BO 3.1 and IIS

Hi
In last the version 3.1, all products works in IIS or there are some products (Dashboards) need Tomcat.
thanks and regards

You will need to perform a new installation if you want to add support for .NET (IIS).
from the release notes for 3.1:
Post deployment addition of .NET support
When a BusinessObjects Enterprise deployment has been created with
support for Java web application servers only, .NET web application support
cannot be added later. To deploy with both Java and .NET web application
server support, support for both must be installed during the initial installation.
Cheers,
Fritz

Similar Messages

Java SSO and IIS

This is a repeat of this post: Java SSO and IIS
Noone answered there.
Hello,
my organization uses Java SSO authentication in Oracle Application Server. Now we want to "expand" SSO so that our IIS applications can benefit from Oracle SSO and user needn't print user name / password again. Is there any way to use Java SSO in IIS? In this project we use Java SSO, not Oracle Identity Management.
Thanks in advance

Hi ,
I was installed and configured policy agent successfully.while i am trying to access the application url i am getting following error.
I am using IIS6.0 and access manager 7.1.
Error 2824:15b9918 AuthService: AuthService::processLoginStatus() Exception message=[Application user ID is not valid.] errorCode='107' templateName=login_failed_template.jsp.
2009-03-10 00:03:05.828 Error 2824:15b9918 PolicyEngine: am_policy_evaluate: InternalException in AuthService::processLoginStatus() with error message:Exception message=[Application user ID is not valid.] errorCode='107' templateName=login_failed_template.jsp and code:3
2009-03-10 00:03:05.828 Warning 2824:15b9918 PolicyAgent: am_web_is_access_allowed()(http://fcs-ylwkuzfoz1q.ramesh.com:99/website.html, GET) denying access: status = Access Manager authentication service failure
2009-03-10 00:03:05.828 Debug 2824:15b9918 PolicyAgent: am_web_is_access_allowed(): Successfully logged to remote server for GET action by user unknown user to resource http://fcs-ylwkuzfoz1q.ramesh.com:99/website.html.
2009-03-10 00:03:05.828 Info 2824:15b9918 PolicyAgent: am_web_is_access_allowed()(http://fcs-ylwkuzfoz1q.ramesh.com:99/website.html, GET) returning status: Access Manager authentication service failure.
2009-03-10 00:03:05.828 Debug 2824:15b9918 PolicyAgent: HttpExtensionProc(): status after am_web_is_access_allowed = Access Manager authentication service failure (3)
2009-03-10 00:03:05.828 Error 2824:15b9918 PolicyAgent: HttpExtensionProc(): status: Access Manager authentication service failure (3)
2009-03-10 00:03:05.828 Debug 2824:15b9918 PolicyAgent: OnSendResponse(): HTTP Status code is 500
can any one please help me to resolve this.
Thanks
Ramesh Kumar GV

Server crashes running CFMX7 and IIS

The sequence of events is that the server runs fine....for a
short while, then either CF services or all the Web services become
unavailalbe. Sometimes the whole machine goes down, and must be
rebooted. Sometimes if the machine does not go down, restarting CF
services or the Web services IIS solves the issue and the site
becomes available againl.
There are no server logs pointing to any hardware or Windows
operating system system problems. Running Windows 2003 Server and
IIS 6 with CFMX7.
Sometimes when the server goes down, I get a Jrun connection
error. But I really think that the server is just getting
overloaded with these erroneous 404 errors that are showing up
every couple of minutes/seconds in the application log.
These are 404 errors for pages that have been off the Website
for years, in some cases. It feels like a Web crawler is going
through the site looking for old erroneous pages and not finding
them.
I have built a completely new server, and now have twice the
hard-drive space and twice the RAM, but it is beginning to crash
just like the previous server. And the application log is filling
up, just like the prevous server.
We have re-assigned IP addresses, so this new server now has
the same IP address that the old one had, and even though it has a
new name, all references to the old name are being forwarded to the
new server....So our problem has followed us to the new machine.
Iiiiiiiieeeeeee. I am in the twlight zone, and can't get out.
Does anyone have any idea how I can tell where these 404 errors
might be coming from? How do I get a referrer on a log file error?
Or any other ideas at all. I am at my wits end, and if I
don't solve this problem am in serious trouble here. WCW

Willow315 wrote:
> The sequence of events is that the server runs
fine....for a short while, then
> either CF services or all the Web services become
unavailalbe. Sometimes the
> whole machine goes down, and must be rebooted.
Goes down? Do you mean 100% CPU and unresponsive or do you
mean it
completely locks up and doesn't even answer pings anymore?
> Sometimes when the server goes down, I get a Jrun
connection error. But I
> really think that the server is just getting overloaded
with these erroneous
> 404 errors that are showing up every couple of
minutes/seconds in the
> application log.
What is the first error you see in your *-out.log? Is JRun
maximizing
the allocated RAM when it goes down?
> Iiiiiiiieeeeeee. I am in the twlight zone, and can't get
out. Does anyone have
> any idea how I can tell where these 404 errors might be
coming from? How do I
> get a referrer on a log file error?
In your IIS logging settings, enable referrer logging. And
you might
check if there is a "Check that file exists" checkbox in IIS
where you
mapped the .cfm extension to CF.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

IE11 Problem with Windows 8.1 and IIS 8.5

I have upgraded my computer from Windows 8 to Windows 8.1, 64bit and IIS 8.5 is installed on the upgraded machine. I am unable to view with IE11 the default page of the default website hosted on the local machine. The problem occurs with both
the desktop version of IE11 and the Windows 8 metro style version.
When Chrome is installed on the machine the page is visible but when using IE11 a "This page can't be displayed" message appears. The IIS Log Files reveal that it is receiving nothing from IE11. Other machines I have that have also been upgraded
to Windows 8.1 exhibit the same fault.
The strange thing is that when viewing pages on other networked machines exhibiting the same problem, you can see the pages on the remote machines but in all instances the local page cannot be viewed.
It appears that there is a problem with IE11. Uninstalling and reinstalling IE11 does not fix the problem.
Can anyone help me? Assitance with this problem would be most appreciated.

Description
<dir>
</dir><dir></dir><dir></dir><dir>
Faulting Application Path: C:\Program Files (x86)\Internet Explorer\iexplore.exe
</dir>
Problem signature
<dir>
</dir><dir></dir><dir></dir><dir>
Problem Event Name: APPCRASH
Application Name: IEXPLORE.EXE
Application Version: 11.0.9600.16384
Application Timestamp: 52157231
Fault Module Name: MSHTML.dll
Fault Module Version: 11.0.9600.16432
Fault Module Timestamp: 52620354
Exception Code: c0000005
Exception Offset: 002964a7
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 2057
Additional Information 1: ab90
Additional Information 2: ab9026eb5cad8b25f882a373e2d752b2
Additional Information 3: d486
Additional Information 4: d48664e52db6f0b0676e13c96e422192
</dir>
Extra information about the problem
<dir>
</dir><dir></dir><dir></dir><dir>
Bucket ID: 45b7b98d077be82c89ec9142c2213a5f (-374769956)
</dir>

Crystal 8 Web Component Server ond Windows Server 2003 and IIS 6

I am trying to get Crystal 8 Web Component and Page Server to run on Windows 2003 Server with IIS 6. I have done the following:
Added the .cri and .rpt ISAPI extension mappings
Have Cache ISAPI extentions selected
Deselected "verify that file exists"
Aded the .cri and .rpt MIME types
Added wcsinsapi.dll as a IIS 6.0 extension
The above resolved all HTTP 40x.x errors but when trying to access a report from IE I receive the following error:
Error: Could not connect to the Web Component Server.
The page server and web component server services are running and I do see the listen ports (6401, 6403) active.
I know this is old software but it works quite well under a Windows 2000 Server and other web postings indicate that it is possible to run Crystal 8 under WS2003 and IIS 6.
Does any one know of a white paper/support document that details how to run Crystal 8 under Windows Server 2003 and IIS 6?
Has any one done this successfully?
Any tips as to cause of the "Could Not Connect" problem would be greatly appreciated.

Well as it turns out it looks like it was just this server.
We tried everything, and I added those user accounts to full
permission for the Coldfusion folders and we just could not get it
to work. We tried it on another couple servers running 2003, and it
installed perfectly right out of the box with no other permissions
needed. And those servers were all running default configs with no
other permissions done.
We still have no idea what was the problem, but at least for
now it seems to be this server. But I will tell you what, that II6
stuff seems to be a bit of a pain, we had major problems installing
new version of PHP with it too. Oh well, good luck to you
too!

Problems Installing ColdFusion 9 (64 bit) on Windows 7 and IIS 7.5

Problem: Empty response for static Files including images, CSS and js files. The response code is 200 OK, but there is no actual response (it's empty).
The ColdFusion Administration web site works correctly except it's not displaying any images, css and js. Why it is serving up dynamic content and not static is a mystery.
Installed ColdFusion 9 (64 bit) Multiserver Option on Windows 7 running IIS 7.5.
I have verified that IIS 7.5 is correctly configured for Static Content for both the handler mappings and the modules.
The Configuration for IIS 7.5 install looks like this:
The ColdFusion web configuration tools shows that it is connected to all instances of IIS.
I have uninstalled ColdFusion9 and IIS 7.5, and reinstalled many times but get the same problem: Empty responses for Static Files.
Help is appreciated.

To Clarify the blurry picture, this is what the IIS 7.5 install options look like:
Web Mgmt Tools > II6 Mgmt Compatility > IIS Metabase & II6 Compatability
WWW Services > Application Dev Features > .Net Extensibility and ASP.Net and CGI and ISAPI Extensions & ISAPI Filters
Common HTTP Features > Default Document and Directory Browsing and HTTP Errors and Static Content
Security > Request Filtering

NOT WORKING - Tomcat 4.0.5 and IIS 5

I'm trying to set up Tomcat to work with IIS 5 on windows 2000 server.
I got everything working fine locally. I deployed my app and it's working fine on localhost:8080. Now I want to be able to see it from the outside and some files that I try to view from my domain come up with the actual source code.
I ran with several tutorials that keep saying "Hey, you did it...it's was so easy wasn't it?" and they don't say anything when it all goes wrong. No one goes the extra step to help out when these easy instructions do nothing. I'm looking at this for far too long now and I'm losing my mind slowly.
I have IIS running and restarted it with jakarta virtual directory that has a green arrow up. But localhost doesn't find the pages. So I'm not sure what could be wrong.
I'm having a lot of trouble with the workers.properties file. If anyone could help me with that it would be great. The uriworkmap seems to be quite simple, and goes the same way as the web.xml server uri-mapping. But I'm not sure what could be wrong.
I also tried to get tomcat to service jsp files and IIS everything else, but still nothing.
Thanks in advance,
Lior

Well, something was wrong with my configurations of the registry amongst other things. Now I have everything in place and I played with the workers.prop file. However, it still doesn't work. I get the following in the isapi_redirect.log file:
[Tue Oct 15 12:11:00 2002] [jk_isapi_plugin.c (806)]: Using registry.
[Tue Oct 15 12:11:00 2002] [jk_isapi_plugin.c (808)]: Using log file C:\tomcat\logs\iis_redirect.log.
[Tue Oct 15 12:11:00 2002] [jk_isapi_plugin.c (809)]: Using log level 0.
[Tue Oct 15 12:11:00 2002] [jk_isapi_plugin.c (810)]: Using extension uri /jakarta/isapi_redirect.dll.
[Tue Oct 15 12:11:00 2002] [jk_isapi_plugin.c (811)]: Using worker file C:\tomcat\conf\workers.properties.
[Tue Oct 15 12:11:00 2002] [jk_isapi_plugin.c (812)]: Using worker mount file C:\tomcat\conf\uriworkermap.properties.
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (159)]: Into jk_uri_worker_map_t::uri_worker_map_alloc
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (199)]: Into jk_uri_worker_map_t::uri_worker_map_open
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (217)]: jk_uri_worker_map_t::uri_worker_map_open, rule map size is 5
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (262)]: Into jk_uri_worker_map_t::uri_worker_map_open, suffix rule /.jsp=ajp13 was added
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (262)]: Into jk_uri_worker_map_t::uri_worker_map_open, suffix rule /refcoapp/.jsp=ajp13 was added
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (262)]: Into jk_uri_worker_map_t::uri_worker_map_open, suffix rule /examples/.jsp=ajp13 was added
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (273)]: Into jk_uri_worker_map_t::uri_worker_map_open, match rule /examples/servlet/=ajp13 was added
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (302)]: Into jk_uri_worker_map_t::uri_worker_map_open, there are 4 rules
[Tue Oct 15 12:11:00 2002] [jk_uri_worker_map.c (324)]: jk_uri_worker_map_t::uri_worker_map_open, done
[Tue Oct 15 12:11:00 2002] [jk_worker.c (82)]: Into wc_open
[Tue Oct 15 12:11:00 2002] [jk_worker.c (207)]: Into build_worker_map, creating 1 workers
[Tue Oct 15 12:11:00 2002] [jk_worker.c (213)]: build_worker_map, creating worker ajp12
[Tue Oct 15 12:11:00 2002] [jk_worker.c (138)]: Into wc_create_worker
[Tue Oct 15 12:11:00 2002] [jk_worker.c (152)]: wc_create_worker, about to create instance ajp12 of ajp12
[Tue Oct 15 12:11:00 2002] [jk_ajp12_worker.c (264)]: Into ajp12_worker_factory
[Tue Oct 15 12:11:00 2002] [jk_worker.c (161)]: wc_create_worker, about to validate and init ajp12
[Tue Oct 15 12:11:00 2002] [jk_ajp12_worker.c (182)]: Into jk_worker_t::validate
[Tue Oct 15 12:11:00 2002] [jk_ajp12_worker.c (194)]: In jk_worker_t::validate for worker ajp12 contact is localhost:8007
[Tue Oct 15 12:11:00 2002] [jk_worker.c (177)]: wc_create_worker, done
[Tue Oct 15 12:11:00 2002] [jk_worker.c (223)]: build_worker_map, removing old ajp12 worker
[Tue Oct 15 12:11:00 2002] [jk_worker.c (235)]: build_worker_map, done
[Tue Oct 15 12:11:00 2002] [jk_worker.c (102)]: wc_open, done
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (555)]: HttpFilterProc started
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (600)]: In HttpFilterProc Virtual Host redirection of /localhost/examples/jsp/num/numguess.jsp
[Tue Oct 15 12:11:23 2002] [jk_uri_worker_map.c (351)]: Into jk_uri_worker_map_t::map_uri_to_worker
[Tue Oct 15 12:11:23 2002] [jk_uri_worker_map.c (368)]: Attempting to map URI '/localhost/examples/jsp/num/numguess.jsp'
[Tue Oct 15 12:11:23 2002] [jk_uri_worker_map.c (416)]: jk_uri_worker_map_t::map_uri_to_worker, Found a suffix match ajp13 -> *.jsp
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (617)]: HttpFilterProc [examples/jsp/num/numguess.jsp] is a servlet url - should redirect to ajp13
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (639)]: HttpFilterProc check if [examples/jsp/num/numguess.jsp] is points to the web-inf directory
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (679)]: HttpExtensionProc started
[Tue Oct 15 12:11:23 2002] [jk_worker.c (123)]: Into wc_get_worker_for_name ajp13
[Tue Oct 15 12:11:23 2002] [jk_worker.c (127)]: wc_get_worker_for_name, done did not found a worker
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (701)]: HttpExtensionProc could not get a worker for name ajp13
[Tue Oct 15 12:11:23 2002] [jk_isapi_plugin.c (722)]: HttpExtensionProc error, could not get a worker for name ajp13
I have no idea why it cannot get the worker. This is the prop file I have:
workers.tomcat_home=c:\tomcat
workers.java_home=c:\jdk1.3.1_04
ps=\
worker.list = ajp13
worker.ajp13.type = ajp13
worker.ajp13.host = localhost
worker.ajp13.port = 8009
Thanks.

SSL between WebLogic 10.0 and IIS 6.0 does'nt work

Hi,
I don't understand why the SSL connection between WL10.0 and IIS 6.0 doesn't work. My ini file is below:
WebLogicHost=10.0.162.31
WebLogicPort=7002
ConnectTimeoutSecs=20
ConnectRetrySecs=2
WlForwardPath=/weblogic
PathTrim=/weblogic
Debug=ON
SecureProxy=ON
TrustedCAFile=C:\trustedca.pem
EnforceBasicConstraints=off
RequireSSLHostMatch=false
where 'trustedca.pem' is the pem extracted (and converted) from wlsdemoca contained into DemoTrust.jks and '7002' is my ssl listen port.
I need to set any more parameter??
My wlpsoxy.log for one request is:
================New Request: [crl4/.wlforward] =================
Thu Apr 17 10:27:32 2008 <351612084388524> SSL is not being used
Thu Apr 17 10:27:32 2008 <351612084388524> resolveRequest: wlforward: /crl4/
Thu Apr 17 10:27:32 2008 <351612084388524> URI is /crl4/, len=6
Thu Apr 17 10:27:32 2008 <351612084388524> Request URI = [crl4/]
Thu Apr 17 10:27:32 2008 <351612084388524> attempt #0 out of a max of 10
Thu Apr 17 10:27:32 2008 <351612084388524> Trying a pooled connection for '10.0.162.31/7001/7001'
Thu Apr 17 10:27:32 2008 <351612084388524> getPooledConn: No more connections in the pool for Host[10.0.162.31] Port[7001] SecurePort[7001]
Thu Apr 17 10:27:32 2008 <351612084388524> general list: trying connect to '10.0.162.31'/7001/7001 at line 1239 for '/crl4/'
Thu Apr 17 10:27:32 2008 <351612084388524> INFO: New NON-SSL URL
Thu Apr 17 10:27:32 2008 <351612084388524> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Thu Apr 17 10:27:32 2008 <351612084388524> EINPROGRESS in connect() - selecting
Thu Apr 17 10:27:32 2008 <351612084388524> Local Port of the socket is 1476
Thu Apr 17 10:27:32 2008 <351612084388524> Remote Host 10.0.162.31 Remote Port 7001
Thu Apr 17 10:27:32 2008 <351612084388524> general list: created a new connection to '10.0.162.31'/7001 for '/crl4/', Local port: 1476
Thu Apr 17 10:27:32 2008 <351612084388524> WLS info in sendRequest: 10.0.162.31:7001 recycled? 0
Thu Apr 17 10:27:32 2008 <351612084388524> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 200 OK]
Thu Apr 17 10:27:32 2008 <351612084388524> URL::parseHeaders: StatusLine set to [200 OK]
Thu Apr 17 10:27:32 2008 <351612084388524> parsed all headers OK
Thu Apr 17 10:27:32 2008 <351612084388524> sendResponse() : uref->getStatus() = '200'
Thu Apr 17 10:27:32 2008 <351612084388524> Going to send headers to the client. Status :200 OK
Thu Apr 17 10:27:32 2008 <351612084388524> Content Length = 264
Thu Apr 17 10:27:32 2008 <351612084388524> canRecycle: conn=1 status=200 isKA=1 clen=264 isCTE=0
Thu Apr 17 10:27:32 2008 <351612084388524> closeConn: pooling for '10.0.162.31/7001'
Thu Apr 17 10:27:32 2008 <351612084388524> request [crl4/] processed successfully ..................
Thu Apr 17 10:27:57 2008 <351612084387971> timed out 1 connections, idle for (at least) 25 secs
Any idea that help me?

I had a look into the xlclient.cmd file and went to the JAVA directory which is being used. And did a search for the "cacerts" and found out that there is a file named cacerts in the JAVA_HOME/jre/lib/security folder over there.
But how does that relate to the problem of running the keytool command successfully at the right place (OIM_DC_HOME) ?
Any hints Kevin....
Thanks,
- oidm.

How to make OC4J and IIS on diffrent machines ?

Hi,
How to make OC4J and IIS running diffrent machines. following document tells use "standalone ONS daemon",Can anybody tell what standalone ONS daemon means and steps to be done to make IIS working on diffrent machine
http://download-west.oracle.com/docs/cd/B25221_03/web.1013/b25211/oc4jplugin.htm#i638738
Thanks & Regards
Vino joy

sender,
the quantize menu is in the top info box in the arrange.
if you double click on it, an extended parameter box appears with a lot of quantizing options. also RTFM about this bit.
in the sample editor, there is an audio quantize feature.
but it is old, and probably hasn't been updated in ten years........try it, you
'll prolly hate it.
there is also a quantize audio/groove plug, in the special menu.
it works....sorta.
if you're talkin' drums, on seperate tracks, like kik on one, and snr on the next, etc., try strip silence to cut the loop/file up, then select same in the arrange trk and quantize this, as above. (info box).
this does work well provided you know just where you want the feel to be.
you could also try making a groove template of the original clip/loop and use this as a timing reference.
this also works well if you can get a clean footprint of the audio.
best,
DR9

(Deployment) Minimum Software required for BUILD server and IIS WebServer

We have a simple .Net SDK application written using VB-2005 and the Crystal Reports XI (R2) DEVELOPER package.
The RPT files are posted on our BOE-XI (R2) server, and are called using the View-On-Demand method from the Page Server (similar to the SDK sample application). At some point in the future, our .Net applications may invoke some of the other SDK content types.
In our environment, the .NET web-applications are checked-in to Clear Case, and then sent to a stand-alone BUILD server to be compiled. The compiled .NET web-applications are then posted to a stand-alone IIS WebServer (not the IIS server that hosts BOE InfoView/CMC).
The BUILD server and IIS WebServer have to be as "stripped-down" as possible in order to go through our QAT and Impact Analysis process.
So far we have had success if we deploy the SDK-only install from the Crystal Reports XI (R2) DEVELOPER package, and the service packs, but it doesn't include all the SDK components for other BOE content types.
If we deploy the Client-only install from the BOE-XI (R2) package, and the service packs - it doesn't seem to include the CR-Viewer which we need. But it does includes a bunch of extra software (eg. UNIVERSE DESIGNER) on the desktop of the BUILD server and IIS WebServer that our QA guys don't like.
What are the Minimum Software required for BUILD server and IIS WebServer to support CR and BOE SDKs...?
Are there any install packages that contain JUST those components, and not all the extra software that is not needed to Build/Deploy in .NET...?
Thanks in advance for the advice.

Due to the CrystalDecisions.web.dll for the 2.0 framework being left off the BOE CD you will need to install the Crystal XI R2 runtimes as well as the BOE SDK.
To get the BOE SDK launch the Enterprise XI R2 installer and choose Server Install - not Client Install. Choose a Custom install. You'll be presented with a drop down list for the Enterprise components. Deselect everything and then look for the Developer Components option. You may have to drill down into one of the levels to find it. Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK. Select it to install it.
Jason

Unable to delete a SharePoint 2010 My Sites content Database and IIS Web Site even after changing timeout

Hi,
I am currently having issues with deleting a content database for mysites which has web application http://<servername>:11100. The database was migrated from sharepoint 2010, but on creating web app it timed out (was corrupt due to this). Problem
is I cannot delete now as I get "Request Timed Out". Even when I try just deleting the Web App or the Content Database individually. I have already updated the timeout on the Central Admin App Pool to 300. This used to work, but no joy now. Seems
like ever since I added this My Sites Web App I am getting this problem.
The setup is 1 Database Server (64GB), 1 Admin Server (24GB) and 3 WFE Servers (12GB each) - all VMS. System is also running PowerPivot. Central Admin is running on a WFE server. Is this setup OK for just one user? Reason I have 3 WFE is this already existed
and App Servers will be scaled out when we start testing. Running 11 Web Applications.
Help appreciated - any ideas?
Thanks.
John.
OH - I tried to delete with powershell and it tells me it requires SHarePoint Administration Service to be running, but the problem is it is already running on the WFE with Central Admin on.

Hi John,
The timeout may cause this issue. But would you let me know the error message when we delete the database?
However, you can delete the web application(my site host) and click delete database and IIS web site option.
Also, you can try to clean cache and check if issue persists:
Please stop SharePoint Timer Service.
Please navigate to the cache.ini file location:
Delete all the .xml file and only leave cache.ini in the file location.
Edit the Cache.ini file and set it to 1.
Save the Cache.ini file
  Start SharePoint Timer Service. The cache file will be created autumnally.
Any questions, please let me know.
Best Regards,
Dats Luo

Indexing .cfm files using Indexing Service on windows server 2008 and IIS 7.0

Hi All,
Anyone knows why .cfm files would not get indexed by Indexing Service on windows server 2008 and IIS 7.0. This is a coldfusion website using Indexing Service for site search. There are a lot of cfm pages indexed as unknown files. Any clues on how this can be fixed?
Thanks!

You might try editing your registry so that *.cfm, *.cfc, and other ColdFusion related files are treated as text files by the Windows search feature. See link below.
http://www.dougknox.com/xp/tips/xp_bad_search.htm
Disclaimer: I am not a Windows system admin. You might try posting this question to a Windows specific forum.

Weblogic 8.0 and IIS 5.0 plug in issue

hi,
I have a computer with Windows 2000 server and IIS 5.0 installed.
I am trying to open a connection with a Weblogic Server 8 SP3 on another machine.
My iisproxy.dll and iisproxy.ini
are on the folder: C:\WINNT\system32\inetsrv
iisproxy.ini :
WlForwardPath=/IhmActivation
Debug=ALL
WebLogicHost=toto
WebLogicPort=49162
WLLogFile=C:\iisproxy3.log
I have configured iisproxy.dll in IIS 5.0
Based on what I entered in my configuration file iisproxy.ini, if I type the URL:
http://localhost/IhmActivation/here.do
it should point to
http://toto:49162/IhmActivation/here.do
I get a 401 message:
Going to send headers to the client. Status :401 Unauthorized xxx
The login and password are ok.
So I do not know where the problem comes from.
Does anyone have an idea please ?
Thanks for your help.

Since you are attempting to proxy by path you need to configure the iisforward.dll as stated in step #3 here:
http://e-docs.bea.com/wls/docs81/plugins/isapi.html#100382

Secure Communication between Weblogic 5.1 and IIS

I have WL5.1 and IIS running on two separate machines. I've installed
SSL certificates on IIS. So the traffic between the browser and IIS is
encrypted.
When the "iisforward" filter is used to forward servlet execute to
Weblogic I get a message on the browser which says "You're about to be
redirected to a connection which is not secure. The information you're
sending to the current site might be retransmitted to a non-secure site. Do
you wish to continue?"
This makes sense as IIS does not know where the filter is forwarding this
data. But how do I get rid of that message? There does not seem to be a way
in 5.1 for the plugin/filter on IIS to communicate securely over SSL to the
Weblogic server.
Thanks,
- Ayush

Can you give more details on how you configured credentials on jboss end.
post this on jboss forumn as the solution lies in jboss configuration not that of wls.

Web Enterprise and IIS 3.0

We are currently experiencing a problem with Web Enterprise and IIS 3.0.
When a request is entered through a web site to our Web Enterprise back end,
using either fortecgi.exe or forteisapi.dll, the first request comes almost
straight through to the back end - this is seen by looking at the log file.
However, subsequent requests from the same browser session (IE or NS) take
consistently about 45 seconds to come through to the back end. If a new
browser session is started up, on the same PC, whilst waiting for the other
one to come through, a new request will once again go straight through
before the one that is waiting does.
This only happens on two external web servers - the internal ones don't do
it. I have compared setups of IIS on the internal and external web servers
without discovering what the cause could be. Monitoring the external web
server shows that for the initial request from a new browser session,
fortecgi.exe starts up and shuts down very quickly, but for subsequent
requests hangs around until the log file at the back end shows it has
received the request.
Any help would be greatly appreciated.
Steve Isaac
Senior Consultant
Xpedior
Tel: +61 8 9320 7620
Fax: +61 8 9486 8650
Eml: Steve.IsaacXpedior.com
Web: http://www.xpedior.com

Hello Frank,
look out, it's likely that you are using a default JNDI name, so the name of the ear it's part of the JNDI name.
If the application is deployed in a EAR file, the default JNDI name is the EAR-FILE-BASE-NAME/EJB-CLASS-NAME/local for the stub for local interface. For the remote interface (see below), it is EAR-FILE-BASE-NAME/EJB-CLASS-NAME/remote.
If the bean is deployed in a JAR file, the JNDI names are EJB-CLASS-NAME/local and EJB-CLASS-NAME/remote.
Regards
Mark
[Master the Boss - a Jboss magazine|http://www.mastertheboss.com]
Edited by: mark1970_mtb on Sep 2, 2008 3:26 AM

ORACLE 11G AND IIS 7.0

Hello ....
I have an application server with Windows Server 2008, IIS 7 and Oracle Data Provider 11G.
The website was set up. NET 2008 has made reference to the oracle, and to run from the application
working properly executes the SQL without problem, but to make the creation of a website
The IIS 7, and test its functionality, displays the following error
Could not load file or assembly 'Oracle.Web, Version = 2.111.6.20' or one of its dependencies.
The system can not find the file specified.
The problem may be a compatibility between the version of Oracle 11G and IIS 7.0, I do not know if there is an
additional component to the IIS 7.0 can recognize the version of Oracle as a provider of data?
Please I am attentive to their solutions .... Thank you

One thing might be if the web server has multiple versions of Oracle installed, then check to see which is first in the path. Another would be that at the least IIS would need to be restarted after the Oracle install, for the path to take effect, possibly the whole machine would need a re-boot for this.

BO 3.1 and IIS

Similar Messages

Maybe you are looking for