Boolean property export issue in DRM

Hi All,
We have a boolean property in DRM. In DRM 1.1.2, when we export this property to Database, it populates value as -1 for True and 0 for false.
But in DRM 1.2.2, the values appear as TRUE/FALSE in the column in the database. Is this an expected change in the DRM behaviour?
This is causing problems in our integration logic.
Any help on this would be appreciated.
Thanks & Regards,
Prasad

Hi Shashank,
With the latest patch .306 and a series of prior ones , its more like the Character encoding sets have started working in DRM and they will slip in special characters here and there, I have faced this with the latest releases of DRM.
It would be advisable to use US ASCII encoding or Western European Windows.. that should solve your issue.
If you have to make changes on all the exports and if they are too many in number then search xml tag
<drm:CodePage>20127</drm:CodePage>
and make sure the code page is 20127 which represents US ASCII.

Similar Messages

  • Populating values in Boolean Property

    Hi ,
    I am working on version 11.1.2 . I have created a Boolean property - 'Country Flag' . Made that property as Defined , Boolean and Local Node.
    I am trying to import a file with this property value as 'TRUE' . But in the imported hierarchy , this boolean property does not show up any value(True / False).
    The below is the file i am trying to import-
    [hier]
    Product|P000000
    [relation]
    P000000|NA|Total Product|True
    P100000|P000000|Cars|True
    P110000|P100000|Hatchback|False
    P121000|P110000|Yaris|True
    P121100|P121000|Yaris - 3 Door Liftback|False
    The last value does not get populated in the hierarchy in DRM.
    Please help in this
    Thanks.
    Edited by: user10979332 on Jun 22, 2011 10:18 PM

    Hi ,
    I visited the link - http://otndnld.oracle.co.jp/document/products/epm/111200/E-17236/epm.1112/drm_1112000_readme.pdf
    Its mentioned there that this is known issue
    Defect no - 9450750
    Imported hierarchy-level properties of type Boolean do not get set.
    But in my case I created a local node property and not a hierarchy level property so does this defect applies to local node properties as well?
    Thanks for the clarification in advance!!
    Edited by: user10979332 on Jun 26, 2011 9:13 PM

  • Export out of DRM/Import into PeopleSoft

    Hello,
    Do any of you have experience creating an export out of DRM to go into the PeopleSoft system to create trees?  The PeopleSoft system has a Tree Import; however a file needs to be in a certain format for the Import to work.  I wasn't sure if DRM was capable of creating a file in the correct format that PeopleSoft needs or if DRM should just export it's tree data and let the formatting be done by a different tool (ETL, App Designer, etc.).  We are on version 11.1.1.2.103.
    Below is a high-level example of what the Tree Import file should look like.  The 999 lines would be the header lines, and each of the lines underneath the header has a different format (which is fixed-length).
    999TREE_VERSION
    Tree Version Data
    999TREE_STRCT
    Tree Structure Data
    999TREE_DEFN
    Tree Definition Data
    999TREE_USERLVL
    Tree Level Data 1
    Tree Level Data 2
    Tree Level Data
    999TREE_LEVEL
    Tree Level 1
    Tree Level 2
    Tree Level N
    999TREE_USERND
    Tree Node Data 1
    Tree Node Data 2
    Tree Node Data N
    999TREE_NODE
    Tree Node 1
    Tree Node 2
    Tree Detail 1
    Tree Detail 2
    Tree Node 3
    Tree Node 4
    Tree Node N
    Tree Detail 5
    Tree Detail N
    Thanks in advance for any help you can give me!

    how much i understand below are some points:
    1- for tree format can be used DRM Export option tabbed output(Export-Style-Tabbed output).
    2- For fix length attribute could possible to use Export- Target-Fixed width
    you need to do some workaround to generate file as per peoplesoft requirement. Like Different -2 exports as per 999* header lines to meet requirement , hard code header if needed , club all exports in Book to generate one single file.
    Please explain more on file format so that can try to help you better.
    Thanks!
    Sandeep

  • Bizzare export issue

    Here is a very weird export issue. Windows XP.
    Project is set at h264 1920x1080 mono audio 29.97 fps
    I have 30 shots that make up the sequence. Each shot is exactly 90 frames. I exported each sequence at h264 1920x1080 with one channel of audio. The first shot exports just fine and is 5 MB. The second shot exports at 10 MB. The third is 15 MB, the tenth shot is 50MB. But the picture is still 90 frames for each shot. BUT, when I export without audio each exported file is just 5 MB. If I look at the properties of each clip the duration of the video and audio is just 90 frames. If I open one of these clips in QuickTime Pro and re-export it as source then the files size goes back to 5 MB; same video, same audio yet with the correct file size.
    Anyone seen this before?
    Is there a setting that could be incorrect?
    -cablet

    Weird, man. Not sure what might cause that.

  • Use of boolean property node in LabView 6i

    I am running LabView 6i version 6.0.2.
    I am using a reference to a front panel boolean control to stop the execution of a state machine in a subVI.  The subVI has a property node linked to this reference.  This property node shows that it is "Bool", but when I set the property node's element to "value", the value is not a boolean type.  I can't figure out how to set the boolean property node's element so that I can read the state of the boolean control.  How should I configure this?  

    The data type of the value property is a variant.  It is possible to convert a variant to a boolean, but you probably don't want to do that.
    The reason is that you have the mechanical action of the boolean set to "latch ...", and that means that the value property isn't very useful.
    Change the mechanical action to "switch ...", then the value property will be a boolean.
    Note that this means that you will probably have to reset the boolean programatically after the user clicks on it.

  • CF9 Service not starting - error parsing boolean property notifyclientonalert

    Hi, I clean installed CF9 (after uninstalling CF8) on win2003 32bit and all was workign fine, however after a server restart the CF9 Application service refuses to start automatically or manually. I am getting an error in windows event logs saying see Coldfsuion logs, but there is nothing in these logs, not very helppful!  any ideas apart from a reinstall?
    After reinstalling I get the same problme, but this tuime in coldfusion server log I get the following error message
    "Error","jrpp-2","11/17/11","16:21:59",,"Monitor service: Error parsing boolean property notifyclientonalert, using default false"
    thanks
    Oli

    Hi Oli,
    Suggest try start CF from CMD prompt. Run cmd as an admin, CD ColdFusion9\bin\ , type CFSTART press enter. Some detail of what happens?
    HTH, Carl.

  • Crystal JRC PDF Export Issue

    We are experiencing a PDF export issue with Crystal JRC version 12.2.202.  The PDF report shows 1 of 3 pages but ONLY the first page is generated.  When this occurs, ALL other users that are exporting to PDF experience the same issue with any multiple page report.  I can't find any errors in the log that would indicate what the problem is.  To resolve the issue, I have to recycle the WebLogic application server that hosts  the JRC, which would indicate something gets "locked" in memory and gets cleared when the app server is bounced.
    Any ideas on how to resolve this ?

    Hi Ted,
    Thanks for the response!
    Though, the mentioned Sun JVM Bug explains the root-cause, the Bug status also state that it is not fixed yet.
    Also, we are reluctant to change the JVM Option to -Xint due to unknown impacts on JVM optimizations.
    Is there a patch released for CrystalReports to deal with this behavior? We are using CRJ runtime 11.5.7.620 and seeking for a patch on this version.
    Thanks.

  • PP CS5.5 FLV To MP4 Export Issues / Problems

    I just upgraded from Production Premium CS5 to CS5.5. I do a fair amount of converting/exporting of imported FLV files (downloaded from internet news sites) to H.264/AAC w/ MP4 wrappers using Premiere Pro (PP) and Adobe Media Encoder (AME). My equipment is a 1+ yr. old HP Win 7 Pro w/ an Intel i970 Quadcore, 12 Gb RAM and MSI nVidia GTX 470 GPU. I have never experienced any queue or export issues w/ CS5 (at least that I noticed), but I am experiencing noticeably degraded queue export and direct export problems with these files in CS5.5.
    Description: (1) The queue export times for the exact same imported FLV clip(s) using the exact same sequence settings and H.264/MP4 export settings are noticeably slower in CS5.5 (sometimes 2x, depending on the export settings, e.g. using maximum render quality) than in CS5; (2) My MSI Afterburner GPU monitoring software indicates 5-10% GPU usage during queue/export in CS5, while indicating 0% GPU usage (flatline) in CS5.5; and (3) When I attempt to direct export these files using CS5.5 I get the following error message: "The source and output audio channels are not compatible or a conversion does not exist."
    I suspect that it may have something to do with "conforming" anomalies when the FLV file is imported into PP, but I would put that squarely in the category of rank speculation on my part.
    Has anyone experienced the same or similar problems or have any insight into what may be the problem(s)? Of course, thanks for any help/insight you can provide.
    Jim

    What do you mean by a better routine?
    A better compression routine than H.264.
    Is the quality better than H.264?
    Yes.
    Does this use an MOV wrapper?
    Yes.
    Also, would it import correctly into PPro?
    Yes.
    we would import files into PPro exported out of FCP and would get a red pixelated glitch during preview and export. Does this codec solve this problem as well if it is an MOV wrapper?
    I don't know anything about FCP.
    Sorry for all the questions, just want to get things right before diving into a new codec.
    It's harmless, and free.
    Download it and run some tests.

  • Simple flash export issue

    hello
    I'm trying to export a flash video using Adobe media encoder from Premier Pro, but when I do I get this error " there are no clips to build".
    I have another file that I am able to export and it does not have this problem.
    They are Windows Media files and play in Premier fine. I am using Premier Pro CS3.
    Lastly, I'm not a video expert but I really need to get these up on the web for work, there is a lot of pressure and I need to get it done.
    Regards,
    Tom

    fixed the exporting issue.

  • Exporting ISSUES! Help

    I am a relatively new user to lightroom.  I haven't had any exporting issues until today.  I am attempting to export a photo/photos to a specific folder with a custom name.  When I do this it exports the WHOLE library and NOT the edited photo.  What am I doing wrong??

    Lightroom usually exports all images that are highlighted. If you only want to export one image then make sure it is the only image that is highlighted.

  • Exporting issues after 4.2 upgrade

    Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

    Are you using an Export preset, or setting the Export up manually each time? 

  • Reporting Export Issue from Taleo

    Can anyone help?  We have a work around for the Exporting Issues into Excel 2010 regarding figures and dates only reading as text, however, a new issue has arisen.   In one field we have Aggregated Agencies assigned to any particular Job Code.   In the legacy reports, every agency name exported into one cell in Excel, now they export into individual rows, this causes a report to be too long and there is no way to amalgamate them into one cell.    Has anyone found a workaround for this?

    is there someway that it was reformatted by the Iomega drive being daisy chained to it?
    No. That is not possible -anyway, reformatting erases everything on a drive.
    You would have noticed that first.
    You can download the [NTFS-3G driver|http://macntfs-3g.blogspot.com> which will let you read, write and even reformat the clients drive as NTFS on the Mac. All reasonably modern Windows PCs work with this disc format and you won't run into the file size limitations associated with FAT formatted drives.

  • Using 128bit key Blowfish and any export issues

    Hi,
    I want to use blowfish (symmetric key algorithm) in my product and which will be shipped outside US. Reading Sun's documentation I am bit confused and I am not sure if the jce package is going to be available outside the US.
    Has anyone used the default available symmetric key algorithms in the JCE package (javax.crypto.*) and faced any export control issues ?
    Please let me know.
    Thanks
    RT
    Here is a sample code
    String ks = "123456789123456";
    kb = ks.getBytes();
    SecretKeySpec key = new SecretKeySpec(kb,"blowfish");
    Cipher cipher = Cipher.getInstance("blowfish");
    // Initialisation of cipher object for Encryption.
    cipher.init(Cipher.ENCRYPT_MODE, key);

    1. the issue is rather an import issue for some countries, than an export issue for US as far as you use jre>=1.4 .
    you can read the
    'Downloading the "Unlimited Strength" Jurisdiction Policy Files'
    section of
    http://java.sun.com/products/jce/javase.html
    2. The restricted (defualt) shipped version already covers Blowfish if you mind that.
    3. I use Blowfish with restricted (default) version of JCE in applications deployed in europe and have not heard of customer complaining sofar: they are supposed to use webstart or jre1.5.

  • How to take care of Performance related issue in DRM?

    How we can optimize or take care of performance related issues when we have huge data in DRM application? especially when comes to Imports and Exports.
    Thanks
    -Ramesh

    Hi Ramesh,
    Below some suggestion from my side.
    1-Try to keep Current version open at the time of export and automator run.
    2-At extreme use derived property , else manage with somehow if you can
    3-If you are creating any derived property make sure you are restricting to related hier
    4-In case you are creating derived property check performance to take big hier with derived property node name and description ,if performance not seems to you satisfactory go with some other logic.
    5-Don’t use much looking property like Nodeinhier, hiernodepropvalue etc , if need then only use these
    6-Tack care of validation if you can do better with verification then don’t put validation in that case
    7-I do see some problem while loading data from DRM to DB try to avoid and use some workaround if possible ( like Sql loader)
    Not sure how much useful will be for you these points above.
    Thanks!
    Sandeep

  • Setting property variable issue

    Hi,
    I have search form with two tables.Based on search fields i have to render only one table.So that i have bind table rendered property(testSearchEnable) to the backing bean class.
    Backingbean code:
    private boolean testSearchEnable = true;
    //setters and getters to the same variable.
    search(ActionEvent ae){
    if(testName !=null){
    setTestSearchEnable(true);
    }else{
    setTestSearchEnable(false);
    Jsff:
    <af:commandButton text="Search" id="cb1"
    actionListener="#{backingBeanScope.testSearchBean.search}"/>
    <af:table rendered="#{backingBeanScope.testSearchBean.testSearchEnable }" id= "t1" partialTriggers=" ::cb1"/>
    <af:table rendered="#{!backingBeanScope.testSearchBean.testSearchEnable }" id= "t2" partialTriggers=" ::cb1"/>
    here my problem is what ever value iam seeting in search that is not effecting in the jsp page.
    But if i make varaible to 'static' it is working fine...
    What could be the reason? can i make it as static? Do we get any issues if we make static?
    thx.

    Hi,
    Always mention your JDev version. (Read through this announcement : https://forums.oracle.com/forums/ann.jspa?annID=56)
    I would recommend you to use the switcher component instead of playing with the rendered property.
    Ex:
    <af:commandButton text="Search" id="cb1"
        actionListener="#{backingBeanScope.testSearchBean.search}"/>
    <af:switcher id="s1" defaultFacet="table1"
            facetName="#{backingBeanScope.testSearchBean.testSearchEnable eq 'true'?'table1':'table2'}">
        <f:facet name="table1">
            <af:table id= "t1" partialTriggers="::cb1"/>
        </f:facet>
        <f:facet name="table2">
            <af:table  id= "t2" partialTriggers="::cb1"/>
        </f:facet>
    </af:switcher>-Arun
    Edit : Use request/view scope for the bean instead of backing bean scope.

Maybe you are looking for