BP CREATION : Initial Dowload of Customers

Hi,
While downloading a customer of account groups 'ship-to' from R/3 mapped to classification 'customer' in CRM it creates a BP with multiple role like 'sold-to', 'ship-to', 'payer'. Can I restrict BP creation to orginal role of R/3.
Regards,
Srini

Hi Tiest,
Could you explain it bit more? I am trying to initial download Business partners. I can download sold to, ship to, sales person. They download without any problem but there is no relationship created between them?
Appreciate your help.
Thanks!

Similar Messages

  • Initial Load of customers stopped

    Hello,
    I started download of customer_main in CRM 4.0 and as a sales group couldn´t be found (which is also deleted in R3, but still to find in customer masters; also R3 gives an error if you go into VD02 because of this) an BDOC was generated, what is quite ok.
    BUT - the problem is that the initial load was stopped completely.
    In Rel. 3.0 we got also BDoc for errors BUT the download always finished. So afterwards errors were cleaned up.
    Has somebody an idea whether this is normal behaviour in Rel.4.0 or what I can maybe do that download runs further after stop?
    I´d be happy if I´d get some hints.
    Kind regards
    Christina

    Hello,
    it´s difficult to filter out customers as I don´t know upfront which one run into error, as I don´t know which sales group, offices have been deleted in R3 and are still existing in customer master.
    We found note 823594 and it seems that with this the check of sales group+offices is simply ignored, what means the initial load will run through smoothly.
    Problem can be that you get no BDOC anymore if a saes group is missing and then inconsistency of systems increase.
    The error message was
    "CRM_BUPA_MAPPING_30110 - No CRM sales office can be determined fr R3 sales group THS".
    So the error shows what to do basically. But why the whole download is stopping is not clear.
    If someboy knows about please reply on this.
    Kind regards
    Christina

  • No initial load of Customers, Material and delta load of Sales Orders.

    Hi Experts,
    I am facing a very troublesome issue. I am not able to setup the Middleware portion for initial and delta loads. I read a lot of documents and corrected a lot of things. finally, the connectivity is done with R/3 and CRM. Initial load of all objects is successful (as per Best PRactices guide). Customizing load is successful.
    But after now I have these open issues for which I am unable to find any answers (am really exhausted!!):
    - Customer_main load, it was succesful, but no BP's of R/3 are available.
    - Material, it failed in SMW01, SMQ2, the errors are:
    Mat. for Initial Download: Function table not supported
    EAN xxxxxxxxxxxxxxxxxx does not correspond to the GTIN format and cannot be transferred
    EAN yyyyyyyyyyyyyyyyyy does not correspond to the GTIN format and cannot be transferred
    Plant xx is not assigned to a business partner
    - Sales order, it shows green bdoc, but error segments says "No upload to R/3" and the order does not flow to R/3.
    We had our system setup 3 years back for data transfer and Middleware. But few things changed and connectivity stopped. I did all that again now, but am not yet successful. Any inputs will be greatly appreciated.
    Thanks,
    -Pat

    Hi Ashvin,
    The error messages in SMW01 for MAterial initial load is :
         Mat. for Initial Download: Function table not supported
         EAN 123456789000562 does not correspond to the GTIN format and cannot be transferred
         EAN 900033056531434 does not correspond to the GTIN format and cannot be transferred
         Plant 21 is not assigned to a business partner
    I have done the DNL_PLANT load successfully. Why then the plant error?
    Some of the messages for BP:
    Messages for business partner 1331:
    No classification is assigned to business partner 1331
    For another,
         Partner 00001872(469206A60E5F61C6E10000009F70045E): the following errors occurred
         City Atlanta does not exist in country US
         Time zone EST_NA does not exist
         You are not allowed to enter a tax jurisdiction code for country US
         Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
    Now, the time zone EST is assigned by default in R/3. Where do I change that? I do not want to change time zones as this may have other impacts. Maybe CRM I cna change this, not for sure in R/3. City check has been deactivated in R/3 and CRM, still the error.
    Till these 2 are not solved, I cannot go into the Sales order loads.
    Any ideas will be greatly appreciated.
    Thanks,
    -Pat

  • Initial Load of Customers as Persons?

    Hello,
    does anyone know, whether it is possible to download some customers from R/3 to CRM as persons instead of organizations.
    The background is, that we have debtors who are persons, not organizations.
    As R/3 does not differ between Org's and Persons, but CRM does, I suppose there must be a solution for this common situation.
    Thanks in advance for your help. Points will be rewarded.
    Regards
    Birgit Selle

    Hello Naveen,
    thanks for that information but unfortunately I don't know in which context I have to call that BAPI. Is there a user exit?
    Perhaps I did not post my question precisely enough. So I try to ask again.
    In the pide I can assign a classification (1 of 5 possibilities) to the relevant account group. I can choose between:  A: Consumer Organization, B: Customer, C: Sales Prospect, D: Competitors and E: Consumer Person. So I choose classification B: Customer. But that means that the customers will automatically be created as organizations in CRM. But I would expect the system to offer me the possibility to choose between Person and Organization as it happens with classification A and E for consumers.
    Thanks
    Birgit

  • Initial dowload problem Middleware

    Hi!
    I have a problem with initial download on TST system. There were no problems on DEV system. Repliaction for DNL_CUST_ACGRPB is in status running (nothing stops in smq1/2, no problems in st22). I've tried to replicate other object but I have the same problem.
    I have done:
    - registered queue
    - CRMCONSUM
    - TBE11
    - CRMRFCPAR
    - CRMPAROLTP
    - add new sites
    - R3PRODHIER and COMCPRFORMAT
    ERP TST is a copy of DEV. Maybe this is the reason? CRM TST is regular instalation
    Please help
    regards
    Piotr

    Hi Paul Kondaveeti,
    I am facing the same problem.Would be great if you could help me.
    I am trying to do initial download for DNL_CUST_PROD1 from ERP to CRM.
    The monitor says the download is done but the relevant tables are not populated.
    How do we compare that the GUIDs match. CRMRFCPAR on ERP matches with the CRM Site attributes in smoeac on CRM.
    CRMPRLS on ERP matches with CRMMLSGUID on CRM.
    Is there anything else i need to look out for.
    I did apply note you mentioned earlier for outbound queue on ERP giving an error ' logical system has changed'. Now that seems to be solved.
    Can you please help with this situation.
    I have also tried download request with table T023, but the same problem. Nothing in the queues ..but the monitor says successful , nothing is downloaded into the table T023 in CRM, but there are entires in ERP.
    Site attributes : CRM ( RFC connection to CRM system )
                           ERP ( RFC connection to ERP system )
    Regards,
    Pratima

  • I need help with the initial dowload/set up with itunes on my PC w/Windows

    itunes is not recognizing or insync with my itunes account which I have created...I am getting a meesage to create an account and Error msg 11222

    Welcome kimmyak.
    You'll get more responses if you post your question in the Using iTunes for Windows forum. Good luck!

  • Item Category Determination during Sales Order Creation

    Dear All,
    This is Chee Wee, i'm new to SD, i would like to seek for an advice for the topic related to Item Category in Sales Order.
    We have a material "Mat005" define as "Stocked" Item category in MM03,
    *Stocked means our MM team will always keep stock for the material.
    The document Item category assigned to this "Stocked" are "NoPo" --> No Auto Po creation and "AuPO" --> AutoPo  creation.
    During the SO creation for Mat005 with Qty50 and warehouse stock availale for 60, i'm wondering when i select the itemCat "AuPO", the system automatic changed to "NoPO", but when i change the order qty to 70, then i'm able to changed the itemcat to "AuPo"!!
    Can any Guru advice me what is the actual setting or configuration behind to determine which are the correct Item Category that i can choose?
    Thank you very much,
    Regards,
    Chee Wee

    Dear Chee Wee,
    Basically tem category will determine based on these key combination
    Item category group(Material master)+Sales document type(We enter doc type in the creation initial screen)--->Item category
    For Example NORM+OR--->TAN.
    As per your explanation
    I hope In your case stock availability also one of the factor in the item category determination.This might have done some enhancement.
    There are two item categories in your process one is  "NoPo" --> No Auto Po creation and  second one is "AuPO" --> AutoPo creation.
    the system automatic changed to "NoPO", but when i change the order qty to 70, then i'm able to changed the itemcat to "AuPo"!!
    60 Qty Stock available, you have created sales order for 50 Qt here requirement is less than stock availability so system will not allow you to enter AuPo item category Because there no need of auto PO creation for stock.
    When you created sales order for 70 Qty, stock available only 60 so there is shortage of 10 Qty.now system needs to allow to create Auto PO to procure the shortage stock of 10 Qty, so system is allowing you to enter Yaupon item category.
    There might be some work around kind take help of ABAPer to get the more details about your item category determination.
    I hope this will help you,
    Regards,
    Murali.

  • Replicating data once again to CRM after initial load fails for few records

    My question (to put it simply):
    We performed an initial load for customers and some records error out in CRM due to invalid data in R/3. How do we get the data into CRM after fixing the errors in R/3?
    Detailed information:
    This is a follow up question to the one posted here.
    Can we turn off email validation during BP replication ?
    We are doing an initial load of customers from R/3 to CRM, and those customers with invalid email address in R/3 error out and show up in SMW01 as having an invalid email address.
    If we decide to fix the email address errors on R/3, these customers should then be replicated to CRM automatically, right? (since the deltas for customers are already active) The delta replication takes place, but, then we get this error message "Business Partner with GUID 'XXXX...' does not exist".
    We ran the program ZREPAIR_CRMKUNNR provided by SAP to clear out any inconsistent data in the intermediate tables CRMKUNNR and CRM_BUT_CUSTNO, and then tried the delta load again. It still didn't seem to go through.
    Any ideas how to resolve this issue?
    Thanks in advance.
    Max

    Subramaniyan/Frederic,
    We already performed an initial load of customers from R/3 to CRM. We had 30,330 records in R/3 and 30,300 of them have come over to CRM in the initial load. The remaining 30 show BDOC errors due to invalid email address.
    I checked the delta load (R3AC4) and it is active for customers. Any changes I make for customers already in CRM come through successfully.  When I make changes to customers with an invalid email address, the delta gets triggered and data come through to CRM, and I get the BDOC error "BP with GUID XXX... does not exist"
    When I do a request load for that specific customer, it stays in "Wait" state forever in "Monitor Requests"
    No, the DIMA did not help Frederic. I did follow the same steps you had mentioned in the other thread, but it just doesn't seem to run. I am going to open an OSS message with SAP for it. I'll update the other thread.
    Thanks,
    Max

  • Transaction variant durign creation of sales order.

    I have a scenario Sale area is R001/10/10 and is applicable for all the customer in all india.
    Now the requirement is to incase of sell order creation to only the customers at UP it will be made mandatory to put cheque number in the sales order otherwise the order will not solved.
    The same will be applicable only for up customer not to other customers.
    Now the problem is if i want to added some field in incompletion procedure and assign to the order type it will not solve my problem.
    Becasue OR is assign to R001/10/10 and sell happens from hyderabad, bangalore as well as up also. and this control only require in case of sell to up customers only. If i will assign the incomplition procedure to order type it will be applicable to all.
    So it was suggested by anybody to creat transaction variant during sales order creation. Can anybody tell me the way to creat or any other suggestions.
    The right answar will be rewarded.
    Thanks.
    Laxmikanta Das.
    09958119889

    Hi
    If you donot find any other alternative, you can finally go for using the Userexit. When the sales order is created and before saving the document, the system checks for the field -State/Region etc., and if the value is UP then it checks for the Check Number in that corresponding field. You have to mention the systems reaction(warning or error) if there is no value in that field.
    Thanks,
    Ravi

  • Best way to subscribe multiple customers to list?

    Question:
    I have a straight forward task ahead of me. I need to subscribe roughly 100 existing customers to a new email mailing list. What's the best way to do this in BC? When i say existing customers I mean they are in the BC system already, so I don't want to export and then re-import those customers.
    Answer:
    You cna use Customer reports for that. Create a report of those customers and filter it according to your needs, then on the second last step of report creation click on Add Customers To button and choose a marketing list you wish to add them to.

    I would use a Map<String, Set> or Map<String, List> (using Java 5 generics notation here to show clearly what is in the map, but using generics is not required).
    The keys in the map are the company names, the values are Sets or Lists of brand names.
    This snippet will get keys and values from a Map called companyBrandsMap:<c:forEach var="mapElement" items="${companyBrandsMap}">
       Company: <c:out value="${mapElement.key}"/><br>
       Brands:<c:forEach var="listElement" items="${mapElement.value}">
         <c:out value="${listElement}"/><br>
       </c:forEach><br>
    </c:forEach>This code just prints the values, you can put your JavaScript code around that.

  • Initial download problem by DNL_CUST_TXJCD

    Hi all,
    we are trying do dowload customizig Tax Jurisdiction Codes from ERP to CRM. We are using standard object  DNL_CUST_TXJCD. Wen we run R3AS everything sems good, no error message. But nothing was dowloaded at all . RFC works well. ERP SQM1 is empty and CRM SMQ2 is also empty. No BDoc was generated. By initial dowload a standard is used FM CRM_TAXJURCODE_FILL. This FM should fill in tables in CRM. But wen we set breakpoint, we could'n get in. Seems as the FM was not used at all.
    Any suggestion ?
    Thanks for reply.
    Jan.

    Hi Jan,
    One possible reason can be the missing entry in table CRMATAB.
    Please see note
    1881008 - "The current application triggered a termination with a short
    dump" in CRM SMQ1
    and the referenced notes.
    Best regards - Christophe

  • Initial download of CUSTOMER_MAIN

    Hi
    We are performing initial download of Customers from ECC To CRM.
    We set filters on CUSTOMER_MAIN Object and performed the initial download.
    Due to the filters, none of the customers downloaded into the CRM System as all customers got filtered out.
    Now we deleted some of the filters from the CUSTOMER_MAIN Object and tried to perform the initial download. but still no customers are downloading into CRM.
    Can anybody provide us with help.
    Thanks in Advance
    Regards
    Rekha Dadwal-Shet

    Hi Rekha,
    Did you find any solution on your issue? I am facing the same problem.
    I would appreciate if you can share your solution.
    Thanks,

  • Initial download of CUSTOMER

    Hi Gurus,
    we're performing the initial download of customers from ERP to CRM systems, but we're facing a problem.
    The problem is that some customers in ERP doesn't have the postal code and so the BDocs are in error.
    We have mapped the postal code as Optional in customizing (CRM - Cross Application components - SAP Business Partner - Business Partner - Basic Settings - Field Groupings - Configure field attributes per BP role), but when we create a request for customers the BDocs retrieve us the same message.
    How can we get it? Is there any other setting to do in order to solve the problem?
    Thanks a lot,
    best regards,
    Andrea

    Hi
    for VAT Registration No. use this BAdi
    To Add VAT Registration Number
    You can create a tax number for a business partner with this method.
    The BAPI BAPI_BUPA_TAX_ADD must be used.
    To Change VAT Registration Number
    You can change the tax number for a business partner with this method.
    The BAPI BAPI_BUPA_TAX_CHANGE must be used.
    To  Delete VAT Registration Number
    You can delete the tax number for a business partner with this method.
    The BAPI BAPI_BUPA_TAX_REMOVE must be used.
    This method is optional for certification.
    Reward Points ifhelps
    hope it helps
    Regards
    Manohar

  • Is Adobe stealing old software from its customers?

    I'd like to know if anyone has had this experience.  Yesterday I went to my download file and downloaded a file from Adobe, assuming that it was an update.  The download immediately deinstralled my Adobe Elements 9.  It wasn't malware.  Adobe just ripped off from me what I had bought and paid for.  My suspicion is that this is a company-wide initiative to steal customers software so that it can sell them the cloud.  I called customer service and they told me they would never do such a thing, that a customer service rep would call in 20 minutes.  No call.  I think Adobe has fallen into the moral toilet.

    Hi Jack, sorry to hear this.
    But I would like to inform you that Elements is no way related to Creative Cloud as its not part of it.
    Kindly let us know what file you downloaded that uninstalled your Elements 9.
    Incase you want to download Elements 9 again, check here : http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
    Make sure you follow the steps before you begin download

  • Best Practices for FSCM Multiple systems scenario

    Hi guys,
    We have a scenario to implement FSCM credit, collections and dispute management solution for our landscape comprising the following:
    a 4.6c system
    a 4.7 system
    an ECC 5 system
    2 ECC6 systems
    I have documented my design, but would like to double check and rob minds with colleagues regarding the following areas/questions.
    Business partner replication and synchronization: what is the best practice for the initial replication of customers in each of the different systems to business partners in the FSCM system? (a) for the initial creation, and (b) for on-going synchronization of new customers and changes to existing customers?
    Credit Management: what is the best practice for update of exposures from SD and FI-AR from each of the different systems? Should this be real-time for each transaction from SD and AR  (synchronous) or periodic, say once a day? (assuming we can control this in the BADI)
    Is there any particular point to note in dispute management?
    Any other general note regarding this scenario?
    Thanks in advance. Comments appreciated.

    Hi,
    I guess when you've the informations that the SAP can read and take some action, has to be asynchronous (from non-SAP to FSCM);
    But when the credit analysis is done by non-SAP and like an 'Experian', SAP send the informations with invoices paid and not paid and this non-SAP group give a rate for this customer. All banks and big companies in the world does the same. And for this, you've the synchronous interface. This interface will updated the FSCM-CR (Credit), blocking or not the vendor, decreasing or increasing them limit amount to buy.
    So, for these 1.000 sales orders, you'll have to think with PI in how to create an interface for this volume? What parameters SAP does has to check? There's an time interval to receive and send back? Will be a synchronous or asynchronous?
    Contact your PI to help think in this information exchange.
    Am I clear in your question?
    JPA

Maybe you are looking for