'Blu Ray Error Code 6: File Alreay Exists The ES File is Short' Message

I have successfully built my project several times until I edited three files outside of Encore.
These clips are now slightly shorter in length and I have re-imported them back into Encore and re-done the timelines they were in, the chapters and menus. I have saved the project under a different name, but when i come to build the project (Blu Ray disc or ISO) I keep getting the error 'Blu Ray Error Code 6: File Alreay Exists. The ES File is Short' and it aborts the build process.
Using CS5
Any ideas?
Thanks

Sometimes session files get corrupted when burn a project again and again or changing the assets.
If you remove session files from you project then while burning Encore will create new session files and this problem may resolve.
Remove the session files from AuthorScriptHDMVSessions folder
Session file location -
/<Project path>/AuthorScriptSessions
Remove this folder and try to burn the project
Thanks,
Pankaj Gauba

Similar Messages

Blu-Ray Error Code 0 with BD-RE CS4

I have been using a BD-RE as a test run disk and I have rewritten
to it about 4 times from Encore 4.
Blu-Ray Error " ",Code:"0"0, Note:"
I get the above error now when I try to burn to the BD-RE, but I can
burn BD-R with no trouble. I think the disk got corrupted in some way. I have been extra careful
when handling the disk because I wanted it to last alot longer than 4 burns. I have been checking the box for "Auto Erase Rewriteable disk". I did a quick erase with some software that came with my LG internal BD burner. The other software says that the disk is empty. I still get the error from encore, though.
Anybody know what's happening?

I've experienced Encore evaluation is quite approximative.
This is not a problem, if you know it.
An almost 22Gb file could reach the BD-R size limit (although it is 25) .
Usually, I stay bit down to this value.
Anyway I do not know what Err 0 means, 'cause an "extraload" should be displayed as "too big for media" or something like this.
This is what happens in my italian Encore when I exceed.
I've also experienced, times ago, that a BD-RE (Kraun, if I remember correctly) had a smaller size compared with a BD-R one.
With the same project, I was able to burn a BD-R and not the BD-RE.
Anyway, when you'll do the image, remember to check this is a BD-RE image and not a BD-R (bottom of the window).
Ciao
Giorgio

Blu-ray Error Code 0

I am trying to burn a Blu-ray disc from a Blu-ray image I made in Encore CS3 and it returns a Blu-ray Error Code 0 Note "". No idea what the problem is.
I am using the Sony BWU-200S burner with Imation's 25GB BD-R with AquaGuard. The Encore project shows that there is 4.32 GB free on this project, 20.68 used.
Any ideas?
I tried the xml parser install but it says my Windows XP SP2 system already has a higher version.
I verified the project settings are using a preset. I exported the video from Adobe Premier Pro CS3 using a Matrox Axio export preset. It's 1440x1080i video.

After a little more toying around, it seems that while the project itself used only 20.68 GB, with the extra information that I guess Encore adds to the disc, it exceded 25 GB by a little. The error was trying to tell me that I exceded the capacity of the BD-R. It would be nice of Encore would show the total capacity of the disc used, whether burning from the project to BD-R or burning from a Blu-ray image to BD-R.

Blu-ray Error - Code 6

Jeff I NEED your help!!!! I have read all they say about you and your accurate answers when being attacked my many lol.
I´m trying to build a Bluray project and it marks no errors when checking it but then after a while building the iso image i get this :
Blu-ray error:File already exists",Code:"6", Note:Video buffer underflows. Total bitrate is too high near time...
I have imported all again and again and still get the same. Let me mention that I am not a pro so I´m sure i did something wrong, but i don´t know what.
I hope ypu can help me. I am using m4v´s and wav´s for my movies exported from pro cs6 and using pre designed menus from Pro motion. I have no problem when building a dvd following their steps in their tutorials but when it comes to bluray...I can just kick myself. I´ve been doing this for 2 weeks now and ran out of options.
Please help, and thanks in advance!!
Andon

go back to http://forums.adobe.com/community/encore and enter
code 6
in the area just under Ask a Question
You may now read all the previous discussions of your error
be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

Blu-ray Error Code 25 Note: Not Enough Hard Disc Space

I'm trying to make a Blu-ray image on my computer and recieving an error that states:
Blu-ray Error
Not enough free storage, "code 25" Note: Not enough Hard disc space
Now I first thought to check my hard drive but I have plently of space. Next I noticed that encore CS3 was trying to make an image that is 340GB in size!!! Why would it do that? My project only has 4 assets. HELP this is going from bad to worse.

My longer notes on this error:
The most common workaround for this is to build to a folder and burn with ImgBurn (for PC) or toast (for Mac).
Searches show that there has not been success in many situations. I do not believe that it is one problem.
I have generally believed that the error refers to temporary storage on the hard drive. And users underestimate the amount of temporary hard disk drive space used. For bluray it is about twice the disk or more.
Some users experience this error when they are creating dual layer BD disks, and a layer is more than 25G. Each video/layer must fit on one side.
And some users successfully burn their disk by re-encoding to a lower bitrate (a 25G BD disk does not hold 25G). Encore uses padding to predict the size on disk (e.g. add 10% to the amount of space it predicts that build will use), and it can be wrong.
Always good to "run as administrator, though I don't know that ever fixed this issue if someone wasn't.
For CS4 there was a required update for a Roxio component. I believed this was a temporary problem due to the combination of Win7 and Encore CS4, but users on newer OS and Encore have reported resolution of problems after installing the patch.

I have trouble to burn a blu-ray, error code 0

Hello,
I have edited a movie in final cut X, after 20min a would like to make a blu-ray to see the result on my HD TV.
It renders en make the files (H.264 + AC3) The burn program come up's, en note that there is a blu-ray disc en ask to delete all the data of the disc before writing. I click "yes". After a well the process stops with error 0?? Lack off disk space. I have 400GB free, and its a clean 25GB Blu-ray disc. If i check in the finder, my disc is created end named en if a open the movie with VLC it plays perfect! If i put the blu-ray in my PS3, nothing happens!
If i make a blu-ray disc image, sometimes it go to 95% end stops. Otherwises i get the full disc image. If i write this with toast, i get 2 black bands on my HDTV, end the movie is stretched. Al the settings are correct.
If i make a movie with the same project but delete everting exept off 5sec. Everthing go's perfect en i get full screen image on a SD card inserterd on PS3
-I try to make a new project en copy my projectfiles
-I duplicate the project without render files
-I make a fresh start with the same footage
all the same result! This on lion(external disc) end 10.6.8
I think this come's doing the update tot 10.0.3???
please a need help with this?

Could you take a screen shot of the error message and post it?
Can you export a master file OK?
Russ

Blu-ray Error code 25

I am trying to burn a Blu-ray DVD the disc Info says 6.56 is used and 18.44GB is free. I am using a 25GB sony Blu-ray DVD. The error code says there is "not enough free storage", Code:"25", Note: "not enough hard disc space".
Is this a problem with the DVD or my computer.
The external hard drive where the rest of the file is for this project only has 1.92GB available. Is this my problem?
Thanks
ms

I'm posting this even though it may sound like a 'duh' comment.
I was trying to burn my first Blu-Ray DVD on a new BD-RE (rewritable disc), and I was getting a "not enough free storage" Code "25" error. I knew file sizes were not an issue, as my test DVD was less than a gig, and I have over 300 GB free on my hard drive.
The problem: Rewritable DVDs need to be formatted before they can be used.
You may go 'duh!' but that's one of those things that is clear only when known. Now I know.

Blu-ray error:"file already exists", code "6" , Note : 118240 11771552 11826176

It has been a 3 days that i have try to make Blu-ray .ISO image on Encore CS5, i always have that message: Blu-ray error: "file already exists", code "6" , Note : 118240 11771552 11826176. Everything seems to work fine before.
Windows 7 Ultimate 64bit,
Intel Core i7-2600K Sandy Bridge 3.4GHz,
CORSAIR CWCH50-1 High Performance CPU Cooler, ASUS P8P67 PRO,
G.SKILL Ripjaws X Series 16GB,
EVGA GeForce GTX 460 (Fermi) 2GB ,
Matrox MXO2 with MAX,
COOLER MASTER HAF 932 Black ATX Full Tower Computer Case,
Adobe CS 5 Production Premium
thanks in advance

Thank you ram8kumar. I will answer step-by-step, as you did:
- there is no subtitle in the project
- .PSD file is not to large, 2 files 1920X1080 and only 2-3Mb, and they only used as menu (I did this a milion times before), there is no slideshow in the project
- Disc name is not blank
- there is no sledeshow (burning a slideshow with no pan and zoom or with no transition with H264 settings)
Lest two might be the problem.
- I exported .h264 files from PPro CS5 with Matrox MXO2 Mini with MAX, Matrox preset and if I remember right target was 30Mb/sek
- Audio and video track duration in the timeline was 1(one) frame difference.
Thank you agan, and I will post the results as soon as I will get done with it.
Vladymyr.

Blu-Ray Error: "file already exists", Code: "6", Note"video buffer undeflows. Total bitrate is too

Hi,
I have just installed CS6 upgrading from CS4. I am doing a large project (2.5 hours of video) and have transcoded 6 sections successfully from Premier Pro using VBR-1 - the default. I saw somewhere on one of the forums that this may be a problem, but I cannot work out how to change to VBR-2 as it suggested or CBR for that matter. I have added a second sound trak and to enure this was not the problem I deleted it again.
I have tried several different options in Encore, and by increasing the max bit rate it seems to get further along, but I get the identical error. Currently, without the second sound trach and with a max bit rate of 40 it writes 4.1gb of the 31.0 gb file (it's a double layer blu-ray).
Any ideas?
Piccadillypunter

Thanks for the update idea - I had looked for Creative Suite updates, but they dont show there - don't know why.
I have now applied updates to Premier Pro and Encore. I also re-transcoded all assets from premier pro using VBR-2 with a target just under 23 and a max rate just under 25 (it wouldn't let me get 23 and 25 but just a fraction under in both cases). I then set up a completely new Encore project to ensure there was no "carry over" and tried again. This time it gets 12gb into 29gb of writing the file and then gives the same error, but with a different ridiculous number -1.04nnnn.
I'm out of ideas. Does anyone anywhere actually successfully use CS6 to write Blu-ray images - or this simply a marketing ploy for something that doesn't actually work?
This is sooooo frustrating - it gets so close, but then this bitrate thingy is a killer. Does anyone know what the actual problem is - or is it a furfie - (that maybe an Aussie expression - is it really not thast problem but that is what shows)
Hope someone can help me.
PiccadillyPunter

Adobe CS5 error Build .iso - Blu-ray Error: "device error", Code: "3", Note: "File can not o

Hi am trying to create a bluray image .iso i loaded the gritty submenu and modified it and am getting this error
and when i try to build it it giving me this error
Blu-ray Error: "device error", Code: "3", Note: "File can not open.(/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/Gritty Noir Submenu HD_mm_1.m2v.00_00_00_1.1.1_UTC.ves) -
Anybody encountered this problem? Thanks I appreciate it.

Hi,
Remove the all the files from
/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/
This will resolve this issue.
This happens if any file corrupted in Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/ folder
Thanks,
Pankaj Gauba

Blu-ray error device error code "3" create sequence fail to write m25 file

Continue to get this error message when outputting to blu-ray, can burn to dvd just fine. It seems I have experienced this issue in the past but don't recall how I resolved.
tried re-saving to new file name.

I found 3 other discussions... one of them may help
Re: Blue ray Error - "Device not ready", Code:"3", Notes - Any ideas what this means?
Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064
Blu-ray Error: "divide error", Code: "3", Note: "AS_StorageError = -97060

Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File.

I keep getting this error message about 11gb into burning a 22gb Blu-ray. "Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File." I have tried just about everything from running as administrator, starting a new project and changing the disc too. I am using CS6 and going crazy... any ideas?

Hi,
First try to create Bly Ray Image Under option 'Output" Select BluRay Image, and also select the destination to create Image and click on Build, It will create a BluRay Image with extension of .iso. Now to burn BluRay Disc, you need to Select BluRay Disc under 'Output' Option and Below under 'Source' Option select BluRay Image instead of current project and Select the destination where you have put .iso Image, Then click on Build and it will burn BluRay disc.
In simple , First create an Image then Burn that image to BluRay .
I hope, it will help you.
Thanks

Please help: Blu-ray error - file error - video buffer underflows

Hi all,
Just got a new video editing system and Blu-ray burner and was very excited to test out Blu-ray burning. Unfortunately I keep getting the following error whilst burning my timeline:
blu-ray file error: file already exists - code 6 note: video buffer underflows
The timeline consists of just one AVC video track and an ac3 track.
Any help would be greatly appreciated!
Cheers
Ben

Hi Jeff,
Thanks for the input but none of those solutions worked. Tried renaming the project but to no avail. I am using Vista 64bit so that MSXML solution is irrelevant too.
Interestingly I hit a buffer underlflow problem with Vegas DVD Architect 5.0 when I make a project with non transcodable elements. I literally have no idea why I am having these problems, but its pretty upsetting that I bought this whole new system, including Vegas and CS4 just for video, and I cant create a Blu-ray disc with either software!
Cheers
Ben

Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064

Hello,
I am becoming increasingly frustrated with Encore as it now seems that I cannot burn a bluray to a disc. I would love to be able to talk to someone in support at Adobe but that does't seem to be an option. I have attempted to burn a video that is 18.45GB (transcoded) to a 25GB BD-R disc with the following error received on both attempts:
"Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064"
I don't understand this error because there should be plenty of room on the disc? I also had an issue a few weeks ago with Encore preventing me from burning a 20.4GB transcoded movie onto a 25GB disc. This may be unrelated and I am aware of the issues in Encore regarding the calculation of file size, but why am I now experiencing issues all the sudden?
My configuration:
Mid-2012 MacPro
OSx 10.8.5
Adobe Creative Suite CS5.5 (Encore CS5.1)
Internal MCE Technologies Blu-ray burner
I appreciate any help and support!!

The Code 3 AS_StorageError comes in many variations.
Google: encore "AS_StorageError=-97060" and you'll find a bunch issues. Now replace the 97060 with your specific code (97064) and you'll see there are no finds other than your thread.
These all appear to have physical storage, hard drive, or media issues. Keep in mind that for Blu-ray especially, Encore uses a huge amount of temporary storage.

Blu-ray Error: "device error" Code: "3", Note: "AS-StorageError = -97060

I just wasted 2 Blu-Ray discs trying to burn a project. I was trying to burn a very simple project: a two-chapter Blu-Ray with two 55 minute episodes of a TV show on it. I have used the exact same computer recently to do exactly the same job with success, so I don't know what the problem is.
There are no menus in the project: it's just a bare-bones auto play disc with stereo sound only. The disc shows 24.37 GB used on a single-layer BD.
The files are conformed and as the build begins, the following error pops up:
Blu-ray Error: "device error" Code: "3", Note: "AS-StorageError = -97060
System info:
Windows 7 Professional
Service Pack 1
Intel i7 8 cores @ 2.80 GHz
12 GB 1600 RAM
AMD Radeon HD5870
WD 3TB HD 7200 RPM NTSC file system
Pioneer BD-RW BDR-206 ATA burnerncore
Adobe Encore CS6

I do not see another example of this error with the "97060" in it.
I never trust my recollection of this, but note that the 24.37 GB may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get a different error, but who knows.
I would try building to a folder to see if that succeeds. Then you can return to the issue of burning. Many of us prefer ImgBurn for burning rather than Encore.

'Blu Ray Error Code 6: File Alreay Exists The ES File is Short' Message

Similar Messages

Maybe you are looking for