be able to properly turn on your system and then update the BIOS to the latest Version to be able to use your E7400 (update should be done from DOS only).
2) Ask in a local computer shop or contact your reseller to do the same thing for you.
3) Connect an internal floppy drive and a PS/2 Keyboard and then try to force the system into AMI BIOS Recovery Mode. Instructions:
Quote
Rename the desired AMI BIOS file to AMIBOOT.ROM and save it on a floppy disk. e.g. Rename A569MS23.ROM to AMIBOOT.ROM
Insert this floppy disk in the floppy drive. Turn On the system and press and hold Ctrl-Home to force update. It will read the AMIBOOT.ROM file and recover the BIOS from the A drive.
When 4 beeps are heard you may remove the floppy disk and restart the computer.
Even though the AMI BIOS Recovery Procedure is the only chance you have to solve the situation without installing a different processor, it does not work in all cases. However, as it is an easy procedure, it is at least worth a try.

Re: install of 80gig drive into a MS-5187 bios freezes

I am trying to install a WD800JB hard drive into my Borther-in-law's computer which has a
MS-5187 mainboard. When I re-start the computer the drive is recognized as a slave, but the bios freezes just before boot to WinXP. On the screen is a chart in the bios screen with the installation. However by the new drive there is only the following "UDMA,4" but no indication of the drive size whereas the older drive indicates the size of the drive. How do I solve the issue of the new install? Do I flash the bios or do I install a PCI/IDE contoller card? I tried using the MSI liveupdate and it indicates that I have the latest bios an Award 4.51PG. Help please.
Thanks Don

Yes WD does say in the personalized setup manual produced with their version of Data Lifeguard that the Award 4.51 BIOS can be an issue. Their advice is an updated BIOS or to manual limit the drive's capacity to 32Gigs which to me seems pointless since it is a 80Gig drive that was purchased for it's capacity as stated. I downloaded the BIOS fix from the suggested link, but am unsure of how to do this sort of procedure. Everyone I have talked to concurs that a BIOS update is risky. As for the cable I tried my own cable because it came with my WD drive and still that did not work. As for the jumper selection I tried every possible configuration to no avail.

Satellite Pro A210 PSAFHE - Windows 7 - freezes after sleep/hibernate

I have a Satellite Pro A210 PSAFHE running dual boot Windows XP/7
Using Windows 7 - either 32 or 64 - the system always freezes after sleep/hibernate.
This never happens with XP which sleeps and hibernates OK..
There are no drivers at all for this notebook on the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
I like System 7 and use it on my other computers but without sleep/hibernate I will revert to XP.

Hi
> There are no drivers at all for this notebook on the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
Sorry mate but you are wrong.
All Win 7 drivers for Satellite Pro A210 are released on the Toshiba European driver page I recommend checking it again
Since this issue does not appear using Win XP, I can say for sure that this has nothing to do with the hardware but its a software related issue
I recommend updating the graphic card driver
Furthermore there is a new BIOS for Sat Pro A210 PSAFHEits v2.0
Check if you are using the latest version

Freezes after playing video playlist

My 60G freezes after playing my video playlist. I have to wait until the battery runs down then plug it in to reboot it for it to work again. I took it back to Best Buy where I purchased it, and they installed the latest update. They claimed this would fix the problem. Wrong! Any suggestions?
Thanks!

There is no screen event triggered when the video finishes playing that you can use to jump to the next slide or unhide a button to enable the user to navigate forward at a time of their own choosing.
If you know the duration of the video, you can place a navigation button on the timeline at that point so that it appears just after the video finishes playing. However, you may find that on different PCs with different system specs the video may take slightly more or less time to play.

[SOLVED] System freeze after upgrade linux-3.12.9-2 to linux-3.13.4-1

After upgrading from kernel 3.12.9 to 3.13.4 (booth x86_64 architecture) i detected system freeze after round about 0.5s of the login screen about 80% of the time.
So i first thought it coulbe be the the ati driver and uninstalled that via livecd/chroot.
But the same thing happens in comand line only mode.
Afterwards i setup at ssh server to get into the maschine if it is still running, but is was also not responding to that.
Downgrading to 3.12.9 solved the issue. In journalctl i could not find any usefull information.
Last edited by schlumpfimsumpf (2014-04-10 19:16:57)

Me wrote:
It is same for me. Wont boot, and crash before I can write mine pass to text screen. I use lts at now.
H/W path Device Class Description
===============================================
system GA-970A-UD3
/0 bus GA-970A-UD3
/0/0 memory 128KiB BIOS
/0/4 processor Athlon
/0/4/a memory 128KiB L1 cache
/0/4/c memory 2MiB L3 cache
/0/b memory 128KiB L1 cache
/0/29 memory 8GiB System Memory
/0/29/0 memory DIMM 1600 MHz (0,6 ns) [empty]
/0/29/1 memory DIMM 1600 MHz (0,6 ns) [empty]
/0/29/2 memory 4GiB DIMM 1600 MHz (0,6 ns)
/0/29/3 memory 4GiB DIMM 1600 MHz (0,6 ns)
/0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B)
/0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU)
/0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B)
/0/100/2/0 display GF106 [GeForce GTS 450]
/0/100/2/0.1 multimedia GF106 High Definition Audio Controller
/0/100/4 bridge RD890 PCI to PCI bridge (PCI express gpp port D)
/0/100/4/0 bus EJ168 USB 3.0 Host Controller
/0/100/4/0/0 usb3 bus xHCI Host Controller
/0/100/4/0/0/2 storage ADATA USB Flash Drive
/0/100/4/0/1 usb2 bus xHCI Host Controller
/0/100/9 bridge RD890 PCI to PCI bridge (PCI express gpp port H)
/0/100/9/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
/0/100/a bridge RD890 PCI to PCI bridge (external gfx1 port A)
/0/100/a/0 bus EJ168 USB 3.0 Host Controller
/0/100/a/0/0 usb8 bus xHCI Host Controller
/0/100/a/0/1 usb7 bus xHCI Host Controller
/0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
/0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
/0/100/12/1 usb6 bus OHCI Host Controller
/0/100/12/1/5 input M Dongle
/0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/12.2/1 usb1 bus EHCI Host Controller
/0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
/0/100/13/1 usb9 bus OHCI Host Controller
/0/100/13/1/1 input USB Receiver
/0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/13.2/1 usb4 bus EHCI Host Controller
/0/100/14 bus SBx00 SMBus Controller
/0/100/14.2 multimedia SBx00 Azalia (Intel HDA)
/0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller
/0/100/14.4 bridge SBx00 PCI to PCI Bridge
/0/100/14.4/7 multimedia SAA7134/SAA7135HL Video Broadcast Decoder
/0/100/14.4/e bus VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
/0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
/0/100/14.5/1 usb10 bus OHCI Host Controller
/0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
/0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
/0/100/16/1 usb11 bus OHCI Host Controller
/0/100/16/1/3 multimedia USB Web Camera
/0/100/16/1/4 multimedia USB Sound Device
/0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
/0/100/16.2/1 usb5 bus EHCI Host Controller
/0/101 bridge Family 15h Processor Function 0
/0/102 bridge Family 15h Processor Function 1
/0/103 bridge Family 15h Processor Function 2
/0/104 bridge Family 15h Processor Function 3
/0/105 bridge Family 15h Processor Function 4
/0/106 bridge Family 15h Processor Function 5
/1 scsi6 storage
Working again. I think problem was the partition was full.
Last edited by gyurman (2014-04-13 07:51:22)

Macbook pro freezes after sleep, after 6 months of not having that problem

Hello,
I'm really frustated with my macbook pro. Like the tittle says, my computer freezes after waking up and the only thing to do is use the On/Off button. It is a macbook pro '13 2010.
This problem first happened around 6 months ago. Around Feb '11, i experienced the same issue. First thing i noticed was that the wifi suddenly stopped working. To try to fix it, I turned airport off and then couldn't turn it back on and had to restart my machine. Then when closing the lid and then opening it again, my computer would work for about 5 min and then freeze. Nothing worked and I had to shut it down using the power button. Then the problem got worse because the computer started freezing randomly. I know it wasn't an application problem because it happened using different apps. I took my computer to an authorized apple service provider and they told me the harddrive had some bad sectors i think, and they replaced the harddrive because I was still under earranty at the time.
Now, Sept '11, the problem came back. First the airport problem happened and now my computer freezes when waking up, the exact same thing that happened 6 months ago. I went to disk utility and repaired disk permisions and still no solution. My warranty expired last month so calling apple won't be of any help. I installed lion the day it came out and was working without any problems until now, so I don't think lion is the problem.
Has anybody had this same problem with their computer? I don't know what to do or how to tell if my harddrive is causing the problem again.
Thanks

All of the new unibody MBs/MBPs can use (6GB 4X2GB)
But yes you should definitely make sure the RAM is seated correctly and you didn't touch the gold part of the RAM during installation. Though if something was seriously wrong it would have made loud obnoxious sounds while you tried to start up.
Aside from Installation issues, you should reset the PRAM as noted previously. Hold down command-option-p-r at startup until it chimes twice.
OP, looking at Super Talent's website they don't even have 1066MHz chips listed in their DDR3 chips. All I see is a jump from 800MHz (DDR2) to 1333MHz (DDR3).
Either way, I can't imagine you got that great a deal for the RAM that even if it is seemingly the correct RAM you can get better deals in the links I posted in my other post.

H.264 multi-pass re-encoded video freezes after 10 sec (consistently)

When I take an already encoded H.264/AAC movie and re-encode (to enable the fast-internet streaming option) with the same settings with the "Best Quality (multi-pass)" option enabled, the resulting video freezes after 10 seconds, though the sound continues through the rest of the movie. I have tried this on 3 different movies with the same results. When I change the encoding to "Faster encode (single-pass)", the resulting movie's video frame does NOT freeze at 10 seconds and plays normally. I can reproduce this on any already encoded H.264 movie I wish with the same results.
I have Mac OS X 10.4.8 (PowerPC), 1GB RAM, QT 7.1.3 PRO. I also happen to have DivX 6.2.5 Pro and Flip4Mac 2.1.0.33 Player Pro (though I was not converting anything using those codecs).
Any suggestions? SEEMS to be a QT bug to me... Any one else experiencing this
17 PowerBoook (1.33 GHz) Mac OS X (10.4.8) 1GB RAM
17 PowerBoook (1.33 GHz) Mac OS X (10.4.8) 1GB RAM
17 PowerBoook (1.33 GHz) Mac OS X (10.4.8) 1GB RAM

No need to jump through all of the re-encoding hoops to enable "fast start".
Open the file (whatever format) and use "Save As".
This will place your file into a .mov "container" but the fast start properties will be restored.

Y510p bios freezes

Hello there,
As from recently when i go inside bios of y510p it freezes after second or two. It does that everytime i get inside.
I noticed that when i tried to install fresh/format windows 7 and must enable prior booting from CD.
Should i update my bios to the newest version. Curently i have the 3.05

Does the freezing go away after a few seconds or is it permanent? If it starts working after a few seconds it should be fine.
Y510p - i7 4700MQ (Overclocked to 3.6GHz), SLI GT755M, Corsair Vengeance 16GB 2133MHz, Samsung 850 Pro 256GB, MyDigitalSSD SuperBoot 128GB, Intel Wireless-AC 7260, Windows 7 Home Premium (SP1)

Powerbook and SSD - Freeze after wake up?

Hi
I installed a Supertalent 32GB DuraDrive ET2 SSD in my PowerBook G4 12" 1,33GHz and now after wake up it freeze. The keyboard and trackpad show no response any more. I have to shut it down or close and open the lid several times.
I read that some SSDs have to be set to "master" by jumper. But this drive don't mention this option the data sheet.
Has anyboody running this drive in an PowerBook?
Any hint to solve this? I tried already a fresh install. 10.3.9, 10.4, 10.4.11 and 10.5 = the same problem.
Thanks in advance
bookpower

I tried to contact them. Without a jumper it should be master.
The manual say nothing about but it cames with a jupmer an 4 screws in the package.
So I tried it with the jumper on the first pins too.
I tried two similar ssd drives in an PB G4 12" 1,0 GHz, PB G4 12" 1,33 GHz and PB G4 17" 1,5 GHz.
On all PB are the trackpad and keyboard are freezing after wakeup. This happens only with autosleep mode. I thried all setings in 10.4.11
If I close the lid or select the hibernation manualy there isn't any problem.
Also I tried to set diferent hibernation modes via the open firmware (write to disk).
Still I can't use the auto sleep settings.
Can I run any protocol to catch what causes this behavior?

Satellite P500-F12 - Freezes after 5 minutes gaming

I recently purchased a toshiba P500-12F laptop with the below specs, the problem i am having is that every time i try to start a game such as Mount and blade or empire total war, the game works for between 5-10 mins, but then freezes completely and the laptop starts to make a loud buzzing sound. The only way to get out of this is to press down the power button until it shuts down. I do not get the problem with anything other than these type of games and i dont know why it is doing this, any help or adivce would be welcome.
Bradders.
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
System Model: SATELLITE P500
BIOS: PhoenixBIOS 4.0 Release 6.1
Processor: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz (2 CPUs), ~2.5GHz
Memory: 4096MB RAM
Available OS Memory: 4060MB RAM
Page File: 1641MB used, 6478MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
Card name: NVIDIA GeForce GT 230M
Manufacturer: NVIDIA
Chip type: GeForce GT 230M
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0A28&SUBSYS_FF501179&REV_A2
Display Memory: 2781 MB
Dedicated Memory: 1007 MB
Shared Memory: 1774 MB
Current Mode: 1680 x 945 (32 bit) (60Hz)
Message was edited by: Bradders_1

Hi
The forum already contains such threads where notebooks freezes after 5 or 10 minutes of gaming. Did you read them?
At the moment its not easy to say what is causing this problem but first of all you should install the latest display driver from Toshiba. Dont use non-Toshiba drivers because they can cause this overheating!!
Make also sure that you are using the latest BIOS version and its useful to clean the notebook from to time using compressed air spray.

Tecra 9100 freezes after several minutes

My Tecra9100 (P4, 1,8 Ghz) freezes after several minutes. It shows no reaction on keyboard or mouse input.
It doesn't matter whether I'm running WinXP, Linux or just enter the BIOS.
Rebooting the system leads to a shorter period until freezing (several seconds).
First I thought of overheating of the cpu but a small hardware tool shows me that the temperature is normal and the cooling fan works.
Any idea? Perhaps a problem with the VGA?

Hi
Yes, its perhaps something wrong with VGA but I think it could be a memory fault.
Try to replace the modules and check if there are some performance improvements.
If not, the technician should check the notebooks motherboard
You know; Its always not easy to say what could be wrong without any diagnostic procedures

Bios freezes after jumping jbat1 (msi P41-C31)

Similar Messages

Maybe you are looking for