Bogus Cisco AVPair
friends,
I have a particular requirement that i want to pass an AVpair to the ASR 9K BRAS. So that my billing server which is sniffing radius packets can take particular actions based on those Bogus AVPair. BRAS should just ignore or take no action on them.
can someone suggest what can i do here?? Value will be of type integer.
Hi Asad,
Class Attirubte (25) is perfect for this.
It serves no purpose in terms of features, but the attriubte send in access accept is reflected in all the accounting records,
which might help linking them all together.
It is not an integer but a string attribute, but you can of course fill it with an int like value (but will be put as the ascii binary
in the traces obviosuly, so you need to do some type casting)
cheers
xander
Xander Thuijs CCIE #6775
Principal Engineer
ASR9000, CRS, NCS6000 & IOS-XR
Similar Messages
-
Hi,
I want to authenticate my pppoe clients using a radius server. PPPOE client sending a username and password as well as a Service Name (which is detected in Router debug as Service Tag <service name>. I want to send this Service Name (Service Tag) as a Cisco AVPair attribute to my radius server. Can anyone help me to sort out this...
I ve configured aaa authorization network defalut group radius;
radius-attribute vsa send authentication;
radius-attribute vsa send accounting.The Preauthentication Enhancements for Callback feature allows users to dial in to the network access server (NAS) without being charged. This feature enables telecommuters, and other remote network users who dial in, to have the charges applied back to the NAS that they are dialing in to.
When callback is required, the NAS hangs up the current call and dials the caller back. When the NAS performs the callback, only information for the outgoing connection is applied. The rest of the attributes from the preauthentication access-accept message are discarded.
http://www.cisco.com/en/US/docs/ios/12_1t/12_1t5/feature/guide/dtdt2.html -
How to handle Cisco AVPair Attributes
Hello,
i have a little Problem, so I hope you can help me.
I have an external Radius Server and an ASA5520 which submits the IP-address and the address of the DNA-Server to the registering client (with cisco-avpair = ip:addr=x.y.z.w)
How can I submit the corresponding network mask also (ip:netmask= ?)?
Best Regards
Hartmut B.Hi
This depend on which Radius server you're using. If its ACS then.... ACS will send the cisco-av-pair automagically if
1) the aaa client is defined as Cisco IOS
2) you use the ip assignment setting at group/user level
Unfortunately it wont send a netmask as well. So in the group page just scroll down until you see the "RADIUS Cisco IOS" section then locate the cisco-av-pair and just enter
"ip:netmask=foobar"
right in the text entry box.
Then submit + restart and it should all work.
Darran -
Using Cisco-AVpair to collect accouting
Dear all,
I want to use Cisco-AVpair from ACS radius to get the modem connection time (time-start like TACACS+).
Could you help me how to do that.
ThanksThe following document has more information on RADIUS Attribute-Value Pairs.
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/csnt26/usergd26/ap_rads.htm -
Hi!
I'd like to differenciate users sharing the same ldap directory and radius authentication.
For example, if I have a student and a teacher, i'd like to be sure that the student will stay on its vlans and so on.
I can do this by using vlan attributes and aaa override but if I do that, I will have for example a student connected to the teacher SSID but on the student vlan. It's not a pretty situation...
I read that we can use an cisco avpair attribute to force users to connect only on their SSID but it doesn't seem to work with controller.
Is anybody have a solution for my case?
ThanksI've used av-pair on the WLC for Web Splash Page, but not ssid restrictions.
I did however find this documentation: http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807669af.shtml
It refers to configuing a NAR (Network Access Restriction) in ACS which makes it sound like you can limit a user to a specific SSID. -
Cisco-avpair for both NX-OS and IOS
Using freeradius2-2.1.12. I need to setup read-write access for both Cisco NX-OS and IOS devices. I did the following,
DEFAULT Group == operator-rw, Auth-Type = System
Service-Type = NAS-Prompt-User,
cisco-avpair := "shell:roles*\"network-admin vdc-admin priv-lvl=15\""
I can log into both NX-OS and IOS devices; however, IOS devices only permits exec mode not the privileged exec (enable) mode.
Is there a different syntax that can make this work for both NX-OS and IOS?
NormanAs you have noticed IOS and NX-OS are a little bit different. With NX-OS there isn't a "disabled" mode but just netowrk roles. For IOS can try pushing for example "cisco-avpair =shell:priv-lvl=7" and then define a local priv level 7 on the network device with the needed commands
Thank you for rating! -
Cisco ACS4.1- Radius Dynamic VLAN assignment not working
When the users connect their laptop they are getting a authentication prompt but the switch is not changing the VLANs on the port after successfull authentication.Below are the logs on the switch
Jan 28 2013 17:21:32.417 CST: RADIUS: Framed-MTU [12] 6 1500
Jan 28 2013 17:21:32.417 CST: RADIUS: Called-Station-Id [30] 19 "E4-D3-F1-0B-C6-0A"
Jan 28 2013 17:21:32.417 CST: RADIUS: Calling-Station-Id [31] 19 "84-8F-69-A8-BD-1D"
Jan 28 2013 17:21:32.417 CST: RADIUS: EAP-Message [79] 45
Jan 28 2013 17:21:32.417 CST: RADIUS: 02 0E 00 2B 19 00 17 03 01 00 20 8A 07 E9 A6 A9 75 88 06 4A 8C 55 BE 3D EB 49 84 7B 0E 59 5D 3F 93 67 63 82 9C B4 AD 13 9F CA 67 [ + uJU=I{Y]?gcg]
Jan 28 2013 17:21:32.417 CST: RADIUS: Message-Authenticato[80] 18
Jan 28 2013 17:21:32.417 CST: RADIUS: 09 58 21 FE E5 9F 46 44 64 F7 C3 B2 4B 9F C4 35 [ X!FDdK5]
Jan 28 2013 17:21:32.417 CST: RADIUS: EAP-Key-Name [102] 2 *
Jan 28 2013 17:21:32.417 CST: RADIUS: Vendor, Cisco [26] 49
Jan 28 2013 17:21:32.417 CST: RADIUS: Cisco AVpair [1] 43 "audit-session-id=0A0065080000000E524420EE"
Jan 28 2013 17:21:32.417 CST: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
Jan 28 2013 17:21:32.417 CST: RADIUS: NAS-Port [5] 6 50010
Jan 28 2013 17:21:32.417 CST: RADIUS: NAS-Port-Id [87] 21 "GigabitEthernet0/10"
Jan 28 2013 17:21:32.417 CST: RADIUS: State [24] 25
Jan 28 2013 17:21:32.417 CST: RADIUS: 45 41 50 3D 30 2E 32 30 30 2E 31 34 2E 33 3B 53 [EAP=0.200.14.3;S]
Jan 28 2013 17:21:32.417 CST: RADIUS: 56 43 3D 30 2E 38 3B [ VC=0.8;]
Jan 28 2013 17:21:32.417 CST: RADIUS: NAS-IP-Address [4] 6 10.0.101.8
Jan 28 2013 17:21:32.417 CST: RADIUS(00000031): Started 5 sec timeout
Jan 28 2013 17:21:32.425 CST: RADIUS: Received from id 1645/84 10.0.0.20:1645, Access-Accept, len 212
Jan 28 2013 17:21:32.425 CST: RADIUS: authenticator C8 5B D6 8E B2 72 26 F1 - 1B 2D D0 8B 02 96 0D 27
Jan 28 2013 17:21:32.425 CST: RADIUS: Framed-IP-Address [8] 6 255.255.255.255
Jan 28 2013 17:21:32.425 CST: RADIUS: EAP-Message [79] 6
Jan 28 2013 17:21:32.425 CST: RADIUS: 03 0E 00 04
Jan 28 2013 17:21:32.425 CST: RADIUS: Vendor, Microsoft [26] 58
Jan 28 2013 17:21:32.425 CST: RADIUS: MS-MPPE-Send-Key [16] 52 *
Jan 28 2013 17:21:32.425 CST: RADIUS: Vendor, Microsoft [26] 58
Jan 28 2013 17:21:32.425 CST: RADIUS: MS-MPPE-Recv-Key [17] 52 *
Jan 28 2013 17:21:32.425 CST: RADIUS: Tunnel-Type [64] 6 01:VLAN [13]
Jan 28 2013 17:21:32.434 CST: RADIUS: Tunnel-Medium-Type [65] 6 01:ALL_802 [6]
Jan 28 2013 17:21:32.434 CST: RADIUS: Tunnel-Private-Group[81] 6 01:"103"
Jan 28 2013 17:21:32.434 CST: RADIUS: Class [25] 28
Jan 28 2013 17:21:32.434 CST: RADIUS: 43 41 43 53 3A 30 2F 64 65 31 39 63 2F 61 30 30 [CACS:0/de19c/a00]
Jan 28 2013 17:21:32.434 CST: RADIUS: 36 35 30 38 2F 35 30 30 31 30 [ 6508/50010]
Jan 28 2013 17:21:32.434 CST: RADIUS: Message-Authenticato[80] 18
Jan 28 2013 17:21:32.434 CST: RADIUS: C2 71 F0 8E 8D 10 8B 9F F1 8E 21 32 16 7D 7F D6 [ q!2}]
Jan 28 2013 17:21:32.434 CST: RADIUS(00000031): Received from id 1645/84
Jan 28 2013 17:21:32.434 CST: RADIUS/DECODE: EAP-Message fragments, 4, total 4 bytes
Jan 28 2013 17:21:32.434 CST: %DOT1X-5-SUCCESS: Authentication successful for client (848f.69a8.bd1d) on Interface Gi0/10 AuditSessionID
Jan 28 2013 17:21:32.434 CST: %AUTHMGR-7-RESULT: Authentication result 'success' from 'dot1x' for client (848f.69a8.bd1d) on Interface Gi0/10 AuditSessionID 0A0065080000000E524420EE
SiddharthaI should have done little more research before I post this question , found the issue, its the config on the switch.I missed the below line
aaa authorization network default group radius
thanks...
Siddhartha -
Cisco PI 1.3 - Internal Server Error with RADIUS-authentication
Hi,
I have a problem with a Cisco Prime Infrastructure 1.3 (Appliance, fully patched) that I'm trying to authenticate against a Radiator RADIUS-server.
From the RADIUS-server's point of view it looks fine, but I just get an HTTP Status 500 internal error (see attached image) when trying to log in.
I'm not the one managing the RADIUS-server but I got the following debug sent from them:
Wed Oct 30 08:52:06 2013: DEBUG: Packet dump:
*** Received from 10.36.0.132 port 17235 ....
Code: Access-Request
Identifier: 102
Authentic: REMOVED
Attributes:
User-Name = "test-user"
User-Password = REMOVED
NAS-IP-Address = 10.36.0.132
Message-Authenticator = REMOVED
Wed Oct 30 08:52:06 2013: DEBUG: Handling request with Handler 'Client-Identifier=/^prime[.]net[.]REMOVED[.]se$/', Identifier 'Network-Prime-AAA'
Wed Oct 30 08:52:06 2013: DEBUG: Deleting session for test-user, 10.36.0.132,
Wed Oct 30 08:52:06 2013: DEBUG: Handling with Radius::AuthUNIX:
Wed Oct 30 08:52:06 2013: DEBUG: Radius::AuthUNIX looks for match with test-user [test-user]
Wed Oct 30 08:52:06 2013: DEBUG: Radius::AuthUNIX ACCEPT: : test-user [test-user]
Wed Oct 30 08:52:06 2013: DEBUG: AuthBy UNIX result: ACCEPT,
Wed Oct 30 08:52:06 2013: DEBUG: Handling with Radius::AuthFILE:
Wed Oct 30 08:52:06 2013: DEBUG: Radius::AuthFILE looks for match with test-user [test-user]
Wed Oct 30 08:52:06 2013: DEBUG: Radius::AuthFILE ACCEPT: : test-user [test-user]
Wed Oct 30 08:52:06 2013: DEBUG: AuthBy FILE result: ACCEPT,
Wed Oct 30 08:52:06 2013: DEBUG: Access accepted for test-user
Wed Oct 30 08:52:06 2013: DEBUG: Packet dump:
*** Sending to 10.36.0.132 port 17235 ....
Code: Access-Accept
Identifier: 102
Authentic: REMOVED
Attributes:
cisco-avpair = "NCS:virtual-domain0=ROOT-DOMAIN"
cisco-avpair = "NCS:role0=Admin"
cisco-avpair = "NCS:task0=View Alerts and Events"
cisco-avpair = "NCS:task1=Device Reports"
..the rest of the AV-pairs removed
Does anyone have any idea on what the the problem is, or some tips on how to troubleshoot? (rebooting and ncs stop/start has no impact on the issue)
//CharlieI ran into a similar issue this morning in my lab. After I issued ncs status - the database service came back as not running. I stop/started the Prime services and it came up. Once all the services were running my WLC imported with no issues. I also deployed another server for another lab and it had issues with the clocking being out of sync.
-
IEEE 802.1x with EAP-TLS issue in cisco 2960
In My Cisco 2960 switch is not working with EAP-TLS mechanism of 802.1x but its works well with other protocols like EAP-PEAP or MAC Address authentication.
Below is the configuration
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authentication dot1x default group radius
aaa authorization commands 15 default group tacacs+ local
aaa authorization network default group radius
aaa authorization configuration default group radius
aaa accounting update periodic 30
aaa accounting dot1x default start-stop group radius
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 0 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
interface FastEthernet0/1
switchport access vlan 11
switchport mode access
speed 100
duplex full
authentication order dot1x mab webauth
authentication port-control auto
mab
dot1x pae authenticator
dot1x timeout tx-period 3
dot1x timeout supp-timeout 3
spanning-tree portfast
spanning-tree bpduguard enable
Can anyone suggest me ?Thanks for the reply jatin.
I have a client on the interface fa0/1 with a valid client certificate. And have a debug logs as below
*Mar 8 00:03:06.266: dot1x-ev(Fa0/1): Interface state changed to UP
*Mar 8 00:03:06.266: AAA/BIND(000001C7): Bind i/f
*Mar 8 00:03:06.266: dot1x_auth Fa0/1: initial state auth_initialize has enter
*Mar 8 00:03:06.266: dot1x-sm(Fa0/1): 0xB0000DBA:auth_initialize_enter called
*Mar 8 00:03:06.266: dot1x_auth Fa0/1: during state auth_initialize, got event 0(cfg_auto)
*Mar 8 00:03:06.266: @@@ dot1x_auth Fa0/1: auth_initialize -> auth_disconnected
*Mar 8 00:03:06.266: dot1x-sm(Fa0/1): 0xB0000DBA:auth_disconnected_enter called
*Mar 8 00:03:06.266: dot1x_auth Fa0/1: idle during state auth_disconnected
*Mar 8 00:03:06.266: @@@ dot1x_auth Fa0/1: auth_disconnected -> auth_restart
*Mar 8 00:03:06.266: dot1x-sm(Fa0/1): 0xB0000DBA:auth_restart_enter called
*Mar 8 00:03:06.266: dot1x-ev(Fa0/1): Sending create new context event to EAP for 0xB0000DBA (0000.0000.0000)
*Mar 8 00:03:06.266: dot1x_auth_bend Fa0/1: initial state auth_bend_initialize has enter
*Mar 8 00:03:06.266: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_initialize_enter called
*Mar 8 00:03:06.266: dot1x_auth_bend Fa0/1: initial state auth_bend_initialize has idle
*Mar 8 00:03:06.266: dot1x_auth_bend Fa0/1: during state auth_bend_initialize, got event 16383(idle)
*Mar 8 00:03:06.266: @@@ dot1x_auth_bend Fa0/1: auth_bend_initialize -> auth_bend_idle
*Mar 8 00:03:06.266: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_idle_enter called
*Mar 8 00:03:06.266: dot1x-ev(Fa0/1): Created a client entry (0xB0000DBA)
*Mar 8 00:03:06.266: dot1x-ev(Fa0/1): Dot1x authentication started for 0xB0000DBA (0000.0000.0000)
*Mar 8 00:03:06.266: dot1x-ev:DOT1X Supplicant not enabled on FastEthernet0/1
*Mar 8 00:03:06.266: dot1x-sm(Fa0/1): Posting !EAP_RESTART on Client 0xB0000DBA
*Mar 8 00:03:06.266: dot1x_auth Fa0/1: during state auth_restart, got event 6(no_eapRestart)
*Mar 8 00:03:06.266: @@@ dot1x_auth Fa0/1: auth_restart -> auth_connecting
*Mar 8 00:03:06.266: dot1x-sm(Fa0/1): 0xB0000DBA:auth_connecting_enter called
*Mar 8 00:03:06.274: dot1x-sm(Fa0/1): 0xB0000DBA:auth_restart_connecting_action called
*Mar 8 00:03:06.274: dot1x-sm(Fa0/1): Posting RX_REQ on Client 0xB0000DBA
*Mar 8 00:03:06.274: dot1x_auth Fa0/1: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
*Mar 8 00:03:06.274: @@@ dot1x_auth Fa0/1: auth_connecting -> auth_authenticating
*Mar 8 00:03:06.274: dot1x-sm(Fa0/1): 0xB0000DBA:auth_authenticating_enter called
*Mar 8 00:03:06.274: dot1x-sm(Fa0/1): 0xB0000DBA:auth_connecting_authenticating_action called
*Mar 8 00:03:06.274: dot1x-sm(Fa0/1): Posting AUTH_START for 0xB0000DBA
*Mar 8 00:03:06.274: dot1x_auth_bend Fa0/1: during state auth_bend_idle, got event 4(eapReq_authStart)
*Mar 8 00:03:06.274: @@@ dot1x_auth_bend Fa0/1: auth_bend_idle -> auth_bend_request
*Mar 8 00:03:06.274: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_request_enter called
*Mar 8 00:03:06.274: dot1x-ev(Fa0/1): Sending EAPOL packet to group PAE address
*Mar 8 00:03:06.274: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:06.274: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 8 00:03:06.274: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 8 00:03:06.274: EAPOL pak dump Tx
*Mar 8 00:03:06.274: EAPOL Version: 0x3 type: 0x0 length: 0x0005
*Mar 8 00:03:06.274: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
*Mar 8 00:03:06.274: dot1x-packet(Fa0/1): EAPOL packet sent to client 0xB0000DBA (0000.0000.0000)
*Mar 8 00:03:06.274: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_idle_request_action called
*Mar 8 00:03:06.794: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:06.794: dot1x-packet(Fa0/1): queuing an EAPOL pkt on Auth Q
*Mar 8 00:03:06.794: dot1x-ev:Enqueued the eapol packet to the global authenticator queue
*Mar 8 00:03:06.794: EAPOL pak dump rx
*Mar 8 00:03:06.794: EAPOL Version: 0x1 type: 0x1 length: 0x0000
*Mar 8 00:03:06.794: dot1x-ev:
dot1x_auth_queue_event: Int Fa0/1 CODE= 0,TYPE= 0,LEN= 0
*Mar 8 00:03:06.794: dot1x-packet(Fa0/1): Received an EAPOL frame
*Mar 8 00:03:06.794: dot1x-ev(Fa0/1): Received pkt saddr =d43d.7e65.4fc1 , daddr = 0180.c200.0003,
pae-ether-type = 888e.0101.0000
*Mar 8 00:03:06.794: dot1x-ev(Fa0/1): Couldn't find the supplicant in the list
*Mar 8 00:03:06.794: dot1x-ev(Fa0/1): New client detected, notifying AuthMgr
*Mar 8 00:03:06.794: dot1x-ev(Fa0/1): Sending event (0) to Auth Mgr for d43d.7e65.4fc1
*Mar 8 00:03:06.794: dot1x-packet(Fa0/1): Received an EAPOL-Start packet
*Mar 8 00:03:06.794: EAPOL pak dump rx
*Mar 8 00:03:06.794: EAPOL Version: 0x1 type: 0x1 length: 0x0000
*Mar 8 00:03:06.794: dot1x-sm(Fa0/1): Posting EAPOL_START on Client 0xB0000DBA
*Mar 8 00:03:06.794: dot1x_auth Fa0/1: during state auth_authenticating, got event 4(eapolStart)
*Mar 8 00:03:06.794: @@@ dot1x_auth Fa0/1: auth_authenticating -> auth_aborting
*Mar 8 00:03:06.794: dot1x-sm(Fa0/1): 0xB0000DBA:auth_authenticating_exit called
*Mar 8 00:03:06.794: dot1x-sm(Fa0/1): 0xB0000DBA:auth_aborting_enter called
*Mar 8 00:03:06.794: dot1x-ev(Fa0/1): 802.1x method gets the go ahead from Auth Mgr for 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:06.794: %AUTHMGR-5-START: Starting 'dot1x' for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EE240F5BAB
*Mar 8 00:03:06.794: dot1x-sm(Fa0/1): Posting AUTH_ABORT for 0xB0000DBA
*Mar 8 00:03:06.794: dot1x_auth_bend Fa0/1: during state auth_bend_request, got event 1(authAbort)
*Mar 8 00:03:06.794: @@@ dot1x_auth_bend Fa0/1: auth_bend_request -> auth_bend_initialize
*Mar 8 00:03:06.794: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_initialize_enter called
*Mar 8 00:03:06.794: dot1x_auth_bend Fa0/1: idle during state auth_bend_initialize
*Mar 8 00:03:06.794: @@@ dot1x_auth_bend Fa0/1: auth_bend_initialize -> auth_bend_idle
*Mar 8 00:03:06.794: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_idle_enter called
*Mar 8 00:03:06.794: dot1x-sm(Fa0/1): Posting !AUTH_ABORT on Client 0xB0000DBA
*Mar 8 00:03:06.794: dot1x_auth Fa0/1: during state auth_aborting, got event 20(no_eapolLogoff_no_authAbort)
*Mar 8 00:03:06.794: @@@ dot1x_auth Fa0/1: auth_aborting -> auth_restart
*Mar 8 00:03:06.794: dot1x-sm(Fa0/1): 0xB0000DBA:auth_aborting_exit called
*Mar 8 00:03:06.794: dot1x-sm(Fa0/1): 0xB0000DBA:auth_restart_enter called
*Mar 8 00:03:06.794: dot1x-ev(Fa0/1): Resetting the client 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:06.794: dot1x-ev(Fa0/1): Sending create new context event to EAP for 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:06.802: dot1x-sm(Fa0/1): 0xB0000DBA:auth_aborting_restart_action called
*Mar 8 00:03:06.802: dot1x-sm(Fa0/1): Posting !EAP_RESTART on Client 0xB0000DBA
*Mar 8 00:03:06.802: dot1x_auth Fa0/1: during state auth_restart, got event 6(no_eapRestart)
*Mar 8 00:03:06.802: @@@ dot1x_auth Fa0/1: auth_restart -> auth_connecting
*Mar 8 00:03:06.802: dot1x-sm(Fa0/1): 0xB0000DBA:auth_connecting_enter called
*Mar 8 00:03:06.802: dot1x-sm(Fa0/1): 0xB0000DBA:auth_restart_connecting_action called
*Mar 8 00:03:06.811: dot1x-sm(Fa0/1): Posting RX_REQ on Client 0xB0000DBA
*Mar 8 00:03:06.811: dot1x_auth Fa0/1: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
*Mar 8 00:03:06.811: @@@ dot1x_auth Fa0/1: auth_connecting -> auth_authenticating
*Mar 8 00:03:06.811: dot1x-sm(Fa0/1): 0xB0000DBA:auth_authenticating_enter called
*Mar 8 00:03:06.811: dot1x-sm(Fa0/1): 0xB0000DBA:auth_connecting_authenticating_action called
*Mar 8 00:03:06.811: dot1x-sm(Fa0/1): Posting AUTH_START for 0xB0000DBA
*Mar 8 00:03:06.811: dot1x_auth_bend Fa0/1: during state auth_bend_idle, got event 4(eapReq_authStart)
*Mar 8 00:03:06.811: @@@ dot1x_auth_bend Fa0/1: auth_bend_idle -> auth_bend_request
*Mar 8 00:03:06.811: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_request_enter called
*Mar 8 00:03:06.811: dot1x-ev(Fa0/1): Sending EAPOL packet to group PAE address
*Mar 8 00:03:06.811: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:06.811: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 8 00:03:06.811: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 8 00:03:06.811: EAPOL pak dump Tx
*Mar 8 00:03:06.811: EAPOL Version: 0x3 type: 0x0 length: 0x0005
*Mar 8 00:03:06.811: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
*Mar 8 00:03:06.811: dot1x-packet(Fa0/1): EAPOL packet sent to client 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:06.811: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_idle_request_action called
*Mar 8 00:03:06.811: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:06.811: dot1x-packet(Fa0/1): Queuing an EAPOL pkt on Authenticator Q
*Mar 8 00:03:06.811: dot1x-ev:Enqueued the eapol packet to the global authenticator queue
*Mar 8 00:03:06.811: EAPOL pak dump rx
*Mar 8 00:03:06.811: EAPOL Version: 0x1 type: 0x0 length: 0x0022
*Mar 8 00:03:06.811: dot1x-ev:
dot1x_auth_queue_event: Int Fa0/1 CODE= 2,TYPE= 1,LEN= 34
*Mar 8 00:03:06.811: dot1x-packet(Fa0/1): Received an EAPOL frame
*Mar 8 00:03:06.811: dot1x-ev(Fa0/1): Received pkt saddr =d43d.7e65.4fc1 , daddr = 0180.c200.0003,
pae-ether-type = 888e.0100.0022
*Mar 8 00:03:06.811: dot1x-packet(Fa0/1): Received an EAP packet
*Mar 8 00:03:06.811: EAPOL pak dump rx
*Mar 8 00:03:06.811: EAPOL Version: 0x1 type: 0x0 length: 0x0022
*Mar 8 00:03:06.811: dot1x-packet(Fa0/1): Received an EAP packet from d43d.7e65.4fc1
*Mar 8 00:03:06.811: dot1x-sm(Fa0/1): Posting EAPOL_EAP for 0xB0000DBA
*Mar 8 00:03:06.811: dot1x_auth_bend Fa0/1: during state auth_bend_request, got event 6(eapolEap)
*Mar 8 00:03:06.811: @@@ dot1x_auth_bend Fa0/1: auth_bend_request -> auth_bend_response
*Mar 8 00:03:06.811: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_response_enter called
*Mar 8 00:03:06.811: dot1x-ev(Fa0/1): dot1x_sendRespToServer: Response sent to the server from 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:06.811: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_request_response_action called
*Mar 8 00:03:06.811: AAA/AUTHEN/8021X (000001C7): Pick method list 'default'
*Mar 8 00:03:06.819: RADIUS/ENCODE(000001C7):Orig. component type = DOT1X
*Mar 8 00:03:06.819: RADIUS(000001C7): Config NAS IP: 0.0.0.0
*Mar 8 00:03:06.819: RADIUS/ENCODE(000001C7): acct_session_id: 724
*Mar 8 00:03:06.819: RADIUS(000001C7): sending
*Mar 8 00:03:06.819: RADIUS/ENCODE: Best Local IP-Address 10.26.237.11 for Radius-Server 10.26.13.59
*Mar 8 00:03:06.819: RADIUS(000001C7): Send Access-Request to 10.26.13.59:1812 id 1645/83, len 251
*Mar 8 00:03:06.819: RADIUS: authenticator A1 79 FA E5 F4 B7 7F 4F - 2B 73 3A 0D 1F D8 89 20
*Mar 8 00:03:06.819: RADIUS: User-Name [1] 31 "host/D0902MALL005.IN.intranet"
*Mar 8 00:03:06.819: RADIUS: Service-Type [6] 6 Framed [2]
*Mar 8 00:03:06.819: RADIUS: Framed-MTU [12] 6 1500
*Mar 8 00:03:06.819: RADIUS: Called-Station-Id [30] 19 "D4-A0-2A-EE-14-81"
*Mar 8 00:03:06.819: RADIUS: Calling-Station-Id [31] 19 "D4-3D-7E-65-4F-C1"
*Mar 8 00:03:06.819: RADIUS: EAP-Message [79] 36
*Mar 8 00:03:06.819: RADIUS: 02 01 00 22 01 68 6F 73 74 2F 44 30 39 30 32 4D 41 4C 4C 30 ["host/D0902MALL0]
*Mar 8 00:03:06.819: RADIUS: 30 35 2E 49 4E 2E 69 6E 74 72 61 6E 65 74 [ 05.IN.intranet]
*Mar 8 00:03:06.819: RADIUS: Message-Authenticato[80] 18
*Mar 8 00:03:06.819: RADIUS: D6 6F 7B CD 36 46 5E F6 90 6F 85 A8 BD BD AE D8 [ o{6F^o]
*Mar 8 00:03:06.819: RADIUS: EAP-Key-Name [102] 2 *
*Mar 8 00:03:06.819: RADIUS: Vendor, Cisco [26] 49
*Mar 8 00:03:06.819: RADIUS: Cisco AVpair [1] 43 "audit-session-id=0A1AED0B000000EE240F5BAB"
*Mar 8 00:03:06.819: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
*Mar 8 00:03:06.819: RADIUS: NAS-Port [5] 6 50001
*Mar 8 00:03:06.819: RADIUS: NAS-Port-Id [87] 17 "FastEthernet0/1"
*Mar 8 00:03:06.819: RADIUS: NAS-IP-Address [4] 6 10.26.237.11
*Mar 8 00:03:06.819: RADIUS: Acct-Session-Id [44] 10 "000002D4"
*Mar 8 00:03:06.819: RADIUS(000001C7): Started 3 sec timeout
*Mar 8 00:03:06.861: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
*Mar 8 00:03:06.903: RADIUS: Received from id 1645/83 10.26.13.59:1812, Access-Challenge, len 76
*Mar 8 00:03:06.903: RADIUS: authenticator 7B 1C DC CA A8 92 E9 34 - 17 86 25 2F 9D 7E 63 96
*Mar 8 00:03:06.903: RADIUS: EAP-Message [79] 8
*Mar 8 00:03:06.903: RADIUS: 01 02 00 06 0D 20 [ ]
*Mar 8 00:03:06.903: RADIUS: Message-Authenticato[80] 18
*Mar 8 00:03:06.903: RADIUS: DD F3 7B 33 37 6D 40 BD F3 D2 78 DF F1 14 4D E4 [ {37m@xM]
*Mar 8 00:03:06.903: RADIUS: State [24] 30
*Mar 8 00:03:06.903: RADIUS: 00 7D 00 9B 00 C1 00 40 ED B8 45 00 FC DD 50 2E DC 0E E6 03 FC 7B AD 4C B7 E7 B1 70 [ }@EP.{Lp]
*Mar 8 00:03:06.911: RADIUS(000001C7): Received from id 1645/83
*Mar 8 00:03:06.911: RADIUS/DECODE: EAP-Message fragments, 6, total 6 bytes
*Mar 8 00:03:06.911: dot1x-sm(Fa0/1): Posting EAP_REQ for 0xB0000DBA
*Mar 8 00:03:06.911: dot1x_auth_bend Fa0/1: during state auth_bend_response, got event 7(eapReq)
*Mar 8 00:03:06.911: @@@ dot1x_auth_bend Fa0/1: auth_bend_response -> auth_bend_request
*Mar 8 00:03:06.911: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_response_exit called
*Mar 8 00:03:06.911: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_request_enter called
*Mar 8 00:03:06.911: dot1x-ev(Fa0/1): Sending EAPOL packet to group PAE address
*Mar 8 00:03:06.911: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:06.911: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 8 00:03:06.911: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 8 00:03:06.911: EAPOL pak dump Tx
*Mar 8 00:03:06.911: EAPOL Version: 0x3 type: 0x0 length: 0x0006
*Mar 8 00:03:06.911: EAP code: 0x1 id: 0x2 length: 0x0006 type: 0xD
*Mar 8 00:03:06.911: dot1x-packet(Fa0/1): EAPOL packet sent to client 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:06.911: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_response_request_action called
*Mar 8 00:03:06.920: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:06.920: dot1x-packet(Fa0/1): Queuing an EAPOL pkt on Authenticator Q
*Mar 8 00:03:06.920: dot1x-ev:Enqueued the eapol packet to the global authenticator queue
*Mar 8 00:03:06.920: EAPOL pak dump rx
*Mar 8 00:03:06.920: EAPOL Version: 0x1 type: 0x0 length: 0x0069
*Mar 8 00:03:06.920: dot1x-ev:
dot1x_auth_queue_event: Int Fa0/1 CODE= 2,TYPE= 13,LEN= 105
*Mar 8 00:03:06.920: dot1x-packet(Fa0/1): Received an EAPOL frame
*Mar 8 00:03:06.920: dot1x-ev(Fa0/1): Received pkt saddr =d43d.7e65.4fc1 , daddr = 0180.c200.0003,
pae-ether-type = 888e.0100.0069
*Mar 8 00:03:06.920: dot1x-packet(Fa0/1): Received an EAP packet
*Mar 8 00:03:06.920: EAPOL pak dump rx
*Mar 8 00:03:06.920: EAPOL Version: 0x1 type: 0x0 length: 0x0069
*Mar 8 00:03:06.920: dot1x-packet(Fa0/1): Received an EAP packet from d43d.7e65.4fc1
*Mar 8 00:03:06.920: dot1x-sm(Fa0/1): Posting EAPOL_EAP for 0xB0000DBA
*Mar 8 00:03:06.920: dot1x_auth_bend Fa0/1: during state auth_bend_request, got event 6(eapolEap)
*Mar 8 00:03:06.920: @@@ dot1x_auth_bend Fa0/1: auth_bend_request -> auth_bend_response
*Mar 8 00:03:06.920: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_response_enter called
*Mar 8 00:03:06.920: dot1x-ev(Fa0/1): dot1x_sendRespToServer: Response sent to the server from 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:06.920: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_request_response_action called
*Mar 8 00:03:06.920: AAA/AUTHEN/8021X (000001C7): Pick method list 'default'
*Mar 8 00:03:06.920: RADIUS/ENCODE(000001C7):Orig. component type = DOT1X
*Mar 8 00:03:06.920: RADIUS(000001C7): Config NAS IP: 0.0.0.0
*Mar 8 00:03:06.920: RADIUS/ENCODE(000001C7): acct_session_id: 724
*Mar 8 00:03:06.920: RADIUS(000001C7): sending
*Mar 8 00:03:06.920: RADIUS/ENCODE: Best Local IP-Address 10.26.237.11 for Radius-Server 10.26.13.59
*Mar 8 00:03:06.920: RADIUS(000001C7): Send Access-Request to 10.26.13.59:1812 id 1645/84, len 352
*Mar 8 00:03:06.920: RADIUS: authenticator 41 72 8D 6A B4 72 19 84 - 1B C8 33 F7 95 DD 07 BC
*Mar 8 00:03:06.928: RADIUS: User-Name [1] 31 "host/D0902MALL005.IN.intranet"
*Mar 8 00:03:06.928: RADIUS: Service-Type [6] 6 Framed [2]
*Mar 8 00:03:06.928: RADIUS: Framed-MTU [12] 6 1500
*Mar 8 00:03:06.928: RADIUS: Called-Station-Id [30] 19 "D4-A0-2A-EE-14-81"
*Mar 8 00:03:06.928: RADIUS: Calling-Station-Id [31] 19 "D4-3D-7E-65-4F-C1"
*Mar 8 00:03:06.928: RADIUS: EAP-Message [79] 107
*Mar 8 00:03:06.928: RADIUS: 02 02 00 69 0D 80 00 00 00 5F 16 03 01 00 5A 01 00 00 56 03 01 52 C5 45 4F 07 CA B3 29 50 A7 CE 40 76 B6 BD F0 50 D4 CE 9A 8A 02 C4 3D 40 35 B5 F0 E1 E2 75 [i_ZVREO)P@vP=@5u]
*Mar 8 00:03:06.928: RADIUS: 50 00 00 18 00 2F 00 35 00 05 00 0A C0 13 C0 14 C0 09 C0 0A 00 32 00 38 00 13 00 04 01 00 00 15 FF 01 00 01 00 00 0A 00 06 00 04 00 17 00 18 00 0B 00 02 01 00 [ P/528]
*Mar 8 00:03:06.928: RADIUS: Message-Authenticato[80] 18
*Mar 8 00:03:06.928: RADIUS: A3 28 CE 27 20 C0 D6 2C 11 01 D6 61 1F C3 6F 03 [ (' ,ao]
*Mar 8 00:03:06.928: RADIUS: EAP-Key-Name [102] 2 *
*Mar 8 00:03:06.928: RADIUS: Vendor, Cisco [26] 49
*Mar 8 00:03:06.928: RADIUS: Cisco AVpair [1] 43 "audit-session-id=0A1AED0B000000EE240F5BAB"
*Mar 8 00:03:06.928: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
*Mar 8 00:03:06.928: RADIUS: NAS-Port [5] 6 50001
*Mar 8 00:03:06.928: RADIUS: NAS-Port-Id [87] 17 "FastEthernet0/1"
*Mar 8 00:03:06.928: RADIUS: State [24] 30
*Mar 8 00:03:06.928: RADIUS: 00 7D 00 9B 00 C1 00 40 ED B8 45 00 FC DD 50 2E DC 0E E6 03 FC 7B AD 4C B7 E7 B1 70 [ }@EP.{Lp]
*Mar 8 00:03:06.928: RADIUS: NAS-IP-Address [4] 6 10.26.237.11
*Mar 8 00:03:06.928: RADIUS: Acct-Session-Id [44] 10 "000002D4"
*Mar 8 00:03:06.928: RADIUS(000001C7): Started 3 sec timeout
*Mar 8 00:03:07.004: RADIUS: Received from id 1645/84 10.26.13.59:1812, Access-Challenge, len 1188
*Mar 8 00:03:07.004: RADIUS: authenticator 7B 52 29 05 7E C3 EF 8E - 13 38 30 03 4B 65 64 0F
*Mar 8 00:03:07.004: RADIUS: EAP-Message [79] 255
*Mar 8 00:03:07.004: RADIUS: 01 03 04 56 0D C0 00 00 05 78 16 03 01 00 51 02 00 00 4D 03 01 52 C5 45 4F 0F 04 37 77 A0 C2 68 66 4E 45 92 AB 3D 7F 94 70 AF 36 [VxQMREO7whfNE=p6]
*Mar 8 00:03:07.004: RADIUS: 1D C5 17 23 5C F1 FA CA 60 B0 20 A5 48 16 D5 3F F9 B0 FF 38 1D D5 13 B3 88 13 06 EF DC 87 5C AE 17 E7 7E 80 84 21 58 64 F7 A6 36 00 35 00 00 05 FF 01 00 01 00 16 03 01 02 1C 0B 00 02 18 00 02 15 00 02 12 30 82 02 0E 30 [#\` H?8\~!Xd6500]
*Mar 8 00:03:07.004: RADIUS: 82 01 77 A0 03 02 01 02 02 09 00 88 7A CB 35 3F 1E 3E 62 30 0D 06 09 2A 86 48 86 F7 0D 01 01 05 05 00 30 2F 31 15 30 13 06 03 55 04 03 13 0C 53 50 [wz5?>b0*H0/10USP]
*Mar 8 00:03:07.004: RADIUS: 49 4E 41 56 44 30 30 30 30 34 31 16 30 14 06 03 55 04 0A 13 0D 50 6F 6C [INAVD0000410UPol]
*Mar 8 00:03:07.004: RADIUS: 69 63 79 4D 61 6E 61 67 65 72 30 1E 17 0D 31 33 30 38 32 [icyManager013082]
*Mar 8 00:03:07.004: RADIUS: 37 30 37 32 34 33 30 5A 17 0D 31 34 30 38 32 37 30 37 [7072430Z14082707]
*Mar 8 00:03:07.004: RADIUS: 32 34 33 30 5A 30 2F 31 15 30 13 06 03 55 04 03 13 0C 53 50 49 4E 41 56 [2430Z0/10USPINAV]
*Mar 8 00:03:07.004: RADIUS: 44 30 30 [ D00]
*Mar 8 00:03:07.004: RADIUS: EAP-Message [79] 255
*Mar 8 00:03:07.004: RADIUS: 30 30 34 31 16 30 14 06 03 55 04 0A 13 0D 50 6F 6C 69 63 79 4D 61 6E 61 [00410UPolicyMana]
*Mar 8 00:03:07.004: RADIUS: 67 65 72 30 81 9F 30 0D 06 09 2A 86 48 86 F7 0D 01 01 01 05 00 03 81 8D 00 30 81 89 02 81 81 00 C9 B9 03 65 83 EB 39 86 14 BC 95 7B DB 07 7E C5 8A D7 DA C7 8A CA 5A 88 6E 0B 93 06 35 57 [ger00*H0e9{~Zn5W]
*Mar 8 00:03:07.012: RADIUS: 6E DE 93 CD C9 FE 8E 9F E1 5F A9 04 5C BD A9 AD 5A 04 6E 35 47 76 A1 58 E5 C4 32 D7 49 9E 17 75 20 C6 6F 45 40 [n_\Zn5GvX2Iu oE@]
*Mar 8 00:03:07.012: RADIUS: AC EF 40 6D 15 38 F9 C2 28 7E C9 68 37 52 3B BF F4 C1 5E B8 BA 46 68 43 79 B1 65 66 [@m8(~h7R;^FhCyef]
*Mar 8 00:03:07.012: RADIUS: 9E 58 ED EC 8C 95 A2 D8 BF AA 77 AC 85 90 E3 AB C6 27 3A A2 22 AC 1C 48 B3 BF BE F7 85 CF 5C BB 2D 02 03 01 00 01 A3 32 30 30 30 0F 06 03 55 1D 11 04 08 30 06 87 04 0A 1A 0D 3B 30 [Xw':"H\-2000U0;0]
*Mar 8 00:03:07.012: RADIUS: 1D 06 03 55 1D 25 04 16 30 14 06 08 2B 06 01 05 05 07 03 01 06 08 2B 06 01 05 05 07 03 03 30 0D 06 09 2A 86 48 86 F7 0D 01 01 [ U?0++0*H]
*Mar 8 00:03:07.012: RADIUS: EAP-Message [79] 255
*Mar 8 00:03:07.012: RADIUS: 05 05 00 03 81 81 00 C4 46 3E 38 3D 53 0F 28 34 C1 A6 ED DC 70 76 9B 70 6B A8 95 7C 44 8E 7D 6E D6 8B 6D [F>8=S(4pvpk|D}nm]
*Mar 8 00:03:07.012: RADIUS: 90 49 83 06 E4 BF 68 2F 9D 77 78 A3 76 76 19 84 AD 26 3F F3 ED AA 88 52 35 0E 35 DD 00 E5 96 88 44 30 79 A0 71 [Ih/wxvv&?R55D0yq]
*Mar 8 00:03:07.012: RADIUS: 8D 25 3E 77 A0 E0 43 92 33 55 40 E1 C8 EE 88 11 25 E2 70 28 11 6C 5A 4E 3D F1 93 57 0A 6F [?>wC3U@?p(lZN=Wo]
*Mar 8 00:03:07.012: RADIUS: 36 51 72 04 08 C0 C0 DF F0 94 A9 F7 A1 05 C8 37 D6 F8 D4 9C 20 1A 7B CD 2C 17 83 7B 8E 20 F7 2D B6 16 03 01 02 FC 0D 00 02 F4 03 01 02 40 02 EE 00 63 30 61 31 0B 30 [6Qr7 {,{ -@c0a10]
*Mar 8 00:03:07.012: RADIUS: 09 06 03 55 04 06 13 02 55 53 31 15 30 13 06 03 55 04 0A 13 0C 44 69 67 69 43 65 72 74 20 49 [UUS10UDigiCert I]
*Mar 8 00:03:07.012: RADIUS: 6E 63 31 19 30 17 06 03 55 04 0B 13 10 77 77 77 2E 64 69 67 69 63 65 72 [nc10Uwww.digicer]
*Mar 8 00:03:07.012: RADIUS: 74 2E 63 6F 6D 31 20 30 1E 06 03 55 04 03 13 17 44 69 67 69 43 65 72 [t.com1 0UDigiCer]
*Mar 8 00:03:07.012: RADIUS: 74 20 47 6C 6F 62 61 6C 20 52 6F 6F 74 20 43 41 [t Global Root CA]
*Mar 8 00:03:07.012: RADIUS: 00 48 [ H]
*Mar 8 00:03:07.012: RADIUS: EAP-Message [79] 255
*Mar 8 00:03:07.012: RADIUS: 30 46 31 18 30 16 06 0A 09 92 26 89 93 F2 2C 64 01 19 16 08 69 6E 74 72 61 6E 65 74 31 [0F10&,dintranet1]
*Mar 8 00:03:07.020: RADIUS: 12 30 10 06 0A 09 92 26 89 93 F2 2C 64 01 19 16 02 49 4E 31 16 30 14 06 03 55 04 03 13 0D 49 6E 64 69 61 20 52 [0&,dIN10UIndia R]
*Mar 8 00:03:07.020: RADIUS: 6F 6F 74 20 43 41 00 4A 30 48 31 18 30 16 06 0A 09 92 26 89 93 F2 2C 64 01 19 16 08 69 6E [oot CAJ0H10&,din]
*Mar 8 00:03:07.020: RADIUS: 74 72 61 6E 65 74 31 12 30 10 06 0A 09 92 26 89 93 F2 2C 64 01 19 16 02 49 4E 31 18 30 16 06 03 55 [tranet10&,dIN10U]
*Mar 8 00:03:07.020: RADIUS: 04 03 13 0F 45 6E 74 65 72 70 72 69 73 65 20 43 41 2D 31 00 4D [Enterprise CA-1M]
*Mar 8 00:03:07.020: RADIUS: 30 4B 31 18 30 16 06 0A 09 92 26 89 93 F2 2C 64 01 19 16 08 69 6E 74 72 61 6E 65 74 31 [0K10&,dintranet1]
*Mar 8 00:03:07.020: RADIUS: 12 30 10 06 0A 09 92 26 89 93 F2 2C 64 01 19 16 02 49 4E 31 1B 30 19 06 03 55 04 03 13 12 49 4E 2D 53 50 49 4E [0&,dIN10UIN-SPIN]
*Mar 8 00:03:07.020: RADIUS: 43 52 54 30 30 30 30 33 2D 43 41 00 D5 30 81 D2 31 0B 30 09 06 03 55 04 06 13 02 55 [CRT00003-CA010UU]
*Mar 8 00:03:07.020: RADIUS: 53 31 13 30 11 06 03 55 04 [ S10U]
*Mar 8 00:03:07.020: RADIUS: EAP-Message [79] 100
*Mar 8 00:03:07.020: RADIUS: 08 0C 0A 43 61 6C 69 66 6F 72 6E 69 61 31 12 30 10 06 03 55 04 07 0C 09 53 75 6E [California10USun]
*Mar 8 00:03:07.020: RADIUS: 6E 79 76 61 6C 65 31 17 30 15 06 03 55 04 0A 0C 0E 41 72 75 62 61 20 4E [nyvale10UAruba N]
*Mar 8 00:03:07.020: RADIUS: 65 74 77 6F 72 6B 73 31 40 30 3E 06 03 55 04 03 0C 37 43 6C 65 [etworks1@0>U7Cle]
*Mar 8 00:03:07.020: RADIUS: 61 72 50 61 73 73 20 4F 6E 62 6F 61 72 64 20 4C [arPass Onboard L]
*Mar 8 00:03:07.020: RADIUS: 6F 63 61 6C 20 43 65 72 74 69 [ ocal Certi]
*Mar 8 00:03:07.020: RADIUS: Message-Authenticato[80] 18
*Mar 8 00:03:07.020: RADIUS: 12 75 40 41 6F 40 6B 6F A5 FE AB 85 F3 B3 CF A4 [ u@Ao@ko]
*Mar 8 00:03:07.020: RADIUS: State [24] 30
*Mar 8 00:03:07.020: RADIUS: 00 6F 00 51 00 4B 00 6E EE B8 45 00 4B AA 6B A9 B6 D6 C8 CC 48 1A 91 99 7F 77 D3 C1 [ oQKnEKkHw]
*Mar 8 00:03:07.029: RADIUS(000001C7): Received from id 1645/84
*Mar 8 00:03:07.029: RADIUS/DECODE: EAP-Message fragments, 253+253+253+253+98, total 1110 bytes
*Mar 8 00:03:07.037: dot1x-sm(Fa0/1): Posting EAP_REQ for 0xB0000DBA
*Mar 8 00:03:07.037: dot1x_auth_bend Fa0/1: during state auth_bend_response, got event 7(eapReq)
*Mar 8 00:03:07.037: @@@ dot1x_auth_bend Fa0/1: auth_bend_response -> auth_bend_request
*Mar 8 00:03:07.037: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_response_exit called
*Mar 8 00:03:07.037: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_request_enter called
*Mar 8 00:03:07.037: dot1x-ev(Fa0/1): Sending EAPOL packet to group PAE address
*Mar 8 00:03:07.037: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:07.037: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 8 00:03:07.037: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 8 00:03:07.037: EAPOL pak dump Tx
*Mar 8 00:03:07.037: EAPOL Version: 0x3 type: 0x0 length: 0x0456
*Mar 8 00:03:07.037: EAP code: 0x1 id: 0x3 length: 0x0456 type: 0xD
*Mar 8 00:03:07.037: dot1x-packet(Fa0/1): EAPOL packet sent to client 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:07.037: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_response_request_action called
*Mar 8 00:03:07.037: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:07.037: dot1x-packet(Fa0/1): Queuing an EAPOL pkt on Authenticator Q
*Mar 8 00:03:07.037: dot1x-ev:Enqueued the eapol packet to the global authenticator queue
*Mar 8 00:03:07.037: EAPOL pak dump rx
*Mar 8 00:03:07.037: EAPOL Version: 0x1 type: 0x0 length: 0x0006
*Mar 8 00:03:07.037: dot1x-ev:
dot1x_auth_queue_event: Int Fa0/1 CODE= 2,TYPE= 13,LEN= 6
*Mar 8 00:03:07.037: dot1x-packet(Fa0/1): Received an EAPOL frame
*Mar 8 00:03:07.037: dot1x-ev(Fa0/1): Received pkt saddr =d43d.7e65.4fc1 , daddr = 0180.c200.0003,
pae-ether-type = 888e.0100.0006
*Mar 8 00:03:07.037: dot1x-packet(Fa0/1): Received an EAP packet
*Mar 8 00:03:07.037: EAPOL pak dump rx
*Mar 8 00:03:07.037: EAPOL Version: 0x1 type: 0x0 length: 0x0006
*Mar 8 00:03:07.037: dot1x-packet(Fa0/1): Received an EAP packet from d43d.7e65.4fc1
*Mar 8 00:03:07.037: dot1x-sm(Fa0/1): Posting EAPOL_EAP for 0xB0000DBA
*Mar 8 00:03:07.037: dot1x_auth_bend Fa0/1: during state auth_bend_request, got event 6(eapolEap)
*Mar 8 00:03:07.037: @@@ dot1x_auth_bend Fa0/1: auth_bend_request -> auth_bend_response
*Mar 8 00:03:07.037: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_response_enter called
*Mar 8 00:03:07.037: dot1x-ev(Fa0/1): dot1x_sendRespToServer: Response sent to the server from 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:07.037: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_request_response_action called
*Mar 8 00:03:07.037: AAA/AUTHEN/8021X (000001C7): Pick method list 'default'
*Mar 8 00:03:07.046: RADIUS/ENCODE(000001C7):Orig. component type = DOT1X
*Mar 8 00:03:07.046: RADIUS(000001C7): Config NAS IP: 0.0.0.0
*Mar 8 00:03:07.046: RADIUS/ENCODE(000001C7): acct_session_id: 724
*Mar 8 00:03:07.046: RADIUS(000001C7): sending
*Mar 8 00:03:07.046: RADIUS/ENCODE: Best Local IP-Address 10.26.237.11 for Radius-Server 10.26.13.59
*Mar 8 00:03:07.046: RADIUS(000001C7): Send Access-Request to 10.26.13.59:1812 id 1645/85, len 253
*Mar 8 00:03:07.046: RADIUS: authenticator 1C D7 6D 40 A3 D6 BA B1 - A7 E6 70 DA 32 83 2E 19
*Mar 8 00:03:07.046: RADIUS: User-Name [1] 31 "host/D0902MALL005.IN.intranet"
*Mar 8 00:03:07.046: RADIUS: Service-Type [6] 6 Framed [2]
*Mar 8 00:03:07.046: RADIUS: Framed-MTU [12] 6 1500
*Mar 8 00:03:07.046: RADIUS: Called-Station-Id [30] 19 "D4-A0-2A-EE-14-81"
*Mar 8 00:03:07.046: RADIUS: Calling-Station-Id [31] 19 "D4-3D-7E-65-4F-C1"
*Mar 8 00:03:07.046: RADIUS: EAP-Message [79] 8
*Mar 8 00:03:07.046: RADIUS: 02 03 00 06 0D 00
*Mar 8 00:03:07.046: RADIUS: Message-Authenticato[80] 18
*Mar 8 00:03:07.046: RADIUS: 73 1D 89 5C 66 19 32 B6 63 C2 64 C1 04 42 A9 F9 [ s\f2cdB]
*Mar 8 00:03:07.046: RADIUS: EAP-Key-Name [102] 2 *
*Mar 8 00:03:07.046: RADIUS: Vendor, Cisco [26] 49
*Mar 8 00:03:07.046: RADIUS: Cisco AVpair [1] 43 "audit-session-id=0A1AED0B000000EE240F5BAB"
*Mar 8 00:03:07.046: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
*Mar 8 00:03:07.046: RADIUS: NAS-Port [5] 6 50001
*Mar 8 00:03:07.046: RADIUS: NAS-Port-Id [87] 17 "FastEthernet0/1"
*Mar 8 00:03:07.046: RADIUS: State [24] 30
*Mar 8 00:03:07.046: RADIUS: 00 6F 00 51 00 4B 00 6E EE B8 45 00 4B AA 6B A9 B6 D6 C8 CC 48 1A 91 99 7F 77 D3 C1 [ oQKnEKkHw]
*Mar 8 00:03:07.046: RADIUS: NAS-IP-Address [4] 6 10.26.237.11
*Mar 8 00:03:07.046: RADIUS: Acct-Session-Id [44] 10 "000002D4"
*Mar 8 00:03:07.046: RADIUS(000001C7): Started 3 sec timeout
*Mar 8 00:03:07.113: RADIUS: Received from id 1645/85 10.26.13.59:1812, Access-Challenge, len 378
*Mar 8 00:03:07.113: RADIUS: authenticator 1A 85 26 09 58 84 BC D4 - E0 A9 E3 C0 25 31 2D 31
*Mar 8 00:03:07.113: RADIUS: EAP-Message [79] 255
*Mar 8 00:03:07.121: RADIUS: 01 04 01 32 0D 00 66 69 63 61 74 65 20 41 75 74 68 6F 72 69 74 [2ficate Authorit]
*Mar 8 00:03:07.121: RADIUS: 79 20 28 53 69 67 6E 69 6E 67 29 31 3F 30 3D 06 09 2A [y (Signing)1?0=*]
*Mar 8 00:03:07.121: RADIUS: 86 48 86 F7 0D 01 09 01 16 30 64 36 62 62 34 66 37 30 2D 66 34 31 32 2D [H0d6bb4f70-f412-]
*Mar 8 00:03:07.121: RADIUS: 34 35 35 32 2D 61 65 65 32 2D 63 37 61 30 32 36 [4552-aee2-c7a026]
*Mar 8 00:03:07.121: RADIUS: 66 62 61 32 31 38 40 65 78 61 6D 70 6C 65 2E 63 [[email protected]]
*Mar 8 00:03:07.121: RADIUS: 6F 6D 00 CB 30 81 C8 31 0B 30 09 06 03 55 04 06 13 02 55 53 31 13 30 11 06 03 55 04 08 0C 0A 43 61 6C 69 66 [om010UUS10UCalif]
*Mar 8 00:03:07.121: RADIUS: 6F 72 6E 69 61 31 12 30 10 06 03 55 04 07 0C 09 53 75 6E 6E 79 76 61 6C [ornia10USunnyval]
*Mar 8 00:03:07.121: RADIUS: 65 31 17 30 15 06 03 55 04 0A 0C 0E 41 72 75 62 61 20 4E 65 74 77 6F 72 [e10UAruba Networ]
*Mar 8 00:03:07.121: RADIUS: 6B 73 31 36 30 34 06 03 55 04 03 0C 2D 43 6C 65 61 72 50 61 73 [ks1604U-ClearPas]
*Mar 8 00:03:07.121: RADIUS: 73 20 4F 6E 62 6F 61 72 64 20 4C 6F 63 61 6C 20 [s Onboard Local ]
*Mar 8 00:03:07.121: RADIUS: 43 65 72 74 69 66 69 63 61 74 65 20 41 75 74 68 [Certificate Auth]
*Mar 8 00:03:07.121: RADIUS: 6F 72 69 74 79 31 3F 30 3D 06 09 2A 86 48 86 F7 0D 01 09 01 16 [ ority1?0=*H]
*Mar 8 00:03:07.121: RADIUS: EAP-Message [79] 55
*Mar 8 00:03:07.121: RADIUS: 30 64 36 62 62 34 66 37 30 2D 66 34 31 32 2D 34 [0d6bb4f70-f412-4]
*Mar 8 00:03:07.121: RADIUS: 35 35 32 2D 61 65 65 32 2D 63 37 61 30 32 36 66 [552-aee2-c7a026f]
*Mar 8 00:03:07.121: RADIUS: 62 61 32 31 38 40 65 78 61 6D 70 6C 65 2E 63 6F [[email protected]]
*Mar 8 00:03:07.121: RADIUS: 6D 0E 00 00 00 [ m]
*Mar 8 00:03:07.121: RADIUS: Message-Authenticato[80] 18
*Mar 8 00:03:07.121: RADIUS: 4C 46 AA B9 A5 D5 DF EA DB E7 2B 7B 51 7E 58 3F [ LF+{Q~X?]
*Mar 8 00:03:07.121: RADIUS: State [24] 30
*Mar 8 00:03:07.121: RADIUS: 00 EF 00 B9 00 0A 00 00 EF B8 45 00 EF D2 C4 3C 81 6C 72 0E 23 FE 11 EA 12 17 50 A1 [ E
*Mar 8 00:03:07.121: RADIUS(000001C7): Received from id 1645/85
*Mar 8 00:03:07.121: RADIUS/DECODE: EAP-Message fragments, 253+53, total 306 bytes
*Mar 8 00:03:07.130: dot1x-sm(Fa0/1): Posting EAP_REQ for 0xB0000DBA
*Mar 8 00:03:07.130: dot1x_auth_bend Fa0/1: during state auth_bend_response, got event 7(eapReq)
*Mar 8 00:03:07.130: @@@ dot1x_auth_bend Fa0/1: auth_bend_response -> auth_bend_request
*Mar 8 00:03:07.130: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_response_exit called
*Mar 8 00:03:07.130: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_request_enter called
*Mar 8 00:03:07.130: dot1x-ev(Fa0/1): Sending EAPOL packet to group PAE address
*Mar 8 00:03:07.130: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:07.130: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 8 00:03:07.130: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 8 00:03:07.130: EAPOL pak dump Tx
*Mar 8 00:03:07.130: EAPOL Version: 0x3 type: 0x0 length: 0x0132
*Mar 8 00:03:07.130: EAP code: 0x1 id: 0x4 length: 0x0132 type: 0xD
*Mar 8 00:03:07.130: dot1x-packet(Fa0/1): EAPOL packet sent to client 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:07.130: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_response_request_action called
*Mar 8 00:03:07.138: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:07.138: dot1x-packet(Fa0/1): Queuing an EAPOL pkt on Authenticator Q
*Mar 8 00:03:07.138: dot1x-ev:Enqueued the eapol packet to the global authenticator queue
*Mar 8 00:03:07.138: EAPOL pak dump rx
*Mar 8 00:03:07.138: EAPOL Version: 0x1 type: 0x0 length: 0x05D4
*Mar 8 00:03:07.138: dot1x-ev:
dot1x_auth_queue_event: Int Fa0/1 CODE= 2,TYPE= 13,LEN= 1492
*Mar 8 00:03:07.138: dot1x-packet(Fa0/1): Received an EAPOL frame
*Mar 8 00:03:07.138: dot1x-ev(Fa0/1):
^Z
Malleswaram_2960#
*Mar 8 00:03:07.180: RADIUS: State [24] 30
*Mar 8 00:03:07.180: RADIUS: 00 EF 00 B9 00 0A 00 00 EF B8 45 00 EF D2 C4 3C 81 6C 72 0E 23 FE 11 EA 12 17 50 A1 [ E
*Mar 8 00:03:07.180: RADIUS: NAS-IP-Address [4] 6 10.26.237.11
*Mar 8 00:03:07.180: RADIUS: Acct-Session-Id [44] 10 "000002D4"
*Mar 8 00:03:07.180: RADIUS(000001C7): Started 3 sec timeout
Malleswaram_2960#
*Mar 8 00:03:07.893: %SYS-5-CONFIG_I: Configured from console by jameela on vty0 (10.26.20.5)
Malleswaram_2960#
*Mar 8 00:03:10.225: RADIUS(000001C7): Request timed out
*Mar 8 00:03:10.225: RADIUS: Retransmit to (10.26.13.59:1812,1813) for id 1645/86
*Mar 8 00:03:10.225: RADIUS(000001C7): Started 3 sec timeout
Malleswaram_2960#
*Mar 8 00:03:13.354: RADIUS(000001C7): Request timed out
*Mar 8 00:03:13.354: RADIUS: Retransmit to (10.26.13.59:1812,1813) for id 1645/86
*Mar 8 00:03:13.354: RADIUS(000001C7): Started 3 sec timeout
Malleswaram_2960#
*Mar 8 00:03:16.307: RADIUS(000001C7): Request timed out
*Mar 8 00:03:16.307: RADIUS: Retransmit to (10.26.13.59:1812,1813) for id 1645/86
*Mar 8 00:03:16.307: RADIUS(000001C7): Started 3 sec timeout
Malleswaram_2960#
*Mar 8 00:03:19.369: RADIUS(000001C7): Request timed out
*Mar 8 00:03:19.369: RADIUS: Retransmit to (10.26.13.59:1812,1813) for id 1645/86
*Mar 8 00:03:19.369: RADIUS(000001C7): Started 3 sec timeout
Malleswaram_2960#
*Mar 8 00:03:22.456: RADIUS(000001C7): Request timed out
*Mar 8 00:03:22.456: RADIUS: Fail-over denied to (10.26.13.59:1812,1813) for id 1645/86
*Mar 8 00:03:22.456: RADIUS: No response from (10.26.13.59:1812,1813) for id 1645/86
*Mar 8 00:03:22.456: RADIUS/DECODE: parse response no app start; FAIL
*Mar 8 00:03:22.456: RADIUS/DECODE: parse response; FAIL
*Mar 8 00:03:22.456: dot1x-ev(Fa0/1): Received an EAP Fail
*Mar 8 00:03:22.456: dot1x-sm(Fa0/1): Posting EAP_FAIL for 0xB0000DBA
*Mar 8 00:03:22.456: dot1x_auth_bend Fa0/1: during state auth_bend_response, got event 10(eapFail)
*Mar 8 00:03:22.456: @@@ dot1x_auth_bend Fa0/1: auth_bend_response -> auth_bend_fail
*Mar 8 00:03:22.456: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_response_exit called
*Mar 8 00:03:22.456: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_fail_enter called
*Mar 8 00:03:22.456: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_response_fail_action called
*Mar 8 00:03:22.456: dot1x_auth_bend Fa0/1: idle during state auth_bend_fail
*Mar 8 00:03:22.456: @@@ dot1x_auth_bend Fa0/1: auth_bend_fail -> auth_bend_idle
*Mar 8 00:03:22.456: dot1x-sm(Fa0/1): 0xB0000DBA:auth_bend_idle_enter called
*Mar 8 00:03:22.456: dot1x-sm(Fa0/1): Posting AUTH_FAIL on Client 0xB0000DBA
*Mar 8 00:03:22.456: dot1x_auth Fa0/1: during state auth_authenticating, got event 15(authFail)
*Mar 8 00:03:22.456: @@@ dot1x_auth Fa0/1: auth_authenticating -> auth_authc_result
*Mar 8 00:03:22.456: dot1x-sm(Fa0/1): 0xB0000DBA:auth_authenticating_exit called
*Mar 8 00:03:22.456: dot1x-sm(Fa0/1): 0xB0000DBA:auth_authc_result_enter called
*Mar 8 00:03:22.456: %DOT1X-5-FAIL: Authentication failed for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID
*Mar 8 00:03:22.456: dot1x-ev(Fa0/1): Sending event (2) to Auth Mgr for d43d.7e65.4fc1
*Mar 8 00:03:22.456: %AUTHMGR-7-RESULT: Authentication result 'fail' from 'dot1x' for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EE240F5BAB
*Mar 8 00:03:22.456: %AUTHMGR-5-FAIL: Authorization failed for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EE240F5BAB
*Mar 8 00:03:22.456: dot1x-redundancy: State for client d43d.7e65.4fc1 successfully retrieved
*Mar 8 00:03:22.456: dot1x-ev(Fa0/1): Received Authz fail for the client 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:22.456: dot1x-sm(Fa0/1): Posting_AUTHZ_FAIL on Client 0xB0000DBA
*Mar 8 00:03:22.456: dot1x_auth Fa0/1: during state auth_authc_result, got event 22(authzFail)
*Mar 8 00:03:22.456: @@@ dot1x_auth Fa0/1: auth_authc_result -> auth_held
*Mar 8 00:03:22.456: dot1x-sm(Fa0/1): 0xB0000DBA:auth_held_enter called
*Mar 8 00:03:22.464: dot1x-ev(Fa0/1): Sending EAPOL packet to group PAE address
*Mar 8 00:03:22.464: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:22.464: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 8 00:03:22.464: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 8 00:03:22.464: EAPOL pak dump Tx
*Mar 8 00:03:22.464: EAPOL Version: 0x3 type: 0x0 length: 0x0004
*Mar 8 00:03:22.464: EAP code: 0x4 id: 0x4 length: 0x0004
*Mar 8 00:03:22.464: dot1x-packet(Fa0/1): EAPOL packet sent to client 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:22.464: dot1x-sm(Fa0/1): Posting FAILOVER_RETRY on Client 0xB0000DBA
*Mar 8 00:03:22.464: dot1x_auth Fa0/1: during state auth_held, got event 21(failover_retry)
*Mar 8 00:03:22.464: @@@ dot1x_auth Fa0/1: auth_held -> auth_restart
*Mar 8 00:03:22.464: dot1x-sm(Fa0/1): 0xB0000DBA:auth_held_exit called
*Mar 8 00:03:22.464: dot1x-sm(Fa0/1): 0xB0000DBA:auth_restart_enter called
*Mar 8 00:03:22.464: dot1x-ev(Fa0/1): Sending create new context event to EAP for 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:22.464: dot1x-sm(Fa0/1): 0xB0000DBA:auth_held_restart_action called
*Mar 8 00:03:22.464: dot1x-sm(Fa0/1): Posting !EAP_RESTART on Client 0xB0000DBA
*Mar 8 00:03:22.464: dot1x_auth Fa0/1: during state auth_restart, got event 6(no_eapRestart)
*Mar 8 00:03:22.464: @@@ dot1x_auth Fa0/1: auth_restart -> auth_connecting
*Mar 8 00:03:22.464: dot1x-sm(Fa0/1): 0xB0000DBA:auth_connecting_enter called
*Mar 8 00:03:22.464: dot1x-sm(Fa0/1): 0xB0000DBA:auth_restart_connecting_action called
*Mar 8 00:03:22.464: dot1x-sm(Fa0/1): Posting REAUTH_MAX on Client 0xB0000DBA
*Mar 8 00:03:22.464: dot1x_auth Fa0/1: during state auth_connecting, got event 11(reAuthMax)
*Mar 8 00:03:22.464: @@@ dot1x_auth Fa0/1: auth_connecting -> auth_disconnected
*Mar 8 00:03:22.464: dot1x-sm(Fa0/1): 0xB0000DBA:auth_disconnected_enter called
*Mar 8 00:03:22.464: dot1x-sm(Fa0/1): d43d.7e65.4fc1:auth_disconnected_enter sending canned failure to version 1 supplicant
*Mar 8 00:03:22.464: dot1x-ev(Fa0/1): Sending EAPOL packet to group PAE address
*Mar 8 00:03:22.464: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:22.464: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 8 00:03:22.464: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 8 00:03:22.464: EAPOL pak dump Tx
*Mar 8 00:03:22.464: EAPOL Version: 0x3 type: 0x0 length: 0x0004
*Mar 8 00:03:22.464: EAP code: 0x4 id: 0x5 length: 0x0004
*Mar 8 00:03:22.464: dot1x-packet(Fa0/1): dot1x_auth_txCannedStatus: EAPOL packet sent to client 0xB0000DBA (d43d.7e65.4fc1)
*Mar 8 00:03:22.464: dot1x-sm(Fa0/1): 0xB0000DBA:auth_connecting_disconnected_reAuthMax_action called
*Mar 8 00:03:22.464: dot1x_auth Fa0/1: idle during state auth_disconnected
*Mar 8 00:03:22.464: @@@ dot1x_auth Fa0/1: auth_disconnected -> auth_restart
*Mar 8 00:03:22.464: dot1x-ev(Fa0/1): Sending event (1) to Auth Mgr for d43d.7e65.4fc1
*Mar 8 00:03:22.464: dot1x-ev:Delete auth client (0xB0000DBA) message
*Mar 8 00:03:22.464: dot1x-ev:Auth client ctx destroyed
*Mar 8 00:03:22.674: AAA/BIND(000001C8): Bind i/f
*Mar 8 00:03:22.674: dot1x_auth Fa0/1: initial state auth_initialize has enter
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): 0x4A000DBB:auth_initialize_enter called
*Mar 8 00:03:22.674: dot1x_auth Fa0/1: during state auth_initialize, got event 0(cfg_auto)
*Mar 8 00:03:22.674: @@@ dot1x_auth Fa0/1: auth_initialize -> auth_disconnected
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): 0x4A000DBB:auth_disconnected_enter called
*Mar 8 00:03:22.674: dot1x_auth Fa0/1: idle during state auth_disconnected
*Mar 8 00:03:22.674: @@@ dot1x_auth Fa0/1: auth_disconnected -> auth_restart
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): 0x4A000DBB:auth_restart_enter called
*Mar 8 00:03:22.674: dot1x-ev(Fa0/1): Sending create new context event to EAP for 0x4A000DBB (0000.0000.0000)
*Mar 8 00:03:22.674: dot1x_auth_bend Fa0/1: initial state auth_bend_initialize has enter
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): 0x4A000DBB:auth_bend_initialize_enter called
*Mar 8 00:03:22.674: dot1x_auth_bend Fa0/1: initial state auth_bend_initialize has idle
*Mar 8 00:03:22.674: dot1x_auth_bend Fa0/1: during state auth_bend_initialize, got event 16383(idle)
*Mar 8 00:03:22.674: @@@ dot1x_auth_bend Fa0/1: auth_bend_initialize -> auth_bend_idle
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): 0x4A000DBB:auth_bend_idle_enter called
*Mar 8 00:03:22.674: dot1x-ev(Fa0/1): Created a client entry (0x4A000DBB)
*Mar 8 00:03:22.674: dot1x-ev(Fa0/1): Dot1x authentication started for 0x4A000DBB (0000.0000.0000)
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): Posting !EAP_RESTART on Client 0x4A000DBB
*Mar 8 00:03:22.674: dot1x_auth Fa0/1: during state auth_restart, got event 6(no_eapRestart)
*Mar 8 00:03:22.674: @@@ dot1x_auth Fa0/1: auth_restart -> auth_connecting
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): 0x4A000DBB:auth_connecting_enter called
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): 0x4A000DBB:auth_restart_connecting_action called
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): Posting RX_REQ on Client 0x4A000DBB
*Mar 8 00:03:22.674: dot1x_auth Fa0/1: during state auth_connecting, got event 10(eapReq_no_reAuthMax)
*Mar 8 00:03:22.674: @@@ dot1x_auth Fa0/1: auth_connecting -> auth_authenticating
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): 0x4A000DBB:auth_authenticating_enter called
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): 0x4A000DBB:auth_connecting_authenticating_action called
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): Posting AUTH_START for 0x4A000DBB
*Mar 8 00:03:22.674: dot1x_auth_bend Fa0/1: during state auth_bend_idle, got event 4(eapReq_authStart)
*Mar 8 00:03:22.674: @@@ dot1x_auth_bend Fa0/1: auth_bend_idle -> auth_bend_request
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): 0x4A000DBB:auth_bend_request_enter called
*Mar 8 00:03:22.674: dot1x-ev(Fa0/1): Sending EAPOL packet to group PAE address
*Mar 8 00:03:22.674: dot1x-ev(Fa0/1): Role determination not required
Malleswaram_2960#
*Mar 8 00:03:22.674: dot1x-registry:registry:dot1x_ether_macaddr called
*Mar 8 00:03:22.674: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 8 00:03:22.674: EAPOL pak dump Tx
*Mar 8 00:03:22.674: EAPOL Version: 0x3 type: 0x0 length: 0x0005
*Mar 8 00:03:22.674: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
*Mar 8 00:03:22.674: dot1x-packet(Fa0/1): EAPOL packet sent to client 0x4A000DBB (0000.0000.0000)
*Mar 8 00:03:22.674: dot1x-sm(Fa0/1): 0x4A000DBB:auth_bend_idle_request_action called
*Mar 8 00:03:22.791: dot1x-ev(Fa0/1): New client notification from AuthMgr for 0x4A000DBB - d43d.7e65.4fc1
*Mar 8 00:03:22.791: %AUTHMGR-5-START: Starting 'dot1x' for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
Malleswaram_2960#
*Mar 8 00:03:25.761: dot1x-sm(Fa0/1): Posting EAP_REQ for 0x4A000DBB
*Mar 8 00:03:25.761: dot1x_auth_bend Fa0/1: during state auth_bend_request, got event 7(eapReq)
*Mar 8 00:03:25.761: @@@ dot1x_auth_bend Fa0/1: auth_bend_request -> auth_bend_request
*Mar 8 00:03:25.761: dot1x-sm(Fa0/1): 0x4A000DBB:auth_bend_request_request_action called
*Mar 8 00:03:25.761: dot1x-sm(Fa0/1): 0x4A000DBB:auth_bend_request_enter called
*Mar 8 00:03:25.761: dot1x-ev(Fa0/1): Sending EAPOL packet to group PAE address
*Mar 8 00:03:25.761: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:25.761: dot1x-registry:registry:dot1x_ether_macaddr called
Malleswaram_2960#n
*Mar 8 00:03:25.761: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 8 00:03:25.761: EAPOL pak dump Tx
*Mar 8 00:03:25.761: EAPOL Version: 0x3 type: 0x0 length: 0x0005
*Mar 8 00:03:25.761: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
*Mar 8 00:03:25.761: dot1x-packet(Fa0/1): EAPOL packet sent to client 0x4A000DBB (d43d.7e65.4fc1)
Malleswaram_2960#no debu
Malleswaram_2960#no debug
*Mar 8 00:03:28.848: dot1x-sm(Fa0/1): Posting EAP_REQ for 0x4A000DBB
*Mar 8 00:03:28.848: dot1x_auth_bend Fa0/1: during state auth_bend_request, got event 7(eapReq)
*Mar 8 00:03:28.848: @@@ dot1x_auth_bend Fa0/1: auth_bend_request -> auth_bend_request
*Mar 8 00:03:28.848: dot1x-sm(Fa0/1): 0x4A000DBB:auth_bend_request_request_action called
*Mar 8 00:03:28.848: dot1x-sm(Fa0/1): 0x4A000DBB:auth_bend_request_enter called
*Mar 8 00:03:28.848: dot1x-ev(Fa0/1): Sending EAPOL packet to group PAE address
*Mar 8 00:03:28.848: dot1x-ev(Fa0/1): Role determination not required
*Mar 8 00:03:28.848: dot1x-registry:registry:dot1x_ether_macaddr called
Malleswaram_2960#no debug all
*Mar 8 00:03:28.848: dot1x-ev(Fa0/1): Sending out EAPOL packet
*Mar 8 00:03:28.848: EAPOL pak dump Tx
*Mar 8 00:03:28.848: EAPOL Version: 0x3 type: 0x0 length: 0x0005
*Mar 8 00:03:28.848: EAP code: 0x1 id: 0x1 length: 0x0005 type: 0x1
*Mar 8 00:03:28.848: dot1x-packet(Fa0/1): EAPOL packet sent to client 0x4A000DBB (d43d.7e65.4fc1)
Malleswaram_2960#no debug all
All possible debugging has been turned off
Malleswaram_2960#
*Mar 8 00:03:31.180: AAA: parse name=tty1 idb type=-1 tty=-1
*Mar 8 00:03:31.180: AAA: name=tty1 flags=0x11 type=5 shelf=0 slot=0 adapter=0 port=1 channel=0
*Mar 8 00:03:31.180: AAA/MEMORY: create_user (0x21D1684) user='jameela' ruser='Malleswaram_2960' ds0=0 port='tty1' rem_addr='10.26.20.5' authen_type=ASCII service=NONE priv=15 initial_task_id='0', vrf= (id=0) key=C9A1F1D1
*Mar 8 00:03:31.389: TAC+: (-1901802859): received author response status = PASS_ADD
*Mar 8 00:03:31.389: AAA/MEMORY: free_user (0x21D1684) user='jameela' ruser='Malleswaram_2960' port='tty1' rem_addr='10.26.20.5' authen_type=ASCII service=NONE priv=15
*Mar 8 00:03:31.935: %DOT1X-5-FAIL: Authentication failed for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID
*Mar 8 00:03:31.935: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
*Mar 8 00:03:31.935: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
*Mar 8 00:03:31.935: %AUTHMGR-7-NOMOREMETHODS: Exhausted all authentication methods for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
Malleswaram_2960#
*Mar 8 00:03:31.935: %AUTHMGR-5-FAIL: Authorization failed for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
Malleswaram_2960#no deb
Malleswaram_2960#no debug al
Malleswaram_2960#no debug all
All possible debugging has been turned off
Malleswaram_2960#
*Mar 8 00:04:32.677: %AUTHMGR-5-START: Starting 'dot1x' for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
Malleswaram_2960#
*Mar 8 00:04:41.938: %DOT1X-5-FAIL: Authentication failed for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID
*Mar 8 00:04:41.938: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
*Mar 8 00:04:41.938: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
*Mar 8 00:04:41.938: %AUTHMGR-7-NOMOREMETHODS: Exhausted all authentication methods for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
Malleswaram_2960#
*Mar 8 00:04:41.938: %AUTHMGR-5-FAIL: Authorization failed for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
Malleswaram_2960#
*Mar 8 00:05:42.654: %AUTHMGR-5-START: Starting 'dot1x' for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
Malleswaram_2960#
*Mar 8 00:05:51.915: %DOT1X-5-FAIL: Authentication failed for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID
*Mar 8 00:05:51.915: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'dot1x' for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
*Mar 8 00:05:51.915: %AUTHMGR-7-FAILOVER: Failing over from 'dot1x' for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
*Mar 8 00:05:51.915: %AUTHMGR-7-NOMOREMETHODS: Exhausted all authentication methods for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
Malleswaram_2960#
*Mar 8 00:05:51.915: %AUTHMGR-5-FAIL: Authorization failed for client (d43d.7e65.4fc1) on Interface Fa0/1 AuditSessionID 0A1AED0B000000EF240F9BC3
Pls dont worry about day and time. -
RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNORE
Dear Team,
I have faced an issue with dot1x mab authorization between cisco switch 3750 and ISE 1.1. I have cisco IP phone connected on port # gig1/0/1 to authenticated through MAB with cisco ISE
int gig 1/0/1
switchport mode access
switchport access vlan 9
switchport voice vlan 410
authentication order mab dot1x
authentication priority dot1x mab
spanning-tree portfast
authentication host-mode multi-domain
authentication port-control auto
dot1x pae authenticator
mab
dot1x timeout tx-period 3
dot1x max-reauth-req 2
authentication periodic
authentication timer reauthenticate server
I can get authentication successfuly but can't download the authorization profile on the gig1/0/1 port since I can see that everything seems fine from the ISE side. the phone is authenticated and authorized fine. so, I debug the dot1x & radius flows from the switch side and get this result.
RADIUS/ENCODE(00000043):Orig. component type = Dot1X
RADIUS(00000043): Config NAS IP: 1.1.1.2
RADIUS(00000043): Config NAS IPv6: ::
RADIUS/ENCODE(00000043): acct_session_id: 57
RADIUS(00000043): sending
RADIUS(00000043): Sending a IPv4 Radius Packet
RADIUS(00000043): Send Access-Request to 1.1.1.1:1812 id 1645/72, len 261
RADIUS: authenticator 82 94 D8 85 E9 E0 CF 71 - 03 FE C5 BA 76 EC 76 C4
RADIUS: User-Name [1] 14 "00152bd20c19"
RADIUS: User-Password [2] 18 *
RADIUS: Service-Type [6] 6 Call Check [10]
RADIUS: Vendor, Cisco [26] 31
RADIUS: Cisco AVpair [1] 25 "service-type=Call Check"
RADIUS: Framed-MTU [12] 6 1500
RADIUS: Called-Station-Id [30] 19 "30-F7-0D-CD-5F-01"
RADIUS: Calling-Station-Id [31] 19 "00-15-2B-D2-0C-19"
RADIUS: Message-Authenticato[80] 18
RADIUS: 90 B9 61 65 CC A6 B2 89 BC C8 3D DC D4 14 03 C5 [ ae=]
RADIUS: EAP-Key-Name [102] 2 *
RADIUS: Vendor, Cisco [26] 49
RADIUS: Cisco AVpair [1] 43 "audit-session-id=C0A8424200000036001B2AAE"
RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
RADIUS: NAS-Port [5] 6 50101
RADIUS: NAS-Port-Id [87] 22 "GigabitEthernet1/0/1"
RADIUS: Called-Station-Id [30] 19 "30-F7-0D-CD-5F-01"
RADIUS: NAS-IP-Address [4] 6 1.1.1.2
RADIUS(00000043): Started 5 sec timeout
RADIUS: Received from id 1645/72 1.1.1.1:1812, Access-Accept, len 297
RADIUS: authenticator D5 2C 29 3B AC C8 A7 2F - A4 75 45 F5 51 6D 4F A8
RADIUS: User-Name [1] 19 "00-15-2B-D2-0C-19"
RADIUS: State [24] 40
RADIUS: 52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 43 30 [ReauthSession:C0]
RADIUS: 41 38 34 32 34 32 30 30 30 30 30 30 33 36 30 30 [A842420000003600]
RADIUS: 31 42 32 41 41 45 [ 1B2AAE]
RADIUS: Class [25] 50
RADIUS: 43 41 43 53 3A 43 30 41 38 34 32 34 32 30 30 30 [CACS:C0A84242000]
RADIUS: 30 30 30 33 36 30 30 31 42 32 41 41 45 3A 69 73 [00036001B2AAE:is]
RADIUS: 65 33 2F 31 35 30 33 30 36 35 37 38 2F 33 38 36 [ e3/150306578/386]
RADIUS: Termination-Action [29] 6 1
RADIUS: Message-Authenticato[80] 18
RADIUS: 09 17 84 AB 27 8E B4 E0 F4 A6 93 EE 19 2A A6 34 [ '*4]
RADIUS: Vendor, Cisco [26] 34
RADIUS: Cisco AVpair [1] 28 "device-traffic-class=voice"
RADIUS: Vendor, Cisco [26] 75
RADIUS: Cisco AVpair [1] 69 "ACS:CiscoSecure-Defined-ACL=#ACSACL#-IP-PERMIT_ALL_TRAFFIC-4fe7f797"
RADIUS: Vendor, Cisco [26] 35
RADIUS: Cisco AVpair [1] 29 "profile-name=Cisco-IP-Phone"i
RADIUS(00000043): Received from id 1645/72
RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNORE
%MAB-5-SUCCESS: Authentication successful for client (0015.2bd2.0c19) on Interface Gi1/0/1 AuditSessionID C0A8424200000036001B2AAE
%AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (0015.2bd2.0c19) on Interface Gi1/0/1 AuditSessionID C0A8424200000036001B2AAE
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE
RADIUS/ENCODE(00000000):Orig. component type = Invalid
so, I notice two things :-
1-" RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNORE " on the radius attribute since I beleive that I configure the radius vsa attribute fine as shows
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius
aaa accounting system default start-stop group radius
aaa session-id common
aaa accounting update periodic 5
aaa server radius dynamic-author
client 1.1.1.1 server-key 0 cisco
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server host 1.1.1.1 auth-port 1812 acct-port 1813 key cisco
radius-server vsa send accounting
radius-server vsa send authentication
2- "%DOT1X_SWITCH-5-ERR_VLAN_RSPAN:" since I didn't have any configuration related to RSPAN.
so, anybody have any idea to fix this issue.
Regards
BaselIt is not the ACL it is ignoring, it's the profile-name, which it should, because it has nothing to use that for. However, you should look into VLAN 410, to check and see if you have any config relating to that vlan, the only actual error i see in your logs is the one regarding assigning vlan 410. Could you please post you entire switch config, see we can see what else you might have configured.
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298
%DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN 410 to 802.1x port GigabitEthernet1/0/1. 802.1x is incompatible with RSPAN AuditSessionID C0A8424200000036001B2AAE - See more at: https://supportforums.cisco.com/message/3863298#3863298 -
DACL does not get downloaded to Cisco Switch from ISE
Hello,
I have a cisco switch with ios: c3550-ipbasek9-mz.122-44.SE6.bin
I am trying to push dACL fro my ISE device into the switch, but it is not getting applied to switch. dynamic vlan assignment workds fine, but dACL doesnot apply
Any instruction plz?Hi Jatin,
ISE is properly configured for dACL, i think there is some compatibility issue on cisco switch ios.
following is the debug output>>
06:36:43: dot1x-packet:Received an EAP packet on interface FastEthernet0/11
06:36:43: EAPOL pak dump rx
06:36:43: EAPOL Version: 0x1 type: 0x0 length: 0x0006
06:36:43: dot1x-packet:Received an EAP packet on the FastEthernet0/11 from mac 0019.b981.e812
06:36:43: dot1x-sm:Posting EAPOL_EAP on Client=1D68028
06:36:43: dot1x_auth_bend Fa0/11: during state auth_bend_request, got event 6(eapolEap)
06:36:43: @@@ dot1x_auth_bend Fa0/11: auth_bend_request -> auth_bend_response
06:36:43: dot1x-sm:Fa0/11:0019.b981.e812:auth_bend_response_enter called
06:36:43: dot1x-ev:dot1x_sendRespToServer: Response sent to the server from 0019.b981.e812
06:36:43: dot1x-sm:Fa0/11:0019.b981.e812:auth_bend_request_response_action called
06:36:43: RADIUS/ENCODE(00000049):Orig. component type = DOT1X
06:36:43: RADIUS(00000049): Config NAS IP: 192.168.2.250
06:36:43: RADIUS/ENCODE(00000049): acct_session_id: 73
06:36:43: RADIUS(00000049): sending
06:36:43: RADIUS(00000049): Send Access-Request to 192.168.2.231:1812 id 1645/99, len 267
06:36:43: RADIUS: authenticator 5B 61 1D 64 D3 D5 9F AD - 23 E0 11 11 B3 C3 5C 81
06:36:43: RADIUS: User-Name [1] 6 "test"
06:36:43: RADIUS: Service-Type [6] 6 Framed [2]
06:36:43: RADIUS: Framed-MTU [12] 6 1500
06:36:43: RADIUS: Called-Station-Id [30] 19 "00-11-5C-6E-5E-0B"
06:36:43: RADIUS: Calling-Station-Id [31] 19 "00-19-B9-81-E8-12"
06:36:43: RADIUS: EAP-Message [79] 8
06:36:43: RADIUS: 02 7A 00 06 0D 00 [ z]
06:36:43: RADIUS: Message-Authenticato[80] 18
06:36:43: RADIUS: A6 AB 5A CA ED B8 B4 1E 36 00 9D AB 1A F6 B9 E0 [ Z6]
06:36:43: RADIUS: Vendor, Cisco [26] 49
06:36:43: RADIUS: Cisco AVpair [1] 43 "audit-session-id=C0A802FA0000006F016B36D8"
06:36:43: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
06:36:43: RADIUS: NAS-Port [5] 6 50011
06:36:43: RADIUS: NAS-Port-Id [87] 18 "FastEthernet0/11"
06:36:43: RADIUS: State [24] 80
06:36:43: RADIUS: 33 37 43 50 4D 53 65 73 73 69 6F 6E 49 44 3D 43 [37CPMSessionID=C]
06:36:43: RADIUS: 30 41 38 30 32 46 41 30 30 30 30 30 30 36 46 30 [0A802FA0000006F0]
06:36:43: RADIUS: 31 36 42 33 36 44 38 3B 33 35 53 65 73 73 69 6F [16B36D8;35Sessio]
06:36:43: RADIUS: 6E 49 44 3D 69 73 65 2D 73 65 72 76 65 72 2D 31 [nID=ise-server-1]
06:36:43: RADIUS: 2F 31 37 31 30 32 35 39 38 38 2F 32 34 3B [ /171025988/24;]
06:36:43: RADIUS: NAS-IP-Address [4] 6 192.168.2.250
06:36:43: %LINK-3-UPDOWN: Interface FastEthernet0/11, changed state to up
06:36:43: RADIUS: Received from id 1645/99 192.168.2.231:1812, Access-Challenge, len 1134
06:36:43: RADIUS: authenticator 78 36 A3 38 30 1C F0 7A - 19 83 93 81 B4 6B FF 9E
06:36:43: RADIUS: State [24] 80
06:36:43: RADIUS: 33 37 43 50 4D 53 65 73 73 69 6F 6E 49 44 3D 43 [37CPMSessionID=C]
06:36:43: RADIUS: 30 41 38 30 32 46 41 30 30 30 30 30 30 36 46 30 [0A802FA0000006F0]
06:36:43: RADIUS: 31 36 42 33 36 44 38 3B 33 35 53 65 73 73 69 6F [16B36D8;35Sessio]
06:36:43: RADIUS: 6E 49 44 3D 69 73 65 2D 73 65 72 76 65 72 2D 31 [nID=ise-server-1]
06:36:43: RADIUS: 2F 31 37 31 30 32 35 39 38 38 2F 32 34 3B [ /171025988/24;]
06:36:43: RADIUS: EAP-Message [79] 255
06:36:43: RADIUS: 4D 5D 13 47 FC 46 16 EE 62 76 40 09 77 48 31 B6 01 6B 5E 52 33 56 A2 1E 34 [M]GFbv@wH1k^R3V4]
06:36:43: RADIUS: 02 32 39 FA 4D CA 79 18 4A 42 A2 4E 5C BD AE 29 D2 3D D1 5A FC C2 ED 3E E5 FB C6 B8 D8 DE A8 75 EB 3A A5 7D 02 03 01 00 01 A3 81 CD 30 [29MyJBN\)=Z>u:}0]
06:36:43: RADIUS: 81 CA 30 0B 06 03 55 1D 0F 04 04 03 02 01 86 30 0F 06 03 55 1D 13 01 01 FF 04 05 30 03 01 01 FF 30 1D 06 03 55 1D 0E 04 16 04 14 C4 56 80 A7 C9 18 50 92 EE CC 91 D4 E1 EC DB AD E7 1E 70 A8 30 79 06 03 55 1D 1F 04 72 30 70 [0U0U00UVPp0yUr0p]
06:36:43: RADIUS: 30 6E A0 6C A0 6A 86 32 68 74 74 70 3A 2F 2F 73 79 73 6C [0nlj2http://sysl]
06:36:43: RADIUS: 6F 67 2D 73 65 72 76 65 72 2F 43 65 72 74 45 6E [og-server/CertEn]
06:36:43: RADIUS: 72 6F 6C 6C 2F 46 4D 46 42 5F 54 72 75 73 74 65 [roll/FMFB_Truste]
06:36:43: RADIUS: 64 43 41 2E 63 72 6C 86 34 66 69 6C 65 3A 2F 2F 5C [dCA.crl4file://\]
06:36:43: RADIUS: 5C 73 79 73 6C 6F 67 2D 73 65 72 76 65 72 5C 43 [\syslog-server\C]
06:36:43: RADIUS: 65 72 74 45 6E 72 6F 6C 6C 5C 46 4D 46 42 5F 54 [ertEnroll\FMFB_T]
06:36:43: RADIUS: 72 75 73 74 65 64 43 41 2E [ rustedCA.]
06:36:43: RADIUS: EAP-Message [79] 251
06:36:43: RADIUS: 63 72 6C 30 10 06 09 2B 06 01 04 01 82 37 15 01 04 03 02 01 00 30 0D 06 09 2A 86 48 86 F7 0D 01 01 05 05 00 03 82 01 01 00 63 BA F8 CE D5 8B 0E 94 77 AE 86 6C 37 AB 2F 36 9A B2 85 D5 4A [crl0+70*Hcwl7/6J]
06:36:43: RADIUS: 74 8C 33 F5 93 06 A6 57 8D 39 56 8F 02 08 97 CB C6 08 70 8C 22 1E 5D 1F A8 26 6D 60 1F 05 62 D1 24 AB 03 8C 41 F8 1C F1 F8 C2 87 8B 97 02 71 FC 6A [t3W9Vp"]&m`b$Aqj]
06:36:43: RADIUS: EB 12 FC DD 8C 5C 9C 2D AF D2 C4 1C 18 1B 40 BE 78 B0 54 55 59 89 03 1B B7 FB 91 85 EE CA C0 18 1C 78 5D 4D BA FA 9E 44 D3 45 53 A3 BE 46 8A FB 81 BD F1 4C B3 3B [\-@xTUYx]MDESFL;]
06:36:43: RADIUS: D6 66 7E 5B 79 9F 83 53 5E 49 92 B5 7F E5 1A E2 86 8C 83 96 7D 75 A5 1D 08 4E 32 C3 5E EC BF 28 53 EC 53 8A C3 E0 36 [f~[yS^I}uN2^(SS6]
06:36:43: RADIUS: 82 EE AA 0D 38 3E BA 9C 1D D9 24 BD 48 A6 EE 44 BD 95 68 85 CA 8C 44 F8 E8 A2 FB 94 BC 6F 7C F2 06 91 6C A0 A6 BB 7B 7F 56 BD 15 32 A4 [ 8>$HDhDo|l{V2]
06:36:43: RADIUS: Message-Authenticato[80] 18
06:36:43: RADIUS: DD 82 F7 10 3F C7 B5 62 9B 2A BB 24 16 A7 59 33 [ ?b*$Y3]
06:36:44: RADIUS(00000049): Received from id 1645/99
06:36:44: RADIUS/DECODE: EAP-Message fragments, 253+253+253+249, total 1008 bytes
06:36:44: dot1x-packet:Received an EAP request packet from EAP for mac 0019.b981.e812
06:36:44: dot1x-sm:Posting EAP_REQ on Client=1D68028
06:36:44: dot1x_auth_bend Fa0/11: during state auth_bend_response, got event 7(eapReq)
06:36:44: @@@ dot1x_auth_bend Fa0/11: auth_bend_response -> auth_bend_request
06:36:44: dot1x-sm:Fa0/11:0019.b981.e812:auth_bend_response_exit called
06:36:44: dot1x-sm:Fa0/11:0019.b981.e812:auth_bend_request_enter called
06:36:44: dot1x-packet:dot1x_mgr_send_eapol :EAP code: 0x1 id: 0x7B length: 0x03F0 type: 0xD data: @Cfui[ab2,Jt1){ 2]g&GZ1pIbu;+Ga;iF"jy#
oohuV.aFZ4_|
P0`At )B
06:36:44: dot1x-ev:FastEthernet0/11:Sending EAPOL packet to group PAE address
06:36:44: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/11.
06:36:44: RADIUS: Message-Authenticato[80] 18
06:36:44: RADIUS: F5 B0 56 D3 C6 87 BD 10 6E C7 4A 72 5B 5C 60 C5 [ VnJr[\`]
06:36:44: RADIUS: Vendor, Cisco [26] 49
06:36:44: RADIUS: Cisco AVpair [1] 43 "audit-session-id=C0A802FA0000006F016B36D8"
06:36:44: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
06:36:44: RADIUS: NAS-Port [5] 6 50011
06:36:44: RADIUS: NAS-Port-Id [87] 18 "FastEthernet0/11"
06:36:44: RADIUS: State [24] 80
06:36:44: RADIUS: 33 37 43 50 4D 53 65 73 73 69 6F 6E 49 44 3D 43 [37CPMSessionID=C]
06:36:44: RADIUS: 30 41 38 30 32 46 41 30 30 30 30 30 30 36 46 30 [0A802FA0000006F0]
06:36:45: dot1x-ev:FastEthernet0/11:Sending EAPOL packet to group PAE address
06:36:45: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/11.
06:36:45: dot1x-registry:registry:dot1x_ether_macaddr called
06:36:45: dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet0/11
06:36:45: EAPOL pak dump Tx
06:36:45: EAPOL Version: 0x2 type: 0x0 length: 0x0039
06:36:45: EAP code: 0x1 id: 0x7E length: 0x0039 type: 0xD
06:36:45: dot1x-packet:dot1x_txReq: EAPOL packet sent to client (0019.b981.e812)
06:36:45: dot1x-sm:Fa0/11:0019.b981.e812:auth_bend_response_request_action called
06:36:46: dot1x-ev:dot1x_mgr_pre_process_eapol_pak: Role determination not required on FastEthernet0/11.
06:36:46: dot1x-packet:dot1x_mgr_process_eapol_pak: queuing an EAPOL pkt on Authenticator Q
06:36:46: dot1x-ev:Enqueued the eapol packet to the global authenticator queue
06:36:46: EAPOL pak dump rx
06:36:46: EAPOL Version: 0x1 type: 0x0 length: 0x0006
06:36:46: dot1x-ev:
dot1x_auth_queue_event: Int Fa0/11 CODE= 2,TYPE= 13,LEN= 6
06:36:46: dot1x-packet:Received an EAPOL frame on interface FastEthernet0/11
06:36:46: dot1x-ev:Received pkt saddr =0019.b981.e812 , daddr = 0180.c200.0003,
pae-ether-type = 888e.0100.0006
06:36:46: dot1x-ev:dot1x_auth_process_eapol: EAPOL flag status of the port Fa0/11 is TRUE -
Cisco-assign-ip-pool RADIUS VSA is an integer?
Hi all,
I'm trying to configure IP pool selection by RADIUS on ACS 5-3-0-40-7.
So, I went to configuring the cisco-assign-ip-pool (Cisco VSA 218) attribute within some test authorization profile but discovered that cisco-assign-ip-pool is an integer (?!) and (therefore) accepts digits only.
As far as I can remember, we used to put pool *names* within ip:addr-pool (something along those lines: cisco-avpair = "ip:addr-pool=test-pool-1").
So how should we configure the values for this attribute in ACS 5?If your NAS is "RADIUS (Cisco IOS/PIX)" it will use a Cisco-AVPair attribute with "ip:addr-pool=poolname" inside it.
If your NAS is just about any other RADIUS type, it will use attribute 88, Framed-Pool.
Use the dictionary Radius-Cisco and then select cisco av-pair in the radius authorization profile.
After that configure:
ip:addr-pool=poolname
The pool should be defined on the device itself like ASA. The ACS will only push the name of it.
Jatin Katyal
- Do rate helpful posts - -
IPv6 prefix delegation with AVPair ipv6:delegated-prefix
Dear all
I have a LNS running c7200-adventerprisek9-mz.124-24.T4.bin.
I am trying to delegate IPv6 prefixes to vpdn users as described in
http://www.cisco.com/en/US/customer/prod/collateral/iosswrel/ps6537/ps6553/whitepaper_c11-602131.html#wp9000270
From this whitepaper: "When the delegating provider edge router supports RFC 4818, only one user profile is stored for the RADIUS server. In addition the RADIUS server may be configured with a DNS server per user, which overwrites the providers edge router's default DNS server address configured in the DHCP pool"
Our Freeradius has the following user entry according to the mentioned whitepaper:
user@foobar Auth-Type = Local, Password == "foo"
Service-Type = Framed-User,
Framed-Protocol = "PPP",
Framed-IP-Address = "10.0.0.1",
Framed-IP-Netmask = "255.255.255.255",
Framed-MTU = "1492",
Framed-Compression = "Van-Jacobson-TCP-IP",
Cisco-AVPair = "ipv6:prefix#1=201:DB8:F1:0::/64",
Cisco-AVPair += "ipv6:delegated-prefix=201:DB8:AAAA::/48",
Cisco-AVPair += "lcp:interface-config=mtu 1460"
If I try to connect this user I get the PPP-Link established with prefix 201:DB8:F1:0::/64 as expected. But instead of providing the delegated prefix from the AVPair the router queries the radius server again for the user user@foobar-dhcpv6pd which I have not configured since I assume that this router "supports RFC 4818", right?
So why does it as for user@foobar-dhcpv6pd ?
Thanks for any hint,
GrischaHi,
RFC4818 is supported starting with 15.1(1)T or later. 151-2.T2a seems to have an issue though.
HTH
Laurent. -
I have setup Prime to use Radius, i can see authenication request to my radius but i keep getting user name and password is incorrect. I have 100's of switches authenticating to this radius server and everything works fine. I have loooked for logs in Prime for radius errors but I can't find anything.
any suggestions?What's getting confused is the difference between AUTHENTICation (who are you?) and AUTHORIZation (what are you allowed to do?). Clearly FreeRADIUS is saying that the AUTHENTICation passed--the credentials were correct--but it's not passing the correct AUTHORIZation information back. Your IOS devices may bow to "shell:priv-lvl=15", but Prime Infrastructure isn't an IOS device, and has no idea what to do with that. As well, the login failure mechanism isn't complicated enough yet to reflect to a user the difference between a failed AUTHENTICation or a failed AUTHORIZation.
There's a sample configuration document about NCS here in the Support Forum:
Freeradius for NCS config
All the correct AUTHORIZation attributes--the lines 'cisco-avpair += "NCS:task0=View Alerts and Events",'--from that sample are what you're missing. The attributes are listed under Administration > Users, Roles & AAA > User Groups > select a group > Task List hotlink for each group of user. Remember that there HAS to be a VIRTUAL-DOMAIN attribute, a ROLE attribute and *ALL* of the TASK attributes associated with that group. The attributes are going to be different from NCS to Prime Infrastructure, and tend to be different from version to version of each product, so you have to use the ones that are listed in whatever version of whatever product you're using right now.
Once you have FreeRADIUS configured to send the right attributes, to diagnose this full on, go to Administration > Logging, and set the logging level to Trace for the modules AAA, GUI and System, and click Save. Then change your AAA settings and make a login attempt, allowing it to fail. When it does, please return to Administration > Logging, and click the Download button to retrieve the logs.zip file. Look in the ncs-0-0.log file and you'll see the transaction to FreeRADIUS, what Prime Infrastructure has to say to it, what FreeRADIUS says back, and what Prime Infrastructure does with the responses. -
Cisco - Privilege level is always 15
I'm using RADIUS for the AAA process.
When I was running IOS 12.2 on routers everything was fine, but after upgrading to IOS Version 12.4(12) users gets always priv-lvl 15 regardless
what I set in RADIUS profile for the user.
I don't understand why router is processing CISCO-AV pair priv-lvl=y two times. And, why in the newest version the CISCO-AV pair priv-lvl=(value defined in RADIUS) came first?
IOS 12.2
Aug 19 15:09:17.926: AAA/AUTHOR/EXEC(0000059A): processing AV priv-lvl=15
Aug 19 15:09:17.926: AAA/AUTHOR/EXEC(0000059A): processing AV priv-lvl=1
Aug 19 15:09:17.926: AAA/AUTHOR/EXEC(0000059A): Authorization successful
IOS 12.4(12)
Aug 19 15:09:17.926: AAA/AUTHOR/EXEC(0000059A): processing AV priv-lvl=1
Aug 19 15:09:17.926: AAA/AUTHOR/EXEC(0000059A): processing AV priv-lvl=15
Aug 19 15:09:17.926: AAA/AUTHOR/EXEC(0000059A): processing AV service-type=6
Aug 19 15:09:17.926: AAA/AUTHOR/EXEC(0000059A): Authorization successful
Thanks,
VAdebugging:
- radius
- aaa authentication
- aaa authorization
Aug 30 17:03:54.986: AAA/BIND(000005CE): Bind i/f
Aug 30 17:03:54.986: AAA/AUTHEN/LOGIN (000005CE): Pick method list 'default'
Aug 30 17:03:54.986: RADIUS/ENCODE(000005CE): ask "Username: "
Aug 30 17:03:54.986: RADIUS/ENCODE(000005CE): send packet; GET_USER
Aug 30 17:03:57.838: RADIUS/ENCODE(000005CE): ask "Password: "
Aug 30 17:03:57.842: RADIUS/ENCODE(000005CE): send packet; GET_PASSWORD
Aug 30 17:04:01.635: RADIUS/ENCODE(000005CE):Orig. component type = EXEC
Aug 30 17:04:01.635: RADIUS: AAA Unsupported Attr: interface [157] 6
Aug 30 17:04:01.635: RADIUS: 74 74 79 34 [tty4]
Aug 30 17:04:01.635: RADIUS/ENCODE(000005CE): dropping service type, "radius-server attribute 6 on-for-login-auth" is off
Aug 30 17:04:01.635: RADIUS(000005CE): Config NAS IP: xxx.xxx.xxx.xxx
Aug 30 17:04:01.635: RADIUS/ENCODE(000005CE): acct_session_id: 1486
Aug 30 17:04:01.635: RADIUS(000005CE): sending
Aug 30 17:04:01.635: RADIUS(000005CE): Send Access-Request to xxx.xxx.xxx.xxx:1812 id 1645/241, len 87
Aug 30 17:04:01.635: RADIUS: authenticator E7 CE FD C8 3D 37 01 CC - 2E A4 D5 BD 8E 27 F4 43
Aug 30 17:04:01.635: RADIUS: User-Name [1] 8 "test"
Aug 30 17:04:01.635: RADIUS: User-Password [2] 18 *
Aug 30 17:04:01.635: RADIUS: NAS-Port [5] 6 451
Aug 30 17:04:01.635: RADIUS: NAS-Port-Id [87] 8 "tty451"
Aug 30 17:04:01.635: RADIUS: NAS-Port-Type [61] 6 Virtual [5]
Aug 30 17:04:01.635: RADIUS: Calling-Station-Id [31] 15 "xxx.xxx.xxx.xxx"
Aug 30 17:04:01.635: RADIUS: NAS-IP-Address [4] 6 xxx.xxx.xxx.xxx
Aug 30 17:04:01.647: RADIUS: Received from id 1645/241 xxx.xxx.xxx.xxx:1812, Access-Accept, len 50
Aug 30 17:04:01.647: RADIUS: authenticator B1 55 52 0D EB 66 01 C2 - 98 E0 7E 17 93 36 0D D2
Aug 30 17:04:01.647: RADIUS: Service-Type [6] 6 Administrative [6]
Aug 30 17:04:01.647: RADIUS: Vendor, Cisco [26] 24
Aug 30 17:04:01.647: RADIUS: Cisco AVpair [1] 18 "shell:priv-lvl=1"
Aug 30 17:04:01.647: RADIUS(000005CE): Received from id 1645/241
Aug 30 17:04:01.647: AAA/AUTHOR/EXEC(000005CE): processing AV priv-lvl=1
Aug 30 17:04:01.647: AAA/AUTHOR/EXEC(000005CE): processing AV priv-lvl=15
Aug 30 17:04:01.647: AAA/AUTHOR/EXEC(000005CE): processing AV service-type=6
Aug 30 17:04:01.647: AAA/AUTHOR/EXEC(000005CE): Authorization successful
Aug 30 17:04:01.647: RADIUS/ENCODE(000005CE):Orig. component type = EXEC
Aug 30 17:04:01.647: RADIUS(000005CE): Config NAS IP: xxx.xxx.xxx.xxx
Aug 30 17:04:01.647: RADIUS(000005CE): sending
Aug 30 17:04:01.647: RADIUS(000005CE): Send Accounting-Request to xxx.xxx.xxx.xxx:1813 id 1646/180, len 103
Aug 30 17:04:01.647: RADIUS: authenticator 68 53 1A 44 F0 5E 12 A5 - 99 6F 21 64 F3 F5 50 31
Aug 30 17:04:01.647: RADIUS: Acct-Session-Id [44] 10 "000005CE"
Aug 30 17:04:01.647: RADIUS: User-Name [1] 8 "test"
Aug 30 17:04:01.647: RADIUS: Acct-Authentic [45] 6 RADIUS [1]
Aug 30 17:04:01.647: RADIUS: Acct-Status-Type [40] 6 Start [1]
Aug 30 17:04:01.647: RADIUS: NAS-Port [5] 6 451
Aug 30 17:04:01.647: RADIUS: NAS-Port-Id [87] 8 "tty451"
Aug 30 17:04:01.647: RADIUS: NAS-Port-Type [61] 6 Virtual [5]
Aug 30 17:04:01.647: RADIUS: Calling-Station-Id [31] 15 "xxx.xxx.xxx.xxx"
Aug 30 17:04:01.647: RADIUS: Service-Type [6] 6 NAS Prompt [7]
Aug 30 17:04:01.647: RADIUS: NAS-IP-Address [4] 6 xxx.xxx.xxx.xxx
Aug 30 17:04:01.647: RADIUS: Acct-Delay-Time [41] 6 0
Aug 30 17:04:01.655: RADIUS: Received from id 1646/180 xxx.xxx.xxx.xxx:1813, Accounting-response, len 20
Aug 30 17:04:01.655: RADIUS: authenticator FE E4 75 AD 9E 1E 35 A9 - 1F 1D 5F B7 AD 4D AC EA
Maybe you are looking for
-
How do I load data from R/3 into /BI0/TCUST_SALES
Hi, There is a SAP supplied characteristic called 0CUST_SALES which has a text table called /BI0/TCUST_SALES. How do go about populating this table from the R/3 system? My version is BW 3.5 Thanks Ram
-
Hi, I know this is a basic question but it's causing me a lot of grief. When I place images on coloured backgrounds, they have white boxes around them. Is the only way to get around this to manipulate the image itself in photoshop? I've tried this bu
-
I have doubt regarding write stmt.
i would like to write like this write: / 'jan',/ 'feb'. however it will come one below the other. if i write stmt exactly where side of jan like month value jan 10 feb 10 is it possible, if yes how.
-
Hi, I've just finished upgrading the MaxDB 7.5 build 32 to MaxDB 7.8.01 build 19. I've already followed the prerequisite of upgrading MaxDB which includes switching the SAP kernel from 640 to 640_EX2, apply SAP note 1002641, 916795. After database up
-
HI everyone. I've just downloaded safari as its available to XP and I'm having troubles.. I have a question/s How do I install plug ins. (I've downloaded 2 cantr remember the names now (Saft and something else) and they downloaded as .dmg files which