Bounced tracks play too fast in iTunes

This is a continuation of an old thread that was never resolved:
http://discussions.apple.com/thread.jspa?threadID=853393
Basically, nothing has changed. I can bounce my tracks from Logic, and they play fine everywhere except iTunes, where they play too fast. I can play them on my iPod in the car and everything works at normal speed.
All my iTunes tracks (including the ones bounced from Logic) share the following characteristics:
192 kbps
44.1 kHz
Profile: Low Complexity
However, the Logic tracks play fast, whereas everything else plays normally.
I have a standard G5 sound card, not a 3rd party one.
I'm about to conclude that this is a standard limitation with Logic, that tracks created there cannot be listened to at regular speed in iTunes. Is that a known issue? Is this limitation by design?

Sorry for the slow reply. Yes, that is the problem I'm having, and it's so weird, I thought maybe there was some wacky glitch in the program. Logic is not without its bizarre idiosyncrasies, as you've probably noticed yourself.
Check this out for bizarre: I've bounced these tunes down to my iPod, where I can listen to them over headphones, in my car, etc, with the tracks playing at the right speed. However, if I plug that same ipod into my home stereo in the living room (where the laptop is also plugged in), and play those same tracks, they play too fast. I know, it doesn't make sense. But I'm not imagining it. It's completely crazy.
In Audio Midi Setup my audio output is set for 44.1khz.
Anyhow, the problem is less consistent these days. That is, sometimes I can bounce a track down and it plays right. Othertimes, not. I still haven't found the common denominator to this problem, but if I discover anything, I'll post it here.

Similar Messages

When i record the track plays too fast

when i record the track plays fast and when i pause it and press play it play normal but when i press record it starts playing squeeky and faster?? any one can help

What audio interface are you using with Audition? Make sure all Windows Sounds are turned off because otherwise Windows may grab the soundcard and change the sample rate without you knowing.
Yes upgrade route/price to AA3 is available for any previous version of Audition.
https://store5.adobe.com/cfusion/store/index.cfm?&store=OLS-UK&view=ols_prod&category=/App lications/Audition&distributionMethod=UPGRADE&nr=0#store=OLS-UK&view=ols_prod&loc=en_gb&ca tegory=/Applications/Audition

Music/audio plays too fast

using a new laptop (this compaq) and installed itunes. All music/audio, whether from a CD, or itunes or the audio from a website, plays too fast. I've tried lots of things -found a page in the support section (tried all except the driver thing) -- ANY THOUGHTS?? THis is driving me crazy and can't do anything w/ my ipod except listen to what's already on there!

You may want to check your soundcard output in QuickTime. See this post for directions on the process: http://discussions.apple.com/message.jspa;jsessionid=aXxb7IZbMDPmI_4E?messageID=814726&ft=y&#814726
And this Article: iTunes and QuickTime for Windows: Songs and other audio don't play correctly
And before you do any of the above, make sure that you have all the recent Windows Updates from windowsupdate.com. Make sure you have the latest drivers for your particular sound card, and make sure you have the latest DirectX installed. Any of these could also cause this problem without QuickTime being the culprit.

Music plays too fast-help!

I have downloaded itunes to my Compaq laptop and all music plays too fast. I don't think it's an itunes problem, i think it's something i need to adjust on the laptop, but I can't figure out what to adjust. Any thoughts?

Hi- thanks for the direction.. unfortunatey, same problem but no answers there on that link that I could see.. Also, i'm not recording my voice but am plugging in MP3 songs. Any other ideas?

FLV inserted to page no probs but plays too fast!

I've used the Insert Flash Video feature on dreamweaver 8 to
add a video clip to one of my family web pages
www.nzgreens.me.uk/house
It has up loaded and plays, but is far too fast.
We've moved to New Zealand and it's for our family and
friends in the UK to view. Please please please can someone tell me
why it would be playing too fast?

Green Kiwi wrote:
> Could be. I used a piece of free software from
1and1.co.uk (they host my site)
> its called Prism Video Converter. Never used it before
but was very simple. So
> simple that it never even talked about encoding.
>
> I do have flash 8, but I've only had it about a week and
don't really know
> what I'm doing. I know that it can convert video into
FLV format. Do you think
> I should try converting it through Flash 8 instead?
I think you should give it ago, the Flash Encoder is straight
forward
from what I remember.
Steve

How can I fix corrupted audiobooks category--plays too fast and is gravelly?

How can I fix corrupted audiobooks category--plays too fast and is gravelly? Other music categories are unaffected..

On the audio book (and podcast) playing screen there is a playback speed selector. It is the box on the right hand side of the screen right below the scrubber bar. It say either 1/2X, 1X or 2X, the playback speeds. Tap the box to cycle through the playback speeds.

Videos play too fast on ipad - sounds like super high speed mini mouse

We just bought the ipad and when we play videos on vimeo or youtube they play at an ultra high speed like the fps is messed up - it sounds like a record being played too fast
Is this our ipad or a setting - we are worried because we do not see the problem listed anywhere else.
Thanks!

Have your rebooted/restarted your iPad? you do that by pressing the Home and power/sleep button at the same time until the slider to power off the iPad appears. Slide the slider and when screen activity stops depress the two buttons again until the Apple logo appears. When the iPad completes rebooting try again to see if that solved your problem.

My podcasts play too fast in my iphone

I did not had a problem before but now with the same podcasts I use to listen to they play too fast. You can still understand them but it is not pleasant at all. Does anyone has the same problem and was able to solve it?

It's likely you accidentally touched the button that speeds up playback to 1.5x.

FLV sometimes plays too fast

Hi,
Can any one help how to resolve the issue some flvs play too fast but same flvs play normal most of the time. I am using NetStream class to play the flv.
here is play method I am using and link of demo and entire source.
private function play():void
if(btnPP.label == "Play"){
stream.resume();
else
stream.pause();
Please see this link : http://ec202.classicinformatics.com/demo/cropper/
Thanks in advance,
Prem

Green Kiwi wrote:
> Could be. I used a piece of free software from
1and1.co.uk (they host my site)
> its called Prism Video Converter. Never used it before
but was very simple. So
> simple that it never even talked about encoding.
>
> I do have flash 8, but I've only had it about a week and
don't really know
> what I'm doing. I know that it can convert video into
FLV format. Do you think
> I should try converting it through Flash 8 instead?
I think you should give it ago, the Flash Encoder is straight
forward
from what I remember.
Steve

Microsoft 2000 OS, all videos playing too fast, what to do?

Have MS 2000 Professional OS
All online streaming videos (like youtube) playing too fast, extremely annoying rushing "chipmunk" effect.

Word is getting around on the internet that Apple has basically stopped monitoring and moderating these forums. Expect to see this sort of thing increasing. If Apple isn't going to keep a lid on trolling like this then they had better just shut the forums down. It won't take long for these forums to be totally overrun by Mac bashers, trolls, and Windows fanboys. There's something about the Mac that scares them and makes them feel insecure.

Audio book plays too fast on the ipad - how do i fix it?

audio book plays too fast on the ipad - how do i fix it?

While I don't listen to audiobooks on myh iPad, the following might apply in your case:
When you navigate to the player controls in the iPod app, in older OS's, and perhaps still in the Music app in iOS 5, you will see a variable speed control on the right hand side of the scrubber bar. Sequential taps on that change the speeds.
This does appear in spoken content only, I think, as I see it in podcasts all the time. It's not there for video or music content, so I'd expect it to appear for Audiobooks as well.

Streaming audio plays too fast on car stereo

Streaming audio plays too fast on car stereo with iPhone 4S

how do you play it on the car stereo?
because if it's using the 3.5mm headset connector or even the analog out from the pin30 then it's
100% the same sound output from the phone as it provide a headset

Video playing too fast

Don't know if anyone else has this problem but for some reason I was and I seemed to find a weird work around. I had an AVI, divx codec, ac3 audio that the video was playing WAY too fast but the audio was fine. Well, seems that Quicktime is getting the frame rate screwed up and when I opened it, if I immediately to to "Movie Properties" to look at the frame rate it will play fine. If I try to play it and then look at the properties it won't play right. Almost as if it has to find out what the frame rate is at the beginning. Very weird but a bit of a work around for now. Hopefully this will be fixed. It was using Perian to play it.

I have experienced a similar quirk, with several different videos, including .m4v clips that I have downloaded or created myself. The problem doesn't occur when previewing the movies in the Finder, nor when playing them in iTunes. However, if I open the files with QuickTime, the video plays faster than normal, but the soundtrack plays at the original rate! I tried your solution of opening the Movie's Properties first, and it does seem to work. Of course, this is only a workaround for now. Obviously, something needs to be tweeked in Leopard or Quicktime —most likely both— to eliminate the quirk entirely. I am very surprised by this problem because one would think that Apple's own software products would be more compatible than third-party programs! Yow...!

Sound stream played too fast

hello,
i'm trying to stream audio byte[] data over multicast network (UDP). on the receiving end, the sample is played way too fast. CMIIW, this has nothing to do with networking stuff, but an audio playback problem. can someone give a hint?
here's the server code
* VoiceOverNetwork.java
* Created on July 6, 2006, 9:05 PM
package org.klorofil.test.app.voice;
import java.io.PipedInputStream;
import java.io.PipedOutputStream;
import java.util.HashMap;
import javax.sound.sampled.AudioInputStream;
import javax.sound.sampled.AudioSystem;
import javax.sound.sampled.SourceDataLine;
import org.jgroups.JChannel;
import org.jgroups.Message;
import org.klorofil.app.vchat.VChatGroupLogic;
import org.klorofil.test.util.Util;
* @author bungrudi
public class VoiceOverNetwork {
        protected static volatile boolean       stop    = false;
        public static void main(String[] args) throws Exception {
                String props = "UDP(mcast_addr=224.10.10.10;mcast_port=54321;ip_ttl=32):"+
                                    "PING(timeout=2000;num_initial_members=1):" +
                                    "MERGE2(min_interval=5000;max_interval=10000):" +
                                    "FD_SOCK:" +
                                    "VERIFY_SUSPECT(timeout=1000):" +
                                    "pbcast.NAKACK(max_xmit_size=8096;gc_lag=50;retransmit_timeout=600,1200,2400,4800):" +
                                    "UNICAST(timeout=600,1200,2400,4800):" +
                                    "pbcast.STABLE(desired_avg_gossip=20000):" +
                                    "FRAG(frag_size=8096;down_thread=false;up_thread=false):" +
                                    "pbcast.GMS(join_timeout=5000;join_retry_timeout=2000;" +
                                    "shun=false;print_local_addr=true):"+
                                    "VIEW_ENFORCER:"+
                                    "pbcast.STATE_TRANSFER";
                final JChannel          channel = new JChannel(props);
                channel.connect("voicetest");
                final SourceDataLine    line = (SourceDataLine) AudioSystem.getLine(VChatGroupLogic.sourceLineInfo);
                line.open(VChatGroupLogic.audioFormat);
                line.start();
                final PipedInputStream        pis = new PipedInputStream();
                final PipedOutputStream       pos = new PipedOutputStream(pis);
                Runnable                run = new Runnable() {
                        public void run() {
                                try {
                                        Object obj = null;
                                        while(!stop) {
                                                obj     = channel.receive(0);
                                                if(obj != null && obj instanceof Message) {
                                                        //System.out.println("data...");
                                                        Message m = (Message) obj;
                                                        byte[] buffer = m.getBuffer();
                                                        pos.write(buffer,0,buffer.length);
                                } catch (Exception ex) {
                                        ex.printStackTrace();
                Thread t       = new Thread(run);
                t.start();
                Runnable                run2 = new Runnable() {
                        public void run() {
                                try {
                                        AudioInputStream        ais = new AudioInputStream(pis,VChatGroupLogic.audioFormat,-1);
                                        AudioInputStream        ais2 = AudioSystem.getAudioInputStream(VChatGroupLogic.audioFormat,ais);
                                        byte[] buffer = new byte[21120];
                                        int     nBytesRead = 0;
                                        while(!stop && nBytesRead!=-1) {
                                                nBytesRead      = ais2.read(buffer,0,buffer.length);
                                                line.write(buffer,0,nBytesRead);
                                } catch (Exception ex) {
                                        ex.printStackTrace();
                Thread t2       = new Thread(run2);
                t2.start();
                // dispatch client thread.
                String[] ars = new String[] {"java",
                                "-Djava.net.preferIPv4Stack=true",
                                "-Dlog4j.configuration=META-INF/log4j.properties",
                                "org.klorofil.test.app.voice.VoiceOverNetworkClient",
                                "parto"};
                HashMap env = new HashMap();
                env.put("CLASSPATH",System.getProperty("java.class.path"));
                Util.ProcessDescriptor d1 = Util.runner(ars,env,"OUTPUT parto","ERROR parto");
                d1.process.waitFor();
                Thread.currentThread().sleep(5000);
                // done
                stop    = true;
                t.interrupt();
                t2.interrupt();
}and heres the client
* VoiceOverNetworkClient.java
* Created on July 6, 2006, 9:16 PM
package org.klorofil.test.app.voice;
import java.io.File;
import java.io.IOException;
import javax.sound.sampled.AudioInputStream;
import javax.sound.sampled.AudioSystem;
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
import org.jgroups.ChannelClosedException;
import org.jgroups.ChannelNotConnectedException;
import org.jgroups.JChannel;
import org.jgroups.Message;
import org.klorofil.unstable.BytesWrapper;
* @author bungrudi
public class VoiceOverNetworkClient {
        private static final Log        log    = LogFactory.getLog(VoiceOverNetworkClient.class);
        public static void main(String[] args) throws Exception {
                log.info("Client started...");
                String props = "UDP(mcast_addr=224.10.10.10;mcast_port=54321;ip_ttl=32):"+
                            "PING(timeout=2000;num_initial_members=1):" +
                            "MERGE2(min_interval=5000;max_interval=10000):" +
                            "FD_SOCK:" +
                            "VERIFY_SUSPECT(timeout=1000):" +
                            "pbcast.NAKACK(max_xmit_size=8096;gc_lag=50;retransmit_timeout=600,1200,2400,4800):" +
                            "UNICAST(timeout=600,1200,2400,4800):" +
                            "pbcast.STABLE(desired_avg_gossip=20000):" +
                            "FRAG(frag_size=8096;down_thread=false;up_thread=false):" +
                            "pbcast.GMS(join_timeout=5000;join_retry_timeout=2000;" +
                            "shun=false;print_local_addr=true):"+
                            "VIEW_ENFORCER:"+
                            "pbcast.STATE_TRANSFER";
                final JChannel          channel = new JChannel(props);
                channel.connect("voicetest");
                File file = new File("/windows/C/WINDOWS/Media/Windows XP Shutdown.wav");
                final AudioInputStream        audioInput = AudioSystem.getAudioInputStream(file);
                Runnable        run = new Runnable() {
                        public void run() {
                                try {
                                        log.info("sending audio data...");
                                        byte[]          buffer = new byte[24000];
                                        int             nBytesRead = 0;
                                        int             totalRead = 0;
                                        while(nBytesRead != -1) {
                                                nBytesRead      = audioInput.read(buffer,0,buffer.length);
                                                if(nBytesRead > 0) {
                                                        System.out.println("sending...");
                                                        //BytesWrapper bw = new BytesWrapper();
                                                        //bw.bytes        = buffer;
                                                        //bw.amount       = nBytesRead;
                                                        //Streamable m = Util.streamableFromByteBuffer(Streamable.class,buffer);
                                                        Message m = new Message(null,null,buffer,0,nBytesRead);
                                                        channel.send(m);
                                                        totalRead += nBytesRead;
                                        log.info("Total data read "+totalRead+" bytes.");
                                } catch (Exception ex) {
                                        ex.printStackTrace();
                Thread t = new Thread(run);
                t.start();
                while(t.isAlive());
}any help appreciated

I found a workaround. Start the game outside of steam, and all is well. You do have to have steam running, but start the game from the command line like this:
cd ~/.steam/root/SteamApps/common/Half-Life
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:. ./hl_linux -game valve
Also, to use alsa insteam of pulse, before the above, do:
export SDL_AUDIODRIVER=alsa

Music tempo too fast in Itunes

Hello
Just re-transfered all songs from backed up image to new hd
all the songs are there in Itunes but the tempo is too fast when you listne to them!
Any way to solve this?
Re-installing?
thanks

Have you tried the following article which covers problems with playback speed:
http://docs.info.apple.com/article.html?artnum=93610
Of course, if you are using WIndows 2000 you can't update to the latest version of iTunes - this is the latest version that will work:
http://www.apple.com/support/downloads/itunes732forwindows2000.html

Bounced tracks play too fast in iTunes

Similar Messages

Maybe you are looking for