BLACK BLIP on jpegs in timeline after adding transitions

Two months ago I updated to Ilife 06'........Since that time, after editing some footage when creating a JPEG slide show, I am getting this "BLACK BLIP (about 8 to 15 frames) on every other picture after applying transitions. If I totally delete 1 or 2 pictures prior to the picture with the black blip and reimport each of them, I can then import only -1- transitions at a time, watch it render then import a second transition etc.
ILife 05' allowed me to import multiple transitions and I never had this with 04' or 03'.
Any suggestions for a fix to this problem
G4   Mac OS X (10.4.6)  

PowerDaddy posted a workaround that worked for him:
http://discussions.apple.com/thread.jspa?messageID=2233212&#2233212
Karl

Similar Messages

  • Pictures "snap" after adding transitions

    I'm very frustrated with IDVD. In every movie I make there are a few pictures that, after adding the transition they "flash", it happens usually at the begining of the movie, but not necessarily. It is a random flaw and it comes with a sound that is similar to the sound we hear when the monitor goes to sleep.
    I've tried deleting, clearing the transition and the picture, but whatever stays in its place acquires the same defect. I don't know what else to do, I've tried everything. If someone knows what I should do, please write back, I have loads of clips to make, but I won't until I know how to fix this.
    I've read similar complaints but with video after adding transitions, but mine only happens with pictures.
    thank you,
    Paula

    Hello, Paula,
    I noticed that you posted to the iDVD discussions, but your problem sounds as if it occurs with your iMovie, not iDVD.
    Having a 'flash' with certain transitions has been noted in iMovie postings before. I have had that happen on occasion. The solution for many of us has been to delete the offending transition, and then play the end of the clip preceding the removed transition. You have to play it frame-by-frame, and you may see one frame of all white. Delete this one frame, redo the transition and you should be ok.
    If the video is ok, but there is still a pop/snap/buzz noise, that is also a known problem and has occurred since iMovie 4. This 'popping' noise usually occurs between a silent photo and a video clip.There is no good solution yet, but if you zoom out the timeline until you see the cross-shape of the transition, you can select 'Show volume levels' and manually adjust the volume of the transition. Sometimes I have just lowered and then raised back the volume level bar and the noise has markedly reduced.
    Hope this is helpful to you!

  • Flashing after adding transitions

    Has anyone experienced flashing after adding transitions especially using cross fades. It does not matter what length the effect is. It is frustrating and unacceptable. I have not received one answer in the past. Ever since I added ILife 06 this is is started. Maybe I should get rid of the Ilife update?

    I have had the same thing happen. I dont know why but I have solved it two ways - save, quit and reopen. If that doesnt work delete the transition and replace it.
    15 MBP, 17 iMac, iBook 14, PM7600 G3266, IIvx   Mac OS X (10.4.7)  

  • BLACK BLIP (8 to 12 frames) appears after adding transitions to timeline

    After updating to ILife06' every JPEG imported pic to the timeline has a Black Blip for 8-12 frames. Does anyone have any ideas on how to stop this from occurring? Thanks
    Wayne

    iMovie 6 can experience problems caused by third-party software it inherited from iMovie 5. Here's a list of things to rule out first:
    http://discussions.apple.com/message.jspa?messageID=1852869#1852869
    If that doesn't fix it, please say more about the problem. When you import a JPEG there's 8-12 frames of black added to THAT clip? (Very strange, by the way.)
    All JPEGs? All sizes?
    Say more about the source and dimensions of the JPEGs. Anything unusual about them? What model camera?
    Is the project saved on an external drive?
    Karl
    Dual 1 GHz G4   Mac OS X (10.4.6)   Sony TRV 900, HDTV, Cinema Display

  • Using photos and after adding transitions the clip length changes

    I am making a movie on imovie 11 and as I am adding transitions and music each time I add or change the clip duration changes.  I have it set at a particular time but it changes regardless.  I keep having to change durations of transitions and photo clips in order to bring it back. 

    Try this...
    Click EDIT/TRANSITION OVERLAP
    FULL will borrow frames from the photos to make the transition. The project gets shorter.
    HALF will add frames to the transition so that the project stays the same overall length.

  • Timelines have added "black" for no reason...

    Hi there,
    I'm seriously struggling to understand as to why I'm suffering this problem.
    The deal is I've a fairly large DVD9 project in production and out of the 35 timelines 3 of them have mysteriously added around 30-40 seconds of black to themselves.
    The three timelines in question are made-up of a single PSD and an AIFF file - each of the AIFF files runs for approximately 60 seconds with the PSD running to the same length.
    When previewed in Encore 2 all is well - but when written out the mysterious black appears. My regime of checking involves writing the project out to a folder and then using a software DVD player to check. In this instance I've tried both Nero ShowTime and connected the drive to my Mac and consequently also tried Apple's DVD Player and in both cases the black appears across all three timelines under both players.
    As a trial and error exercise I also constructed the three AVI's in place of the PSD and AIFF combination but to no avail!
    Does anybody have any clues as to what is going on and possibly how I may be able to cure it?
    Many thanks in advance.

    For the record I've identified a fourth timeline in the project that also suffers the problem.
    I've fortunately been able to rectify three out of the four by producing new timelines and dropping the same PDF & AIFF assets onto the new timelines and all is well.
    The latest addition to this 'error', ie. timeline #4, runs for approx. 50 seconds and hangs around until around the 60 second marker before returning to its calling menu [ie., it plays around 10 seconds of black for no apprent reason].
    Still none the wiser as to why this is the case... So, if anyone has any clues then please let me know!
    Many thanks in advance once again.

  • Background disappears after adding a cross dissolve to a keyed clip.

    I have a clip that has a Keying filter (as well as being cropped and scaled down) on it over a white background. After adding a Cross Dissolve to the keyed clip, the white background disappears for the duration of the Cross Dissolve, leaving a black background behind the keyed clip. This black background is present both in preview and after rendering.
    Any advice?

    not positive this will help, but try this:
    remove the transition
    right-click and sselect "make compound clip" (or Option G)
    within the compound clip, drop a white solid under the keyed clip; do not place any transitions at either end of the compound clip.
    return to your storyline / sequence
    place your transition again and see if it's fixed
    if you still do not have a clean dissolve, remove the transition and then click once on the compound clip and go to around 8 or 12 frames before the end and in the inspector, go to the opacity and add a keyframe and then arrow right to the frame before the last frame and add another keyframe and drag the opacity value to zero.

  • SOA Composites not getting deployed after adding AppsLoggerService

    Hi
    I am trying to enable logging for mediator components. I followed this kix page (Fusion Logging and Error Handling for SOA[https://kix.oraclecorp.com/KIX/display.php?labelId=1918&articleId=200788]) to enable the logging.
    After adding the service to use AppsLoggerService I am not able to deploy the composites to the SOA server. However deployment of composites without this change goes fine. To enable mediator level logging I created a ADF-BC service and provided the AppsLoggerService WSDL and in the mplan I craeted a xsl for transformation. I am getting this error on deployment :
    Deploying profile...
    [04:15:09 PM] Wrote Archive Module to /ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:09 PM] Deploying sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar to soa_server1 [adc60091fems.us.oracle.com:6169]
    [04:15:09 PM] Processing sar=/ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:09 PM] Adding sar file - /ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:09 PM] Preparing to send HTTP request for deployment
    [04:15:09 PM] Creating HTTP connection to host:adc60091fems.us.oracle.com, port:6169
    [04:15:09 PM] Sending internal deployment descriptor
    [04:15:09 PM] Sending archive - sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:26 PM] Received HTTP response from the server, response code=500
    [04:15:26 PM] Error deploying archive sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar to soa_server1 [adc60091fems.us.oracle.com:6169]
    [04:15:26 PM] HTTP error code returned [500]
    [04:15:26 PM] Error message from server:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
    <HTML>
    <HEAD>
    <TITLE>Error 500--Internal Server Error</TITLE>
    <META NAME="GENERATOR" CONTENT="WebLogic Server">
    </HEAD>
    <BODY bgcolor="white">
    <FONT FACE=Helvetica><BR CLEAR=all>
    <TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
    <FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 500--Internal Server Error</H2>
    </FONT></TD></TR>
    </TABLE>
    <TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><pre>javax.servlet.ServletException: java.lang.NoClassDefFoundError: org/eclipse/persistence/internal/oxm/record/DOMReader
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:333)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NoClassDefFoundError: org/eclipse/persistence/internal/oxm/record/DOMReader
         at org.eclipse.persistence.internal.oxm.record.SAXUnmarshaller.unmarshal(SAXUnmarshaller.java:325)
         at org.eclipse.persistence.internal.oxm.record.SAXUnmarshaller.unmarshal(SAXUnmarshaller.java:424)
         at org.eclipse.persistence.oxm.XMLUnmarshaller.unmarshal(XMLUnmarshaller.java:532)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.getSchema(SDOTypesGenerator.java:2184)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.getSchema(SDOTypesGenerator.java:2165)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.define(SDOTypesGenerator.java:116)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.define(SDOTypesGenerator.java:112)
         at org.eclipse.persistence.sdo.helper.delegates.SDOXSDHelperDelegate.define(SDOXSDHelperDelegate.java:325)
         at oracle.integration.platform.blocks.sdox.SDOUtils.registerSDOFromTypes(SDOUtils.java:332)
         at oracle.integration.platform.blocks.sdox.SDOUtils.registerSDOs(SDOUtils.java:271)
         at oracle.integration.platform.blocks.sdox.SDOUtils.getPortMetaData(SDOUtils.java:256)
         at oracle.integration.platform.blocks.sdox.SDOUtils.registerSDOs(SDOUtils.java:170)
         at oracle.integration.platform.blocks.sdox.SDOExternalBindingComponent.load(SDOExternalBindingComponent.java:258)
         at oracle.integration.platform.blocks.sdox.SDOExternalBindingComponent.load(SDOExternalBindingComponent.java:33)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployReferences(CompositeDeploymentConnection.java:202)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:94)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:144)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:62)
         at sun.reflect.GeneratedMethodAccessor2555.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
         at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:69)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy199.load(Unknown Source)
         at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:32)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:352)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:217)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:159)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:108)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:96)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:77)
         at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:153)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         ... 6 more
    </pre></FONT></TD></TR>
    </TABLE>
    </BODY>
    </HTML>
    [04:15:26 PM] Check server log for more details.
    [04:15:26 PM] Error deploying archive sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar to soa_server1 [adc60091fems.us.oracle.com:6169]
    [04:15:26 PM] #### Deployment incomplete. ####
    [04:15:26 PM] Error deploying archive file:/ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
    I have tried deploying the composites from the jdev and the terminal but in both the case I am getting the same error.
    Thanks,
    Rakesh

    Hi
    I am trying to enable logging for mediator components. I followed this kix page (Fusion Logging and Error Handling for SOA[https://kix.oraclecorp.com/KIX/display.php?labelId=1918&articleId=200788]) to enable the logging.
    After adding the service to use AppsLoggerService I am not able to deploy the composites to the SOA server. However deployment of composites without this change goes fine. To enable mediator level logging I created a ADF-BC service and provided the AppsLoggerService WSDL and in the mplan I craeted a xsl for transformation. I am getting this error on deployment :
    Deploying profile...
    [04:15:09 PM] Wrote Archive Module to /ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:09 PM] Deploying sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar to soa_server1 [adc60091fems.us.oracle.com:6169]
    [04:15:09 PM] Processing sar=/ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:09 PM] Adding sar file - /ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:09 PM] Preparing to send HTTP request for deployment
    [04:15:09 PM] Creating HTTP connection to host:adc60091fems.us.oracle.com, port:6169
    [04:15:09 PM] Sending internal deployment descriptor
    [04:15:09 PM] Sending archive - sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    [04:15:26 PM] Received HTTP response from the server, response code=500
    [04:15:26 PM] Error deploying archive sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar to soa_server1 [adc60091fems.us.oracle.com:6169]
    [04:15:26 PM] HTTP error code returned [500]
    [04:15:26 PM] Error message from server:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
    <HTML>
    <HEAD>
    <TITLE>Error 500--Internal Server Error</TITLE>
    <META NAME="GENERATOR" CONTENT="WebLogic Server">
    </HEAD>
    <BODY bgcolor="white">
    <FONT FACE=Helvetica><BR CLEAR=all>
    <TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
    <FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 500--Internal Server Error</H2>
    </FONT></TD></TR>
    </TABLE>
    <TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><pre>javax.servlet.ServletException: java.lang.NoClassDefFoundError: org/eclipse/persistence/internal/oxm/record/DOMReader
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:333)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NoClassDefFoundError: org/eclipse/persistence/internal/oxm/record/DOMReader
         at org.eclipse.persistence.internal.oxm.record.SAXUnmarshaller.unmarshal(SAXUnmarshaller.java:325)
         at org.eclipse.persistence.internal.oxm.record.SAXUnmarshaller.unmarshal(SAXUnmarshaller.java:424)
         at org.eclipse.persistence.oxm.XMLUnmarshaller.unmarshal(XMLUnmarshaller.java:532)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.getSchema(SDOTypesGenerator.java:2184)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.getSchema(SDOTypesGenerator.java:2165)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.define(SDOTypesGenerator.java:116)
         at org.eclipse.persistence.sdo.helper.SDOTypesGenerator.define(SDOTypesGenerator.java:112)
         at org.eclipse.persistence.sdo.helper.delegates.SDOXSDHelperDelegate.define(SDOXSDHelperDelegate.java:325)
         at oracle.integration.platform.blocks.sdox.SDOUtils.registerSDOFromTypes(SDOUtils.java:332)
         at oracle.integration.platform.blocks.sdox.SDOUtils.registerSDOs(SDOUtils.java:271)
         at oracle.integration.platform.blocks.sdox.SDOUtils.getPortMetaData(SDOUtils.java:256)
         at oracle.integration.platform.blocks.sdox.SDOUtils.registerSDOs(SDOUtils.java:170)
         at oracle.integration.platform.blocks.sdox.SDOExternalBindingComponent.load(SDOExternalBindingComponent.java:258)
         at oracle.integration.platform.blocks.sdox.SDOExternalBindingComponent.load(SDOExternalBindingComponent.java:33)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployReferences(CompositeDeploymentConnection.java:202)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:94)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:144)
         at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:62)
         at sun.reflect.GeneratedMethodAccessor2555.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
         at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:69)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
         at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
         at $Proxy199.load(Unknown Source)
         at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:32)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:352)
         at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:217)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:159)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:108)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:96)
         at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:77)
         at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:153)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
         ... 6 more
    </pre></FONT></TD></TR>
    </TABLE>
    </BODY>
    </HTML>
    [04:15:26 PM] Check server log for more details.
    [04:15:26 PM] Error deploying archive sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar to soa_server1 [adc60091fems.us.oracle.com:6169]
    [04:15:26 PM] #### Deployment incomplete. ####
    [04:15:26 PM] Error deploying archive file:/ade/rkpanda_mediatorlogging/fusionapps/prc/deploy/sca_PrcPonDisqualifyRespNotifComposite_rev1.0.jar
    (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
    I have tried deploying the composites from the jdev and the terminal but in both the case I am getting the same error.
    Thanks,
    Rakesh

  • Premiere Elements 3.0-Movie clips don't have sound after added to a new player.

    I am addding viedo clips to a new project. Some of the clips have sound. Other do not. Some of them the sound comes in part way through. They all work fine outside the program. Help please!

    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainspector.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115
    More information needed for someone to help... click these links and provided the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679

  • FCP shutting down when I bring jpegs into timeline....

    Hi all you night owls.....
    I am just about pulling my hair out right now. Have a project due in 8 hours; this project is a weekly project that I have been doing for the past 16 weeks. Same thing different jpegs and hdv footage.
    When I drag the jpegs into the timeline (after importing them into thier own bin into the project), FCP just shuts down. I have tried dragging 50 down into the timeline at once, or 5.....there is always one or two jpegs that are red lined, and when I try and render them, it says "general error". But here is the kicker. It doesn't matter which one is at the beginning of the group, the first one always has a red line.
    Any help would be appreciated. I have already tried the "guiness method".....minus the guiness. (yeah, I am 4 months pregnant) but man, one sounds good right now!!!! (you know, shut down the computer, go have a guiness or two, and come back to the computer).

    Trashing preferences and repairing permissions.
    Close Final Cut Pro.
    Go to: Users/your user name/Library/Preferences.
    Drag, "com.apple.FinalCutPro.plist" to the trash.
    Scroll down to the Final Cut Pro User Settings folder.
    Drag, "Final Cut Pro 6 Preferences" to the trash.
    Drag, "Final Cut Pro Obj Cache" to the trash
    Drag, "Final Cut Pro POA Cache" to the trash.
    Go to: Applications/Utilities/Disk Utility
    Select your system disk
    Click on the Repair Permissions button
    Wait for the permissions to be repaired
    Restart your computer

  • Video shaking after adding few elements

    Software : Premiere Elements 11
    OS : W7
    Hello,
    I'm preparing tutorial for a software. I made a video capture of my software with Jing and I got a .swf (I used Jing to the video capture after testing many solutions because this is the only one without bugs and big advertissments).
    So I add my .swf without problem on my timeline, but after adding few elements (voice, pictures, ..) everything begin to shake and to flash. I tried to make it new again, but each time after few elemnts added, averything's shaking.
    I used the "rendering" (I'm not sure how to call that in english, in french it is "rendu") but it isn't chaging anything.
    If you have any idea,s it is very welcome !

    Thanks for your answer. Unfortunatly, I have no choice because there is no other possibilities of extension and I spent already days by tring other softwares.
    The point is : it is working well till there is "too much" others elements. For exemple if I just add voice and 1 or 2 gif, it is ok. But if I had more things, it is shaking and flashing ... so I don't think it is from the .swf. Maybe you know a good freeware to record video on an other extension, witout bugs (all I tried are with big adverstissment or with strange bugs like everything pink and deformed ... ?).

  • Bootcamp no longer bootable after adding and deleting partitions

    I am using a 2014 Macbook Pro with OSX 10.9.5
    I was trying to add a partition to install Ubuntu on and after adding and deleting partitions, my bootcamp partition will no longer boot whether I use rEFIt or bootcamp assistant or normal osx boot menu.
    Judging from the information I got from similar threads on this I think this information will be useful
    Last login: Thu Apr  9 12:05:32 on ttys000
    abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$ sudo gpt -r -vv show disk0
    Password:
    gpt show: disk0: mediasize=251000193024; sectorsize=512; blocks=490234752
    gpt show: disk0: Suspicious MBR at sector 0
    gpt show: disk0: Malformed MBR at sector 0
    gpt show: disk0: Pri GPT at sector 1
    gpt show: disk0: Sec GPT at sector 490234751
          start       size  index  contents
              0          1         MBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640  285122688      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      285532328    1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      286801864    7847992        
      294649856  195584000      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      490233856        863        
      490234719         32         Sec GPT table
      490234751          1         Sec GPT header
    abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$ sudo fdisk /dev/disk0
    Disk: /dev/disk0 geometry: 30515/255/63 [490234752 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE    0   0   2 - 1023 254  63 [         1 -  294649855] <Unknown ID>
    2: 07 1023 254  63 - 1023 254  63 [ 294649856 -  195584000] HPFS/QNX/AUX
    3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    *4: 07    0   0   0 -    0   0   0 [         0 -          0] HPFS/QNX/AUX
    abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$
    It wasnt like this before. Before 3 and 4 had some of the same values from above instead of all 0s. After trying to take advice from threads with similar problems and entering stuff into the command line it became like this. I think I might have messed thing up while looking for a quick fix.
    Can anyone help me with this? Thanks.

    I'm not sure how to edit my replies so I'm just gonna make another reply. I assumed the following values:
    GPT 3 Start
    GPT 3 End
    GPT 3 Size
    NTFS Start
    NTFS Offset
    NTFS End
    NTFS Size
    293378384
    293380320
    1936
    294649856
    1936
    490233855
    195584000
    I followed the rest of the instructions given here. I made sure to enter the second number with a + sign. After doing all of that all these checks worked:
    Test 1 - Does Bootcamp Volume show up in Finder?
    Test 2 - Can you see files in Bootcamp Volume?
    Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
    I've always been able to access my bootcamp files from finder and I can try to boot from System Preferences -> startup disk, from rEFIt and also from my macbooks startup manager that I access by holding down option while booting.
    I'm starting to think I've misrepresented my problem and that I've been looking at the wrong threads. Every time I try to boot windows I get a black screen with the Windows logo and some text saying something like "starting automatic recovery" or something like that. It then takes me to a blue screen displaying an error number and telling me to use recovery tools on the installation media. Maybe this is different from the problems I've been looking at in other threads.
    I've tried using the same USB I used to install bootcamp with but it doesn't give me the option of repairing the installation.
    EDIT: So I figured out how to edit replies. Anyway I just tried to boot into Windows and checked. The black screen with the Windows logo says "Preparing Automatic Repair". The blue screen gives me the error 0xc00000e.

  • After adding folders to iTunes library, now have duplicates of each song

    I store all my music on a separate drive, M:\
    I have a specific file structure setup that has worked for me for years, M:\Artist\Album
    I recently received an iPod for my birthday, and started using iTunes. After adding my music drive (M:\) for inclusion into the library (without "keep..." and "copy..." selected, as to keep my current file structure intact), when selecting "File->Display Duplicates" just about every song in the library has a duplicate, one in the original folder "M:\Artist\Album", and another in "M:\Playlists\..\Artist\Album". I understand that basically somehow iTunes glitched and started in the "M:\Playlist" directory when adding to the library at some point, however I am at a loss as to how. In my actual folders I only have 1 copy of each song, so basically iTunes is making a symbolic link to each song and adding it into the library as a separate song.
    I have over 9000 (must...resist...meme...) songs in my library, and removing and restoring takes quite a while. I'm pretty sure I'm going to have to do this at least once now, but any ideas as to why or advice on how to avoid this particular problem in the future?
    I am pretty set in my ways of my current file structure, since I don't use iTunes as my primary media software, so I would prefer to not have to resort to succumbing to just letting iTunes handle everything the way it wants (I pretty much hate that).
    Thank you for any suggestions you may have.
    EDIT: Is there a way to have iTunes rename/move files when adding to its library to specific folders via custom rules based on ID3 information (i.e. WMP rip settings)?
    Message was edited by: kaziekama

    If you have "Keep..." and "Copy..." unchecked, iTunes will simply reference the existing file, and will not change your file structure, as you correctly note.
    I'm fairly sure that some other program is operating on your files. The "Playlists" folder that you mention has nothing to do with iTunes. On my PC, only Windows Media and Roxio use it.
    To your question +"Is there a way to have iTunes rename/move files when adding to its library to specific folders via custom rules based on ID3 information (i.e. WMP rip settings)?"+ the answer is no. When iTunes rips a CD, it names the files as track number and title, with no option to do differently. And as far as placing the ripped files, they go in Artist/Album, with no option to do differently. As full-featured ripping programs go, iTunes is not even in the race.

  • How do I set up my Imac after adding a SSD along with my existing HD

    How do I set up my Imac after adding a SSD so that my system and apps are on the SSD and everything else is on the HD?  I am using mountain Lion.  I want to make sure I can still do Time Machine backups. 
    I was planning on first formatting the SSD and then using Migration Assistant to copy the System and the Library and the Apps over.  Where it gets confusing is the User account where some of the items will be on the SSD but I want all my folders to be on the HD.  Do I just not copy over that other stuff and once I restart from the SSD it will know where all the folders are?  Is there anything I need to know about setting up a time machine backup after that?  Will the backup I had from the one drive have to be erased and start a whole new backup?
    I just want to do this right so I don't have some major problems.
    Thanks for any help.
    Michael

    time machine backed up your whole system data/everything in time machine hdd.
    you want to use ssd over hdd so you need to put new mac os x in ssd.
    then copy all the stuff that you want to put in ssd.
    from my point of view put the mac os x and other application in ssd and leave other data in hdd.(music,movies,etc....)
    more info about time machine : http://support.apple.com/kb/ht1427

  • What is the expected behavior in a zone after adding a new static route in Solaris 10....

    Hi Folks,
    I have a few Solaris 10 production machines here at work and had a strange thing happen. I added a new route to these machines using the "add route <destination > <gateway>" command and my web applications running in the zones on these machines froze up. The applications that froze had no reason to do this as they have never talked to the machine in this new route. Here is the old route table via netstat -rn:
    Routing Table: IPv4
    Destination Gateway Flags Ref Use Interface
    172.23.248.0 172.23.248.24 U 1 6794 bge1
    204.154.126.0 172.23.248.100 UG 1 0
    204.154.127.0 172.23.248.100 UG 1 0
    204.154.134.0 172.23.248.100 UG 1 0
    204.154.135.0 172.23.248.100 UG 1 0
    204.154.132.0 172.23.248.100 UG 1 0
    204.154.133.0 172.23.248.100 UG 1 0
    204.154.130.0 172.23.248.100 UG 1 0
    204.154.131.0 172.23.248.100 UG 1 0
    204.154.128.0 172.23.248.100 UG 1 0
    204.154.129.0 204.154.129.74 U 1 7980 bge0
    204.68.180.0 172.23.248.100 UG 1 0
    204.68.181.0 172.23.248.100 UG 1 0
    192.168.0.0 172.23.248.100 UG 1 34
    172.28.0.0 172.23.248.100 UG 1 9
    172.29.0.0 172.23.248.100 UG 1 0
    172.30.0.0 172.23.248.100 UG 1 0
    172.31.0.0 172.23.248.100 UG 1 0
    172.24.0.0 172.23.248.100 UG 1 0
    172.25.0.0 172.23.248.100 UG 1 44
    172.26.0.0 172.23.248.100 UG 1 934
    172.27.0.0 172.23.248.100 UG 1 0
    172.20.0.0 172.23.248.100 UG 1 0
    172.21.0.0 172.23.248.100 UG 1 0
    172.22.0.0 172.23.248.100 UG 1 82
    172.23.0.0 172.23.248.100 UG 1 161975
    172.16.0.0 172.23.248.100 UG 1 0
    172.17.0.0 172.23.248.100 UG 1 0
    172.18.0.0 172.23.248.100 UG 1 0
    172.19.0.0 172.23.248.100 UG 1 82
    10.0.0.0 172.23.248.100 UG 1 1766
    224.0.0.0 204.154.129.74 U 1 0 bge0
    default 204.154.129.1 UG 1 8411
    127.0.0.1 127.0.0.1 UH 225713773 lo0
    Here is the route table after I added my one additional route (note the top line):
    Routing Table: IPv4
    Destination Gateway Flags Ref Use Interface
    204.154.129.209 172.23.248.100 UGH 1 5
    172.23.248.0 172.23.248.28 U 1 5757 bge1:3
    204.154.126.0 172.23.248.100 UG 1 0
    204.154.127.0 172.23.248.100 UG 1 0
    204.154.134.0 172.23.248.100 UG 1 0
    204.154.135.0 172.23.248.100 UG 1 0
    204.154.132.0 172.23.248.100 UG 1 0
    204.154.133.0 172.23.248.100 UG 1 0
    204.154.130.0 172.23.248.100 UG 1 0
    204.154.131.0 172.23.248.100 UG 1 0
    204.154.128.0 172.23.248.100 UG 1 0
    204.154.129.0 204.154.129.86 U 1 484 bge0:2
    204.68.180.0 172.23.248.100 UG 1 0
    204.68.181.0 172.23.248.100 UG 1 0
    192.168.0.0 172.23.248.100 UG 1 114
    172.28.0.0 172.23.248.100 UG 1 2
    172.29.0.0 172.23.248.100 UG 1 0
    172.30.0.0 172.23.248.100 UG 1 0
    172.31.0.0 172.23.248.100 UG 1 0
    172.24.0.0 172.23.248.100 UG 1 0
    172.25.0.0 172.23.248.100 UG 1 43
    172.26.0.0 172.23.248.100 UG 1 944
    172.27.0.0 172.23.248.100 UG 1 0
    172.20.0.0 172.23.248.100 UG 1 0
    172.21.0.0 172.23.248.100 UG 1 0
    172.22.0.0 172.23.248.100 UG 1 77
    172.23.0.0 172.23.248.100 UG 1 160823
    172.16.0.0 172.23.248.100 UG 1 0
    172.17.0.0 172.23.248.100 UG 1 0
    172.18.0.0 172.23.248.100 UG 1 0
    172.19.0.0 172.23.248.100 UG 1 0
    10.0.0.0 172.23.248.100 UG 1 183
    224.0.0.0 204.154.129.86 U 1 0 bge0:2
    default 204.154.129.1 UG 1 1850
    127.0.0.1 127.0.0.1 UH 58 225894 lo0:3
    My question is why did my application die and need to be restarted after this one simple route was added? What is the expected behavior in a zone after adding a new route to the root zone?
    Thanks,
    Tom Gellert
    tom.gellert&#64;tellabs.com

    Greg- Dreamweaver CS4/Live View integration with BrowserLab allows you to send interactive states of a local site/design directly to BrowserLab (dynamic data, rollover/mouse interaction states, widget states, et al), and from behind firewalls no less- definitely a scenario we covered.  You can get the extensions (which require Dreamweaver CS4, of course) up on the Labs site: http://labs.adobe.com/technologies/browserlab/

Maybe you are looking for