Bluetooth Canono Printer: will it work?

Hi all,
I just wanted to know if any you has a PIXMA iP6220D Canon Bluetooth printer, just to be 100% sure that it will work with my iMac (... I've already ordered it...)
The driver is UB and updated for Intel-based Macs (driver version 4.1.6), however -- as far as I can understand from the Canon website -- it refers to the printing options and not to the Bluetooth setup.
http://www.usa.canon.com/consumer/controller?act=SupportDetailAct&fcategoryid=25 7&modelid=11863
The guy at the Apple Care didn't know it for sure, since the Canon PIXMA iP6220D is not listed in the Apple official supported printers page.
Thanks in advance for your help.
Ciao,
Antonio

According to the Epson support page for Mountain Lion it will work. Drivers should be available through Apple's Software Update.

Similar Messages

Printer will not work after update to Mavericks

I have a macbook pro and an HP7280 printer connected wirelessly. After upgrading to Mavericks the printer will not work. The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading) When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed. So I deleted the printer and reset the system and then added the printer back on - same thing. Any ideas??

It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

HP-2840 needs new drum (Q3964A) and I am told my printer will not work when I install a new drum

My HP2840 laser jet All-InOne has been telling me for 6 months that I need a new drum. I was waiting until I saw an issue with my print quality (which I never had a problem) and now my printer will not work unless I replace the drum.
A friend told me that even after installing a new OEM drum, that my printer will still not work unless I call HP and pay for them to tell me how to make it work.
Is that true?
I need help fast cause now my wife is really angry that I "broke" the printer!
Thanks in advance!

mmcnel01 wrote:
Is this an official HP forum?
If so, is there anyone from HP - maybe a moderator or someone, that will respond to my question?
This is a user to user forum and is not an official link to HP support. I would suggest that you contact HP as shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Since upgrading to OS X yosemite my printer will not work.

Since upgrading to OS X Yosemite my printer will not work.

I found the solution in another thread. Thanks to frankglyn who posted it there.
I've just copied it here, as this seems to be the most active thread on this subject.
The solution (steps A to C) worked fine for me and others and should work for you as well, until Kodak will come with an updated driver. Then, you can revert the changes as also described below (steps 1 to 7)
A) in Spotlight Type Terminal and then press enter.
This should bring up the terminal window/program.
B) In the Terminal type sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
It will ask for your password.
C) After that type following: sudo launchctl stop org.cups.cupsd
After that if you are lucky the printer driver should start to work. (which it did in my case)
I hope this works out for you, if not then you can do following to revert the changes:
In case you want/have to revert the changes:
1) Open the terminal as usual (Spotlight type Terminal hit enter and wait for the terminal window to appear)
2) then type: cd /etc/cups
3) then type: sudo nano cups-files.conf
4) 'type in your password'
This brings up a command line editor which you can use to edit the file
5) Remove the last line which says Sandboxing Relaxed
6) press 'ctrl x'
And then confirm with y when being asked if you want to save the changes
7) after that type sudo launchctl start org.cups.cupsd

I upgraded from leopard to lion and my epson printer will not work. I get a communication error

I upgraded from leopard to lion and my Epson printer will not work. I get a error message comunication error. What can Ido to fix this I bought a new USB cord and it did no good.

I suddenly had the same thing happen. I've had my new iMac for 3 months and at first my Epson Artisan 50 worked okay then yesterday I started getting the same error message other people on this support site have gotten. I tried ALL the advice given (deleating the Epson files from the library folder, etc. reinstalling older software) and nothing worked. With the newest iMac (and operating system) you cannot pick and choose which version of Epson software you want. You must use the 10.8 version or it simply will not open when you've downloaded it. Finally I found the comment above by den.thed and tried the OS X Mountain Lion: Reset the printing system suggested. As much as I hated to lose all my printing presets that took a lot of expiermentation to set up, I was desperate. I tried it and it worked. Now I just have to consult my old computer and try to recreate all my printing set ups. So to others with Epson / Apple 10.8 issues this may help when everything else fails. Thanks den.thed for your advice.

HP Photosmart C6180 All-in-One printer will not work

Printer worked one day and the next day it did not and now will not turn on. I did not turn it off. It went off all by itself. Only 3 years old and not over used. Have checked outlet and power cable. Green LED light comes on when connected to outlet but as soon as I connect it to the printer, the light goes out and the printer will not turn on. Is it dead?

I have the exact same problem
Where do we find a solution

Printer will only work connected with USB direct to computer

A few weeks ago I was printing a long document. In the middle of it, it went on hold. Since then I cannot print wireless with either of my computers. If I plug the USB direct from the printer to the computer the printer will work. I cannot print wireless. Do I need a new Airport?

Welcome to the discussions!
+Do I need a new Airport?+
Try a simple reset of the printing system as follows:
Make sure that the printer is plugged into the AirPort Express and everything is powered up
Open System Preferences on the dock and click Print & Fax
Right-click or control-click in the area where you see the printer listed
Select Reset Printing System
Click the + button
Highlight your printer on the available printer list
Click Add
Does that provide any help?

PLEASE HELP ipone & Silvercrest CRB - 530 Bluetooth Car Radio will it work?

I am thinking of buying a Silvercrest CRB - 530 Bluetooth Car Radio from Lidl. It comes with bluetooth mic etc. Will it work with my iphone 3GS please help????
Thanks

Hi.
Silvercrest CRB-530 Bluetooth from Lidl works great with iPhone 3GS. Bought this Radio a few days ago and installed in a few minutes. Radio connects with IPhone in a few second by signal of car-ignition.
Only the voice-dial is not supported. Re-Dial works fine.
I like this radio.
G.

HT1338 since updating to Mountain Lion my HP 8180 all in one printer will not work and shows it as idle and pipe broken it connects via WIFI

since updating to Mountain Lion my HP 8180 all in one printer refuses to work it show as "pipe broken" and printer as idle can anyone help please

do you mean the printer? ive already tried that without success any further help apprecaited

Connected Deskjet 6940 to computer with windows 7 64 bit, duplex print will not work?

I have a Deskjet 6940 model C8970A. The Duplex printer function does not work. It will manually ask me to turn around all the pages to print on the other side. Before it would print front then back of page at a time. I have Windows 7 64 bit on the new computer.

Hi,
The Duplex Unit is disabled by default, make sure to enable the accessory as following:
Enter Control Panel > Devices and Printers
Right click the HP Deskjet 6940 icon, then click Printer Properties.
Select the Device Settings tab.
Set the Duplex Unit as Installed, click OK.
Now set Print On Both Sides as Automatically from the Printing Preferences Dialog.
Please let me know if you may still experience any issue,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Downloaded update, now printer will not work.

After downloading the newest update yesterday - the printer (HP Officejet Pro 8500A Plus) will not respond. The MacBook Pro message shows that it is printing. Nothing is happening.
This happened after the last update also and it took 3/4 hour with my tech support to get the printer reinstalled. I can, of course, go through that process again, but there should be an easier way.
1. The update should not shut down the printer connection.
2. It shoult not take so long and so many steps to get it connected again.
Any suggestions?

Have you contacted HP to see if you need to download any of their updated drivers?
Have you tried repairing permissions and restarting your computer afterwards?
Which os are you using?

Printer will not work on window 7

I have a Lexmark 4200 series printer and downloaded the cd on windows 7. It will not print. I try installing the program and then I was going to try and reinstalling but when I do it says you can't install until the printer is through printing??

Open Devices and Printers in Control Panel. Right-click the printer in questions and click Remove Device.
Install a printer
Is this the driver download?
cjb4200Win7en.exe
If you wish to discuss this further, tell us which computer you have.
-Jerry

Help, Upgraded to Yosemite and now my HP Laser jet 1320 printer will not work!

Two days ago I upgraded to Yosemite on my Imac. Now my HP 1320 Laser jet will not print at all!!! I need a printer for my eBay business ASAP and this is not good. The printer is a driver version 19.8 Is it compatible with the new program? I am so frustrated.

Hello k1watt,
Thanks for using Apple Support Communities.
From your post I see that you're unable to print to your HP LaserJet 1320 series after upgrading to Yosemite on your Mac. I defintely understand how frustrating this is, especially since printing is vital to your business. The printer driver version 19.8 is the most current version available. To troubleshoot the issue however where you're unable to print, please follow the steps in the article below.
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel.Note:If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
UseSoftware Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Deletethe affected printer, thenaddthe printer again.
If the issue persists, try these additional steps:
Resetthe printing system, then add the printer again.
If the issue still persists,resetthe printing system again. Download and installyour printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Troubleshooting printer issues in OS X - Apple Support
OS X: Printer and scanner software available for download - Apple Support
Take care,
Alex H.

Kodak printer will not work after upgrading to Yosemite.. Please Help

I have uninstalled and re installed my kodak 5250 more than once and it still does not work. I have carried out a clean install of my Yosemite OS and still no joy. How do i fix this?

I've got the 7250 as well -- same exact issue. I sent an e-mail to Kodak support on Friday last week -- haven't heard anything, but they did ask for 2 business days time to respond.
I've been running the Yosemite Beta on one of my machines for a few months now and my printer stopped working on that one after the upgrade. I kept Mavericks on my other Mac until this weekend, and printing still worked from that machine until I upgraded to Yosemite over the weekend.
I've got Linux and Windows virtual machines that can print to the ESP 7250, so I can still print, albeit with the hassle of firing up a VM and printing from there... I sure hope Kodak responds! I offered to help them test any beta-quality drivers they may have, so -- we'll see what they say!
I've been planning to ditch the printer and get a new one, but I'd rather not have to do it right this minute just for a driver issue :-/

Bluetooth Canono Printer: will it work?

Similar Messages

Maybe you are looking for