Board giving error codes for RAM

I have a Z87-GD65 GAMING board. I am having an issue with running the RAM in DUAL channel. It will running OK with each stick individually installed, but not together. Error codes I'm getting are a 10, followed by 19, and then 55. With just one stick, code is A0. My RAM is Corsair Vengeance Pro Series Red 8GB (2x4GB) DDR3 1600 MHZ (PC3 12800) Desktop Memory CMY8GX3M2A1600C9R.
This is on the very first boot after everything was installed. no BIOS changes were made.
Any help would be appreciated.

Quote
I didn't have a chance to look at socket. But, I did notice that the 1st two dimm slots don't work, but 3 and 4 do.
Classic bent CPU socket pin(s) scenario.
Quote
I hear that the LGA 1150 socket pins aren't really easy to bend. I placed the CPU in and clammed down. There wasn't really anything I could have done to mess it up. I'm pretty positive of that.
Unfortunately, not true at all. They are very fragile. A CPU cooler mounted uneven or that has incorrect torque will also cause this behavior.

Similar Messages

Vodafone India customer....on my iPhone5, imessage and facetime are giving error "waiting for activation"

Hi
I have iPhone 5 with Vodafone India connection. The major challenge is Facetimche & iMessage giving error "waiting for activation"
I have tried all the available solutions in Google search but still no change.....
Please help in getting this sorted out!!!
Thanks
Atin

Level 1 (0 points)
chakkochi
Re: My iMessage still says "Waiting for activation..." Jun 17, 2012 10:04 PM (in response to bradfromwinnipeg)
Hi All,
This problem is solved for me, with some help from the carriers. At last
Let me describe my situation once again.
I am from India, where the official iPhone carriers are Airtel and Aircel.
I have two prepaid connections - One from Airtel and one from Reliance GSM
Whenever I try to activate iMessage from my Reliace SIM, it shows activation unsuccessful, the the receive at shows my email ID only.
But whenever I try activate it using Airtel SIM, it activates just fine. But since my primary connection is the Reliance one, I wanted it to get activated for Reliance.
I have tried every tweaks/restore etc mentioned in this discussion, but nothing worked.
The solution:
This does not require any jailbreak/restore. Just a little help from the carrier.
For all reliance GSM customers in India, you can just try to activate in again. I think they have solved it for all customers.
I was almost lost hope of activating imeesage on Reliance. But then one of my friends bought a new iphone (4S). He had a docomo connection, and he also had this same issue. But using his contacts in docomo, he enabled some trace in his connection, and found out that the phone was trying to send SMS to a UK number (short code), which is blocked by their RA team.
This is that magic number : 00445773142076
So from him, I got the number. I raised a complaint with Reliance.
The complaint had nothing about imessage, but it said: "I am unable to send international SMS to the number 00445773142076, even after having sufficient balance and an active SMS plan"
So they have done some 'unblocking' and called me this morning and asked to try again 'sending sms to the same number' . I went to settings and activated imessage and facetime/ Thats it !!!!.
A big thanks to Reliance GSM support for the quick solution.
For anyone on Reliance GSM in India, just try activating it now.
For others, log a complaint with the carrier that "you want to send SMS to the number 00445773142076.
Thanks all

Ora (OCI) error codes for TAF failure

Hi,
I am working on project where in I have to support Transparent Application Failover (TAF) in GUI (using Java). From web (by googling) I found that this is automatically done by JDBC Thick (OCI) drivers.
I also found in some web site that there are lot of Ora Error Codes for various senarios like SELECT TAF failure(Ora 25401), or for DML command TAF failure(Ora 25402).
Is there any set/range of Ora(OCI) Error Code which is specifically for all TAF failure senario?
Thanks
Ram

:-)

Same error code for two different errors

I have a simple state machine with a few states, two of which are read ini file and read GPIB data. I also have an error handling state where I would like to handle all errors. Errors are checked for on each iteration of the loop, passed by shift register. However, I can't just unbundle the error cluster and wire the error code to a case structure because if the ini file doesn't exist (error code 7) I want to exit the program. But if I get error 7 from the gpib (Nonexistent GPIB interface) I want the program to continue running. What is the best way to track where the error is coming from so I know how to handle it when two error codes for different errors have the same error code value?
Message Edited by for(imstuck) on 01-27-2010 03:47 PM
CLA, LabVIEW Versions 2010-2013

Another option is to check the existence of the file before opening the config file, then exit the program if nessecary. Relying on error codes might be a bad option.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Where to find LED error codes for Portege 4010?

Hi,
My Portege 4010 isn't working, and the AC indicator is blinking an error code (either 0xA or 0x50 depending if I should interpret the first bit as least or most significant). I've tried searching, and I've found a fairly detailed guide that includes these error codes for the Portege M100 and M300 (at http://tim.id.au/laptops/toshiba/portege%20m100.pdf and http://tim.id.au/laptops/toshiba/portege%20m300.pdf) but I can't find anything for the 4010. So can anyone give me a location (ideally official Toshiba) for a document detailing the meaning of the error codes for my model?
Thanks,
Jes

See for 'REP messages' in help menu.

HT1414 my iphone is frozen and when i am trying to restore the same it is giving error code 21 again and again

Please help my iphone is frozen and showing only apple sign, after following few tips for web it reached to itunes sign but every time i am trying to restore my iphone it is giving me an error code 21 ???

If your phone is frozen showing the Apple logo, you need to try to force it into recovery mode to restore it as discussed here:http://support.apple.com/kb/ht1808. If you're getting error 21, try disabling or troubleshooting your security software (anti-virus, etc.). This is Apple's discussion on error 21 (copied from http://support.apple.com/kb/TS3694#error21):
Error 20, 21, 23, 26, 28, 29, 34, 37
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

Error Codes for ibook G4

A friend asked me to replace the hard drive in their iBook G4. (800 MHz). The hard drive was toasted and wasn't accessible in target mode. I've got a new 40 GB drive installed.
When I boot the computer, it beeps 3 times. The power on LED flashes 3 times, then stays on for 10 seconds and loops. What does this error code mean? Is there a list of the codes some where?
Thanks
Chris Peterson

Getting three beeps at startup suggests that there's a problem with the RAM. Try removing and reinserting the RAM modules installed in the machine. More information about the codes is available here.
(9357)

Error code and RAM

Hi!
I´m new here, and I´m not sure if I´m in the right forum. I have a G3 iBook, 800 MHz, OS 10.3.9. I purchased extra RAM for it about 6 months ago. I just got a whole bunch of new programs (Adobe CS2), and only trying to install them caused problems. I had other problems before, too. Programs quit unexpected, discs wouldn´t mount... So I backed up all my files and tried to reinstall the system. The computer crashed completely and wouldn´t let me log in. So I took it in for repair and was told that my harddrive broke. Got it replaced, took it home, tried to install my programs...still the same problems. Some don´t install at all, others don´t open or I can´t save anything without crashing the program. So I ran the Apple Hardware Test, which came up with the following error code: mem_/2/3DIMM1/J12. That sounds to me like the RAM that I got about 6 months ago doesn´t work. So I took it in again this morning. They tested the RAM and said it is OK.
So what does that mean? The hardware test shows there is a problem, but the RAM is ok? Could the slot be broken? What exactly does the error code mean?
The guys in the store weren´t very helpful and I just spend $400 on a new harddrive. Anybody any idea what´s wrong with my computer?
Help please! :o)
I´m desperate! I really really need a computer right now!
Thanks!
iBook G3 800MHz Mac OS X (10.3.9) 128 MB built-in, 512MB SDRAM

Hi, and welcome to Apple Discussions.
Yes, you've found the right forum.
Could the slot be broken?
This is a good possibility. Try removing the extra RAM and running with just the 128 MB. It will run pretty slowly that way, but, hopefully, will not crash if it's your RAM or RAM slot gone bad.
To check out the RAM, did you take it to the same shop that replaced your hard drive? If so, has it occurred to you that they may have said the RAM was okay because they don't want to admit they replaced your hard drive needlessly? I would get a second opinion on whether or not the RAM is defective.

HT201272 I purchased Season 3 of the Walking Dead. I cannot download the second episode of the season; corrupted file. I submitted a feedback form, but they do not send a reply. I tried to use the online help/support, got an error code for that page.

I just want my content. I am frustrated at trying to get on-line help. Either I will not get a reply to my feedback form, or the online support page has an error code, with "please try again later" or "start over". I have paid for this content, and cannot download their corrupted file.

Are you in a country where TV shows can be re-downloaded - if you are then have you tried deleting that copy from your iTunes library and re-downloading it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes ?
When you say that you used the feedback page, do you mean the feedback page (which you won't get a reply to) or the 'report a problem' link from your purchase history on your account or the contact iTunes Support page ?
'report a problem' : log into your account on your computer's iTunes via the Store > View Account menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
contact iTunes Support : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption (if this page doesn't work then have you tried clearing your browsers history/cache and/or tried a different browser ?)

Possibility of giving match code for Manufacturer in Equipment Master

Hi -
We can have a field exit on fieler HERST of Equipment Master.
Is there any possibility of giving a match code on this filed? so that we can maintain a table for manufacturer and user can select any one entry from this table.
We do have activated filed exit for manufacturer check, but need to further restrict the entry so that there is uniformity of entry maintained in this field.
Kindly advice.

hi narendar,
some information :
In addition to the above mentioned exit we have also created a custom match code for this field in one of our project ... the exit gets triggerred whenver user hits enter and the value entered here is used in selection criteria that displays the custom popup window ... the data is picked from vendor master table the selection createria we used was vendor name and description and vendor acount group MNFR - for manufacturers would be defaulted and displayed.So you can go with creating a custom match code which is invoked whenever user selects F4...
regards
pushpa

Digital I/O board 9478 error code 65548 overcurrent report by channel

Hi All,
We are investigating overcurrent on digital outputs. This project is using the Scan Engine instead of FPGA.
Reading one of the hardware shared variables gives the error code 65548 - One or more channels are in overcurrent or overvoltage protection mode.
If we used FPGA would we be able to determine which channel is in overcurrent?
Thanks,
Paul

Hello Paul,
Yes, it can. You can use Module I/O Method and it will indicate if the module runs into overcurrent or not. The previous like is for the 9269, but it also works for the 9478. Remember that if you are using LabVIEW 2012, you won’t be able to create a method by right clicking on the I/O variable because of a known bug. A workaround for this is to open the example “NI 9269 Status Methods.lvproj” and add your target. Then you can right click on the method » Select Item » select your module.
Regards,
Daniel REDS
RF Systems Engineer
Help us grow.
If a post solves your question, mark it as The Solution.
If a post helps, give Kudos to it.

KM776 error code for material

Hi Expert,
I got a error message as represantative material error KM776 when doing MIGO for serving material type.I need a solution for this your help would be appreciated.
Kind Regards

Or even better what is the preferred way to keep a connection
persistant. If a connection is dropped, say the first copy of the
db goes down, and you want to catch an SQLException and then
try to reconnect through OCM to another available instance. What
is the preferred way of doing this? I have'nt found that an
exception is thrown if the connection is lost, so I am puzzled
as to how people are verifying that they have valid connections
in their self implemented connection pools. I don't want to have
to check connection.isClosed before every transaction assuming
that even works.
I am guessing that jdbc 2.0 will provide some of this
functionality with the connection event api, but I am only
guessing at this point.
Someone please shed some light on this for us.
Thanks,
SKroah
Jayashree (guest) wrote:
: What is the error code/Exception which is thrown if I try to
use
: a JDBC connection object and the network link between the
driver
: and the Oracle db is broken?
: I did not find anything in the Oracle driver documentation.
: There is a "getErrorCodes" API part of the JDBC connection
: specification and would like to see what Oracle driver returns
: for the scenario explained above.
null

Add-OdbcDsn giving error code 11

This "should" be simple, yet, here I am. So, I'm just trying to add a 32-bit System DSN, using Add-OdbcDsn as follows:
Add-OdbcDsn'mydb'-DriverName'Pervasive
ODBC Engine Interface'-DsnTypeSystem-Platform32-bit
One would think, nice, and done...but not so. Getting:
Add-OdbcDsn : Driver's ConfigDSN, ConfigDriver, or ConfigTranslator failed (Installer error code: 11).
The driver name is valid. If I do a Get-OdbcDsn - DriverName of the same (copied and pasted to be sure), I get other DSNs that already exist. I am running Powershell ISE as Administrator when I do this. I've searched for this error, and found things such
as already mentioned (invalid driver file or not running as admin), but I can't find anything else.
What am I missing now? :)
Thanks in advance!
mpleaf

I was able to figure this out. There were parameters that the driver was requiring, that I was missing in my dsn. I was looking at vb code that was created for an older version. I had to monkey with it long enough to figure out the property values. I created
one from the UI, that told me what the properties it "wanted" were, then I was able to supply those in my add-odbcdsn command.
All good, and yet more .bat and vb stuff replaced!
mpleaf

Error codes for shared variables in Labview 8.5?

I am trying to use Shared Variables in Labview 8.5 to enable real-time loops (similar to some of the examples in "Using the LabVIEW Shared Variable", published Aug 28, 2007). I created it to hold the result of a 16-channel A/D converter (so a 16-element I16 array). To avoid losing samples, I used buffering, with a buffer of 5. To test this, I made a pair of VIs, one a producer that stuffs a 16-element I16 array into the shared variable "every so often" (controlled by a timed loop), and a consumer loop that reads the shared variable and does something with the data.
If I think of the buffered shared variable as a Real Time FIFO (as the article suggests it is), I was curious how I would know (a) when the queue was empty, and (b) if the queue had overflowed. Both are necessary if this is to be a practical means of exchanging data -- you want the producer and consumer to run more-or-less at the same rate, but only the producer is deterministic. The consumer needs to be able to run "faster" if it falls behind (for example, because it is writing data to disk), but you don't want it to read data from the shared variable if there's nothing there. [One can always read a shared variable, after all -- as the article states, it simply "holds" the last value written to it].
Snooping around, I discovered that there are "error codes" associated with the shared variable. In particular, a code of -2220 (FFFFF754) seems to signify an empty queue (or a shared variable that has not yet been written to), while a code of -1950678981 (8BBB003B) appears to be "buffer overflow".
Is this documented anywhere? Are there other "error codes" that would be helpful to know? Is there some rationale to these seemingly-random numbers? [It would help to develop code to utilize shared variables if there was a bit less "magic" and "mystery" involved].
For what it is worth, with a buffer of size 40, I could generate 16 I16 values at 1 KHz (simulating sampling from a 16-channel A/D at 1 KHz) and pass it to a consumer node that (a) read from the shared variable until it was empty, then (b) "went to sleep" for 20 msec (simulating "doing something else non-deterministically"), and not miss any data (because I could then empty the Shared Variable RT-FIFO, which should have been half full, before it overflowed on me). Not bad throughput -- I bet I could push it even higher.
Bob Schor

Hey Bob,
The errors are documented in the LabVIEW help:
Shared Variable Error Codes
Real-Time Shared Variable Error Codes
There are several error messages for buffer underflow/overflow depending on the settings of the network or RT FIFO buffers. In particular the -2220 and -2221 are useful for the producer/consumer use case. For example (as you probably know) the consumer can flush a variable using the error code (see the attached image).
Gerardo
Attachments:
variable1.png ‏3 KB

Installation failing, giving error code 7, disabled the firewall and anti virus and rebooted the machine. Still getting error code 7. HELP

Can anybody point me in the right direction to resolve error code 7?

Try an alternative link and validate with your 24 digit serial number - click here for PSE downloads

Board giving error codes for RAM

Similar Messages

Maybe you are looking for