Bluetooth SPP not shown

Hi,
a while ago I bought a Nokia 3250 phone and in the manual it says that it supports SPP next to a list of other services. When I try to enable it in the Bluetooth options, though, it only displays DUN.
A friend of mine was suggesting that Windows is the problem and I should switch to Linux as I really need to get this going because this project is part of my graduation. If anyone has experience please advise me whether it could help or not
Thanks in advance!

I want to write a little app on the phone that initiates a connection to the previously paired PC and communicate with Hyperterminal through a serial port. In the end I want the phone to send a string to the PC which is then printed in Hyperterminal.
The project was originally to connect to a BT relay, but as they cost quite something I wanted to simulate a BT relay, using the PC instead of the relay. The relays are mostly controlled the same way, by sending a string with a special command to the controller. The message doesn't matter, so I just want it to send "start" and "stop" to the PC, which then proves the success by printing it out. The phone doesn't even need any confirmation, just this one sting needs to be printed.
The problem now is that I can't initiate a connection from the phone and/or stay connected with the computer so that I could figure out a way to connect to the COM port. I was searching for the cause and found that the only service advertised is DUN. I thought this could be one of the problems behind it.
What made me wonder was that in all the websites that describe how the phone installs it says that in the end it should show 2 COM ports which should be noted for further use later on. With me it never showed them.
I also tried connecting with another system, Vista instead of XP. What really surprised me is that it shows about six services all dependent of SPP, but not SPP itself. So I was wondering if perhaps the system just can't handle it. Maybe Linux can help...?
I'm also going to get a new Bluetooth dongle to test whether the one I'm using at the moment is faulty.
So yeah. I'm stuck with not being able to connect to the PC without initiating it first from the PC and not being able to connect to the COM port.
Thanks a lot for your answer! Hopefully we can work it out

Similar Messages

Bluetooth is not shown in taskbar while driver softwear has been updated

I have bought this product last week. Everything was OK but I have seen a message notification on taskbar where mentioned " your bluetoth driver's update version is available". I clicked on that and download as well as install that driver, but after installing that driver, I am not seeing the bluetooth Icon on taskbar. Please help to solve the problem
Thanks You

i think u need to add hyperlink component to the node thus cause node must carry hyperlink or anything u like to add like staticText or checkBox ....
add this code after creation the aRootNode and childNode
it may works :)
Hyperlink h = new Hyperlink();
h.setText(cRs.getString("categoryname"));
childNode .getFacets().put( childNode .CONTENT_FACET_KEY, h );

Z10 - new contacts saved on smartphone, but not shown in contact list

Hello everybody,
I have a problem with my Z10. It does not show me any new contacts in the contact app on the phone. After entering a new contact through the app (from HUB and directly) it won't be shown in my contact list. Not even the phone no in the HUB has been replaced by the name. Sending a new contact from BB9810 by Bluetooth does not even get the contact into the new contact list (even though it's been saved).
Anyway, the contacts have been saved somewhere in the phone, since I can sync them with the BB link on my laptop. Also entering a contact in my windows contacts and syncing the other way around (from laptop to BB) does not get me the contacts into my BB contact list.
Has anybody experienced the same issue, or can advise me where to change settings or do something that may get everything back to normal?
Thanks a lot in advance
mateng

Do this for me.
Do a simple reboot on the BlackBerry in this manner: Reboot: On the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
Now, after the reboot is complete, give it a couple minutes and check your Contacts app again for those missing contacts.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hp pavillion dv9502au notebook pc broadcom wireless adpater not shown in device manager

Problem: hp pavillion dv9502au notebook pc broadcom wireless adpater not shown in device manager
System Type
hp pavillion dv9502au notebook pc
Windows editon
Windows 7 Ultimate
System
Processor       AMD Turion(tm) 64 X2 Moblie Technology TL-56 1.80GHz
Installed Memory   1.00 GB (895 MB usable)
System type              32-bit Operating System
Wirless TECH
Broadcom Wireless
Problem
1. I have a switch at front left of laptop which can be slided to switch on Wireless Connections
2. IT turns red when switched off and blue when switched on as normal
3. But only thing that turns up is Bluetooth connection and no broadcom wireless connection
4. No adapter is shown in the devmgmt.msc( device manager)
5. I tried installing broadcom drivers to reslove the problem, and restarted many times for install.
6. I tried the "reset thing" after removing the battery that experts said about.
7. I was atlast forced to use Wired conneciton using ethernet( i hate it because, i can't be mobile around the house)
8. Please Help
Windows 7 Ultimate
System
Processor       AMD Turion(tm) 64 X2 Moblie Technology TL-56 1.80GHz
Installed Memory   1.00 GB (895 MB usable)
System type       32-bit Operating System
Wirless TECH
Broadcom Wireless
Problem
1. I have a switch at front left of laptop which can be slided to switch on Wireless Connections
2. IT turns red when switched off and blue when switched on as normal
3. But only thing that turns up is Bluetooth connection and no broadcom wireless connection
4. No adapter is shown in the devmgmt.msc( device manager) (network adpaters shown are
                                     NVIDIA geforce adapter, bluetooth adpaters)
5. I tried installing many broadcom drivers to reslove the problem, and restarted many times for install.
6. I tried the "reset thing" after removing the battery that experts said about.
7. I was atlast forced to use Wired conneciton using ethernet( i hate it because, i can't be mobile around the house)
Please help

Your wireless adapter is defective.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Does Palm Pre Support Bluetooth SPP Profile?

I am a developer for a software company. I write all the application software mainly for Windows Mobile to control our hardware in the field using Bluetooth SPP Profile, or Serial Port over Bluetooth. Some clients have asked if they can use their Palm Pre phones to control our hardware.
Does Palm Pre support SPP?
Post relates to: Palm IIIc

At this itme the PRE does not support the SPP profile.
These are the profiles currently enabled on the PRE;
HSP 1.1, HFP 1.5, PBA, A2DP, AVRC, PAN
version 2.1+EDR
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/pre/p100eww/sprint/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Some fonts are not shown correctly in LabVIEW 2012

I found a bug related with fonts in LabVIEW2012 f3 KR.
- When I select NI7SEG in font selection dialog, right font is not shown in the example box.
- Draw text at point.vi shows same problem for some fonts while other fonts are working.
I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google.
So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK.
* OS: Windows 7 32bit KR

Just now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana

IPC/VC: Knowledgebase/KB of ECC is not shown in CRM

Hi,
we would like to use the Variant Configuration in CRM.
Today we are using already the IPC in a standalone environment with an external system (IPC 5.0, the external system is using the IPC in the Java environment of ERP). From the same ECC System we would like to download now the knowledge bases to reuse them in CRM 7.0. All knowledge bases and runtime environments are already available. When I download the object SCE (with certain filters), I can see all those entries in table COMM_CFGKB in CRM.
Anyhow, when checking the material in CRM (e.g. commpr01 or WebUI), no knowledge base is shown!
The table COMM_CFGKB has exactly the same entries as ECC (Active = T, KB Usage 10, KBOBJNAME and Version filled etc.), but anyhow it is not shown at all in CRM. As these knowledge bases are very huge, I have tested also a very small and easy one. This one is getting downloaded the same way and has the same entries in table COMM_CFGKB and it is also visible in commpr01.
So my assumption is that the other KBs are not 100% correct. When checking them in ECC (cu36) I get many warnings and errors. Anyhow, they were downloaded to CRM (but won`t be shown). Business says that these warnings/errors are OK and that the external system which uses the IPC in ECC is not having any problems.
Question: is there any chance of using a KB in CRM which has warning/errors when it was generated in ECC?
Is there any chance of manipulating the KB before it gets imported into CRM. I have found Note 1044682 which explains a BADI.
Which tables/fields do we have to manipulate so we are able to use the KB in CRM.
As mentioned: business is aware of those errors and excepts that there might be a crash in the IPC for certain combinations.
Thx
Guido

Hi Christophe,
OK, I think I understand your suggestion: you use the same IPC with your CRM as well as with the ECC system. So in CRM you just maintain the URL and a user in XCM to the "same" IPC. You mentioned that we need to download anyway the SCE. This is somehow logical as this is the base connected to CRM, but what is not clear to me is the fact, that if the SCE KB is used via ECC all SAP R/3 fields are available (like VBTYPE of the sales order where you have values like B or C). In CRM we use the same SCE KB but here these fields are not availble as the sales order transaction customizing in CRM does not contain such a field. Where is the logical link between the values which are available in IPC and the SCE?
Thx
Guido

Voice memos sync not shown in iTunes

I am trying to sync my voice memos to iTunes a couple of times. They are not shown. I haven't updated my iPhone 5s to the latest software yet. It's still running iOS 7; my iTunes was updated though. Does anyone have a solution for this?
Thank you!!!

You need to open iTunes on your computer. Then select music library from the left-hand. Then in the search window on the top right of the screen type in voice memo . The voice memo should now appear in the list is available music in the middle of the iTunes screen

Satellite U400 - error - Bluetooth has not started

I have used my u400 for 3 months without problem...
Then suddenly several problems with bluetooth occured...
When I wanted to use BT for example OBEX, I got error msg: "Bluetooth has not started".
I tried to reinstall driver for bt, but I couldn't. I got this error msg: "Please insert BT stack". So I decided to reinstall windows vista with recovery disk. On fresh install of vista, there were no bt drivers pre-installed. So I installed drivers and everything was fine for 2 days..
Now bluetooth is not working again.. can NOT reinstall drivers becouse of error msg again (Please insert BT stack) (Of course, the wifi switch is turned on).. The interesting thing is that in device manager is no BT hardware...
Any ideas?

Hi buddy
Ive got a U400 too and I never had any BT issues
I updated the BIOS to the latest state
Did you do this too?
If not you could try to update the BIOS
Furthermore I recommend enabling the BT using the FN+F8 key combination
Using this buttons you can enable and disable the Bluetooth and WLan
Check it!

Yosemite 10.10.1: Finder/CIFS mount problem: wrong folder count/folders not shown @samba shares

Hello to all,
we have several MacBook Pro (15" MBP Retina 2012/13"MBP Retina 2014) running. After upgrading to Yosemite 10.10.1 we had one nightmare after the other.
Most problems could be solved with 3rd party software upgrades but there are several problems with the operating system itselve which can not really be called a professional productive system at the moment...
Ok., one thing after the other...here is one of our biggest problems:
After upgrading from Mavericks or Mountain Lion to Yosemite 10.10.1 the CIFS/SMB mounts to our samba 3.x servers, running on Ubuntu Linux LTS 12.04 makes trouble. We could mount the server shares but after browsing with the Finder the beach ball occures and the Finder hangs forever. Sometimes we could not refresh the Finder, killing the process ended in a complete hang-up of the system which ended in a switch off death blow. This is not amusing because we have 30Tb of customer data there, which has to be worked out.
We heard about the SMB3 protocol which will be used per default in Yosemite and so we decided after some testings to upgrate our Ubuntu servers to the latest LSF 14.04. release with samba 4.1.6 installed. There was no message from Apple for this SMB protocol release upgrade, never heard something related to Yosemite (Why?).
Ok, after these server upgrades and disabling most of the Spotlight functions the performance to the CIFS shares was a little bit better as before but now we have another problem with the Finder...if you browse to the shares there are folders missing which have lots of files in it. For example there is a folder with 60 subfolders and 3562 files on the first level in it, the Finder shows 220 files and 15 folders. The Terminal shows a different count with "find . -maxdepth 1 -type d | wc -l" or "find . -maxdepth 1 -type f | wc -l" but there is also a difference to the original file and folder count. It doesn`t matter if the clients are connected via WiFi or Gigabit Ethernet. We have no access problems. We have the same behavior if we set the files and folders to 0777 permissions on the servers. The deletion of the preferences files of the users on the MacBooks does not solve the problem. If we use the "Go To Folder" option and type the path to a folder which is not shown in the Finder you get an result or not. But it is also possible that the result is not correct and there are also still files or subfolders missing.
In my opinion this is a timeout problem and a "special SMB3 protocol interpretation" which is buggy. We have one hint found in /var/log/system.log:
"Jan 23 14:35:49 wsosx33.clients.getcom.de KernelEventAgent[69]: tid 54485244 type 'smbfs', mounted on '/Volumes/customersdata2015', from '//x144067:@srvlxp013.servers.getcom.de/customersdata2015', not responding"
We had no problems with Mavericks at all, we still have no problems with Windows 7 Pro/Ultimate, Windows 2008R2 (native or virtual) or Linux Mint 17/17.1 clients, neither with samba 3.x nor with our actual environment and different newer samba releases.
We believe that this is a big bug in Yosemite, but we cannot go back to Mavericks because of incompatible TimeCapsule backups. Our workarround at the moment is that we have installed Linux Mint on our MacBooks to get 80% of our daily jobs done, rest has to be done with Windows 7 installed over virtualbox @Linux.
We have no clue at the moment how to solve this problem, the samba logs do not give any hint. The access from other operating systems is perfect and very fast, but not with Yosemite. We checked different tips found in the internet but nothing helped.
Does anybody has another idea to get Yosemite working or should we keep Linux Mint until Apple will provide a CIFS/SMB patch and going on with our workaround solution, which is productive at the moment ??? Our staff is not amused and wants one solution and not this workaround with two operating system. We have to decide wether we wait until Apple will get this fixed or we have to switch to Microsoft Windows (which is a No Go for me, but I will not be asked...).
Thanks in advance
C.

Hi William,
thank you for your response.
As you can read in my post I talked about CIFS/SMB.
It makes no difference if we mount the share over CIFS or SMB.
Folders with lots of files will not be shown even if we use SMB3 or an older protocol.
As mentioned I believe this is a timeout problem.
Does anybody know how the CIFS/SMB timeout setting in Yosemite could be changed?
Kind regards
C.

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks

Bluetooth does not work properly on Tecra M9

I have a problem trying to use my Bluetooth on Toshiba Tecra
M9 laptop.
When I go to Control Panel "Bluetooth Devices" does not show on the list. The only reference to Bluetooth is "Bluetooth Com".
If I double click on the Bluetooth icon in Systray I cannot open a Bluetooth device. I get a warning flag saying "Bluetooth is not Ready".
The problem is that I cannot turn "on" bluetooth on the laptop (even after turning on the Wi-Fi switch at the front of the laptop).
The "Bluetooth Devices" icon in Control panel is missing.
Any Ideas
Thanks in advance...

Install the latest Bluetooth stack and start "Bluetooth Settings" of the "Toshiba->Bluetooth" program folder.

Reporting tab is not shown in the console

hi everyone
the reporting tab is not shown in the service manager console, the topology i am using is 2 servers [one for DW and the other for management server] both servers have their SQL server installed on each one, could you please tell me how i can start to get
this working or the steps i have to follow ?? isn't supposed to be working out of the box ? i have checked reporting services and they are running

Probably your report server is not pointing to the DWDATAMART database, try login to:
http://YourDWDatabase/Reports/Pages/Folder.aspx?ItemPath=%2fSystemCenter%2fServiceManager&ViewMode=List
click on DWDATAMART Connection, under connection string, do you see your DWDATAMART DB name and server name?
Antoine AL Ibry

Text in PO(text tab in header & item) is not shown in the Print Preview

Hi Guys,
            I face a problem in ME23N.Text maintained in Purchase Orders (text tab in header & item) is not shown in the Print Preview.
            Can you guys help.Do I need to write a subroutine pool for this.
            <<text removed by moderator>>
Regards,
Rajiv
Edited by: Matt on Nov 12, 2008 1:20 PM

Hi ,
Use bapi bapi_po_getdetail .
CALL FUNCTION 'BAPI_PO_GETDETAIL'
    EXPORTING
      purchaseorder   = is_ekko-ebeln
      item_texts      = c_x
      header_texts    = c_x
    TABLES
      po_header_texts = it_header_text
      po_item_texts   = it_item_text.
Regards
Neetesh

HT3887 my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck

Bluetooth SPP not shown

Similar Messages

Maybe you are looking for