BPC 7.0 drill down missing values

Hi,
in our reports when we drill down trought a dimension,
we have missing rows.
For exemple:
LEVEL 1 - TOTAL 100
LEVEL 2A - TOTAL 80
LEVEL 2B - TOTAL 5
we have LEVEL 2C missing with TOTAL 15
the reason seems to be that there is another dimension named "2C" which has nothing to do with this hierarchy.
If we only secodn level we have:
LEVEL 2A - TOTAL 80
LEVEL 2B - TOTAL 5
MATERIAL_LEVEL 2C - TOTAL 15
BPC is putting a prefix to "2C" because "2C" is also a customer...
is it possible?

Please create a customer message from the SAP Service Marketplace and report this potential bug with drill-down.  As mentioned when a dimension member is not unique BPC will prefix the member with dimension name and I suspect this is causing the issue when related to drill-down.
Thanks
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP BusinessObjects
Enterprise Performance Management
Regional Implementation Group

Similar Messages

  • How to drill down the values in ADF

    Hi.,
    I am using jdeveloper 11.1.1.5
    I had created GLYearlyBalEo and GLPeriodicBalEO with corresponding VO
    These are the attributes in GlYearlyBalEo
    GAYB_BU, GAYB_YEAR, GAYB_ACCT, GAYB_OPBAL, GAYB_CRE_BY, GAYB_CRE_DATE, GAYB_UPD_BY, GAYB_UPD_DATE, GAYB_LVL1, GAYB_LVL2, GAYB_LVL3, GAYB_LVL4Thses are the attributes in GlPeriodicBalEO
    GAPB_BU, GAPB_YEAR, GAPB_PERIOD, GAPB_ACCT, GAPB_DEBIT_AMT, GAPB_CREDIT_AMT, GAPB_CRE_BY, GAPB_CRE_DATE, GAPB_UPD_BY, GAPB_UPD_DATE, GAPB_LVL1, GAPB_LVL2, GAPB_LVL3, GAPB_LVL4My Scneario:
    When i Click the Gayb_acct it must be drilled down to get the values of Gapb_acct
    How can i get this., could any one please help me!!

    Hi Wilhelm,
    You can create associations for EO's and viewLinks for VO's to link the two.
    Use the viewlinks to implement master detail behavior.
    Create the association and viewlink based on the attribute that links yearly and periodic.
    I'm not sure if this is what you are looking for because your post isn't that descriptive.
    Good luck
    Luc Bors

  • Table Data Preview tab: Missing Filter Textbox + Drill Down Data Discovery

    1 - With Oracle based tables, when I click them and the table preview loads with all the tabs, on the Data tab there is a Preview entry box. I do not see the same with SQL Server or MySQL based connections. Is there a way to enable it? Am I not looking hard enough or is this function only available for Oracle based tables?
    2 - I'm having a hard time trying to search for an answer to this next question (too many false positives based on the terms I am using). In other tools I have used (namely DB Visualizer), when previewing data in the Table's Data tab, a user may 'drill down' through values by right-clicking the field and applying a filter from the pop-up (drop-down with the field names, usual SQL comparison operators and a text entry box). I see SQL Developer has something similar with a filter list, but it only seems to prompt values in the buffer (in order, no less) and only uses the = operator (no LIKE). Finally, I notice that this value is not even present in the Filter text box (if you wanted to edit it further, add more, etc). As with my prior question, am I missing some usability/functionality setting/config or does this feature simply not exist in the way the other tool employed it? This feature is what keeps the other tool installed on my machine.

    Hi Jed,
    1) Sorry, the tool just has fewer bells and whistles for non-Oracle database connections. You might try adding this as a feature request on SQL Developer Exchange.
    2) The normal SQL operators such as LIKE, <, and so on, are supported for the individual column filters, but there are some quirks:
    Re: Bug - column filter doesn't work in 3.1.05
    Regards,
    Gary
    SQL Developer Team

  • Drill Down are not giving correct values

    Hi
    We created sales Order values as a character and putting them in Rows and populating data by writing update rule. We created variables on calendar month in order to choose specific period of data in the query. For example if we need 02/2008 to 0/42008 which gives two months of data. When I drill down on Sales Order or billing document on the report it’s not giving variable interval data instead it’s pulling all the sales orders and billing documents in the Cube. With out drilling down the values are showing OK.  If I restrict with same period in the cube it's giving correct values
    Please let us know if you have any ideas.
    Thanks
    Naga

    Aah, I guessed it correctly!
    Remove the local var of the Stop button & place the terminal itself inside the inner while loop & directly wire it to the conditional terminal of the outer while loop.
    Please see the attached pic...
    Message Edited by parthabe on 07-30-2009 07:12 AM
    - Partha
    LabVIEW - Wires that catch bugs!
    Attachments:
    arrayreq_mod.jpg ‏97 KB
    arrayreq_mod.jpg ‏97 KB
    arrayreq_mod.jpg ‏99 KB

  • Removing Drill Down is not summing up the values for key figure

    Hi ,
    While analysing the data in BW report , I have encounter the problem in getting the correct data.
    BW report is showing two records for material , having different customer ie. customer1 & customer 2 .
    If i remove the customer from the Drill down , then values is not summed up , rather it is showing the values only for customer1
    Scenario:
    With  customer drill Down:
    Material    Customer   Key Figure1   Key Figure 2
    Mat1       Customer1     1000          2000
    MAt1       Customer2     3000          4000
    Without customer Drill Down
    Material  Key figure1  Key Figure2
    Mat1          3000          4000
    In the query designer there is restriction of customer on two characteristic in default value pane.
    The issue is happening for particular material , for other material , BW report is working fine.
    Please suggest , to resolve the issue.
    Regards,
    Sudheer

    Hi Sudheer,
    What properties are set on your key figures 1 & 2.  Could they be set to Min or Max.
    There may be an aggregation level set if they are calculated key figures that is worth checking.
    With regards
    Gill

  • How to get the 'hand' cursor on an ALV drill down report?

    I have a drill down on PO # going to trans ME23N that is working great.
    But I have noticed on my other drill downs (E.G for billing doc VF03) that when the report is displayed the drill down field value is a) underlined and b) has a 'Hand' appear when you place the cursor over the billing document field.
    This does not happen on my PO # - it is not highlighted with an underscore, nor do you get the small hand  - but it does work when you double click the field.
    The field I am using on the ALV report is RSEG-EBELN.  This is not a KEY field in the table - perhaps that is why it does not have the underscore and the 'hand'.
    Thanks!
    Scott

    Here it is.
    When you build your field cat use the below code.
    DATA : x_fieldcat TYPE slis_fieldcat_alv.
    * Single click on the field will trigger double click event.Also, a hand
    * will appear when the cursor navigates to the field
      X_FIELDCAT-HOTSPOT = 'X'.
    Regards,
    ARS

  • Problem while drill down

    Hi
    I have  a query which is based  on the sales and which has the following characteristics i.e  drill down is based on  Region,Area,Territory, customer and material wise sales..
    Intially we have to show up to customer where as material would be a free characteristics and the sales value  for this should be shown.
    when i look at the region wise/area wise/territory wise result it is not equal to the sum of the all the customer values but it is showing some thing which is entirely  differant. so as i keep removing the drill downs the value is getting changed.
    i used the option USE STANDARD AGGREGATION - TOTAL - WITH RESPECT TO MATERIAL AND CALCUALTE RESULT AS - TOTAL... to get even the customer level value rite or otherwise even that shows a differant value.

    Hi,
    In query how the sales value is getting calculated. Is it just a direct key figure or some calculation. There is a possibility that you are doing some calculations. For example if you find the value by dividing two key figures, then adding after dividing will give you a different result and divding after addition. To be clear,
    When you drill down the result(KF3) will be the addition of divided values which is 13.
    KF1 KF2 KF3(KF1/KF2)
    10   2     5
    15   5     3
    20   4     5
    But when you drill up the result(KF3) will be different.
    KF1 KF2 KF3(KF1/KF2)
    45   11   4.09
    I think this should be your case. check this.

  • Missing records when performing drill down in Webi

    Hello everyone!
    I have a Webi report over a OLAP universe (BEx query), in which I have, among other objects, company code, wage type with hierarchy and personnel number.
    I want to build a report with the following layout:
    Company code 1 | Employee 1 | Wage type hierarchy | Amount
    With this layout, when I try to drill down through the wage type hierarchy, the displayed values are not correct (some records are apparently missing).
    When I remove personnel number from both query and report, the displayed values are correct.
    Has anyone encontered a similar issue?
    Thanks in advance for your responses!
    -Luís.

    Hi all,
    Turns out that our backend BW system was seriously outdated. There has been recently many corrections to the MDX interface. We have updated our service packs and this has resolved our issue.
    Thank you all for your help. Points assigned
    Best regards,
    Luís.

  • Drill down on all values of a row from bex universe

    Hi
    We had developed BO universe on bex query, and as in web i the whole row will come as a single object.
    so when we drill  on the row the drill is not performing on the whole row rather its happenig on a single value of the row
    Ex:- if we have rows named as US, china, America, Japan, Gross sales, invoice etc
    when wen i drill on any row for lets say US, and i drilled on currecy type the drill is happening only us from the row.
    But we need this drill on whole values of the row,
    if aware of bex analyser, we need the same drill down future as in bex.
    Any help in this regards is appreciable.
    Thanks in Advance,

    Hi,
    Your code seems to be right.
    Try writing the code as the below format.
    CASE SY-UCOMM.
    * CHECK FUNCTION CODE
    WHEN '&IC1'.
    * CHECK FIELD CLICKED ON WITHIN ALVGRID REPORT
    IF SELFIELD-FIELDNAME = 'LIFNR'.
    * READ DATA TABLE, USING INDEX ROW USER CLICKED ON
    READ TABLE IT_FINAL INTO WA_FINAL INDEX SELFIELD-TABINDEX.
    * SET PARAMETER ID FOR TRANSACTION SCREEN FIELD
    SET PARAMETER ID 'BES' FIELD WA_FINAL-LIFNR.
    * EXECUTE TRANSACTION 'XK03',AND SKIP INITIAL DATA ENTRY SCREEN.
    CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN.
    ENDIF.
    ENDCASE.
    Thanks
    Arbind

  • Rebate agreement-Difference coming for credit note value and drill down value .

    Hello Friends,
    In 2013 we had created one rebate for which the validity period was 1st April 2013 to 31st March 2014 . At the end of each month, rebate amount was settled by raising credit note to the customer . Now at the end of March'14 during final settlement, a credit note was raised to the customer . The issue here is there is difference of 1.13 (Pounds) between credit note value and the drill down value for March'14 . Lets say our credit note value is-100 (Pounds)and Drill down value for the month March'14 is 101.13 Pounds. We are not able to find out why this difference is coming . Please let me know your inputs on this .
    Regards,
    Sandeep G. 

    Sandeep -
    During final settlement of a rebate agreement, it calculates rebate amout for the the entire time period less payments already made to a customer and then issues a credit memo request based on that.Please check all the the invoices created during entire period and check accrual calculation.It should match.
    You can check VBOX table to get billing documents for the entire period.
    Let us know if you still have an issue.
    Thanks & Regards
    Amit Gupta

  • Retain value of Crystal Report variable during drill-down

    Dear expert,
    In CR, how to have a variable whose value is retained during drill-down? In other words, a variable whose value remains across drill-downs.
    I've tried both Global and Shared variables but their values are not retained when drilingl-down (the value is gone or removed).
    Thank you very much.
    Kind regards,
    aswin
    Edited by: Aswin Setyawan Margono on Jan 27, 2011 1:28 PM

    Not enough info to determine the result or what the cause may be.

  • Key Figure values based on characteristic Drill-downs

    Hello All,
    I have Issue with my drilldown options in the report. The values of Sales qty need to change at particular drilldown.
    I have Sales Revenue and Sales QTY key figures in my DSO with  plant, factory, customer and Business type (Values A, B, C and D) characteristics.
    IN the report requirement I want to show the SALES QTY for only Business Type  "A" at Plant , factory and customer level, but when I am at the Business code level, then I am to show all the quantities by that level.
    THe sales revenue should always show values for all Business code irrespective of the drilldowns.
    please provide suggestions and code on how to go about the issue.
    thanks,
    pra.

    Hello Guys,
    Thanks for your response.
    Let me explain clearly...with an example.
    We have DSO which has 5 chars and 2 KFs.
    Chars - Company Code, Plant, Customer, Material and Business Code (which has values A, B and T).
    KFs - Sales Qty and Sales Revenue.
    Report output ---
    Customer
    Company Code
    Plant
    Material
    Business Code
    Sales Qty and Sales Rev
    Requirement is a follows -
    When the report is run.... the report will display on Customer with KFs.
    then if user wants to pull company code he can do so...as will other chars (Plant, Material and Business Code)
    but the condition is that when the user is seeing the report at customer with KFs ,....the KFs should only show values where business code = "A"
    so is the same with other chars - Company code, Plant and Material.
    But when user drags and drops the Business Code char in the report against the KFs .then the report should include all Business Codes ( A, B and T) with corresponding sales qty and sales rev for all business codes.
    Solution - Partially working--
    What I have done..is restricted the sales qty and rev with Business code = A, its working fine for all drill downs except that, when I am at business code level its showing as
    Business Code QTY REV
    A             300          3000
    B                0              00
    T                0               00 .
    Hope you got the issue. Please let me ,,if you need any information.
    Thanks,
    Pra

  • Drill down value not matching with Displayed Report Painter Issue-GR55

    Hi,
    Need your help for an issue in drill down value of report painter from actual cost coloumn.
    I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
    Could you suggest on this issue.
    Thank you for your cooperation.
    Regards,
    Rakesh

    The report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.

  • Error: "Numeric value entered was too low " -drill down discoverer report

    Hi ,
    We have created a Discoverer drill down report (drill down to another worksheet). We have two worksheets one for the master and and the other for the detail.The parameters are passed to detail sheet (The link information is set using the Manage links option in the Discoverer plus) from the master. This whole thing works fine in dev instance.
    We imported the business area . Deleted the existing file and the opened the new .dis file from local computer and then saved it to db.
    Now the master report runs fine and when we click on the drill down link for the detail we get the following error
    An error occured while handling the event.See the application log for more details.
    - The numerical value entered was too low."
    However the link works fine in plus and desktop in the same instance.
    Kindly help.
    Thanks,
    Shobana

    I hope you're not using Internet Explorer v7.
    It has a specific problem with Disco Viewer, is not certified to work with it, and the error is drilling in Viewer.
    The Oracle bug (metalink) is: 5608740
    This bug prevents the listing of drill items under the drill icon.
    Russ

  • Only Dimension Table Values in Combo Box or Drill Down Selections

    Hi All,
       How to get only Dimension Table Values instead of Master Data Values in Combo Box or Drill Down Box list of values?
    I am getting all the values in 0CALMONTH Combo Box where i need only infoproviders values.
    In Entry List tab of Combo Box when i select 0CALMONTH its reading from its Master Data.Is there any option how there is Dimension table in Value help.
    In Query, infoobject levels the filter values selection is set as infoprovider only.
    Can anyone please let me know how to get only dimension table values when we use combo box.
    Thanks & Regards
    K.Srinivas Rao

    Hi
    Create one BI query with only one object in the output of the query. (In your case 0CALMONTH)
    So now if when you run the query it will show values which are there in infoprovider. THen drag one form from output of this query in vc & create dropdown list on this.
    Is this what you are looking for?
    regards
    Sandeep

Maybe you are looking for