BPC 10.0 - New user - SAP_BPC_USER & SAP_BPC_SERVICE needed?

Dear All,
For BPC 10.0, when creating a new user for the first time( no other authorization except just login), apart from the following two roles at the BW end:
/POA/BUI_FLEX_CLIENT
/POA/BUI_UM_USER
do we need to give the following as well at the BW end?
SAP_BPC_USER
SAP_BPC_SERVICE
If so, why?
Thanks,
Peri

Peri,
In addition to the first two roles, SAP_BPC_USER role has the check for RFC Access. You can make a copy of that and use it.Otherwise the two roles are good.
SAP_BPC_SERVICE role is a reference role and by standard it is assigned to the user id BPC_SERVICE which is equivalent to BWBATCH user id in BW. No need to assign this role to any user.
If the user want to process dimensions and do stuffs in the Web Client they need to have the access provided in SAP_BPC_ADMIN, you can go over this standard role and give the necessary authorization to the users by making a copy of it.
Hope this helps...

Similar Messages

I'm a very new user and I need some help!

I have recently started a new job and our website is managed through Dreamweaver, which I know nothing about. I was getting along until I was given a new computer. We installed a new version of Dreamweaver and when I launched it for the first time I was expecting to be able to see the local and remote sites, the way I could on the old computer. However, the remote site was not available. Please forgive my ignorance, and I did hunt for this info in the tutorials etc, but if I am communicating with the remote site, shouldn't all those files be listed without me having to put them there?

I did try. Alot of what I found dealt with creating pages and templates, which I will need soon, but not yet. I found the link below. It looked promising, but didn't end up relating to any option I could see for myself to try. I have tested my connection already so I believe I entered all the ftp information correctly.
Open and edit existing documentsYou can open an existing web page or text-based document, whether or not it was created in Dreamweaver, and edit it in either Design view or Code view.'

New user of G4 - need advice on selection of printer, DV and digital camera

I am a recent convert to mac and need advice from experts on the following:
I plan to use my G4 MDD primarily for home computing, experimenting with digital photography, create DVDs and explore multimedia primarily as a hobby. Please advice me on selection of a decent digital camera and or a DV camera. I am not sure if I have a decent DV camera - whether this will be good enough for still photos as well. My G4 has firewire ports.
Also I am interested in buying a printer that I can use with my mac as well as connect to a two other windows systems. My printing needs are primarily documents and maybe photos.. I think that going in for a laser printer makes sense in terms of reliability .
I am not looking for the highend equipment - willing to spend upto 750 $ on all items. Thanks in advance.

raja,
welcome to discussions.
Digital Camera, DV camera and colour Laser Printer all for $750 ??
I'm afraid you'll have to go for an inkjet printer if you want colour photos. Expensive doesn't even begin to describe Colour Laser Printers. HP make good printers, but tend to be a bit more expensive to run, Epson make excellent photo printers, are are a bit more economical to run, take a look at the iP4000 and iP5000. I still use my old HP DeskJet 1200 (does A3), and a DeskJet 970Cxi (everyday), both use the same cartidges. These are about 7 years old, there are modern versions retailing now at about half of what I paid for these then(always the case).
Digital cameras can be decided by what purpose you intend to use them for. I have an 18 month old Nikon D100 digital SLR. 6M pixel (which was a lot then) but that might not matter, it takes Nikon lenses (and other manufacturer lenses to the same spec), so I can shoot with a 300mm, 400mm, 600mm lens. Nikon has a D50 out now, a cheaper, newer version of my camera. I can print A3 photo real from 6M pixels and with the right lens I don't need to crop my pictures too much. If you want to print photo real A4 (and that's a LOT of ink) a 3-4M pixel camera would be fine. Most cameras now are 5-8 M pixel, this is because the pictures they take have to be cropped drastically because they have an inadequate lens. On top of that my Nikon takes really great pictures, better than any of my other digi cameras (but not as good as my ancient Olympus 35mm muji-zoom compact with 200 film).
So if you're going to take a lot of close ups in well lit areas, product shots, interior shots with flash, ie. "snaps" rather than photography, any cheap digi camera will do. Good points are
- USB / Firewire connectivity,
- non-proprietry battery technology, ie. it uses 4 x recharable AAs instead of a battery that only fits that camera, and it comes with a AA recharger.
- non-proprietry storage technology, ie. it uses Compact Flash or some other that is used by a large portion of cameras, rather than just be that manufacturer.
- digital zoom is worthless.
If you're doing outdoor photography, wildlife, landscapes, etc, you may want something with a changeable lens and SLR technology, a digital SLR. Not all digital SLR cameras have changeable lenses. Same good points as above, but be prepared to sacrifice one of the points for a good camera. Heavy cameras are easier to hold steady with a big lens, so try for a metal case (it'll be coated in plastic anyway).
For outdoors the most important thing is the amount of light entering the camera (indoors you can control the lighting with flash / fitted lighting), digital SLRs can have enormous lenses (my 28mm hyperzoom lens has a 72mm diameter), compare this to a compact digital camera with a 12mm diameter lens, I take 36x the light of a compact. And it shows in the picture quality.
I'm a complete duffer with DV cameras so I won't lead you astray with this, but be aware some do offer the option to take digital pictures. Indeed some digital cameras can take low quality short movies.
Let us know if you have any more questions.

New User KIN twom needs help!

Hi guys, I recently purchased a Kin TWOM because i wanted a decent phone without having to pay for data plan. I have some questions that I need help answering/confirming because I searched online and it'll be nice to have all my answers here.
1. WIFI
Q: I understand that the kin two can go on wifi FOR FREE as long as you turn the 3G network off.
Would turing your phone to airplane mode be good enough to NOT use the 3G at all or do I need to go online and do a data block on the phone?
Would turning the data block off online, completely turn off the 3G network, so i guess incase of emergency, no use of 3G?
I can still receive text without 3G (text is not part of data- i think?)?
2. Games
Are there any games you can download from computer to the phone? I saw that someone posted mytouchgames.com as a site inwhich you can lay games on it or something. I want to play games and see if can imput by comp.
3. ZUNE
I never had a zune before and have no idea how it works. I believe this is free. I saw that all you need is to download a program and I can start putting my music from my computer to the phone and just play it like a mp3.
Can you use mp3 from the computer, put into zune and use it as a ringtone?
Ringtone on phonezoo..sending it to the phone would not cost anything? But i'm not sure where to save it to because i don't think i want it to be permenant. Can I send it to the zune program
Some people also mentioned sending by email..i don't really understand it. Are we sending it as an attachment? or a link??
4. Bluetooth
Can you transfer music/pictures/ect. from phone to phone via bluetooth? I would probably like to send pictures to my sister when I see her WITHOUT using text. If not, is the only way is to transfer pictures from phone to computer and post it online?
5. MISC
I heard that there was an issue regarding the phone being on silent and still ring, can someone clarify? like if its on vibrate, the alarm would still go off, but if people called, it'll be on vibrate?
THANK YOU for your time in answering these questions.

icekitsune714 wrote:
Hi guys, I recently purchased a Kin TWOM because i wanted a decent phone without having to pay for data plan. I have some questions that I need help answering/confirming because I searched online and it'll be nice to have all my answers here. Hi and welcome to the boards!
1. WIFI
Q: I understand that the kin two can go on wifi FOR FREE as long as you turn the 3G network off.
Would turing your phone to airplane mode be good enough to NOT use the 3G at all or do I need to go online and do a data block on the phone? Correct, wireless providers do not charge for Wi-Fi use. However, it's very difficult to tell on the Kin whether you're using Wi-Fi or 3G, so I do recommend a data block. As you stated, you can also put the phone in airplane mode, but that does shut off the radio, so you will not receive any calls or texts when you do this.
Would turning the data block off online, completely turn off the 3G network, so i guess incase of emergency, no use of 3G? Correct, you would have to go online to My Verizon or call customer service to enable data. If you think you'll occasionally use it while out, maybe you want the $10 data plan ... $1.99/MB adds up fast!
I can still receive text without 3G (text is not part of data- i think?)? Yes, you will still receive texts. You can even receive MMS (pic and vid messages), but the customer service rep has to set this up correctly on your account. Be very careful that the rep doesn't remove the data block to allow MMS -- you will think you're using Wi-Fi and the charges will really add up.
2. Games
Are there any games you can download from computer to the phone? I saw that someone posted mytouchgames.com as a site inwhich you can lay games on it or something. I want to play games and see if can imput by comp. No experience with this, sorry.
3. ZUNE
I never had a zune before and have no idea how it works. I believe this is free. I saw that all you need is to download a program and I can start putting my music from my computer to the phone and just play it like a mp3. Zune is great. It's free to use (unless you decide to purchase the Zune Pass, which is a music subscription for $15/month, plus you can keep 10 songs every month for your own collection). When Zune installs, there's a setting that syncs all the music and pics already on your computer. So when I installed Zune, all my music from Windows Media Player was there. You simply drag and drop to put on your Kin. You can also subscribe to podcasts through Zune. Plus the Kin does have an FM radio, which sounds good and shows current songs playing if the info is available.
Can you use mp3 from the computer, put into zune and use it as a ringtone? I don't think this worked for Kin users.
Ringtone on phonezoo..sending it to the phone would not cost anything? But i'm not sure where to save it to because i don't think i want it to be permenant. Can I send it to the zune program
Some people also mentioned sending by email..i don't really understand it. Are we sending it as an attachment? or a link??
4. Bluetooth
Can you transfer music/pictures/ect. from phone to phone via bluetooth? I would probably like to send pictures to my sister when I see her WITHOUT using text. If not, is the only way is to transfer pictures from phone to computer and post it online? I read that the Kin Bluetooth only works for headsets, not file transfer, but I'm not certain.
5. MISC
I heard that there was an issue regarding the phone being on silent and still ring, can someone clarify? like if its on vibrate, the alarm would still go off, but if people called, it'll be on vibrate? This is because the ringer switch does not lock. So if your phone is in your pocket, you can bump the switch and put it in another mode. So you think it'll ring and it's on silent, for example.
THANK YOU for your time in answering these questions.

My one user account will not let me open anything on it, so I started a new user account which works. Is there anyway I can get my bookmarks onto the new user account without needing to be ON the new user account?

When I try to open up any files or any application on the other account it says the file not found

You can change a password for an Apple ID. However, now whoever finds the iPod will know his email address and I assume that the email address is his Apple ID.
Apple ID: Changing your password
According to the terms of the iTunes Store, you have to be 13 in order to have an Apple ID.

Creation of new users

Hi,
We've had the ContentDB for a few months now, and the process we have been following while adding new users to OCDB groups is laborious. We log into oid as an admin, and create a user, fill out email, timezone, username, password, etc.. We have found that we cannot add these user to a group until the users have logged into OCDB first. Once we log in as the user, we can then , as admins re-login, then search for them in OCDB and add them to groups.
This is a really time consuming process, when we get requests for multiple users to be added to specific groups. We now have a request for around 1000 users to be added to the system. I'm estimating it will take around two weeks to do it the way we have done it in the past.
THey are also asking to be synched up to Active directory in this new request. So we will have 1000 new users, which I need to add to a group in OCDB. In this scenario, I can't log in for them, so I can then log in as an admin to add them to a group.
Is anyone out there knowledgeable in this area, where you can tell me we aren't doing it right? This seems like we have it wrong, when we have to log in as the user we are trying to administer before we can add them to a group.
We are planning on trying to sync up Active Directory where the DB admin will not know the password of the user. If the user does in fact have to log into OCDB before an admin can assign groups, is it possible to use S2S authentication (since this method doesn't require a user's password)?
With this number of users, I'd like to write a program to do the bulk of the work. Can't write that program, if I can't log in as the user (maybe we can use S2S though?).... or PLEASE tell me we are doing things wrong!
Any help would be most appreciated.
Thanks,
Dan

Hi Dan,
I will suggest to synchronize OID with AD. Once you have any synchronization profile created, any new user created in AD will get populated in OID. You do not have to create that user manually in OID.
At the time of ContentDB installation, contentdb will create provisioning profile with OID. That run 5 minute default time. So every five minute contentdb will provision any new user from OID to Contentdb. Once you have that user in contentdb you will be able to add them in groups.
I hope this will help.
Regards,
Jigar

How do I get rid of the "Or click New to create a new user"

How do I get rid of the “Or click New to create a new user” on the centre pane of the portal screen when you go to "Users"?
My client doesn't allow users to create new users so this needs to be removed, but I can't find where it's configured.

Did you ever figure out how to do this. I have looked everywhere.. I see in the code it is just a seb-text element, but I cannot find the source file that contains this.

Error adding new users from local server

Hello, BPC Gurus,
We use BPC 7.0 MS SP4, MS SQL 2008 (Server name - BPCP01)
In Administration Console we're trying to add user from local server (server with SQL Database), and warning window is appeared with message "The Server Is Not Operational [BPBCP01]"
I checked Logging folder and found message:
==============[System Error Tracing]==============
[System Name] : OSoftAdminSecurity
[Job Name]     : frmManageUser::GetAllObjectsFromDomainServer
[DateTime]     : 2010-12-06 16:58:43
[Exception]
    DetailMsg : {System.Exception: The server is not operational [BPCP01]
   at Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack)
   at OSoft.Consumers.Admin.Security50.ManageDataSet.GetAllObjectsFromDomainServer(String pDomainName, String pLDAPFullPath, Int32 pDomainObjectType, String pObjectValue, String pDomainType)
   at OSoft.Consumers.Admin.Security50.frmManageUser.GetAllObjectsFromDomainServer(String pDomainName, FILTER_TYPE pOptionType, String pOptionValue, String pDomainType)}
===========[System Error Tracing End ]===========
Any ideas?

The installation was done with a local user or with a domain user?
You know that BPC server can not be in the same time also domain controler.
Are you using Windows authentication or CMS authentication.
If you are using CMS authentication then again you can not add local users.
If you are using Windows authentication then you have to go into server Manager
Options - Define System User Groups
Domain Type - Local Windows
System User Group Name - Local Users.
If you are using Windows 2008 make sure you addrole to have compatibility with IIS 6.because using this module bpc is adding new users.
Regards
Sorin Radulescu

Server 2012 Essentials - very slow to add new user

Eight month old Dell PowerEdge R320 rackmount server, running Windows Server 2012 Essentials. XEON E5-2400 processor, 16 GB RAM, 6 TB of SATA disks( RAID-1). "Shared resources' on this server are not all that extensive since there are only six
'shared folders' on this server ... And for certain I am NOT any sort of 'guru' as it would pertain to Windows Server 2012 Essentials, but it seems to me that the fact it takes over 35 minutes to add a single
new user to this server is a bit "unusual", to say the least... As I mentioned, there are only six "shared resource" folders on this server being served from the "DATA" disk that users can access with R/W rights, and all other
resources on this server are marked as 'no access' for our twelve (now thirteen) users. Does this not seem to be an inordinately long time to add a single new user..? I have just checked and found a few updates (maybe five) that were 'pending'
a reboot (which it is doing now, as I write this), and I will try adding a new user as a 'test' after this reboot, but - am I wrong? Doesn't this seem to be an extremely long time just to add a single new user..?

Hi,
Thanks for your post.
Please wait for the update installed and reboot, then try to add user to check the result.
Adding a new user did not need much time generally.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

PSE 11 Editor Workspace setup - new user ?

When I first installed PSE 11, the workspace was similar to the screen shot below, and I really liker thesetup, found it intuitive ans welcoming to use:
When I recently pened the program the workspace changed to this:
I thought maybe the "preferences were changesd accidentally, tried resetting them, and even reinstalling, but still the same "different" workspace in Editor.
Can anyone assist / explain and tell me how to set up / run PSE in the first format?
Thanks!

Elements 10 was similar to most other advanced editing softwares. Priority to the image, to its colors and tones. Tools must not be disturbing to evaluate the image. Text menus should not fill the editing space. In other words, a professional tool for people working with big, calibrated displays in controlled ambient light.
You know what ? Adobe had so many complaints from people :
- with not so good eyesight
- working on small displays (notebooks)
- used with bright and colored softwares,
that they decided to change everything to put the priority on the tools, texts and menus to make Elements editor a common amateur interface.
The result is not perfect (mostly, the interface lacks smart customization to be able to work both on big displays as well as minimal ones). Most former complainers were very happy, others like you and me were disappointed.
I don't think a forum poll would be representative : the new interface is clearly targetted at new users with different needs and practice. I do hope that future versions can add some customization to help advanced users to keep the focus on the image space rather than on the invading panels (photo bin, tool palette...)

Packaged App - Document Library - New user password?

How do you set the password for a new user on the Document Library packaged app. The documentation suggests that by default it uses 'Standard application express authentication' which can then be changed. In which case the user admin function in the app does not work in its default state and would need to be removed if the user wants to use 'Standard application express authentication' (or does it?)
Which leads me to another question:
Is it possible to manage application express users from an application express app in Apex 3.0?
Thanks
Simon

Simon:
For a new user, you also need to create them as a normal Application Express authenticated user. To do that, click the Manage Application Express Users link under Administration from the Application Expres home page.
The only thing the Document Library handles is authorization (who can do what). Authentication (who the heck are you) is determined by the application setting, which by default is standard Application Express authentication. So all you are doing in the Document Library on the user administration page, is defining who is a reader, contributor, or administrator. You are not actually creating users, you are just defining the rights for existing users.
Regarding your second question, you can use the APEX_UTIL API to handle user management within your application. See:
http://download-west.oracle.com/docs/cd/B32472_01/doc/appdev.300/b32471/api.htm#CHDBDCIE
Specifically, CREATE_USER Procedure, EDIT_USER Procedure, CHANGE_CURRENT_USER_PW Procedure, etc.
Regards,
Jason

I need a procedure for creating a new user in SAP NW(BPC)

Hi,
I am doing Migration project from SAP BPC MS to NW.
I don't know how to create a new user in NW.
Could you please provide a document to create or add a new user in NW.
Thanks and Regards
Krishna

Hi Krishna,
If user authentication method is AD, all AD users can be added into BPC for the required access, The task 'Define Security' covers who can add users, create or modify task and member profiles.
The guide is a good place to start understanding it.
If you already have a list of users and would want to mass manage the users into your new system, you could also use the program: ZUJE_MASS_USER_MGMT (to import users, teams, profiles into the target system).
Note: Users and Teams are not included in the transport. So you need to manage them outside either by using the program that I mentioned above or add them individually using admin client.
Thanks,
Sreeni

Cannot find any domain in the add new user screen in BPC NW platform

Hi,
While adding new users in BPC NW, I can't see any value in the Avaialable domains dropdown. Hence I am unable to add any users. I am not sure if I have missed any any step during BPC installation.
Can anyone please help and suggest the cause of this error and also suggest the remedial action.
Thanks...

The BPC Installation guide says:
Make sure that the server is configured on the domain or a trusted domain by going to My
Computer --> Properties --> Computer Name --> Change. Make sure the correct domain is specified.
Also...
In this step, you define the .NET service user that is needed to log on to ApShell and run Server
Manager.
Note
This user must be a Windows domain user that installs the .NET server component, is a local
administrator on the machine, has initial access to ApShell (no task security is checked for this
user), is able to browse the Active Directory, and is used to log on to Server Manager. It can be
any user that exists on the domain on which the .NET server is installed. You can verify the
settings in table UJA_SVR_DEFAULT.
a) Stop the IIS and SAP Business Planning and Consolidation instances using the stoposoft.bat
file. For more information, see Tips [page 27].
b) Go to transaction SE38 and run program UJA3_WRITE_SYS_USERS.
c) Assign a single domain user to all user types:
BPC SysAdminUser Domain\<user name>
BPC AdminUser Domain\<user name>
BPC User Domain\<user name>
Also...
The user who creates the initial application set must be the domain user specified in the sysadmin
field of the UJA3_WRITE_SYS_USERS program.
Also...
On the .NET server, check the C:\WINDOWS\system32\drivers\etc\hosts file to ensure that a fully qualified domain
and an IP resolution exists.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP BusinessObjects
Enterprise Performance Management
Regional Implementation Group

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

All of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any

all of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any file or library that has anything to do with itunes except safari and quicktime are fine. im about to pull out whats left of my hair.

Okay, that's got one thing ruled out at least.
Can you check something for me, big? I'd like to see if iTunes launches with the Bonjour Service disabled.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try launching iTunes. Does it open this time?

BPC 10.0 - New user - SAP_BPC_USER & SAP_BPC_SERVICE needed?

Similar Messages

Maybe you are looking for