Block mail notification of moving employee in the organisation structure

Hello all,
When you move an employee in the organisation structure, this employee gets a mail notification of this action. How can i disable these mail notifications?
Regards
Jordi

You can change the Event Scehma in the Alert Management as explained below:
IMG Path:
SAP Implementation Guide ->
Supplier Relationship Management ->
SRM Server ->
Cross-Application Basic Settings ->
Event and Event Schema for Alert Management ->
Define Event Schema ->
-> Select BUS1006003 (Employee) in the table and double click Event Schema
-> Select MA (Employee) in the table and double click Event Control
Here delete the event DEPARTMENT_CHANGED.
This will solve your problem.
Note: If this is needed it can be added again at a later point of time and there will not be any issues.
Regards
Kathirvel

Similar Messages

  • How do you get mail notifications to show up on the lockscreen

    How do you get mail notifications to show up on the lockscreen ?

    Go into settings
    Notification center
    Turn mail on and then set how and for which accounts you want it displayed.

  • Steps required while moving employees from one organisational

    Can any one explain and write down steps required while moving employees from one organisational unit to other organisational unit.
    regards

    Hi ganesh,
    Firstly create the new position for the employee if it is not already existing.
    Then goto SPRO : Personnel Man. -> Pers. Adm-> Customizing procedures -> Actions -> Define infogroups -> infogroup.
    Only Copy 0001 is enough.
    Then Setup personnel actions with this infogroup.
    Then go to PA40 and execute this action for that specific employee.
    You will only need to change the position assignment, org unit, job, vs all come from position info.
    Regards,
    Dilek
    Edited by: Dilek Ersoz on Oct 14, 2008 9:41 AM

  • Inactive employees not showing in the organisational structure

    We have employees who are in positions but may be on extended unpaid leaves of absence which means they have an inactive employment status.  In the organisational structure their position is there, but their name is not displayed.  Does anyone know how we can show inactive employees in the structure? 
    Thanks Tanya

    Hi, this is fine for HR if they are looking in the backend, but when the managers see their employees on the MSS portal, for those inactive employees, they do not see the name, because the view is current.
    Thanks Tanya

  • Issue with the assignment of Employee to the Territory structure

    HI
          User is facing an issue in the assignment of Employee to the Territory structure. When the user is trying to assign a Employee say 'x' to a Terr ID, the following error occurs 'Assignment to item failed,chenges have not been saved'. Item referred in the error is the postion. This error also occurs when the user is removing a present BP from a TerrID and adding a new one.
    The error has a description saying that the position might be locked but i dont see it being locked
    Thanks & Regards
    Neeraj

    Hi Neeraj,
    Could be an authorization issue.
    Check the SAP Online help for guidance, maybe you missed something.
    The direct link below will take you there.
    http://help.sap.com/saphelp_crm50/helpdata/en/9a/7cd5ced51a754b88bbb4a5c664dd15/frameset.htm
    Regards,
    Gervase

  • Can we move the Organisation structure from DEV to Quality to Production?

    Hi Experts,
    Can we move the Organisation structure from DEV to Quality to Production?
    If yes, I believe that we have to change  backend details at some areas.
    Please any one provide procedure and precautions for doing this, In general how we have to proceed?
    Thanks
    Reshma

    Hello Reshma,
    See program documentation from PFAL transaction (ALE distribution of HR Master Data).
    You will need:
    - an evaluation path,
    - a distribution models for sender DEV > receiver QUAL and sender QUAL > receiver PROD for correct message type.
    Regards.
    Laurent.

  • Moving users in the org structure

    Dear Experts,
    Whenever, I move my user in PPOMA_BBP, it brings inconsistency that cannot be repaired.
    What could be the possible reason(s).
    Regards
    Mick

    Hi
    Which SRM version are you using ?
    You can repair the users using the same transaction.Even after that some times the inconsistency persists then delete the employee data and assign the user to the required Org. unit in the Org. structure using USERS_GEN transaction. Also check for the BBP_CONSISTENCY_CHECK transaction for this user (you will get list of errors in Consistency check ).
    <u>Related link -></u>
    How to re-instate the deleted Position of the user into Org structure.
    <b>Please go through the following SRM Reports which will help -></b>
    Program Name                   Report title                                                                               
    RHXSTR00                       Organizational Structure                                         
    RHXSTR01                       Organizational Structure with Positions                          
    RHXSTR02                       Organizational Structure with Persons                            
    RHXSTR03                       Organizational Structure with Work Centers                       
    RHXSTR04                       Report Structure with Persons                                    
    RHXSTR05                       Report Structure Without Persons                                 
    RHXSTR06                       Work Centers per Organizational Unit                             
    RHXSTR07                       Activity Profile for Positions Along Organizational Structure    
    RHXSTR08                       Activity Profile of Positions with Persons Along Org. Structure 
    <u>Also, go through the tables HRP1000 / HRP1001 in SRM.</u>
    <b>Look for "CHDAT" field in this Case, which will give Last changed by ehich user on which date..</b>
    <u>Some related Database Views</u>
    View name                      Short text                                                                               
    HRV1222OT                      Infotype 1222 (OTJID)              
    HRV5500OT                      EBP Function (OTJID)               
    HRV5501OT                      EBP Product Responsibility (OTJID) 
    HRV5502OT                      EBP Location (OTJID)  
    To change the Organization Unit of User, Try this FM - "RH_BUF_GEN_USER_POSITION_ORG" which will assign new org. unit to new position.
    <u>Related links -></u>
    mass user movement from one org. unit to another in SRM org. structure
    Table name of the organization plan
    Org. structure transport via RHMOVE30
    Re: How to get busines partner number from organization id ?
    Re: Org structure table
    How get the Last changed date of Busness Partner
    Report for Org structure change
    Hope this will definitely help.
    Do let me know.
    Regards
    - Atul

  • Is there a setting or an app that shows e-mail notifications without having to unlock the screen...like SMS and missed calls?

    Is there a setting or an app for the iPhone 4 that allows you to see that you have new mail messages from the "lock screen" like SMS and missed call messages?  My primary e-mail account is MS Exchange and I'm running iOS 5.  Thanks!

    Settings > Notifications > Mail > View in Lock Screen > ON

  • Mail Notification after changing the status

    Dear All,
    We had configured the Service Desk in Solution Manager.But the requirement is when we change the status of the request (Suppose from New to In Process or from In process to Proposed Solution, there has to Mail Notification which is sent to the user, who has raised the issue.Due to which it helps to not to monitor continuously about the issue logged by him.
    Kindly Suggest how to trigger the mail automatically after the issue status changes.
    Eagerly waiting for the positive response.
    Regards,
    Amit

    Hi,
    You may have to do some Coding for this.

  • Battery dishcarge very fast - all the app. closed etc: 3G, Push Mail, Notification, Locator still the same problem.

    My Iphone 4 battery incation show 100% and all the application etc. 3G, Push Mail, Notifications, Location Services closed but the battery will discharge
    very fast. After 5 minutes battery indication will showed 98% without using anythings. Battery cycles already make 2 to 3 times still same.

    I had the same situation. I purchased a new phone from the local store earlier in November, but the production week indicated June. Battery was completely dead, and it took quite a while to activate.
    My battery usage life has barely been able to top 4 hours before shutoff.
    If you schedule an appointment, they will be able test your battery.
    One suggestin that might work. Reset and retore as a new phone instead of off your 3G backup. This works for some (but not for me).
    I will be checking back to get a new phone I think.

  • E-Mail Notification for KM Feedback

    Dear All,
    My requirement is to get the E-mail notification for some one posting feedback (repo service) for particular KM resouurces. I have made all the settings
    Configured the Notificator Service
    Enabled the Mailing Service
    Configured the Email channel and Originator.
    I have enabled Subscription for this KM folder like (/documents/Public Documents/Test Folder). If admin upload any document or files in the above folder.
    I received E-Mail notification alert.
    But for the same resources if any one posting feedback or review i didnt get any E-mail notification
    How to achieve this?

    Hi, THILLAI NATARAJAN.
    The Feedback notification comes to the UWL of the person who has created the document (folder).
    No E-Mails are sent, and subscription service does not work in that case.
    If you want to fulfill your requirements you need to create a custom portal component which adds the Feedback to the resource and sends the E-Mails too.
    Regards, Mikhail.

  • Mail notification sticks at "loading" after 8.2

    When I get an incoming email the on screen notification sticks at loading..and stays there...I can access the message if I open it but very annoying..anyone else/fix?

    Not directly, unfortunately. Some posts on the Pebble reddit (where others are experiencing the same problems) suggest that it's an 8.2 bug since downgrading to 8.1.3 fixes the issue and the 8.3 beta is working fine as well. Since I'm receiving text and phone notifications, I solved my mail notification issue by switching to the Gmail app until either the bug (if that's what it is) is fixed or 8.3 comes out.

  • Mail Notifications Not Appearing

    I have just noticed that my mail notifications are not appearing on the side. I have double checked that all of the settings are right, but still no joy. Anyone got any ideas.

    Notification Settings, in System Preferences, should look something like this....

  • BPM Mail Notification - Customizing

    Hi,
    While Configuring a BPM in CE 7.2 SP03, I configure mail notification for new task in the uwl.
    I am able to recieve the mail notification. It displays as shown below:
    Line: -
    Dear Potential Owners,
    You have new task(s) in your work item inbox. To view this task, click any of the following links.
    Direct access to this task:
    http://<host>:<port>/webdynpro/dispatcher/sap.com/tcbpemwdui~taskinstance/ATaskExecution?taskId=bf8b656a440811e0cd5900000924a5aa,
    Your complete work item list:
    http://<host>:<port>/irj/portal/?NavigationTarget=ROLES:portal_content/every_user/general/eu_role/com.sap.uwl.home_ws/com.sap.netweaver.bc.uwl.work/com.sap.netweaver.bc.uwl.uwl_page
    This mail is generated automatically. Do not reply.
    In case of technical issues, contact your IT department directly
    Line: -
    My question is, is it possible to customize this message.
    For example. instead of "Dear Potential Owners", I want to display this as "Dear Patana"
    Please suggest.
    Thanks,
    Patana

    Hello,
    EMail configuration settings have been done in NWA Config tool. However, the mail are not getting triggered from the BPM process. Can you please suggest.

  • Confustion whether wf approval mail notification wasapproved or not by user

    User after receiving the approval notification in mail from workflow is confused whether he has approved or kept in hold. Some times does not know which he has approved if he is checking later after reading the mails of approval notifiction from workflow.
    kindly suggest on this, if user can have confirmation after he has approved a mail notification.
    Thanks.

    Please post the details of the application release, database version and OS.
    In the workflow we recursively send notifications to that user as long as there are some unprocessed records in our custom table. The issue now is the users claim that the mails are not received by them in our live instance. While debugging we noticed that the mail_status is null and status is CANCELED for this particular workflow always.
    I checked the following and they are correct:
    1. Notification 'On Revisit' parameter set to 'Reset'
    2. Checked in fnd_user and wf_local_roles, the user is active and the email id is correct there
    3. No timeout parameters set for this notification
    P.S. Notifications to this user are sent properly when sent from some other workflows. So not sure whether something is missing in the above workflow process. Can you find any errors in the Workflow log file?
    It is really strange that the notification status is CANCELED. The begin and end date are same for such notifications. So these are not canceled by some abort process activities.
    Please suggest.How To Troubleshoot Java-based Workflow Notification Mailer [ID 242941.1]
    Troubleshooting Workflow Java Notification Mailer - Technical Reference [ID 1191125.1]
    A Guide For Troubleshooting Workflow Notification Emails - Inbound and Outbound [ID 831982.1]
    Oracle Workflow Release 12 Diagnostics [ID 469822.1]
    OWF H Diagnostics, Solutions and Information [ID 332152.1]
    Thanks,
    Hussein

Maybe you are looking for

  • DVD Drive won't recognize DVD's or CD's

    I just got a new, refurbished Mac Mini today. The DVD Drive will recognize only 1 out of the 3 install disks that came with the system. It tries to initialize 2 out of the 3 and just ejects them about 15 seconds after I put them in. I tried to put a

  • Criteria TwoStep workflow Issue

    Hi I have criteria workflow, which has two steps.. there are no exit or jump defined in my workflow... Issue: After approval in the first step of the workflow, the content is getting released to the system, not going to the approval for the second st

  • Documents won't download

    I'm using a Learning Lab, so we have 15 iPads syncing to iCloud. Most documents download perfectly well, but a few fail to download in Pages, Word or PDF format. I have tried these things: Change the document on the original iPad, forcing a new save

  • Spot color from Photoshop to Illustrator

    Man, this used to be not a big deal.  I usually print in CMYK, but I am laying out bz cards that need to be black and pantone 200u, just 2 color.  When I transfer the logo from PS to Illustrator the pantone 200 changes values.  I tried putting it in

  • Export to Excel stopped working

    I have two screens that display the same datagrid on one the fields are all lables and the second one has some fields set to be editable. The second screens export to excel button stopped working in the debugger and I get the following error. An erro