Exporting issues after 4.2 upgrade

Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

Are you using an Export preset, or setting the Export up manually each time?

Similar Messages

Has any seen collection issues after 11g database upgrade?

We do have an SR open.
Just wondering if anyone else has experienced collection issues after upgrading the db to 11g? Our technical folks are hoping it is something else but for the past few weeks we have seen random issues stemming from collections. We run a full collections 5 nights a week. There are material transactions occurring during the two plus hours of collections. This seems to be randomly skewing on hand snapshots in collections as well as missing supply i.e. work orders. Only impacts a fraction of the records in material transactions and they are different every night.
Reason I believe it has to do with transactions during collections is one collection run out of the five is generally pretty good...Sunday evening for there is very limited transactions taking place on this evening.
Thanks in advance

Answer to above question not required now as:
Having read the 24th December update of note 761570.1 - 'Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade' I have decided to upgrade the database to 11.2.0.x by following the Path C option.
Unfortunately as the 11.2.0.x upgrade isn't covered by MWIZ yet I will have to follow the manual steps.

IPhone User Guide Format Issue After 4.3 Upgrade

The iPhone User Guide is no longer formatted properly since I upgraded to iOS 4.3. Although the info is there, the top third of the screen remains stationary, while the rest sometimes scrolls. On some screens, it's not possible to scroll down enough to see all the info. Has anyone else had this issue after upgrading? If so, what did you do to resolve it? I'd appreciate any suggestions. Thanks.

Have taken to downloading the PDF but it's not nearly as quick and easy to use.
You need to restore your phone in iTunes, first using a backup, and if needed as a new iPhone, without using a backup. All is explained in the User Guide.
Starting to question why I did't go android. I thought apple products err just supposed to work!
No one here cares if you go androgynous. I'm sure they all work perfectly all the time.

IPad 3 sound issues after iOS 8 upgrade

iOS sounds and some apps have very little or no volume after iOS 8 upgrade.

Hello mhael,
Thank you for participating in the Apple Support Communities.
If you experience popping sounds and distortion from your iPad Air speakers after updating iOS, start with the troubleshooting steps in this link:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
All the best,
Jeremy

Strange Application Issues after Mountain Lion Upgrade!

I'm having, what I believe to be, strange issues with a clean install of Mountain Lion from 10.6.8
It's for my boss' computer at work so I can't afford to have it down for very long at a time. It's hard to pinpoint the issue(s).
Computer:
Mac Pro - Early 2009
OS X 10.8.3
2 x 2.6 GHz Quad-Core Intel Xeon
32 GB 1066 MHz DDR3
The startup disk is 4x2TB RAID 5 using Apple RAID card (Firmware version: E-1.3.2.0; Hardware Revision: 2.00; Driver version: 124
The following is what happened/is happening:
1. (Tuesday)
Created a bootable backup of system drive using Disk Utility
Performed a Clean install
Used migration assistant to copy over applications from backup
Downloaded (from Amazon) and installed Microsoft Office 2011
Imported Addresses (including imported Previous Recipients that were imported into Contacts before exporting on old system)
Setup email & copied over mailboxes from backup
Moved all files back onto the system (User folders)
Everything worked fine from Wednesday - Sunday.
Problems reported to me (Sunday)
"Chinese characters" on save dialogue box in Microsoft Excel
Mail crashed while dragging a photo from safari to it
After a restart, Mail, all Microsoft Office apps, and Final Cut Pro wouldn't open.
Tried to reset preference files, but nothing worked.
2. (Monday night)
Performed another Clean Install
Migrated Applications
Transferred mailboxes (not old emails at this time)
Imported same group of addresses as before into Contacts
Installed Microsoft Office
Moved user data back
Transferred old email mailboxes (Tuesday afternoon)
Everything worked fine Tuesday - Thursday early morning)
Problems reported to me (Thursday morning)
When typing in an email address to send an email, it didn't autofill. Mail crashed.
Mail wouldn't open. Different from last, this time it said the ~/Library/Mail folder was moved. I checked and the folder was there with everything in it fine.
The Microsoft applications that were open at the time of the Mail crash still worked, but others wouldn't open. After closing the open applications then they wouldn't open back up (same as before)
Final Cut Pro opened fine.
Fixed Mail by deleting the ~/Library/Containers/com.apple.mail folder.
Later found out that though Final Cut would open it would crash when loading a project and that Quicklook wouldn't work for quicktime files across the network & codecs were missing (this could have been cause by me when trying to test problems).
3. (Sunday)
Restored from a different bootable backup I made after 2nd clean install and migrated applications.
Repaired Permissions using Disk Utility
Moved over Mail data
Copied over user data
*Didn't import the addresses
Checked to make sure all the fonts were validated and no duplicates
Everything worked fine after install and through Monday.
Problems to me (Tuesday morning)
Microsoft Office disappeared completely from the computer. No folder in Applications or dock icons.
Slower to connect to network files
Re-installed Microsoft Office to keep work progress going.
What would be causing this peculiarity? It works after I fix it and for a little afterwards but then strange things happen.
Would repairing disk permissions on bootable backup (of 10.6.8) before using migration assistant help?
What is the best way to track down what is causing these issues?
Thanks!

I suggest that the best way to upgrade from 10.6.8 to Mountain Lion is one of the following:
(1) Simply perform an upgrade install. This is in fact Apple's recommended approach. I am not sure why you have not yet tried that. I have done this myself successfully.
(2) Make a backup of the working 10.6.8 system; better yet is to make two complete backups, one being a "clone," the other being a Time Machine backup. Use of two different methods gives you options should something go wrong. Then erase the original disk and install Mountain Lion, and on the first boot up run Setup Assistant (which is better than Migration Assistant) and transfer over EVERYTHING, including user accounts, settings, applications. I have also used this approach, also successfully.
You did neither (1) nor (2), but seem to have done some sort of hybrid by transfering applications and then manually moving over some mail files and moving over some user files. I don't think this is a recommended approach. It can result in permissions issues, which can cause things to "disappear" or otherwise behavior oddly.
I do not understand how your use of a RAID setup and a RAID card might affect any procedures which otherwise might work smoothly. Are you 100% certain that your RAID hardware and firmware are compatible with Mountain Lion?
Assuming that the RAID is not the issue and it behaves to the OS just like a normal disk, I would try the full disk erase and install of Mountain Lion followed by a Setup Assistant on first boot up to move over everything from your clone backup.
If this does not work, then I would erase and restore back from your clone, so you get your 10.6.8 system working again. Then I would try a simple upgrade install of Mountain Lion.
If that fails, then I would erase and install Mountain Lion with one new administrative user created who has a different user name than the person whose stuff you need to restore. Then with that new administrative user I would make sure the RAID is all up and running. Then I would use Migration Assistant to migrate over users only and would reinstall all software from scratch. If that is not to your liking, I'd as a less desirable alternative use Migration Assistant to migrate over everything, applications and users. You will have that new, extra administrative user as well as the original user(s), but that should cause no harm.

IPhone 5 music playback issues (after iOS 8 upgrade)

Hi,
After upgrading my iPhone 5 to iOS 8 I have had many playback issues with my Music. Songs randomly skipping or stopping without even doing anything are some of the issues. Also sometimes when I am listening to a song it would fast forward the music.
P.S. I don't sync my music, I just manually add content.
Is there any way I can fix this problem?
Thanks
L

My wife had something like this happen with her iPad. The problem was that the device had not been synced and so some file were not loaded on the device.
The way to correct the problem is to plug the device into the computer and tell it to sync.

Airplay issues after IOS 8 upgrade

After the latest IOS 8 upgrade I have a lot of issues.
Both my ipad and iphone are upgraded to IOS8 and after that I can't stream video to my apple tv, you can see that airplay is tries to connect to my apple tv but returns to the ipad/iphone screen after ~5 seconds. Besides of that both devices also have streaming difficulties to my B&W a7 speaker, problem with this one is that it will stop after 15 minutes and to get is working I have to restart the device.
With IOS 7 I didn't have problems at all.
Do others also have this many problems and what can I do about it?
I already tried:
- Restart ipad/iphone
- Closed all active programs via the home button
- Power cycled apple tv / remote speaker
- Reset ipad/iphone (power + home button)
- Re-install all related apps (remote, B&W, video streaming apps)
- Reconnected to my home network
Since I didn't have a problem before the upgrade and this occured on 2 devices after the IOS 8 upgrade, I would say this must be related to the upgrade.
Hope someone can give me an advice.

I was able to recover my voice memos, though the original titles are gone.
I opened my Voice Memos app like everyone else and I saw each memo quickly deleting and acting glitchy. I then connected my iPhone to my macbook so I could attempt to restore the backup I had made before the ios8 update. It said it couldn't be done because there wasn't enough room. However, when I opened my memos app again, the voice recordings were there! I can't verify if it's all of them but I'm grateful I was able to recover some.
I use this app to record lyrics on the go and I'd really like Apple to step up and fix this.

Exporting Issues after Mountain Lion install.

FCP 10.0.3 and recently upgraded to Mavericks.
Getting this message when trying to go to Youtube: com.apple.Compressor.CompressorKit.ErrorDomain
I don't have Apple compressor.
Export won't work. It's not greyed out either. Just does nothing when I hit the export command.
How can I get my projects to export?

Thank you kindly for the clarity on this Tom.
I'm trying to update FCP to a newer version to outcome this issue, but I am at a slight loss...
Do I need to purchase a whole new program? Because I do not seem to be able to find another update option.
Happy Daze [almost],
Pete/.

Imac g3 screen issues. (after attempting to upgrade.)

Hello!
I was installing mac osx on my failry old imac g3. It told me that my firmware needed to be installed. So I clicked restart. When it restarted, my screen didn't show up at all! I restarted again and my screen was faint, crooked and blue. Now I can't even run my original os9!
Did I delete some kind of screen setting!?
How should I fix this!?

For a firmware update to be applied to such a machine, the machine has
to be running/booted into OS 9.1/9.2; and support for the USB pen/flash
drive would have to be working inside the computer to import from one.
If the iMac G3 has FireWire ports, you could use a FW cable from another
Mac and use that Mac to import the firmware update into the hard drive of
the other computer; or use disk utilities of the proper type to attempt to
repair the old iMac's hard disk drive before going further. Could be not
only is the logicboard in jeopardy, the drive may also have issues.
[In some cases, a dead or weak clock battery can also be a problem in
the process of firmware updates and PRAM matters.]
The incompatibility of pre-Firmware updated iMac G3s to properly
display video is part of the symptom you get to experience in a sit-
uation where the OSX was installed (or X disc was used to boot the
computer, before firmware was updated in the running OS9 system.)
A different hard drive with the OS9 system for the iMac installed on it
with the Firmware Update on it, and put into the iMac could help in the
process; but you'd have to run the Firmware update after the computer
itself was physically installed in the drive to flash the computer's ROM
and upgrade the bootROM firmware to 4.1.9 or whatever your's needs.
A universally recorded CD-R would work in both a Mac and a PC; Mac
users have been making these for years, usually on a Mac, of course!
Discussions and ideas about the failed or non-applied firmware update:
Firmware problem solver tutorial for slot-loading CRT iMac G3s:
http://www.capecodgraphics.com/imac_firmware.htm
http://www.capecodgraphics.com/pages/macintosh.html
There are a few different approaches to attempting to solve this;
one company has a special process and wanted to sell something;
this following quote is someone's experience from the above link.
"...I thought, what the heck, it's good as dead already... why not try one
more thing? So, I held down the Programmer's button on the side of the
iMac while starting it up.. and bingo! It didn't shut down this time! The
screen was black, but it was up and running to some extent. I hooked up
a PC monitor to the iMac and saw the Open Firmware screen. This was
pretty exciting, until I realized that it was not accepting any input from the
keyboard or mouse. What now? I stuck my OS 9.2 CD into the slot, did
the "3 finger salute" reboot, held down the C key and prayed harder than I
have in a while.... and eureka! The CD booted the iMac successfully! I
was able to do a clean install of the OS to upgrade it from 9.0 to 9.2,
restart the Mac; then upgrade its firmware..." -- may not be repeatable.
Anyway, hopefully you get more feedback on this and a resolution solution!

Source System Connection Issue after BI 7 Upgrade

Hi all,
We have just upgraded from BW 3.1 to BI 7.
After the upgrade, I checked the connection to our R3 4.6 source system.
It is now saying the following message:
Source system XXX is marked as inactive in BI.
Check failed for RFC connection XXX ; check destination
After going through the RFC connection, I tested the connection for this source system. It said OK. While doing the authorization test, it said: "Name or password is incorrect. Please re-enter".
The thing is that our name & password ARE correct definitely.
Is there any issues post upgrade because authorization stuff between R.3 4.6 (PI 2004.1 SP15) and BI 7?
Any ideas?
Thank you
chris

Hi,
as from NW7.0, passwords are case-sensitive.
If you define the passwords in the RFC in uppercase, it will work.
This is a problem when you link an 'old' (not NW 7.0) system to a NW 7.0 (as in this one, passwords are case-sensitive).

Trackpad Sensitivity Issue After Snow Leopard Upgrade

I have a Late 2008 MBP/2.53 Ghz and prefer to use tap to click/2 finger secondary tap.
After upgrading to Snow Leopard (to v.10.6.6 as a clean install), linked webpages and files/folders often open when a second finger touches the trackpad accidentally even when pressed very gently.
The same happens if a third finger touches the trackpad if I am scrolling through a page with 2 fingers. Sometimes when pausing/hovering over a link, part of the page surrounding the hyperlink will highlight and can sometimes the link will activate without any additional accidental touch. I have slowed down the tracking and double click speed in preferences, but this makes no difference.
The funny thing is, some days the problems are worse than other days, the trackpad seems to have a mind of it's own! These issues never happened with Leopard, and it is very frustrating.
Post SL upgrade, I have also noticed that the Magsafe adapter sometimes needs a little wiggle before it will start charging, and occasionally, the red 'close' symbol at the top left of the page does not always activate and I have to start tapping elsewhere before trying to close the page again.
My parents have SL installed natively on their MBP (Spring 2010), and their MBP does not encounter any of these problems.
Disk Utility shows Javavirtualmachine differences, which I trust can be ignored as the differences are non critical, or could these issues be having an effect on SL?
I have AppleCare which expires in November and I want this sorted out asap. I could just revert back to using Leopard, but as I have paid £30 for Snow Leopard it would be a waste of money.
I'm not sure whether my AppleCare cover these issues seeing as SL wasn't natively installed on the Mac when purchased?
If anyone can help with these issues it would be very much appreciated.
Many thanks

After installing SL, i cannot get wellsfargo "account login" to work for any account of mine, other financial secure sites work fine, i.e. fidelity or vanguard, I can access the main screen of wellsfargo but login fails ... screen i get says Safari can't connect to the server and as follows: "Safari can’t open the page “https://online.wellsfargo.com/das/cgi-bin/session.cgi?" plus some more gibberish stuff.... i tried switching to firefox and it works fine .... never had any trouble before ..... tried safari reset, safari empty cache, and maintenace that applied ...... still no luck!! hope they get this bug fixed , my other computer an older mac mini works fine. any help????? never had any problem before SL

Repository connect issue after MDM Patch Upgrade

MDM Expert
We recently upgraded our MDM patch from SP06 5.5.63.73 to SP06 5.5.65.91
after patch upgrade we are not able to connect to repository.SAP is saying that we have wong NLS Character set.It should be 'UTF8' or 'AL32UTF8'
We checked and found that we do not have character set as per SAP Recommendation but everything was working fine before upgrading the patch.As per SAP in new Patch MDM is lokking for Unicode Character set
SAP is asking to create new DB Instance for MDM.
If we create new instance for MDM then how we are going to use our existing repository.Our environment is clustered environment and name of MDM DB instance is also mentioned in cluster.We have to use same Instance name.We are also using oracle failsafe
Creating new instance seems to be risky for Production environment.Currently we are applying the Patch in Sandbox Environment
has anyone of you faced this problem while upgrading MDM patch, if yes then how you resolve the issue
Please help
Thanks
Deelip

Solution provided by sAP

HP Pavilion DV6 Sleep Mode Issue After Windows 10 Upgrade (Goes To Sleep After 2 Min Of Inactivity)

I recently upgraded my laptop from Windows 7 to Windows 10. The upgrade went smooth and everything appears to be running fine except for one anoying glitch. After approx. 2 min of inactivity my laptop atuomatically goes into sleep mode and logs me out. I have checked all my power settings/sleep settings/screen saver settings...etc and I have completed all the windows updates. I don't see any timers anywhere that require adjustment. Any help would be appreciated. Note: The laptop wakes up fine with no issues.

Hello Konacha, Thanks for posting on the HP Forums!I have read your thread regarding the computer entering sleep mode, upon Administrative prompts or a restart. There isn't a lot that could be done, but by the end of it, the issue should be resolved Hopefully, the simple fix is creating a new power plan. Your current power plan may be incorrectly configured. This Microsoft website can help with all the details of this task: Change, create, or delete a power plan (scheme) If that doesn't help, then personally, I would reinstall the operating system. This will fix it, as it will address any software conflict or virus that could be causing this. First, you should backup your data. I will provide information on how to do that: Backing Up Your Files (Windows 7) Once this is done, it is safe to do the System Recovery. Here is some information on how to do this: Performing an HP System Recovery (Windows 7) Please let me know if you have any other questions. Thanks again for posting, and have a great day! Mario

Issues after Windows 10 upgrade

Hi All, After upgrading to Windows 10, - The touchpad fails to work.- Unable to connect to Internet (Wireless/LAN).- Microphone/sound not working. Have tried installing the latest win 10 drivers from the Acer support website, still the issue persists. Any idea???

Howdy all, I have an acer w700 now running windows 10 pro, (upgraded from 8.1 pro). The only issue i found was that after upgrading, i would get the following error on booting the system; "Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.
The wait operation timed out. (Exception from HRESULT: 0x80070102)." i found a solution to resolve this; Go into your Task Scheduler (by using Windows search). The Task Scheduler runs applications according to a schedule. The MEMS application is crashing Windows 10 (since it is doing Windows 7 related things). In the Task Scheduler Manager, go to the Task Scheduler Library and find MEMS_Schedule. Right click on that line and left click on Disable. Now restart your computer. This is an Acer issue, and until Acer issues an update, the MEMS_Schedule needs to be kept disabled. If Acer ever gets around to issuing an update for this, then you can re-enable the MEMS_Sschedule, the same way as diasabling it. Other than this annoying issue, the W700 runs very well under Windows 10...........so far.............

Audio and video issue after Win 10 Upgrade - Split X2 laptop 64-bit

Any solution to the Audio and Video issues on Split X2 13" laptop after Windows 10 FREE Upgrade?? - Intel Core i5 processor- 4GB memory I'm sure others are have the same Audio/video problems: - there is Sound and video playback but the sound and video is repeated slowly forward....impossible to understand the audio. The video is clear but also being played in repeated frames as it moves slowly forward!- sounds coming out of the speakers ok - everything was working great on Windows 8.1 (before upgrading to Windows 10). there must be some kind of driver upgrade for IDT High Definition CODEC BEATS audio... is there a work-around until a real fix is provided?? Regards - VK

I have downloaded and installed the HP recommended IDT Audio Driver using the HP Assistant. The current installed IDT High Definition Audio CODEC driver is: STWRT64.sys 6.10.6498.0 The laptop was rebooted but the problem still the same.....Audio is garbeled and impossible to understand the words...video seems ok when playing Youtube videos. My Split 13 X2 product id is: E2S66AV BIOS F.27

Exporting issues after 4.2 upgrade

Similar Messages

Maybe you are looking for