BO 4.0 conditional formatting email alert?

If so, how can I create a report where a cell is conditionally formatted = >5, between 0;5, <0 so if the value is <0, it would send an email alert txt to X individuals?

i did open a SAP OSS. I will update you

Similar Messages

Href target in ling format emailed alert

HI,
Our emailed alerts from EM are working well however in the long format email, the hyper links are using the wrong port number therefore the hyper link in broken, in this case the default 1529.
href="https://blah.internal.bigg.bug.ap.uk:1159/em/redirect?encoded=FALSE&targetType=oracle_database&pageType=TARGET_HOMEPAGE&targetName=BLAH"><b>BLAH</b></a><br>
Does anyone know how to change the port used in the generation of the email.
Thanks

Thanks Robert,
I have checked the file out $OMS_HOME/sysman/config/emd.properties
and there is no reference to the port 1159. The only files that contain an 1159 reference are emoms.properties and httpd_em.conf
$AGENT_HOME/bin/emctl secure status agent
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /oracle/product/agent10g/sysman/config/emd.properties... Done.
Agent is unsecure at HTTP Port ****.
Checking the security status of the OMS at http://blah.internal.blah.blah.blah.uk:4889/em/upload/... Done.
OMS is secure on HTTPS Port 1159
Thanks

Outlook Conditional Formatting by sender's email address?

Is it possible to set Conditional Formatting based on the sender's email address (rather than the name displayed in the From field)?
We're using Outlook 2010 in cached mode with an Exchange server.
Thanks!

Hi,
Currently it's by design. If we change the display name by VBA, we may set the condition based on the Sender's email address:
http://www.slipstick.com/outlook/contacts/bulk-change-outlook-contacts-email-display-name-format/
You can also refer to the thread you noticed earlier, our moderator also posted an answer to the original question:
http://social.technet.microsoft.com/Forums/office/en-US/0257072a-2068-40bb-94ae-d12c992d4ea1/conditional-format-problem-in-outlook-2010-to-from-fields?forum=outlook#d85fda41-9f3e-47b3-af30-37099bd8119f
Regards,
Melon Chen
TechNet Community Support

XStep conditional formatting. Can it be determined at run time ?

Does anyone know of a way to put conditional formatting into an XStep generated table output. For example, this is what we are trying to do:
- At some point after an order is generated and released, materials are issued to it.
- We have created a function module that reports back the list of all materials issued.
- The FM also checks to see if the material was planned in a reservation.
- If a material issued was not a planned material we want to list it in RED.
In the XStep repository, I can simulate a table output using parameter PPPI_FRAGMENT_HTML, and can change font color by giving it a value like
<div style="color: red">TEST123</div>
And I get TEST123 displayed in RED.
I also get TEST123 displayed in red on the generated PI sheet, if I put the put the HTML string above into the XStep as a fixed value.
But if I program the FM to return this string, then I get the entire string output in the table field and the font color is not changed to RED.
Edited by: Mike Rupp on Oct 14, 2011 6:31 PM
Edited by: Mike Rupp on Oct 14, 2011 6:36 PM

I got a response at the XStep Cafe and thought it might help others if I share it here.
Arne Manthey:
I assume that you are also using PPPI_FRAGMENT_HTML for the parameter to which the FM returns your string. If you valuate this parameter manually it is internally handled as a long text. However the function module will most likely return just a string value and these are probably not recognized as a long text. I do not have any idea how to valuate a long text with a FM when the PI Sheet has already been generated. The only thing I did successfully was to generate HTML text during generation (although not with XSteps). But in your case this would not help, yes?
The general problem with long text elements is that they are really meant for initial valuation only and not for changing back and forth.
Another way of doing conditional formatting would be to use some Stylesheet magic which evaluates a status parameter you would set by a function module. This would most likely also include some Javascript to make the change happen. Please follow that path only if it is really necessary because Stylesheet stuff is not easy to handle.
mrupp:
Thanks Arne.
We decided to just add an additional table column with an alert message when needed to flag Unplanned Materials and/or Expired Shelf Life. I have played around with Stylesheets & Javascript a bit and agree that it is not worth it in this case.

Excel 2013 Conditional Formatting problem

Hello!
A customer of mine has recently transitioned from Office 2007 to Office 365. This has been a major hurdle for them, and they're still experiencing some issues with things not behaving the way they used to. I'm not an Excel expert, so I have no idea if the
following issue is some sort of bug or compatibility issue, or if the user is just expecting behavior that isn't going to occur in this version of Excel.
She has a spreadsheet that she uses to schedule people. She uses conditional formatting to change the color of numbers based on their size. For example, everything less than 2 is red, everything between 2 and 4 is green, etc.
So, let's say she has two rows that have been formatted already. Then she adds a third row, inputs the data, then highlights the entire row and tries to format it. Once she adds her rules and clicks "Ok", that row is formatted...but rows 1 and
2 have now been cleared of all formatting. So basically, she can't format things on the go, as she puts them in, she has to format everything at the same time, every time.
It doesn't happen to every row that has already been formatted. If she has 20 rows that are formatted, sometimes only 2 of them will lose their formatting after she applies her rules to a new row. It's usually the rows that are right next to the new row.
I have very little experience with Excel conditional formatting, so I don't know what would cause this, or if there's a fix or workaround. Also, I'm not sure if I'm explaining it clearly. Any help or suggestions would be welcome!

Hi,
According to your description, this issue seems occur with the special spreadsheet. In my view, it might be more related to the file itself, such as incorrect range with conditional formatting rule, double rule with same cell range or other.
would you like to send the sample file to me ([email protected]) if possible? I want to test it.
Regards,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Conditional Format Icon Sets not Displaying after SharePoint Update

We have a SharePoint 2013 site, and after we applied the update below, the conditional formatting for our primary dashboard no longer appears in Excel Services. We have three different versions of the file and all have been
affected. I have tried removing all of the conditional formatting, and re-applying it, but it does not work.
If the files are opened in Excel, they look perfect. A blank, new file with the same conditional formatting rules work fine.
Any thoughts on how to correct the issue??
SharePoint 2013 CU October.
http://blogs.technet.com/b/stefan_gossner/archive/2013/10/09/october-2013-cu-for-sharepoint-2010-has-been-released.aspx
Thanks, Barbara

Hi Barbara,
According to your description, my understanding is that the icon sets cannot be displayed in Excel files after installing SharePoint 2013 October CU.
The link to download the SharePoint 2013 October CU is not correct, it is October CU for SharePoint 2010.
I recommend to check the build number of your database to see if the right October CU for SharePoint 2013 is installed.
Here is the link of October CU for SharePoint 2013:
http://blogs.technet.com/b/stefan_gossner/archive/2013/10/26/october-2013-cu-for-sharepoint-2013-has-been-released.aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Supress Email alerts

Hi there,
I've been asked to develop an email alert for the Payroll team.
Basically its to send out an email alert to the team when any employee has used up more then 20 days of sick leave within a calendar year for payroll deductions.
I've managed to build a query that checks the relevant tables that store the information, however how do i suppress duplicates?
For example, if an employee uses 21 days of sick leave on Tuesday, the alert is set to trigger on a daily basis and an email gets sent out to payroll.
However, the same email gets sent out on Wednesday because the conditions are still true. The employee has used up >20 days.
On thursday the same thing.
If i change it to only trigger when the 'leave' table gets updated, it would still trigger duplicates as whenever any update is done to the table, the conditions are true again and an email gets sent out.
Any advise?
Thanks

Additionally, I found this in some Oracle Docs
To create a self-referencing alert:
You create a self-referencing alert the same way you would create any other alert, but
you tailor your alert Select statement by adding to the Where clause a comparison
between the values in the implicit input :DATE_LAST_CHECKED and the column that
contains the date and time information that you want your alert to reference.
Example
Suppose your Select statement contains the following lines:
WHERE ...
AND creation_date > TO_DATE(:DATE_LAST_CHECKED,
'DD-MON-YYYY HH24:MI:SS')
In this example, Oracle Alert compares the date and time information in the column
CREATION_DATE with the date and time information in :DATE_LAST_CHECKED to
determine which exceptions are new.
However, my alert cannot be 'verified' or 'run' when I use the above statement, even after changing to
WHERE TO_DATE(SYSDATE, 'DD-MON-YYYY HH24:MI:SS') > TO_DATE(:DATE_LAST_CHECKED,'DD-MON-YYYY HH24:MI:SS')

Conditional formatting in Webi report

Hi,
I have a requirement wherein I need to conditionally format column to make the coulmn value "red colored" as per a certain condition and also need to display a small image next to the column value. Does anybody have an idea to achieve this?
Thank you,
boe user1

Hi,
You can use Alerters for the conditional formatting.
Click on the Alerter icon from the tool bar.
New-> define condition -> click ok for default formatting else click on format.
You can define any formatting to the column values you want e.g you can change the font color or you can change the back-ground too.
To display a image you can add one more column and insert it as a background image. If this is also conditional then again insert it using alerter or you can write if else formula with image url.
Regards,
Rohit

Can I use conditional formatting in OWA?

Can I use conditional forwarding for emails in OWA. I would like to set up rules in OWA that will allow certain messages to change their display upon receipt.

Hi,
Based on my knowledge, I'm afraid that we can't do it via OWA. You need to setup the conditional formatting on Outlook. Here is the steps for your reference.
On the View tab, in the Current View group, click View Settings, and then click Conditional Formatting. Click Add to create a conditional formatting rule.
For more information, here is a blog for your reference.
Conditional Formatting: Highlight your most important mails
http://blogs.office.com/2012/05/10/conditional-formatting-highlight-your-most-important-mails/
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Comparing lookup columns in conditional formatting

I have a column of type number in one table, and in that same table a lookup column of type number. Do I have to do any special formatting or manipulation to be sure they properly compare so I can do conditional formatting?
First part of clause is in the main table; second part is the lookup
This is the clause in question clause:
$thisNode/@Due_x0020_Cycles <= @Registration_x003a_Cycles_x0020_
(This of course, doesn't work as I expect it to)

This might be because the Lookup is actually returning the index value rather than the actual value that displays. You may have to take the Index value from the lookup and use that to get the value from the original list.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

Email alert only occurs when I open email

My first iphone. User-friendly, my a**! You call being forced to login 4 times with a password that is required to have a minimum of 489 characters (155 of which must be CAPS), 85 lower case, 141 numbers and 108 special characters??? I clicked at least 30 OK boxes to get to this forum and I'm too ****** to worry about the stupidity that my email alert only occurs when I open the damned email. Gee, thanks iphone, I'd never know I was opening the email I was opening if you didn't ring that bell!
What I'd really like is notification that an email has arrived without having to log into my phone and open the program!

Thank you for responding.
Unfortunately, I am currently going through Gmail.
As for exaggerating, both my iphone and my desktop require multiple logins after asking questions. 4 logins for my desktop to get to this page. Fine, it's not a minimum of 489 characters. I believe in complicated passwords, but not being forced to use one in specific format and then being asked 4 times in a row for full log in. Excuse the **** out of me if that happens to make me angry. It amazes me how the people who believe in Darwinian evolution are always fighting against the concept of "survival of the fittest."
I had also just done the same thing on my iphone, which was worse because of the limitations of the touch screen.

Cancelling an email alert

I am receiving an email reminder alert from iCal that I would like to stop, but it's not in my calendar! How can I stop it?

"V Prakash" <[email protected]> wrote:
>
Hi
Can anyone tell me, whether its possible to create an email alert based
on some
server events. For example, say I would like to receive an email if the
Idle thread
count is less than 10. Or memory usage is > something.
I would like to setup alerts for my application which is running 24x7.
I could
achieve something of them using the third party tools like Introscope.
I appreciate your help
Thanks
V Prakash
[I am sorry if I posted this item in multiple newsgroups. I am not sure
where
exactly this fits. Thanks]Sure you can do it. setup a script which uses the weblogic.Admin utility to check
for various things like server status etc, pipe the output to a file, read the
file and set a condition to email you when the condition is not met, you can set
it up as a cron job.
example --
java weblogic.Admin -url t3://servername:port -username yoursystemusername -password
somepassword GET -mbean menloview413:Location="servername",Name=default,ServerRunti
me="servername",Type=ExecuteQueueRuntime -property ExecuteThreadCurrentIdleCount
outfile.txtThen grep outfile.txt for ExecuteThreadCurrentIdleCount and use the if -- then
-- else loop.
Anil

How to configure email alerts on SBS 2011

It was kind of annoying, but SBS 2003 could send email alerts for all kinds of conditions. The alert function is no longer there in SBS 2011. Is there any way to configure these alerts - like when the server restarts - or the Exchange Store has
shut down, etc.
Thanks!

Dear Mike,
I am 12 months on from replacing SBS 2003 with SBS 2011 at one site, SBS 2012 at another and SBS 2008 at a third. Its just me and around 250 users in about 7 countries and 3 continents - such is the charity sector. I have not had the time to
research automatic alerts up till now and missed a failing backup as a result. Your article is very helpful. I hadn't put my email address in the box that you indicated. Its been a great puzzle to me that the level of reporting was so abysmal
after the change to the later generation of SBS, but the pressure of work never allowed time to check. False economy I would say, now, but thanks for this very clear and helpful item.

HTML Formated Email From Oracle Database

Hello,
I am generating email alerts from oracle 11g,10g using utl_mail.send.
I want to genrate/send email in HTML formated.
How i can send HTML formated email form Oracle Database (11g,10g)
Thanks In Advance

hi,
inside oracle apex 10g. i am using this.
please try
begin
HTMLDB_MAIL.SEND(
P_TO => '[email protected]',
P_FROM => '[email protected]',
P_BODY => 'test',
P_BODY_HTML => '<table><tr><td>data</td></tr></table>' || SYSDATE,
P_SUBJ => 'Test Email working '
wwv_flow_mail.push_queue(
P_SMTP_HOSTNAME => 'localhost',
P_SMTP_PORTNO => '25'
end;
Thanks
LOGA
www.go-websoft.com
Apex Consulting & Development

Scheduling email alert from dashboard

Hi All
Is there any way to schedule an email alert from dashboard based on some condition?
For example if the total no of transactions falls below a certain limit, an email is supposed to be sent to a user.
Thanks in advance
Sandeep

Hi Sandeep,
Unfortunately, the scheduling feature for dashboards is currently not available but is definitely considered for future releases.
There are already few requests made on Ideas place:
https://ideas.sap.com/ct/ct_a_view_idea.bix?c=E827808B-89E8-45A5-BBA9-9A3F6F1DA703&idea_id=B55B2348-DC61-413D-B91C-3B639FA9CBD6
https://ideas.sap.com/ct/ct_a_view_idea.bix?c=E827808B-89E8-45A5-BBA9-9A3F6F1DA703&idea_id=F775A25C-9B44-4985-A80A-A7E3B828123E
https://ideas.sap.com/ct/ct_a_view_idea.bix?c=BB5523E4-062F-4420-B35F-0B1F0D4769A9&idea_id=831B8C30-860F-4680-9FA5-F21734F8D08B
I would highly recommend you submit your votes so this request gets prioritise.
Regards,
Jennifer

BO 4.0 conditional formatting email alert?

Similar Messages

Maybe you are looking for