Blu-Ray Error: "file already exists", Code: "6", Note"video buffer undeflows. Total bitrate is too

Hi,
I have just installed CS6 upgrading from CS4. I am doing a large project (2.5 hours of video) and have transcoded 6 sections successfully from Premier Pro using VBR-1 - the default. I saw somewhere on one of the forums that this may be a problem, but I cannot work out how to change to VBR-2 as it suggested or CBR for that matter. I have added a second sound trak and to enure this was not the problem I deleted it again.
I have tried several different options in Encore, and by increasing the max bit rate it seems to get further along, but I get the identical error. Currently, without the second sound trach and with a max bit rate of 40 it writes 4.1gb of the 31.0 gb file (it's a double layer blu-ray).
Any ideas?
Piccadillypunter

Thanks for the update idea - I had looked for Creative Suite updates, but they dont show there - don't know why.
I have now applied updates to Premier Pro and Encore. I also re-transcoded all assets from premier pro using VBR-2 with a target just under 23 and a max rate just under 25 (it wouldn't let me get 23 and 25 but just a fraction under in both cases). I then set up a completely new Encore project to ensure there was no "carry over" and tried again. This time it gets 12gb into 29gb of writing the file and then gives the same error, but with a different ridiculous number -1.04nnnn.
I'm out of ideas. Does anyone anywhere actually successfully use CS6 to write Blu-ray images - or this simply a marketing ploy for something that doesn't actually work?
This is sooooo frustrating - it gets so close, but then this bitrate thingy is a killer. Does anyone know what the actual problem is - or is it a furfie - (that maybe an Aussie expression - is it really not thast problem but that is what shows)
Hope someone can help me.
PiccadillyPunter

Similar Messages

Blu-ray error:"file already exists", code "6" , Note : 118240 11771552 11826176

It has been a 3 days that i have try to make Blu-ray .ISO image on Encore CS5, i always have that message: Blu-ray error: "file already exists", code "6" , Note : 118240 11771552 11826176. Everything seems to work fine before.
Windows 7 Ultimate 64bit,
Intel Core i7-2600K Sandy Bridge 3.4GHz,
CORSAIR CWCH50-1 High Performance CPU Cooler, ASUS P8P67 PRO,
G.SKILL Ripjaws X Series 16GB,
EVGA GeForce GTX 460 (Fermi) 2GB ,
Matrox MXO2 with MAX,
COOLER MASTER HAF 932 Black ATX Full Tower Computer Case,
Adobe CS 5 Production Premium
thanks in advance

Thank you ram8kumar. I will answer step-by-step, as you did:
- there is no subtitle in the project
- .PSD file is not to large, 2 files 1920X1080 and only 2-3Mb, and they only used as menu (I did this a milion times before), there is no slideshow in the project
- Disc name is not blank
- there is no sledeshow (burning a slideshow with no pan and zoom or with no transition with H264 settings)
Lest two might be the problem.
- I exported .h264 files from PPro CS5 with Matrox MXO2 Mini with MAX, Matrox preset and if I remember right target was 30Mb/sek
- Audio and video track duration in the timeline was 1(one) frame difference.
Thank you agan, and I will post the results as soon as I will get done with it.
Vladymyr.

Blu-ray Error: "file already exists", Code: "6", "Audio buffer underflows. Total bit rate too high

Hopefully someon can help me out here - I'm stuck in my tracks. I'm reading through lots of threads on this topic, but don't understand what is going wrong here. CS6. Note: I have used Encore prior to put this material on a disc. I presently have a separate sequence paired down with only about 1/5 of the whole production. 1920x1080i, 29.97, H.264 Blu-ray, VBR 2-pass, PCM inside PP to produce .m4v/.wav. Here is what is confusing me - I tried a target of 10 and a max of 20 and I still get this error. I have tried different max bit rate "Default Transcode" settings in Encore as well. Note the time code listed "0.000000" - maybe that tells someone something. I don't really understand Encore yet, so maybe it is something I set wrong in Encore vs. my exports?

There are many similar, but not identical errors. And I assume you had already followed John's advice to review older threads. It is true they never quite pin a single set of issues down.
What specific version of Encore? Updated to 6.0.2.004? Encore staff once said updates solved some of these errors.
You say .wav for source files in Encore. But what format in the project? ac3?
Your versiono f the error is different from other one I see because it has a "audio buffer" rather than "video buffer" underflow.

Please help: Blu-ray error - file error - video buffer underflows

Hi all,
Just got a new video editing system and Blu-ray burner and was very excited to test out Blu-ray burning. Unfortunately I keep getting the following error whilst burning my timeline:
blu-ray file error: file already exists - code 6 note: video buffer underflows
The timeline consists of just one AVC video track and an ac3 track.
Any help would be greatly appreciated!
Cheers
Ben

Hi Jeff,
Thanks for the input but none of those solutions worked. Tried renaming the project but to no avail. I am using Vista 64bit so that MSXML solution is irrelevant too.
Interestingly I hit a buffer underlflow problem with Vegas DVD Architect 5.0 when I make a project with non transcodable elements. I literally have no idea why I am having these problems, but its pretty upsetting that I bought this whole new system, including Vegas and CS4 just for video, and I cant create a Blu-ray disc with either software!
Cheers
Ben

Please Help Me! Encore giving error message on Build: "fatal error", Code: "6", note: "video buffe

Hello,
I have been trying to build a project (a 50gb Blu Ray disc) for the last couple of days and I keep getting an error message I have never gotten before. The error says: "fatal error", Code: "6", note: "vide buffer underflows Total bitrate is too high near..."
I don't know why this is happening. I build this entire project from the ground up once before using the exact same assets but I accidently deleted that project file so I had to put it together again. But it was practically identical. And it would build the project just find. I deleted the cache folder. I deleted the main video timelines and recreated them. I made sure the transcode settings for bitrate were not too high. I did everything I can think of.
Can someone please help me? I have no idea what to do now. The frustrating thing is that the error message doesn't tell me what asset the problem is with or anything. This is a rather complicated project. I have two full length movie files (about 90 minutes each) and seven video special features. I have five audio tracks and a couple of subtitle tracks. I don't have any idea what asset is causing the problem!
But I used all these same assets before and I built the project perfectly. And it is not the subtitles because I deleted the subtitle tracks and I still got the error message.
Is there any way of knowing what assets are causing the problem? How can I fix this?
I have a number of people who are waiting for the completion of this disc so I need to get this resolved pretty soon.
Thanks.

The error says: "fatal error", Code: "6", note: "vide buffer underflows Total bitrate is too high near..."
What is the rest of the error message?
What version of Encore and what operating system?
using the exact same assets
What format? Already transcoded m4v/a3c 5.1 or what? Does Encore show them for Bluray as "Do Not Transcode"?
What were the export settings, particularly bitrate?
Is there any way of knowing what assets are causing the problem?
Not through the error message.
Rather than deleting elements to see what causes it, I would add elements (e.g. you got the error, deleted the subtitle tracks, and still had the error, leaving the possibilit that a cache or similar is contining the problem even if the subtitles caused it).
So add just the menus and timelines, no extra audio, no subtitles,
When starting a new project, make sure you are using a new name for the project.

How to fix 'file already exists, code 6' cs5.03 win7 64bit bluray please

hello,
at the last part of a 31gb bluray h264 iso image burn
encore stops responding for 20 minutes (disappears from task manager
and performance monitor entirely) and then says 'code 6 file already exists'
the same error has occurred twice at the very end of the build
i cleared the preferences each time
any help is appreciated...
jeffrey

hello,
after a lot of reading and
some digging, figured out
how my system does things:
when you tell encore to write a bdmv folder
you come out with 2 folders: bdmv and a temp folder
using image burn you load up the first bdmv folder which contains
the streams, etc.
then tell image burn to load up the certificate folder
which is hiding in the temp/db/certificate directory
very clever...
disc burns successfully and menu navigation in tact on pc
and on hdtv through set top bluray
thanks for all the help...
have a great day...
jeffrey

Blu-ray Error: "file not found", Code 8 and "Fatal Error", Code 6 Bug Resolution

Hello All,
After 4 wasted hours, I found that a Blu-Ray build will fail if the name you give the disc (altered from the default, "Untitled Project") is over a certain number of characters. The interesting thing is, a DVD build using the same timeline and chapters (if you have to author both SD and HD discs) will work fine. I do not know the number of characters that should be the limit, but Encore allows more than that limit. Beware, this was a time suck that cost me a day. Hope this helps someone.
Best Regards,
Mike J

Also...
Long File Names Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Plus, you do not state your version, but for CS4...
Encore CS4 Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS

File already exists " Code 6 "

After transcoding a large Blu Ray project I keep getting this error message.
Does anyone have any suggestions?
I get the same error trying to produce Blu Ray ISO image or Blu Ray Disc.

The only error that I have ever gotten in En was the same as yours, or very close (do not recall the Code 6 part). In my case, I had a "template" Project, with the initial setup, and folders, plus some common Assets in it. I was then doing 17 Projects with unique Assets added to each. Everything worked perfectly, until # 15, which was almost identical (except for the unique Assets) to the first 14. Never found what was wrong with #15, but I just grabbed that "template" Project, Imported the unique Assets, altered my Menus, as before, and then all was good. Projects 16 & 17 authored without a hitch. I still feel that there was some OE on my part, with #15, and I must not have committed it with #15A. In my case, most of the real work was done in the "template," so it was not an issue for me to start over, but knowing exactly what I had done wrong, would have been nice.
Good luck, and glad that you got the Project finished, AND with some improvements along the way.
Hunt

Another save for web devices error - File already exists?

I've been using the same Photoshop CS4 on Windows 7 for about a year now, and only now this problem occurs to me.
Whenever I try to preview gifs in any browser (tried a few), I get the error message "Could not complete this operation. A file by this name already exists."
Tried renaming the files, replacing them, creating new ones, tried to enter preview on old files that previously worked, but always get the same error message.
I did some research and tried deleting both the main Save for Web and Devices pref file, and the other so called "hidden one" in the plugins folder. I've tried reinstalling photoshop from scratch. Nothing works.
Please help me. I'm near desperate :/

Ah, sorry, now I see what you're doing.
I haven't had the issue myself, but I can guess that one or more of the temporary files it needs to create in order to show them in your browser must be failing in creation. Check the permissions on the folder identified by your TEMP environment variable - you should have Full Control of your TEMP area..
Specifically, it creates a "Save for Web" subfolder there. You might be able to delete that entirely in order to start afresh.
Just to test, I've opened Photoshop CS4, entered Save for Web & Devices, and pressed the Preview button myself and it worked okay here... Your TEMP area is likely different than mine.
-Noel

I have a digital copy blu ray and it says my code is not valid?

There is no alternatives to click and get it. I bought the blu ray a while ago but just got my mac and want it on the cloud. It is the dark knight DVD digital copy. Anyone have a similar issue and resolve it. I put the code in exactly like it is written in the case.

Thanks hatstead - I'd rather not change my ID email as we vowed to stop having 10s of different emails and passwords, but keep just 2 or 3 - and (idiotically) they are all @ this domain.
But maybe I'll have to set up a gmail one for this. I'd rather not use personal as it's a company purchase.
Is there a way of just registering a product from within my Apple ID, online?
Thanks!

Blu-ray Error - Code 6

Jeff I NEED your help!!!! I have read all they say about you and your accurate answers when being attacked my many lol.
I´m trying to build a Bluray project and it marks no errors when checking it but then after a while building the iso image i get this :
Blu-ray error:File already exists",Code:"6", Note:Video buffer underflows. Total bitrate is too high near time...
I have imported all again and again and still get the same. Let me mention that I am not a pro so I´m sure i did something wrong, but i don´t know what.
I hope ypu can help me. I am using m4v´s and wav´s for my movies exported from pro cs6 and using pre designed menus from Pro motion. I have no problem when building a dvd following their steps in their tutorials but when it comes to bluray...I can just kick myself. I´ve been doing this for 2 weeks now and ran out of options.
Please help, and thanks in advance!!
Andon

go back to http://forums.adobe.com/community/encore and enter
code 6
in the area just under Ask a Question
You may now read all the previous discussions of your error
be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

Database Adapter Configuration Wizard "File already exists" error

I'm uding JDeveloper 10.1.3.1 on an XP machine running Java 1.5.0_06 and having trouble editing SOAOrderBooking.bpel as part of the tutorial.
The tutorial calls for me to drag a new Database Adapter onto the diagram, select the "soademo_ssn" database and, on page 3 of the wizard select "Perform an operation on a table" and have only "Select" checked.
When I click "Perform an operation on a table", the 5 tickboxes enable and are checked but the mouse pointer remains as an hourglass. If I press "Next" without doing anything else, the Wizard title changes to "Select Table" but never draws its controls, aside from the "Back" etc buttons along the bottom and the decorative graphic to the left. If I do try unchecking boxes to have only "Select" selected, every check box state change generates the error "File already exists" and the path of the .mwp file whose name I specified earlier. The file does exist, but it didn't before I entered the wizard.
I've tried with three different filenames, and with two different database connections- both of which check out fine when I do "Test connection" in their property pages from the Connection Navigator.
If I delete the file after each check state change, I can stop the errors appearing after I untick each checkbox, but the wizard still hangs on pressing "Next" whether the file is there or not.
Does anyone have any suggestions?

I am facing the same issues.
I want to pick the new files and retain the files after polling.
Any idea on this would help me to solve this issue.
Thanks in advance.

'Blu Ray Error Code 6: File Alreay Exists The ES File is Short' Message

I have successfully built my project several times until I edited three files outside of Encore.
These clips are now slightly shorter in length and I have re-imported them back into Encore and re-done the timelines they were in, the chapters and menus. I have saved the project under a different name, but when i come to build the project (Blu Ray disc or ISO) I keep getting the error 'Blu Ray Error Code 6: File Alreay Exists. The ES File is Short' and it aborts the build process.
Using CS5
Any ideas?
Thanks

Sometimes session files get corrupted when burn a project again and again or changing the assets.
If you remove session files from you project then while burning Encore will create new session files and this problem may resolve.
Remove the session files from AuthorScriptHDMVSessions folder
Session file location -
/<Project path>/AuthorScriptSessions
Remove this folder and try to burn the project
Thanks,
Pankaj Gauba

Adobe CS5 error Build .iso - Blu-ray Error: "device error", Code: "3", Note: "File can not o

Hi am trying to create a bluray image .iso i loaded the gritty submenu and modified it and am getting this error
and when i try to build it it giving me this error
Blu-ray Error: "device error", Code: "3", Note: "File can not open.(/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/Gritty Noir Submenu HD_mm_1.m2v.00_00_00_1.1.1_UTC.ves) -
Anybody encountered this problem? Thanks I appreciate it.

Hi,
Remove the all the files from
/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/
This will resolve this issue.
This happens if any file corrupted in Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/ folder
Thanks,
Pankaj Gauba

Blu-ray error device error code "3" create sequence fail to write m25 file

Continue to get this error message when outputting to blu-ray, can burn to dvd just fine. It seems I have experienced this issue in the past but don't recall how I resolved.
tried re-saving to new file name.

I found 3 other discussions... one of them may help
Re: Blue ray Error - "Device not ready", Code:"3", Notes - Any ideas what this means?
Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064
Blu-ray Error: "divide error", Code: "3", Note: "AS_StorageError = -97060

Blu-Ray Error: "file already exists", Code: "6", Note"video buffer undeflows. Total bitrate is too

Similar Messages

Maybe you are looking for