BitLockered clients are not contacting MBAM others are
Hello, I have hundreds of clients that have bitlockered successfully and registered with MBAM but also have hundreds of machines that have encrypted and not checked in with MBAM.
Those that work under the eventlog MBAM -> operation show ids, 1 'applied policy' 19 'registered with MBAM' and 3 'encryption data send'. Those that don’t work only show id 1 'applied policy'.
It’s like the client will not attempt to talk to MBAM. all machines receive the same policy.
Why won’t they check in and how can I force it ??
Before anyone gives the generic answers. Yes i have changed the KeyRecoveryServiceEndPoint and StatusReportingServiceEndpoint to 1 and restarted the service.
By the way im using MBAM 2.0 - standalone not SCCM integrated with a 2 server setup on a single domain.
sure...
error 4 is:
An error occurred while sending encryption status data.
Error code:
0x803d0010
Details:
The remote endpoint was not reachable.
Error 2 is:
An error occured while applying MBAM policies.
Volume ID:\\?\Volume{c0e67f4d-ec35-11e3-8490-f0def17b504b}\
Error code:
0x803d0013
Details:
A message containing a fault was received from the remote endpoint.
Im starting to suspect local firewall. The machines are connected to the network at the time these errors are logged. I have checked i can ping the server from the client machines.
Similar Messages
-
Proxy Error "Could not contact the other system"
Hi
I am getting this error when i run a report which a proxy.
Could not contact the other system
What i need to check?
ThanksHi Prabhu ,
Hope you are using ABAP client Proxy !!
I am getting this error when i run a report which a proxy.
Could not contact the other system
What i need to check?
At ECC side :
> Check the Transaction SLDCHECK is working fine
> RFC Destination LCRSAPRFC and SAPSLDAPI is working fine
> Entry is proper at SLDAPICUST Transaction
Please share the message at XI end as well as at ECC end of SXMB_MONI ?
Regards ,
Edited by: Santosh Rawat on Oct 22, 2009 9:55 AM -
Client can not contact WSUS server.
Hello everyone
I have a WSUS 3.0 server (v3.2.7600.226) and 3 test clients.
The WSUS server is on subnet xxx.xx.30.xx
Client1 is on the same subnet as WSUS (no problem receiving updates)
Client2 is on subnet 52(no problem receiving updates)
Client3 is on subnet 25 (can not contact WSUS, therefore does not receive updates)
All the clients are standalone machines, they do not belong to any domain.
What I tried so far with no success:
disabled firewall on server
tried this fixit on the client: http://support.microsoft.com/kb/836941/en-us
Stopped wuauclt and bits services, renamed
%windir%/SoftwareDistribution folder, restarted services
Read a number of forum posts and blogs but could not find a solution.
Client3 Facts:
It is a fresh windows 7 installation, no updates have been installed.
Can ping the FQDN and IP address of WSUS server.
Unlike Client1 and 2, Client3 can not visit the ISS7 web page when I enter the FQDN on a browser.
Run checkdiag.exe which reported the following:
wuaueng.dll version 7.6.7600.256....PASS
This version is WSUS 2.0
Checking AU Settings
AU option is 4: Scheduled Install....PASS (Option is from policy settings)
Checking Proxy configuration
Checking for winhttp local machine Proxy settings...PASS
Winhttp local machine access type
<Direct Connection>
Winhttp local machine Proxy....NONE
Winhttp Local Machine ProxyByPass...NONE
Checking user IE Proxy Settings.....PASS
User IE Proxy......NONE
User IE ProxyByPass......NONE
User IE AutoConfig URL Proxy.....NONE
User IE Autodetect, Autodetect not in use
Checking Connection to WSUS/SUS Server:
WUServer = http://testserver1.domain.com
WUStatusServer: http://testserver1.domain.com
UseWuServer is enabled....PASS
Please have a look at my WindowsUpdate.log file:
2014-06-10 15:15:05:255 892 cf8 AU Triggering AU detection through DetectNow API
2014-06-10 15:15:05:255 892 cf8 AU Triggering Online detection (interactive)
2014-06-10 15:15:05:255 892 af4 AU #############
2014-06-10 15:15:05:255 892 af4 AU ## START ## AU: Search for updates
2014-06-10 15:15:05:255 892 af4 AU #########
2014-06-10 15:15:05:256 892 af4 AU <<## SUBMITTED ## AU: Search for updates [CallId = {8DE7F082-26CD-4DB7-ACE5-1361F0EECC79}]
2014-06-10 15:15:05:256 892 b2c Agent *************
2014-06-10 15:15:05:256 892 b2c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-06-10 15:15:05:256 892 b2c Agent *********
2014-06-10 15:15:05:256 892 b2c Agent * Online = Yes; Ignore download priority = No
2014-06-10 15:15:05:256 892 b2c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-06-10 15:15:05:256 892 b2c Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-06-10 15:15:05:256 892 b2c Agent * Search Scope = {Machine}
2014-06-10 15:15:05:256 892 b2c Setup Checking for agent SelfUpdate
2014-06-10 15:15:05:256 892 b2c Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2014-06-10 15:15:05:257 892 b2c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-06-10 15:15:05:261 892 b2c Misc Microsoft signed: Yes
2014-06-10 15:15:26:268 892 b2c Misc WARNING: Send failed with hr = 80072ee2.
2014-06-10 15:15:26:268 892 b2c Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used
: <>
2014-06-10 15:15:26:268 892 b2c Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://testserver1.domain.com/selfupdate/wuident.cab>. error 0x80072ee2
2014-06-10 15:15:26:268 892 b2c Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-06-10 15:15:26:268 892 b2c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-06-10 15:15:26:268 892 b2c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-06-10 15:15:47:275 892 b2c Misc WARNING: Send failed with hr = 80072ee2.
2014-06-10 15:15:47:275 892 b2c Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used
: <>
2014-06-10 15:15:47:275 892 b2c Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://testserver1.domain.com/selfupdate/wuident.cab>. error 0x80072ee2
2014-06-10 15:15:47:275 892 b2c Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-06-10 15:15:47:275 892 b2c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-06-10 15:15:47:275 892 b2c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-06-10 15:16:08:280 892 b2c Misc WARNING: Send failed with hr = 80072ee2.
2014-06-10 15:16:08:280 892 b2c Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used
: <>
2014-06-10 15:16:08:280 892 b2c Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://testserver1.domain.com/selfupdate/wuident.cab>. error 0x80072ee2
2014-06-10 15:16:08:280 892 b2c Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-06-10 15:16:08:280 892 b2c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-06-10 15:16:08:280 892 b2c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-06-10 15:16:29:278 892 b2c Misc WARNING: Send failed with hr = 80072ee2.
2014-06-10 15:16:29:278 892 b2c Misc WARNING: SendRequest failed with hr = 80072ee2. Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used
: <>
2014-06-10 15:16:29:278 892 b2c Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://testserver1.domain.com/selfupdate/wuident.cab>. error 0x80072ee2
2014-06-10 15:16:29:278 892 b2c Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-06-10 15:16:29:278 892 b2c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-06-10 15:16:29:278 892 b2c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-06-10 15:16:29:278 892 b2c Misc WARNING: DownloadFileInternal failed for http://testserver1.domain.com/selfupdate/wuident.cab: error 0x80072ee2
2014-06-10 15:16:29:278 892 b2c Setup WARNING: SelfUpdate check failed to download package information, error = 0x80072EE2
2014-06-10 15:16:29:278 892 b2c Setup FATAL: SelfUpdate check failed, err = 0x80072EE2
2014-06-10 15:16:29:278 892 b2c Agent * WARNING: Skipping scan, self-update check returned 0x80072EE2
2014-06-10 15:16:29:278 892 b2c Agent * WARNING: Exit code = 0x80072EE2
2014-06-10 15:16:29:278 892 b2c Agent *********
2014-06-10 15:16:29:278 892 b2c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-06-10 15:16:29:278 892 b2c Agent *************
2014-06-10 15:16:29:278 892 b2c Agent WARNING: WU client failed Searching for update with error 0x80072ee2
2014-06-10 15:16:29:278 892 e50 AU >>## RESUMED ## AU: Search for updates [CallId = {8DE7F082-26CD-4DB7-ACE5-1361F0EECC79}]
2014-06-10 15:16:29:278 892 e50 AU # WARNING: Search callback failed, result = 0x80072EE2
2014-06-10 15:16:29:279 892 e50 AU # WARNING: Failed to find updates with error code 80072EE2
2014-06-10 15:16:29:279 892 e50 AU #########
2014-06-10 15:16:29:279 892 e50 AU ## END ## AU: Search for updates [CallId = {8DE7F082-26CD-4DB7-ACE5-1361F0EECC79}]
2014-06-10 15:16:29:279 892 e50 AU #############
2014-06-10 15:16:29:279 892 e50 AU Need to show Unable to Detect notification
2014-06-10 15:16:29:279 892 e50 AU Successfully wrote event for AU health state:1
2014-06-10 15:16:29:279 892 e50 AU AU setting next detection timeout to 2014-06-10 19:16:29
2014-06-10 15:16:29:279 892 e50 AU Setting AU scheduled install time to 2014-06-11 01:00:00
2014-06-10 15:16:29:279 892 e50 AU Successfully wrote event for AU health state:1
2014-06-10 15:16:29:279 892 e50 AU Successfully wrote event for AU health state:1
2014-06-10 15:16:34:277 892 b2c Report REPORT EVENT: {98C8C30A-23A6-4534-9133-4DCB43C53245} 2014-06-10 15:16:29:278+0100 1
148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 1 80072ee2 SelfUpdate Failure Software Synchronization Windows
Update Client failed to detect with error 0x80072ee2.
If anyone has any suggestions please do reply.
Many thanks for your time.Client3 Facts:
It is a fresh windows 7 installation, no updates have been installed.
I'm having an issue with this statement, although I don't think it's a contributing factor. I'm skeptical how a "fresh Win7 installation" can get a v7.6 WUA installed... Win7RTM shipped with v7.4, and Win7SP1 shipped with v7.5 ... so SOMETHING updated this
machine to WUA v7.6!
Unlike Client1 and 2, Client3 can not visit the ISS7 web page when I enter the FQDN on a browser.
This is your key consideration right here. If the browser can't get to the webserver, then the WUA ain't never gonna be able to get to the webservices hosted on that webserver.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
No contacts in Lync 2013 client and not appearing in others contact lists
Hello all,
I hope someone might be able to help out with this problem, I've been at it for weeks with no luck. I've migrated from Lync 2010 to 2013. All users have been successfully migrated and everything is working for them, except for one user (which i me unfortunately).
When I sign into Lync from any device (desktop, laptop, windows phone, iphone) I do not see any contacts in my organization, but I can find any of the contacts if i search for them. I also don't appear in anyone else's contact list, but they can find me if
they search.
I have tried disabling and removing my account from Lync server, uninstalling and reinstalling the Lync client on my machine, cleaning up all the Lync folders and registry keys on my machine. Nothing seems to get me any closer to getting this fixed.
I did find a discussion
here that is exactly the problem I'm having, but I don'e see a solution there either.
Has anyone else seen this before? Any suggestions or ideas would be very appreciated.
Thanks in advance!I am afraid your Lync account lose the user data contact list when you move user from Lync Server 2010 to Lync Server 2013.
Please try to move the user back to Lync server 2010 to check if the contact list is stored.
You can use the tool DBIMPEXP.exe to back up specific user’ data from Lync Server 2010 and import the data to Lync Server 2013 with the command Import-CSUserData which is introduced in Lync Server 2013.
Before you import the data, you need to use the command Convert-CSUserData to convert exported user data to the data format used by Microsoft Lync Server 2013.
For the details, please check
http://www.shudnow.net/2012/10/09/dbimpexp-exe-functionality-integrated-into-lync-2013-preview-management-shell/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Lisa Zheng
TechNet Community Support -
Oracle 11g or higher client is not installed or not set to Primary Oracle..
Hi all,
I have installed oracle 11g client on my machine. It connecting fine with the server throuhg sqlplus but when i connect my application that is developed in power builder, it prompts an errror message stated 'Oracle 11g or higher client is not installed or not set to Primary Oracle Home'. I have tried different solutions from different posts over the internet but colud not get fruitfull results.
Please help me out in this regard to continue...
Thanks & Regards,
Adil MukhtarAs already said, this looks like a powerbuilder issue, related to how it "finds" Oracle client/oci libraries.
Assuming this is on Windows, you could use Process Monitor from Sysinternals to watch what your app does (e.g. where it looks for dll's). It's a great troubleshooting tool: http://technet.microsoft.com/en-us/sysinternals/bb896645
Google provides some results with similar issues. Maybe you have tried most of it already, but at least as a reference for others: http://lmgtfy.com/?q=powerbuilder+%22oracle11g+or+higher+client+is+not+installed%22 -
How can I be certain the contact list in my iPod touch updates my computer Outlook contact list when I sync and not go the other way? The options in iTunes are not specific enough. In other words, I want to replace the information in my computer Outlook contact list with the data from my iPod touch.
How is your iPod configured to sync music from your iTunes library? In other words, what options and configurations do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
B-rock -
Infrastructure:- (i) One Sql Server 2005 running on Windows server 2003 SP2 for RMS Database Storage.
(ii) ADDC & ADCS (no web enrollment) running on Windows server 2003 SP2. (FFL & DFL set to 2003)
(iii) ADRMS Running on Windows Server 2008.
(iv) Clients are using either Windows 7 with Office2010 pro or Windows 8 with Office 2013.
Question: Users are able to connect ADRMS Server and restrict permission to their documents without any issue. BUT CANNOT open the restricted document even by the owner/administrator. Whenever they try to open restricted docs a message appears " Cannot
configure your computer for Information Right Management at this time. Contact your administrator if this problem continues. "
I checked > 'rms.company.com' is added to local intranet site using IE.
So far I think clients computers are not able to retrieve the rms url.
Kindly, suggest how should I approach to the solution.
NB:- I am new to ADRMS.Hi Ashim Kumar Nath,
Have you registered SCP when installing ADRMS? If you can't remember, you can check this running ADSI Edit, connect to the configuration container in verify if those nodes exist CN=Configuration [server name], CN=Services, CN=RightsManagementServices,
CN=SCP. Right click on SCP and verify that serviceBindingInformation contains your https://rms.company.com/_wmcs/certification server name.
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer. -
Why are my JPEG exports from Lightroom 4 are not displaying on other computers?
When I export JPEGs from Lightroom, they display fine on my computer but when I send them to the client, they are not displaying at all. There is a message saying that the software on the clients computer may not be up to date so I tried updating their software but to no avail.
I know, it's strange. I've never encountered it before. They are definitely JPEGs, although I don't know if the difference between JPGs and JPEGs is anything to consider.
On my computer, 2008 MacBook Pro, OS 10.8.3, they display through Preview. Also, when I upload them to Dropbox, the thumbnails display correctly. I have transferred them to a USB key as my client was not tech savvy enough to grasp Dropbox. When I brought the USB Key to the client and transferred to her MacBook Air, neither the thumbnails nor the photos themselves displayed. I also tried transferring to her PC and the same result.
I was trying to contact Adobe support to see if this was a problem other people had experienced. -
Ok I’m completely lost here....
I’m running Microsoft Windows XP Home Edition Service Pack 3 (Build 2600), I updated iTunes to 11.0.2.25 and some other updates for windows last night on my laptop. I try connecting to download the iOS 6.1.2 update for my iPhone 4 and my iPhone 5 via iTunes. I am getting this message for both "iTunes could not contact the iPhone software update server because you are not connected to the internet. Make sure your internet connection is active and try again." Everything was fine with connecting prior to running these updates because I downloaded the 6.1 update with no problems when it came out.
What I have done so far with which has made no difference:
Checked my internet connection
Changed my internet connection
Signed out of iTunes and then signed back in
Ran diagnostics via iTunes, comes back with: Network interfaces verified- Internet connection failed- Secure link to iTunes store verified
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-02-20 20:40:48.
Disabled firewall, spy sweeper, virus scanner
start>run>cmd> typed "netsh winsock reset"
Rebooted
Checked the parental controls in iTunes
Start>control panel>internet options>connections tab> lan settings> selected the "automatically detect settings"
Deleted iTunes and reinstalled iTunes
When I would "ping gs.apple.com" it would come back with "request timed out" no matter what internet connection I was on, so I went into the hosts file start>my computer>(C:)>WINDOWS>system32>drivers>ect>HOSTS and added "# 127.0.0.1 gs.apple.com". Now it will ping gs.apple.com just fine but still comes up with the "iTunes could not contact the iPhone software update server because you are not connected to the internet" message in iTunes when i try to download the update.
If anyone can come up with any ideas that I haven’t tried, please let me know. This is keeping me back from updating both of my phones along with if anything should ever happen to them; restores as well.im computer is connected i can go to the apple store through itunes but when i plug my phone in i keep getting that alert... i plugged my phone in to update it after the apple loaded the itunes icon and a usb showed up.
-
Hello all, new to the forums.
I've been recieving the error message "itunes could not contact the ipod software update server because you are not connected to the internet". This problem didn't occur at all for the past 2 years of using itunes.
I've already scanned through numerous websites and forums for help, but none of them worked.
This set of instructions resulted in no change to any of the problems, though iTunes lists that as the supposed solution.
# Open Internet Options from control panel.
# Click the Connections tab.
# Click the LAN Settings button.
# Select the Automatically detect settings checkbox.
Others include installing IE7, which that didn't work either.
Can anyone help?Here it is:
Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
LENOVO 2537FC4
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 003DB3100363E3C0
Current user is not an administrator.
The current local date and time is 2011-06-16 17:03:57.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA NVS 3100M
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {505BB17D-FA14-4FA0-9D77-F7998FEBB435}
Description: Intel(R) Centrino(R) Advanced-N 6200 AGN
IP Address: 192.168.0.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Thu Jun 16 16:54:56 2011
Lease Expires: Fri Jun 17 16:54:56 2011
DNS Servers: 192.168.0.1
68.94.156.1
Adapter Name: {610821DE-0532-4C65-839B-B74B65859FBA}
Description: Intel(R) 82577LM Gigabit Network Connection
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {10983C8A-FCDA-4B2F-8A89-E1596BA6B7BA}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection: Broadband Connection
Connected: No
Online: No
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-06-16 15:35:33. -
SCCM 2012 R2 Clients are not retrieving policy
Hi - I know this question has been asked many times before - but I have tried almost everything and a no closer to solving the problem.
Background: Recently a SCCM 2012 SP1 single stand-alone site was upgraded to SCCM 2012 R2. The site is a single stand-alone primary site with a single DP, single MP, using mixed mode
(HTTP). The R2 upgrade ran without any problem and all SCCM components are showing as healthy.
A few test SCCM 2012 SP1 clients were upgraded to the R2 client using client-push.
However the upgraded clients are not retrieving policy from the Management Point. In the Actions Tab of the SCCM client, only Machine Policy Retrieval and User Policy Retrieval are available. But kicking of those actions does not
result in any of the advertised applications, Task Sequences becoming available. Infact Custom Client Settings are not being set either (e.g. Organisation Name in software Center).
I have checked and rechecked the following:
The upgrade of the client completed successfully (checked ccmsetup.log) and the version number went from 5.00.7804.1000 (SP1) to 5.00.7958.1000 (R2).
The MP health in the SCCM console is showing healthy.
The MP access URL's load correctly when run from SCCm client computers
“http://<ServerName>/sms_mp/.sms_aut?mplist” is ok
“http://<ServerName>/sms_mp/.sms_aut?mpcert” is ok
The SCCM clients are assigned to the site correctly – verified via the SCCM client and
ClientLocation.Log
ClientIDManager.Log is not showing any errors
CCMExec.log and ExecMgr.log don't show any advertisements being executed (Execmgr.log is almost empty and only has "Software ditrbution site settings policy does not yet exist on the client). If the client is not yest
registered this is expected behaviour")
The SCCM clients are Approved and NOT Blocked in SCCM
I have attempted to upgrade the SCCM client and also completely removed and reinstalled - and both have the same result (no client policy dpwnloaded)
I have also deleted the above clients completely from SCCM, Run divoery again and pushed the client to the machines again ...with the same result (SCCM client installs, assigns to correct site and then no policy downloaded)
SCCM 2012 Boundaries are configured correctly and assigned to Boundary Groups correctly
The SCCM client’s do not have the firewall enabled
Changed boundary from AD Site to Subnet to IP Address Range: Same issue exists
Uninstalled MP role and reinstalled it: same Issue exists
Tried to connect to SCCm client using 3rd party SCCM Client center tool but cannot connect
??? Not sure what else to try ???Hi all - sorry for the late response.
We managed to resolve the issue after logging a job with Microsoft Support.
The issue was that the SCCM 2012 R2 upgrade corrupted 2 tables in the SCCM Database - leading to corrupt SCCM client policies.
I am pasting the resolution email from Microsoft below:
(NOTE: This may not be the exact sypmtoms you are experiencing so do not implement this fix assuming it will fix your problem!)
ISSUE:
- All clients are unable to download policies from the server
CAUSE:
- Bad policies in the Database
RESOLUTION:
-Issue with PADbID - Run below query against SCCM DB to verify corrupt entries:
SELECT * FROM
ResPolicyMap WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)
Confirmed Bad policies entries in the SCCM database
Run below query to delete the bad policy after which we resolved the issue:
Delete FROM ResPolicyMap
WHERE machineid = 0 and PADBID IN (SELECT PADBID FROM PolicyAssignment WHERE BodyHash IS NULL)" -
I have 5 computers linked to my router. 4 are hardwired and I set it up so that each of the 5 has it's own static address. One of those computers is my DVR security camera system so can monitor my cameras remotely. It was working fine for years and now I can't access the DVR remotely anymore. I notice in the router Setup that the DHCP clients are not showing up as active even though two of the computers are on. I am running XP Pro on these machines and I can PING between them so I know some communication is going on. Also I can access the DVR cameras from my main computer using the internal IP address I assigned to the DVR, but not if I try to use my current WAN IP address.
Would appreciate any advice on troubleshooting this problem.
Thanks
Solved!
Go to Solution.It may have something to do with the firmware of the router. I suggest you should do that. The firmware that you can download from the Linksys website is version 1.0.0.3 Build 2. (http://support.linksys.com/en-us/support/routers/WRT160NL). After the upgrade, reset the router to factory settings (pressing and holding down the reset button). It is best to re-configure the router from scratch also. Try to power cycle your whole network as well.
-
Some clients are not receiving my mail attachments.
Some clients are not receiving my mail attachments. Other recipients of the same email DO receive these attachments. It doesn't matter whether it is a jpg, pdf, doc, or other. Sending from gmail or entourage works, only sending from apple mail is a problem. This has been an ongoing problem for me in Lion and Snow Leopard. I'm new to this forum, so not sure I'm posting in the right area, but I've searched for an answer and can't find anything. Do I need a plug-in or something? I like my apple mail and don't want to switch, but this is a real problem for me. Help, please!
We have the same problem in Snow Leopard, so the problem isn't new. I've been researching this for a while now. Based on what I've read in a whole load of discussions it seems it's an issue in the way Outlook reads the e-mails send by Apple Mail. I've no idea of the technicalities of this but one obvious difference is that Mail's default formatting is Rich Text and Outlook's is HTML, but what do I know.
We've done variuos test with our PC based clients but with no success: Send as Icon; Window's friendly attachement; Mail Attachement Iconiser, etc. Nothing gets rid of the problem entirely. We're a Mac based Public Relations agency and we send image to the media all of the time...and we have no guarantees that they are getting through.
It's frustrating that Mail doesn't have an option, as it does for plain text, to send in an outlook friendly way. To me it's a huge problem and if Apple isn't going to sort it, given that Outlook is the choice of Enterprise and 95% of our clients, then we're going to have to spend thousands and switch to Outlook. Apple have gone to great pains to promote cross-compatibility with PC's and perhaps this is one little example of where they could try harder.
Mail has not had much obvious love and attention for a while and if there's an Apple employee looking in on this thread, perhaps it's time to love it up, give it a few more bells and whistles (without over-complicating of course) and make it sing with Outlook.
My last attenpt is to try Thunderbird as a default mail client; I'm told it doesn't suffer from the same PC compatibility issues. -
Changes are not reflecting in other users
HI all it's urgent
One user abcd who had made some changes is not reflecting to other users after transport, we have 2 clients 100 and 200 ,changes are reflecting in own user id ,we transported with scc1 transaction
with regards
vinodDear Vinod,
Can you explain what did you try to do ? what changes do you make ?
Dimitry -
I upgraded to iPhone 5 but when I back up the Cloud (both wifi and plug-in), changes to my notes, contacts, etc., that I've made on my iPhone are not updating in the Cloud
Hi Gorm019,
If you are having issues with Photo Stream, you may find the following articles helpful:
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
Regards,
- Brenden
Maybe you are looking for
-
I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this proble
-
PLEASEEE HELP ME! "serious error has occured" and now it wont open
So I have been working on a video for youtube, and as always Adobe being a peice of crap shuts down every 5 minutes or so when I am doing a lot of effects or text, but pretty much it doesn't bother me anymore. Until last night I had been working on a
-
Hello, I am using Form10g/Report10g and my AS is windows 2003. I have my report as RDF file and I need to display it on web as RTF format. When I type 'http://report_server?userid=user/pwd@db&report=myreport.rdf&destype=cache&desformat=rtf&mimetype=a
-
Set editable/non-editable checkbox in alv grid
Hi all, How to set a checkbox in alv grid in editable/non-editable. i am using alv gird display function module for this. i tried to used method cl_gui_alv_grid=>mc_style_disabled. but its not working. is it possible to have this functionality in gr
-
Pictures uploaded to photos app not available when uploading through Facebook
I've uploaded pictures to my photos library, which show up in the various albums that I've transferred them to. In Facebook, when I try to upload pictures the recent pictures do not show up when Facebook access's those albums. Earlier pictures are