Bonjour error - "other person's computer may be unreachable"
I am having problems sending iChat messages to other users running Leopard over our local network. I get this error:
Bonjour error
Instant Message connection failed. The other person’s computer may be unreachable.
Does anyone have any ideas on how to get around this?
I can iChat with Tiger users with no problems.
Thanks,
James.
Make sure the other computer is on the Same LAN and in fact the same Subnet of a LAN if there are subnets.
Subnets are created when you use a second routing device and have one or more computers each side of it.
EXAMPLE
Routing modem <-> Computers and a router with that router <-> more computers.
The? "more computers" will not see the first "computers" as in the same Subnet.
8:57 PM Wednesday; July 30, 2008
Similar Messages
-
Bonjour computer may be unreachable
I have 5 imacs in my office and we use ichat (text) to communicate. Whenever any of the computers try to send a message to one particular computer we get a "Bonjour connection error. The computer may be unreachable." The computers name shows up in the bonjour list. Other computers can receive messages from this computers. A few of the computers will attempt to send messages to this computer and never receive the error message, but the instant message still does not go through.
Make sure the other computer is on the Same LAN and in fact the same Subnet of a LAN if there are subnets.
Subnets are created when you use a second routing device and have one or more computers each side of it.
EXAMPLE
Routing modem <-> Computers and a router with that router <-> more computers.
The? "more computers" will not see the first "computers" as in the same Subnet.
8:57 PM Wednesday; July 30, 2008 -
Would like to share music with someone. Currently the computer registered with the iPad is out of commission. But since you can pretty much do everything on the iPad another computer was not purchased. How can I utilize home sharing with out two computers?
You don't. Otherwise they would have called it Device sharing.
-
1. iPodService (32 bit) 2. BONJOUR error 3. Unistall and use my id on new computer
Hello I have two issues. First is the line I have. I keep getting the "iPodService (32 bit) stopped working and was closed message. I have rebooted, I've looked on line and have tried to get the correct answer.
Second question: I keep getting the Bonjour error message. They may be related.
LASTLY..... I can no longer check all of my songs in iTunes. Half of them are greyed out. I still play them but there is something wrong. I can say this all started when I installed the new Norton Antivirus and removed the McAffee.
OK, I lied, one more question.
I have 3 lap tops. All are mine and I use for personal work and photos. My husband put my daughters iTouch on one of my systems. I have tried to uninstall his information and use have it as mine (since it is my computer). I uninstall and re-install, and continue to get all of the junk he installed on it.... Barney cartoons, Sponge Bob, etc. I don't want them on my system and want my library on it. Any suggestions.
With that, we can't get her iTouch to download on to her system. It states she can't because it is on another system............ Ok, those are my issues and would love any guidance available.>
My application uses the provider for the web app and references a version of the Oracle.DataAccess.dll 2.112.1.0. which we use for the build process. When we deploy a release package we also deploy this dll as up until now it has seemed to be compatible between the different versions as we also have some customers still on 2.102.2.20 of the oracle client and ODP. You can't deploy that DLL. If you do, your program will see it and try to use it first, which means that DLL will then call whatever version of Oracle is on the machine. If they're not compatible with each other (and in this case they're not), then it's just not going to work.
Once the managed provider beta comes out I'd take a look at that, as this sounds like the exact scenario it's going to fix. You can just include it and your program will use that for it's Oracle connections no matter what native client is installed (or even if there isn't one).
In the mean time if you want people using 10.2 to be able to use it, you should probably be referencing 10.2 when you create it. If you have a reference to Oracle.DataAccess.dll but don't include it, the program will look for it in the GAC and use the version on the machine instead. -
Someone else bought an app on the store on my new computer. I had already purchased the app before on my old computer, so I deleted the app on my new computer that the other person purchased. I now want to download the app again through MY account. When I click INSTALL it asks for ID, but it shows up automatically with the other person's ID, so I delete that and enter mine instead. I then click SIGN IN, but then it says "Unknown error", then I click OK, then it says "We could not complete your request. There was an error in the App Store. Please try again later. (4)". How do I get rid of all info of other people's IDs so I can get the app through my account again?
The app that I'm trying to download actually might have been a pirated app. But I deleted it, so why is it not letting me get it through my account?
Please help!
Thanksyou may delete this discussion. I fixed the issue
-
I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application How can i download it?
In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application" -
Repeatedly, this error code suddenly appears on the screen and I don't have a clue what it means or what to do: "A script in this movie is causing Adobe Flash Player to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?
No Yes"Hi,
Some "movies' are actually Flash files.
This means the Flash App will play them (possibly in a browser in some cases).
Depending where this item is and how it is playing it may be effected by other things
A web page can include javascript.
Apple uses javascript here to help with creating the posting box, the Edit options, Adding pics/smilies and the like.
Sometimes the javascript can be what is called a runaway process and gets sort of stuck in an endless loop.
If it is a free standing item then it might be triggered by AppleScript on the Mac. (or be modified in some way)
Again if the Script (normally written with a upper case S) is not perfect it can cause problems.
9:09 pm Wednesday; February 26, 2014
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I am trying to find out what information it actually stored on my iCloud. I shared an account with someone and no longer do however I believe that the other person has accessed all of my contacts. Is there a way I can find out what was on the cloud that was accessed.
You can go to icloud.com from your computer to see what data is in the account (other than photo stream photos and your iCloud backup), but you won't know what data may have been accessed by someone else. If you're concerned, change your password as discussed here: http://support.apple.com/kb/HT5624. After changing your iCloud ID password, go to Settings>iCloud, tap Delete Account, then sign back in with the new password.
When you delete the account it only deletes the account and your synced data from your device, not from iCloud. Provided you are signing back into the same account your data will be synced back when you sign back in. Save you photo stream photos before deleting the account (tap Edit, tap the photos, tap Share, tap Save to Camera Roll) -
why does adobe photoshop elements 6.0 not show up for a download choice of putting my photos into my computer, I'm on windows7. I'm sure it did when I first got my computer. Could it be that I have lots of other photo software that may be interfering?@@
If you open the Organizer and go to Edit>Preferences>Camera or Card Reader, do you have Auto Launch Adobe Photo Downloader on Device Connect checked?
Try checking that if you don't. -
I clicked "yes" to upgrade iTunes and now it doesn't work. I get an error message stating my computer is missing MSVCR80 and then a message stating Error 7 (Windows Error 126). I've tried reloading iTunes twice. What can I do?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Approached by a company indicating they have received error waring from my computer.
Has anyone else been approached, over the phone, by a company purporting to be a security company working for Apple.
They indicated that they have been receiving error messages from my computer.
The person wanted to me to connect to the internet so that the technical section of the company could remove the infected files ~ whilst I watched.
Is this a scam or is it legitimate?
Does Apple have a company that looks at the security isses with their computers?Allan Jones wrote:
A total scam! Slam the phone down!
I tell them that I am transferring their call to my I.T. department and simply lay down the phone and go about my business of the day.
I confess that I have occasionally entertained such callers to a short, one-man concert played on a duck call
For such occasions, I have a toy cell phone, which I hold up to the mic end of the phone, that plays tones and beeps and says "hello, who's calling? Operator, may I help you?"
The last two times, I wanted to get them to stay around so I could have some fun and games, but they hung up right away.
I suppose what they're doing beats working in some garment factory fire trap in Bangladesh. -
One of the user is getting the below error when the person is trying to login ELM system. what could be issue for the specific user and how do we resolve this issue?
"Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator"Its works for other users, its only happened for one specific user only? I didn't check the APPSRV.LOG file? what needs to be checked in APPSRV.LOG, I can ask my infra team to check, because I don't have app server access to check log file.
-
T61 - Blue screen error message (nv4_disp) - Now computer won't even start!
Hi I have a Lenovo T61 (Type: 7662-CTO) Windows XP.
A couple days ago, all of sudden my screen turned in a yellowish hue, started flickering intensely and froze; I had to manually shut it off (by pushing the power button).
Next day, I started my computer and it worked fine until I had the exact same flickering and freezing issue, but this time, the screen didn't turn in a yellowish hue. Once again, I manually shut it off and went to bed.
This morning, however, when I started my computer, my screen went totally blank, though I could hear my computer running. I hooked it up to my TV to see if anything comes up and that's when I got this blue screen of error message.
It says:
================================================================================
Problem has been detected and windows has been shut down to prevent damage to your computer.
Problem seems to be caused by the following file: nv4_disp
If this is the first time you’ve seen this stop error screen, restart your computer.
If this screen appears again, follow these steps:
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates.
Technical information:
** STOP: 0x000000EA (0x8A4803C8, 0x88FFD500, 0xBA4EFCBC, 0x00000001)
nv4_disp
beginning dump of physical memory
physical memory dump complete.
contact your system administrator or technical support group for further assistance.
==================================================================================
It would show this blue screen very briefly and rebooted by itself (without letting me log in windows), so I had to once again manually shut it off.
I thought perhaps cleaning a fan might help, so I opened up my laptop, cleaned the fan, keyboard, palm rest etc and assembled it back together.
When I turned on my computer, now I'm getting NOTHING. Not even a blue screen. Computer would start, but very briefly after (just a few seconds after), it would just shut it off by itself.
Someone please tell me what's wrong with my computer and if I can revive it at all.
Also, would you recommend me to bring it to the local Lenovo repair center (http://bplocator.lenovo.com/)?
Thanks so much for reading a long message.marissa07, welcome to the forum,
marissa07 wrote:
......snip..
================================================================================
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates.
==================================================================================
Have you tried updating your graphics driver?
Error message in Windows XP: "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER"
You can find the latest driver for your system here. Another option would be to run ThinkVantage System Update, which is hopefully on your system, if not you can find it here.
I'm not saying this is the solution or ruling out a hardware problem, (which the flickering suggests), but it's a good place to start
Let us know
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Unable to update iTunes: Related to Bonjour error "WSARecvMsg error 87"
I am running iTunes 9.2.0.61 on Windows 7 Ultimate x64. For some time, I have been unable to update iTunes to the latest version beyond what I have, regardless of what the latest version is.
Using Apple Software Update, I get the following error during the update:
"Errors occurred while installing the updates. If the problem persists, choose Tools > Download Only and try installing manually."
Accompanying this error in the Application log in Event Viewer are a few errors:
Event ID: Source: Occurrences:
100 Bonjour Service 7
11920 MsiInstaller 1
Event ID 100 from Bonjour Service has the following message:
Log Name: Application
Source: Bonjour Service
Date: 10/31/2010 8:51:05 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: WILL7
Description:
The description for Event ID 100 from source Bonjour Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
WSARecvMsg failed (87)
The specified resource type cannot be found in the image file
Log Name: Application
Source: Bonjour Service
Date: 10/31/2010 8:51:05 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: WILL7
Description:
The description for Event ID 100 from source Bonjour Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
WSARecvMsg failed (87)
The specified resource type cannot be found in the image file
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-31T12:51:05.000000000Z" />
<EventRecordID>16990</EventRecordID>
<Channel>Application</Channel>
<Computer>WILL7</Computer>
<Security />
</System>
<EventData>
<Data>WSARecvMsg failed (87)
</Data>
</EventData>
</Event>
Here is the error for event 11920 from MsiInstaller:
Log Name: Application
Source: MsiInstaller
Date: 10/31/2010 8:51:06 AM
Event ID: 11920
Task Category: None
Level: Error
Keywords: Classic
User: WILL7\swsander
Computer: WILL7
Description:
Product: Bonjour -- Error 1920. Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MsiInstaller" />
<EventID Qualifiers="0">11920</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-10-31T12:51:06.000000000Z" />
<EventRecordID>16991</EventRecordID>
<Channel>Application</Channel>
<Computer>WILL7</Computer>
<Security UserID="S-1-5-21-2626302321-2836749625-3976135476-1001" />
</System>
<EventData>
<Data>Product: Bonjour -- Error 1920. Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services.</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>
</Data>
<Binary>7B34314246304445342D354241452D344238382D414644332D383641333042323232313 8367D</Binary>
</EventData>
</Event>
I checked my Services console and Bonjour was started. I can also stop and start it without issue. I searched for these errors, but most of what I found was trouble getting the Bonjour service to start and as you can see, this is not my issue.
I have also tried to update iTunes with Bonjour stopped and disabled and with my Eset NOD32 Antivirus software disabled, but neither of these steps made any difference. I do not have a third-party firewall on my PC, but I am using Windows firewall. I have also tried disabling the Windows firewall, but this made no difference.
Any help would be appreciated.More information:
Found this in the System log in Windows Event Viewer. There are many occurrences coinciding with the times I have been trying to update iTunes and/or Bonjour.
Log Name: System
Source: Service Control Manager
Date: 10/31/2010 9:44:14 AM
Event ID: 7024
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: WILL7
Description:
The Bonjour Service service terminated with service-specific error The parameter is incorrect..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7024</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2010-10-31T13:44:14.338716200Z" />
<EventRecordID>94955</EventRecordID>
<Correlation />
<Execution ProcessID="876" ThreadID="4212" />
<Channel>System</Channel>
<Computer>WILL7</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Bonjour Service</Data>
<Data Name="param2">%%87</Data>
</EventData>
</Event>
Message was edited by: scottws -
HI Guru's
We are sourcing Employee records from upstream system and the Effective_start_date for particular record of Employee is getting changed, consider a below scenario.
EXISTING RECORD.
Person_id, effective_start_date,Effective_end_date, person_type
123, 01-JAN-2001 ,31-MAY-2001, EMP
123, 01-JUN-2001 ,31-DEC-4712, EMP
MODIFIED DRECORD
Person_id, effective_start_date,Effective_end_date, person_type
123, 01-JAN-2001 ,14-MAY-2001, EMP
123, 15-MAY-2001 ,31-DEC-4712, EMP
So when i am able to change the effective_start_date for 2nd record from 01-JUN-2001 to 15-MAY-2001 using an API "hr_person_api.update_person" with p_datetrack_update_mode as 'UPDATE_OVERRIDE'..
but after this when i am trying to terminate the employee using an API "hr_ex_employee_api.actual_termination_emp" for below scenario, i am getting the following error: "The person must exist as an employee at the time specified by Date Start".
For Termination:
Person_id, effective_start_date,Effective_end_date, person_type
123, 01-JAN-2001 ,14-MAY-2001, EMP
123, 15-MAY-2001 ,09-JUL-2001, EMP
123, 10-JUL-2001 ,31-DEC-4712, EX_EMP ----> Not able to process erroing
Please help me in resolving this issue..
Regards,
MushtaqHi,
Just wondering if this is an ATG related question.
Thanks,
Gopinath Ramasamy
Maybe you are looking for
-
Hi .. I am using Axis(1) to select all the retrieved records. The MDX query looks like- WITH MEMBER [Measures].[New Opportunity Count] AS SUM( {DESCENDANTS( [Opportunity].[Opportunity].CURRENTMEMBER, 1 iif([Measu
-
ResourceBundle loading algorithm.
Hi folks, I do have a problem/question with the resource bundle loading algorithm. Here is my setup: I have written a taglib which retrieves the user locale from the request and returns a message in the user's language, if the resource bundle does no
-
Business Content Objects on BI side for the business content data sources
Hi All, We are doing a fresh implementation, and would like to know the step by step way through which i can know the relevant business content objects on BW side for a BC data sources ,,,,, 0material_attr and 0mat_sales_Attrt As Per my understanding
-
Out of focus still photos in time line
I have been sent a disc of 11 photos that I down loaded into Iphoto. They are all excellent quality, but when I drag them into the time line and press PLAY, they go out of focus. Press stop and they are clear again. Any thoughts
-
Upgraded a computer - Gameport stopped function
Hi all. This is interesting. I recently bought a brand new computer, and installed XP. I wanted my old joystick to work here, so I intalled my old sound card, which worked fine in the old computer (as did the joystick). Now, the sound works fine, but