Blackberry Media Card not recognized on Laptop

I'm trying to sync my media library but when I plugin the USB cabe and select the option "USB Drive" on the device. The Media Card Folder does not come up on the Laptop.
If I go to "My Computer" I can see a new Removable Drive D: but it's not clicable... it says please insert disk in the Removable Disk.
The Media Card is well inserted and available on the Blackberry. Under the "Storage" option of the device I see the 3.6 GB available. Already tried the menu option "repair" and "format" option. That formated the media card but it's still available on the laptop.
On the Blackberry Desktop software if I try to sync Music I get a Message saying "Your device has insufficient Storage to sync Media. Consider using a Media Card.
I have all everything uptodate both on the Blackberry as on the Laptop WIn7 and Blackberryf Desktop Software.
Can anyone help?

I have exactly the same problem. And the new desktop software no longer gives me the option of adding music manually

Similar Messages

Accessing Blackberry media card on mac ?

I am not able to transfer/ Access music files from my blackberry media card to Mac book pro. however i can transfer pictures into mac but cant access media card as i used to do earlier on my HP. lz help tnx

Hey mek363,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You will need to enable mass storage mode to see the media card on the Mac. Follow the steps in this KB article to enable mass storage mode: www.blackberry.com/btsc/KB13564
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

GeForce4 TI Video Card Not Recognized Anymore?

For about almost a year, the fan on the GeForce4 TI video card would occasionally make a grinding noise, although it has always been easily fixed by lightly sticking a finger on the fan to stop it for a second and it would go back to normal.
However, about a month ago this little fix stopped working. The grinding noise was unbearable. After searching the Internet for a few minutes, I found out that I wasn't the only one suffering from this problem, and some even offered tips on how to replace the fan.
I followed the steps very carefully and made sure the card was not harmed. After installing the new fan, which was very easy, I stuck it back into the Power Mac and boot it up. However the monitor didn't find a signal.
I was glad that I installed Remote Desktop on the Power Mac so I was able to connect to it and see what's going on. I opened Apple System Profiler and noticed that the computer isn't properly recognizing the graphics card anymore! Instead of the very detailed information I'm used to seeing, this is what I saw below:
pci10de,a:
Type: VGA-Compatible Controller
Bus: AGP
Slot: SLOT-1
Vendor: nVIDIA (0x10de)
Device ID: 0x252
Revision ID: 0x00a3
I have no clue what this means as it seems like the computer still recognizes A video card. Also this also gave me the impression that the Power Mac is missing the drivers, but that's impossible as I haven't touched the software on the hard drive and nVidia drivers are part of OS X.
If the card is broken then fine, I'll take my losses and buy a new one as I would hate to just throw the computer away since it still more than fulfill my needs. But I just hope the AGP slot isn't broken.
Any ideas? Thanks in advance.

Just for clarification:
You have two systems based on the same MS-7008 mainboard, correct? Both use the same BIOS Version?
In one system, the card is functioning, running in AGP 3.0 Mode x8 and in the other, same mainboard model, what are the symptoms of "video card not recognized" besides the AGP 2.0 Mode x4 limitation?
I mean, if you can see the BIOS Setup, the card is putting something out on the screen, right?

Media GO not recognizing Xperia S

Since the last update (6.2.B.1.96), Media Go stopped recognizing my Xperia S, and it makes PC Companion to hang. So, I cannot make backups, nor syncs nor modify the media inside my phone. I can do nothing. It's not the first time I face this problem. I used to have this kind of issues with my Sony Ericsson W508 also. Is there any known issue?

Good morning,
This morning, Media Go asked to be updated to 2.5a that I do. When reading the post of Eliote87 I have tried to wait to see If the phone is connected later.
I close Media Go. I unlock my Xperia S. I connect my Xperia S to my computer. PC Companion recognize the phone. Windows asked what to do and I answered "Transfer files with Media Go". Media Go opened without connecting the phone.
2 minutes later, the Xperia S is finally connected to Media Go.
I disconnect my phone from the computer and I let Media Go open. I unlock my phone. I connect my phone to my computer. PC Companion recognize the Xperia S after 10 seconds. Windows does not ask me what to do with the connected device (Media Go still running). Media Go does not recognize my Xperia S.
2 minutes 30 seconds later, the Xperia S is finally connected to Media Go.
I disconnect my phone from the computer and I let Media Go open. I open Windows Media Player. I unlock my phone. I connect my phone to my computer. Media Go does not recognize my Xperia S.
7 seconds after connection, both Windows Media Player and PC Companion have connected my Xperia S.
2 minutes 30 seconds after connection, the Xperia S is finally connected to Media Go.
This means that our problem is solved or must be read as "Media GO not recognizing Xperia S below a fair time of connection around 20 seconds".
In addition, why Windows 7 does not ask me what to do with my device when Media GO is running ? Is it due to Media GO ?
Xebeauxa

Media card not being recognized by Media Sync / Dekstop Manager or Windows

I hope someone can help me with this.
I've got a Bold 9000 running OS 5.0.0.411 (the Vodaphone offiical release, not the Bell one). I'm on Rogers though.
I have an 8GB Sandisk card in it which the phone reads fine.
However, Media Sync, Desktop Manager, and Windows 7 64-bit wont read it.
I've done the following to try and fix this:
- Mass Storage Mode Support is "on", doesn't help
- tried reformatting the media card through the phone, doesn't help.
- tried reformatting the media card through Windows, doesn't help.
- tried uninstalling Desktop Manager and just installing the USB drivers, doesn't help.
- tried re-installing Desktop Manager, doesn't help
- tried updating the "RIM Blackberry SD USB Device" driver, no change as Windows says it has installed the right version.
- tried both versions of Media Sync (older and just released version), doesn't help.
- tried another SD card, doesn't help.
- under Computer Management > Disk Management, the SD card shows up, but with no drive letter assignment. If I try to assign one, it doesn't work. Basically if I check anything but "Properties", it tells me there is no drive there.
Does anyone have a suggestion to fix this or should I reload the older OS? Admittedly, I don't know if even that will help because the last time I ran Media Sync on my phone was when I was running Vista so maybe it is not the phone but a Windows issue.
Any suggestions would be appreciated. Been searching for the last two days and can't seem to find an answer.
Cheers.
BB-past: 9000>9700>9800>9780>9810>9900>Z10>Q5

Me too:
BB Pearl 8120 (OS 4.5.0.124)
Windows7 Pro 32bit
BB Desktop Mgr. 5.0.1
Reading/accessing the media card via USB always worked fine in XP, and still works fine in Ubuntu Linux (I could never get Bluetooth to do it at all). With the Windows7 upgrade, suddenly Windows can detect but not read the card. It's detected as a removable disk in Explorer, but when you try to open/browse it, Windows throws up a dialog that says "Please insert a disk into removable disk (F."
The phone sees it just fine, XP sees it just fine, Ubuntu sees it just fine. It's more likely to be a Microsoft problem than a RIM problem, but it's still friggin' annoying. Does anyone know a workaround for this? The Desktop Manager software won't run under WINE for me.

Wifi card not recognized after reboot.

I've got a Lenovo X140e and an Intel wifi card. (Intel Corporation Wireless-N 7260) that I installed myself, since the support for the Broadcom card it came with was spotty.
If I reboot my laptop, the card won't show up with either iwconfig or even lspci. If I do a cold reboot (power down entirely and start back up), it will show up just fine.
What gives?
Relevant lspci output:
01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 4b)
Subsystem: Intel Corporation Wireless-N 7260
Flags: bus master, fast devsel, latency 0, IRQ 38
Memory at f1300000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi

When the card is recognized, rfkill lists it as unblocked; when it's not recognized, it doesn't show up at all.
I've got i3 installed; for connection management I've been sort of trying different things - netctl never works but wifi-menu has been pretty reliable. I haven't installed any special power management stuff at all - I'm not really sure how to find out what was auto-installed?

Pictures from media card not showing up

i've had my Q5 for almost a year now and i've had this problem before and i guess it had just fixed itself in the past, but this time i'm frustratred and have decided to inquire about solutions!
basically what happens is i take pictures like normal and then when i go into the pictures application they're not there. so i tried restarting my phone; now the only pictures that show up are things that i've screenshotted. NONE of the pictures that i've ever taken are showing up. the pictures that i've taken are all stored on my sd card. before you even ask, YES! my sd card is still in my phone.
i guess i figured that when i restarted my phone it would do that thing where the pictures all have to be transferred from the media card to the phone or whatever that thing is.. but it's just not doing that! i've restarted my phone a few times over the last couple days and nothing seems to be working
i hope that SOMEONE can even remotely understand what i'm trying to say & i hope that this problem can be simply fixed! thank you

Hi and Welcome to the Community!
Here are several tests for you to try:
Use your media card directly on a computer (via an SD card reader).
Use your media card in an identical BB that has no issues.
Use an already formatted media card from a different BB on your BB.
The results of these tests will tell you if it is your media card or the media card reader on your BB that is the source of the problem.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HP Pavilion tx1000z - Wireless card not recognized

Model: HP Pavilion tx1000z CTO Notebook PC
Wireless has been working fine - two weeks ago it failed to be recognized.
1. Doesn't appear in Device Manager
2. Wireless switch remains amber.
3. Attempted to use Add hardware - not recognized.
4. Pulled the card and re-installed.
No solution.
So...
Contacted HP and purchased a replacement card.
Installed new card.
No solution. Still failing to be recognized.
All other ports are working to include the wired internal modem.
Contaced HP help and their solution is to send it in to the repair center and for the low price of only $400(!) they'll replace the motherboard. This was after zero troubleshooting on their part.
Any help would GREATLY be appreciated as I'm a deployed soldier and this laptop is my one link to home.
Thanks.

Well I cannot self promote but am actually affiliated with a store that could do the repair, but I will steer you instead to some of our peers. A very lively industry has popped up on ebay for such things. These ads talk about the "no video" problem but the "no wireless" is caused by the same thing. I would communicate with them in advance of buying and make sure they understand it is the "no wireless" problem and I am sure they will explain how they can fix that, too.
This guy does it for $125 flat and has a 100% rating:
TX 1000 repair
Here is another with a 99.6% rating
$115
They are all doing essentially the same repair which has proven to extend the life of the laptop by 12 to 18 months. I think somewhere up to $150 is fair for a year of use on a laptop as you would buy a new one for 4 times that or more and expect to get 3 or 4 years out of it.

SDHC cards not recognized, xD cards read perfectly

I have a problem with the card reader in my HP x18 1080ED notebook.
When I put a 2GB xD memory card in the slot the card is recognized and shows up in My Computer and I can view the contents.
But when I put in a SDHC card, 256MB or 8GB of 16GB, the light besides the reader lights up 8 times and then nothing happens. The card is not showing up in My Computer.
I updated the driver, reinstalled it but no effect. I also check the cards in another computer also HP and the cards work on that computer. What is the problem can anyone help me!
Thanks, hope you can help.

your computer is a dv8-1080ed Correct?
If so it may not support the SDHC type card. I would got to the HP website and search Product information and Troubleshooting tab, in the Manuals section there should be a entry called External Media where it will list the type of cards your system supports. For the dv8-1080ed It doesn't appear that the SDHC cards are supported.

IPod not recognized by laptop's USB 1.0 port

There are a couple of problems here. I have an external hard drive that can only be accessed with a USB 2.0 cable. I had to buy a card with USB 2.0 ports since my laptop only has USB 1.0. When I try to update the iPod (plugged into the USB 2.0 card as well as the external hard drive), everything freezes, goes very slowly, and I can't transfer songs from the external hard drive.
When I unplug the external hard drive I can update songs from my laptop's hard drive, but the iPod has to be plugged into the USB 2.0 card. When I plug the iPod into the laptop's USB 1.0 port (regardless of whether the external hard drive is connected) the iPod is not recognized, it only gets charged.
I tried this iPod on a different computer last night and it worked great.
So two questions: 1) how do I transfer songs from my external hard drive (get my computer not to freeze) and 2) how can I make my laptop recognize my iPod when it's plugged into the laptop's USB 1.0 port?
Thanks a lot

Well... from what i am reading about your post, you want to transfer your music from the external hard drive to your laptop. if this is correct then i think that you should open the hard drive into a window and put all the music into 1 folder and drag it onto your desktop, then once the music is downloaded onto your laptop, (if there is enough space) unplug the external hard drive and use the USB 2.0 port 4 your ipod w/o the hard drive. sometimes when i plug my ipod into my PC it will stop everything for 5 minutes then it starts to work. so i recommend to plug it into the 2.0 and wait a while and see what happens.
Windows XPee

Ipod touch not recognized by laptop

My sister brought her ipod touch over because she forgot her password and wanted me to restore it for her. When I plug the ipod into the usb port in my laptop i get a message saying, "USB device not recognized" and that it has malfunctioned. The ipod won't charge or register at all on my laptop but it will on my ps3 so its not a problem with my usb cable. I have installed all of the drivers and updated itunes. When I plug in a mouse and keyboard they both work perfectly fine so I have no idea what the problem could be.

Device not recognized
http://support.apple.com/kb/TS1538

Why are my PXI cards not recognized by Windows or MAX?

I have a PXI-1045 chassis connected to a PC through MXI-4. When I turn the chassis and PC on with a PXI card in slot 2, the message "Windows could not load the installer for DAQDevice. Contact your hardware vendor for assistance." appears, and the PXI card is not recognized (it is scene by Windows as an unidentifiable PCI Devices, though I have a DAQmx installed).
More details:
Windows XP
LabVIEW 8.0 installed
TestStand 4.0 installed
Latest DAQmx 8.XX installed
NI Scope installed
NI CAN installed
MXI-4 PCI card installed in PC and recognized by Windows (as PCI-PCI bridge, and MXI-4 Device)
I identified PXI chassis 1045 in MAX and on subsequent boot up saw that MAX complained about pxisys or some other ini file (in the chassis status area of the screen) so I configured it as 'other' then put in the PXI-resorce CD and selected the ini file for PXI-1045, MAX no longer complains about pxisys and instead says the chassis is configured properly
If I have nothing but the PXI MXI-4 card installed in the PXI system and boot up the chassis then the PC, I get no errors
If I have a card in slot two (I've tried PXI-6509 Industrial Digital IO, PXI-2569 Relay Module, and PXI-5102 Digital Oscilliscope) and boot the chassis then PC, the message "Windows could not load the installer for DAQDevice. Contact your hardware vendor for assistance." shows up when Windows boots and Windows sees a PCI Device but can't identify any drivers for it.

Hello,
Can you post a screenshot of the problem? Are you switching on the chassis first or the PC? Please make sure that you switch ON chassis and then boot the PC. This typically happens when you have a corrupted installation. I would suggest downloading the latest version of driver from here and re-installing it.
Please uninstall all the driver software from computer before installing the new software.
http://digital.ni.com/softlib.nsf/websearch/d31d46fffb745eca862571490053eab8
Thanks,
Kalyan
Applications Engineer
National Instruments

IPhone 4s is not recognized by laptop even when it's on recovery modeb

I Have been having problems with my iPhone 4s lately it doesn't charge either by the plug or the laptop and have used many different laptops but still it doesn't work I have tried to force it to recovery mode but still it says it's not recognized what do I do please help, I'm also using the latest version of iOS

Hello Sibongile22,
If your iPhone isn't being recognized in iTunes, you may find the troubleshooting steps outlined in the following article helpful:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If your iPhone still isn't charging or responding, you may also find these articles useful:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
Sincerely,
- Brenden

IPod nano is not recognized by laptop

Hi
I just bought a new iPod nano. iTunes doesn't recognize it. It says that the harware driver is not installed. The iPod works normally on my mac but not on the acer laptop which is running Windows Vista.
My previous iPod nano worked normally on the acer laptop.
Message was edited by: Charlieboy161

Well start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Patrick

Built-in Webcam not Recognized by Laptop

My built-in webcam on my Satellite A305-S6905 is not recognized by my laptop!!!
I click on Camera Assitant Software to boot up the cam and get no where.
The error message reads: Webcam is either disabled or failed. Please check your webcam settings.
I have no clue where the webcam settings might be. I have downloaded the driver 2x from the Toshiba recommended downloads: Intel Chipset Software Installation Utility for Windows Vista (32/64bit) / XP(v8.7.0.1007; 04-13-201... I get a message that the download was successful. Then, I check the list of devices in the Device Manager. The Chicony USB 2.0 Camera software is nowhere to be found. I cannot select it to Update the software. I have restarted my computer 2x. No help.
Does anyone have any suggestions? My daughter is leaving for Hong Kong and Vietman and I would like to track her journey using Skype. Thanks, NC
page2

Thank you for the help Jerry, but I already tried that download. After downloading, I recved the following message: “The setup has detected that version (1.07..) of Camera Assistant Software for Toshiba is already installed. This setup installs an earlier version of Cam Asst. Soft for Toshba. You will need to uninstall the previous version (17.193.0508L) before installing this version.”
I have not tried to find the earlier Cam Asst Soft for Toshba version to uninstall yet. Should I find the earlier version, uninstall and download this earlier version?
page2

Blackberry Media Card not recognized on Laptop

Similar Messages

Maybe you are looking for