BOM for MRP

Hi,
Header Part No.                  Sub Assembly      Component                        Procurement type          SPK
A2N13400                                                                                E
                                           A3F00400                                                             E                                  50
                                                                         B3F00401                               F
A9707900                                                                                E
                                          A3F00400                                                             E                                   50
                                          B3F00401                                                             E                                   50
The above is my BOM structure, the header number part are A2N13400,A9707900 and part number B3F00401 is external procurement for the header part A2N13400 and part number B3F00401is phantom for the header A9707900,Since part number A3F00400 is common for B3F00401 So i cant defined phantom as BOM specific.In erlier ERP they defined as 2 execution plants
so the planned part number plant wise and material wise.But SAP org.structure only one plant.
So please guide me to solve the above issue.
Thanks
P.Srinivasan
Edited by: srinivasan ponnurangam on Aug 19, 2011 2:02 PM

Hi,
Thanks for your reply,Here my requirement is B3F00401 is a component for A3F00400 and A3F00400 is component for the header part number A2N13400 and A9707900.
If i want to define the Phantom for a component B3F00401 means i will define in the haeder A3F00400 only.
But A3F00400 is a component for both header part number A2N13400 and A9707900.So if i switced off the phantom for B3F00401 in a header A3F00400,it will reflect in both the header part A2N13400 and A9707900.So please advice.
Thanks
P.Srinivasan

Similar Messages

How to Generate Diffrent Subcontarcting BOM for Diff. Vendor in MRP

Hi Experts,
Ii have query @ how to generate to Diffrent Subcontracting BOM for Diffrent Vendor for same material in one plant in MRP(Material Requiremnt Planning)
Example: I have X Finished material having 3 Vendor with their Quota Arrangement with 40,30 & 30% quota. This 3 vendors have diffrent BOM,i.e. Alternative BOM. how shall i generate Diifrent PR with Diffrent Subcontracting BOM for according Vendor.
Pls tell me procedure for this.
             Thanks in Advance,
Best Regards,
Dev

Hi Dev,
You can acheive your requirement using Production Version in Material Master MRP 4 view , production versions tab.
Create three different production version as below and assign the same to the Vendor in Vendor Info record Tcode : ME11 / ME12 :
Prod Version                  Alt BOM            For Vendor
01                                       01                 XXXXXX
02                                       02                YYYYY
03                                        03               ZZZZZZ
Assign the Production Version to corresponding vendor in Vendor Info Record.
Goto t.code : ME11 /ME12 put the Vendor (say XXXXXX), Material No , Purchase Org and Plant and seeect the sub contract vendor radio button and press enter.
System will take you to CIR : General Data screen , Select the Purch Org Data 1 and enter the Production version "01" number in the field "Version" save and comeout.
Similarly do it for the other two vendors YYYYYY -02 and ZZZZZZ -03 .
Now if you create a sub contracting P.O system will propose the Alt BOM 1 for the Vendor XXXXXX , Alt BOM 2 for the vendor "YYYYYY" and Alt BOM 3 for the vendor "ZZZZZZ".
Hope this will help you.
regards
radhak mk

BOM Explosion for MRP Area

Dear Expert,
I have doubt regarding BOM explosion for MRP Area. This doubt is triggered when performing MD01, as result I do not find the dependent requirement in MD04 for my FG. I have maintained the BOM through CS61 and MRP area for all component, I understand that only component level system is taking into account MRP area (storage location). FYI before maintaining all components to MRP area, the BOM explosion was successful exploded. Your advice is appreciated.
Best regards,
Mahnansa

Dear,
Please check the Explosion control in Customizing, Transaction OMIW.
Try to explode the BOM in CS11 , CS12 or CS13 if it is working there in curret date then chack the planning file entry in MD21.
You need to convert the planning file entery at MRP area in OM0F.
Also note the dependent requirement is not generated in the corresponding MRP area to which the production storage location in the material master has been not assigned for the data of the MRP area.
Regards,
R.Brahmankar

Materials planning for Recursive BOM during MRP run

SAP Guru's,
We developed an recursive BOM as per production requirments , but we didn't know the impact of this recursive BOM during MRP run.
Pls help us how to recursive bom behaves during MRP.
Thanks & Regards
Suresh Babu.S
Bangalore

Hi,
This message was sent to us by SAP when we were having the same kind of requirement. Hope it will help you too.
Usage Probability
Material requirements planning (MRP) plans the alternative items according to usage probability.
If you use the usage probability to determine the withdrawal posting (strategy 1), the quantities are proposed according to the usage probability. You can change the proposed quantities.
An alternative item is only planned if the usage probability is at least 1%.
If the usage probability is 0%, a dependent requirement with quantity
0 is generated for the material.
The component with the quantity 0 is displayed in the planned order.
If required you can increase the quantity there.
It is possible to plan too much for alternative items, because you can enter usage probabilities that add up to more than 100%.
Hope it will help you.
Regards,
Alok Tiwari

Differ Bom For Production order and Subcontracting

Dear all
Is there any process to defined BOM for Subcontracting & production Order separately and how can we make the Bom For Both case ,If it is possible then how can we choose in the production order for in house production and also for subcontracting for purchase order.
Rgds
Pankaj Agarwal

Hi,
After giving 'X' in the procurment type, maintain quota arrange usage as '4'.
Then use T.code meq1, for creating quotas.
Give the material no. & then give validdity date. Double click the validity date, this will take you to another screen.
Here give the procurment type as internal production, the %quota & the prod version in the 'Version field'& then in the second row choose external procurement & choose sub-contracting in the special procurement field, then enter the %quota & prod version in the 'version' field.
After this in T.code omi4 (for lot-size), check if the lot size you use has got a tick in the splitting quota. If not check this indicator & then run mrp. Based on the quota %, pl order & pur req will be created.
Regards,
Senthilkumar SD

How to maintain alternative material in a BOM for a component.

how to maintain alternative material in a BOM for a component.if stock for existing bom component is less then it should consider other alternative material in the same BOM

HI,
You can maintain alternate material for BOM Component by specifying Alternate Item group as below;
Go to CS03/CS02--> Items-> Select Component and go to details->Basic Data Tab--> General Data
Pls. find more details about Alternate Item group maintainance as below:
Alternative item: group
Consolidation of alternative items within a BOM. Every material in the assembly can be included in the alternative item group.
Use
As soon as you enter an alternative item group, you see an additional dialog box with the following data: ranking order, strategy, usage probability.
You can maintain alternative items in the following situations:
Alternative positions with specific usage probability
These alternative items are incorporated with a specific usage probability. Enter the usage probability for each alternative item in the group, so that:
dependent requirements are determined in requirements planning
dependent requirements are changed to a reservation in the production order
Alternative positions as information
You can enter an alternative item for information purposes. This item would then, for example, only be taken into account in situations involving missing parts.
As there should be neither dependent requirements nor a reservation for this item, enter no usage probability.
Procedure
Enter the same character string to denote the alternative items of an alternative item group.
Enter the same strategy for all alternative items in the alternative item group.
Dependencies
Alternative items are valuated in the following way:
Dependent requirements determination
Requirements planning determines the dependent requirements according to the usage probabilities that have been entered.
If the usage probability is 0%, then no procurement is planned for the item. For information purposes, however, dependent requirements with 0 as quantity are created.
Withdrawal posting
You can control the withdrawal posting for the resevation in the production order in the following way:
Withdrawal according to usage probability (manual change is possible)
Withdrawal if there is 100% availability
(Check ranking order and strategy)
Example: See Strategy for alternative position
Further you can also maintain alternate material if you want to stop using this material at certain time as below:
In material master of the material ,
Go to MRP-4 View----> Under Discongtinued parts specify
Discontinuation Indicator
Eff-out.
Follow-up matl
So system will automatically consider follow up material in BOM as per the settings you have maintained for the material to be replaced.
Hope this helps.
Regards,
Tejas

BOM for sub-contarcting

Hi, a finish product requires 2 sub-assemblies and both the sub-assemblies can be manufactured in-house. ea sub assemblies needs a raw mat to prepare. some times we send only the bottom most level raw to vendor for sub-contracting and we receive sub-assembly 1. at the time of design we are not aware whether it is manufactured internally or externally.in above scenario how to set multi level bom and what will be mrp results (mts,0 stock)? thanks in advance.

Dear Yadav,
Here the question is only about the procurement type and special procurement type which comes when
creating the material master and not in BOM.
Only this procurement type is going to give the impact when running MRP and BOM has to be created
whether it may be a sub-contracted or inhouse manufactured.
You can create 2 different BOM's if the sub-assembly is going to have a separate BOM for inhouse and
separate one for a sub-contracted one.
So check with this and revert back.
Regards
Mangalraj.S

Super BOM for not KMAT materials

Hi Gurus
I have a client requirement to maintain the BOM for finished product as a Super BOM even though the material is not KMAT material. Super BOM has got KIT materials. Based on this customer requirement only certain materials which goes in to finished product are get selected and should check the availbility of those components and it should create a planned orders and purchase reqn After MRP run.
My question is how the KIT materials are maintained in BOM?
how the materials get selected while creating a Sales order w/o usinf Variant configuration?
Does all the super BOM materials get consumed after the production confirmation?
Quantum.

Hi,
What do you mean by KIT materials.
By the way you can still maintain material as Configurable w/o selecting material type as KMAT.
Just you need to do is select material type FERT / HALB as applicable and then maintain material is configurable check box ticked in Basic Data 2 View in material master.
Pls revert with more details.
Regards,
Tejas

Need clarification for MRP Run

Dear SAP Guru,
Need the clarification for MRP Run:
1.At the time of MRP Run what is the status function for - shipping notification?
2.First i have run the mrp planning mode is normal after that i have some changes in material master , so planning mode is - RE Explode planning & Bom ? AT THE TIME OF MRP RUN it is correct
3.In background MRP Run at MDBT - what is the PLANNING MODE ?
4. How will work on automatic PO Create through MRP Run PR\S.?
Kindly give me the feedback , i am waiting for your reply.
Thanks,
Uma

Hello Uma
1 - A shipping notification is a confirmation from the vendor that the material has been shipped.
2 - When you change your BOM or material master MRP settings, system automatically set a flag on the planning file to re-explode the BOM. Therefore, MRP automatically re-explode the BOM, even with planning mode 1. Planning mode 2 is only necessary when you need to force a new BOM explosion and I don't recommend you to use it frequently, as it may lead to performance issues. See my document MRP: Why shouldn’t I use planning mode 3 on a productive system? for more details.
3 - See notes 206666 MRP: Control parameters during planning and 135788 - Planning mode in material requirements planning.
4 - MRP does not create or change purchase orders or production orders. MRP can only create planned orders, purchase requisitions or schedule lines.
At last, I wrote the following document with links to the MRP FAQ notes, which may be helpful to you:
MRP: Frequently Asked Questions
BR
Caetano

Planning Plant & Production Plant configuration for MRP

Hello PP Guru's ,
What is the configuration required for Planning ( Trading ) Plant & Production Plant for MRP . In the Planning plant only MMR
is available and no other master data . My production is MTS and planning without final assembly .
Regards,
Jaya

Hi DSK,
If 1, 2 , 3 ..... 20 plants are my Planning plant including depos XX   is my production plant how needs to fill the following
Under what Plant i need to give all these details in OPPQ for special procurement
1 .Production plant " "   / Planning plant
    SPk 40
   Procurement type F
Under Special procurement TAB
Special procurement " U "
Plant   " is this Production plant "
As Bom component tab : should i tick direct production ( production plant )
issuing Plant " is this production plnt "
Jaya
Edited by: jaya vimal on Jun 12, 2010 7:58 AM

Report for MRP PO

1. I want a report which diplays POs & PRs created through MRP & created manually. How?
2. Through Document type we can easily distinguish between the Purchase Requisitions that have been generated through MRP and those created manually. How?
Regards
VS

YOu can get the report for req created by MRP/Manually or any other criteria by using transaction ME5A
Use ME5A then from dynamic selection (On Maib screen color button) select the creation indicator by double clicking on it and entr the value B for MRP same way for any other REqs
This will give you the exact reports which you are looking for it so you don;t need to create the new document type for this purpose
rewards the points

Open Purchase Orders not considered as requirement for MRP Run

Hi ,
We are facing a issue of Open Purchase orders not appeared in Stock requirements list and also it is not considered as requirement for MRP Run against reservation.
As aresult for a reservation demand of 10 units we are ending with Open POs 10 units and a additional planned order 10 units.
Material Type : ERSA
MRP Type : PD (or VB)
Lot size : EX ( HB if MRP Type is VB)
Could you please throw some light to correct our settings to MRP to consider Open POs?
Saravanan

Can you check to see if there is a re-order point set up for this materia? That could be causing the problem too.

Separate Doc.Type for MRP generated PRs

Dear All
We are facing an issue with MRP process where we want to automate the process from MRP run to PO creation.
In source list we will add the existing contracts and make it relevant to MRP so that after MRP run we will get source (vendor defined in the contract) assigned purchase requisitions. After that, we will create a background job for ME59n in order to get the POs automatically after MRP run.
In this process we are facing issue with the auto PO generation through ME59n as funds management (FM) related parameters such as Fund and Fund center need to be enetered manually at the time of PO creation in our system. So in order to avoid this manual entry we want to define FM derivation which automatically populate the fund & fund center in the MRP generated PRs.
Further, we have two options for FM derivation one is valuation class and the second one is Document type. If we define the FM derivation based on the valuation class we cannot only restrict to MRP generated PRs. Second option is separate document type for MRP generated PRs.
Please provide pros and cons regarding the creation of new document type for MRP. Also, please provide your suggestions or any work arounds for the above discussed scenario. Your inputs are highly appreciated.
Thanks in advance.
Prabhas

Hi nagaraj
it makes sense . i will explore and tell you.
what about your source assignment standard program. hope it will assign source of supply if it is a valid unique source of supply else it will assign eprofile to your purcase request. check with technical resource how the satndard program behaves.
i will also explore my side again. check mm forum too on your purchase organisation assignment for your userexists.
one question to you.
when you create a PR for material and go to source of supply .why do we get many fixed vendors like contracts,info record if we have valid fixed vendors as sap ecc standard.but in my PR i may not have Purchase organisation information.
muthu

Sales order block for MRP run when the Customer payment terms is in Advance

My client needs to block some sales order for MRP which customer payment term is advance. But it should be based on the customer payments terms (In case of Advance). After getting his advance amount, we would be release it and it also be consider for MRP.
Option 1.Status profile this concept is will controlled by sales document controls VOV8 not by customer's payment term Advance
Option 2: In CMR sales area Billing Document tab by using payment guarantee procedure and in VOV8 in billing tab Payment guaramtee procedure by using this setting , i am getting a pop up message" No Finanical document assigned" in sales order when u try to save. Now sales order is blocked for delivery but not MRP run.
i am to ask the abaper to develop "here in the information box we will maintained required text say example u201C customeru2019s Payment term is in advance please check the reason for rejection number u201Csay ex: 13u201D: advance " after this is happen go to change mode of sales order put reason for rejecation" now MRP run will not generate the requirement for the sales order.
for Undo these this flow :
Va02 : remove the reason for rejection keep it in Blank
VKM3 : release the sales order.
Options 3: Development
Kindly suggest me the second options is only alternative for solving this issue but really i m not used specific feilds to solving this issue.

Cleint is not using the field in CMR Payment granatee , i gone for user-exit and closed this issue

Bom for production order and subcontracting

Dear guru ,
I have a finished material that can be use both produced in-house and procured externally with subcontracting.
Now i use one only bom with usage 1 (production ) for the two process.
I have a problem for one component.
For subcontracting i must consider this component as a phantom (with explosion of its components) , instead for the in-house production I must consider this component as a normal stock item.
Can I use only one bom or I must create an alternative bom for manage the two cases ?
Thanks for your help.

Dear CRIS,
In my understanding this may create discrepancies during the material transfer from own stock to the vendor and also during
month end checking process.
What's the problem of maintaining that component as a stock item?why it should be treated as a phantom only for sub-
contracting?
Even if you are maintaining 2 different alternative BOM's for the final product one with the component as a normal assembly and
the next one as a phantom,you will be facing issues during costing purpose and material inventory also.
Come back with your further questions.
Regards
Mangalraj.S

BOM for MRP

Similar Messages

Maybe you are looking for