BPC 7.0M SP3 patch 2 didn't do anything

Hello everyone,
We are curently facing an issue with BPC 7.0M SP3 regarding the expiration of the signature of some BPC files. We check the Note and found to not related to our issue : Note 1334212 - Signed certification on BPC 7M SP3 and Note 1334217 - BPC 7.0M SP03 Patch 2
Therefore we installed the Patch 2 and download the new client.  But we found out that nothings has changed. There are no new  digital certificate.
Do you experiences the same issue ? Do you have a clue about it ?
Best regards
Yls

For info these are user-to-user forums, you are not talking to iTunes Support nor Apple.
What, if anything, have you tried ?e.g. :
- clearing Safari's history and data (Settings > Safari)
- closing apps via the iPad's taskbar
- soft-reset
- resetting your network settings (Settings > General > Reset > Reset Network Settings (you will need to re-enter network passwords to reconnect to them)
- backing up (and copying purchases over to your computer's iTunes library) and restoring to that backup

Similar Messages

  • Upgrade BPC 5.1 SP3 to SP10

    Hi,
    I'll be upgrading one of clients' service pack from BPC 5.1 SP3 to SP10 in the next coming week.  I'd like to know if there's any new functionalities that comes with SP10.
    I'd also like to know what issues can I expect to come accross with the new patch.
    Regards,
    Mosa

    Into SMP you can see all the information necessary about this build.
    You will have everything which is new.
    Because i tis a cumulative patch you actually have to read all the information for SP4,5..until 10.
    You don't need to install all the patches but SP 10 will contains all the fixes from SP4 till 10.
    You can use the follow link
    https://websmp103.sap-ag.de/instguidescpm-bpc
    Kind Regards
    Sorin Radulescu

  • SAP BPC 7.5 SP3 and Citrix Entering Data through BPC Client and Citrix

    Hello BPC experts,
    my client is using SAP BPC 7.5 SP3 in combination with Citrix. We are having problems now, while entering data through the BPC Client (installed on BPC Server) and the BPC Client (running on Citrix).
    When we enter data through the BPC Client (Server) and expand the sheet, we can only see the data that we entered through the BPC client (Server). When entering data through the BPC Client (Citrix), we can see only the data we enter through the BPC Client (Citrix).
    The database, however, saves both entries correctly. For test purposes we created a test report which shows both entries correctly in the BPC Client on the server and on Citrix.
    Does anyone have an idea what can be wrong with our system? We tried to create an EvDRE log File for this BPC version as well, but failed. Maybe one of you already did that and can help me with this.
    Thanks in advance!

    You can greatly improve your chance of receiving a helpful answer to your question if you state the version (MS or NW) of BPC which you are using.
    Also notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of this forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future to be able to reach the right audience for your question.
    Thanks and best regards,
    [Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
    SAP Labs, LLC
    BusinessObjects Division
    Americas Applications Regional Implementation Group (RIG)

  • Outlooksoft ServiceManager Service  - BPC 7.0M SP07 Patch 1, 2, or 3

    We have noticed inconsistent behavior with the Outlooksoft SeviceManager service installed by BPC 7.0M SP7 patch 1, 2, or 3. If the patch is installed on a server where there is a virtual name defined, the service is installed correctly and starts up.
    However if any of these patches that contain the NLB fix in patch 1 is installed on a system that does not have a virtual name defined (not NLB), then the service is installed, the bpc system admin user is set at the Log on user, but the service will not start. This is because in this case, the BPC installation program does not set the BPC System Admin user with Log On as a Service permission.
    Why does the installer do this correctly when a virtual name is defined, but not when there is none? The service is set to start automatically in either case, so when you do not have a virtual name you get an application popup that a service or driver failed to start. Once you assign the Log on as a service permission, then it works.
    Is the intended behavior that this service is not necessary in a non-NLB setup? In this case, it would be better to set the service to Manual startup or Disabled rather than automatic with a log on account that does not have the correct priviledges.

    Hi,
      The architecture you designed is ok. Now there are some things you can take in consideration:
    1. Usually, the reporting Services is better to be on the application server. This because it need iis and iis installed on db server cand be an open door to the server.
    2. If you have a cluster for SQL server - you can put the fileshare on the DB side (added to cluster - solves the file-over problem)
    Regarding the installation files you downloaded:
    language is related to languages patch in case you want to use BPC in a different language than english
    sms installation kit  - silent client installation.
    Hope this can help,
    Mihaela

  • Clients repeatedly asking for update in BPC 5.1 SP5 (Patch 2)

    Hi guys.  Hope you can help.
    I am running a Dev server with BPC 5.1 SP5 Patch 2 and have enabled Auto-Update for Clients and Admins.
    When I log on, I receive the message that a new update is available for my software and it installs perfectly (I am a Local Admin on my own PC).
    However, when a client without Local Admin privilege on their PC connects, it tells them that the update is available and proceeds to install it.
    However, once it reaches the end of installation and you re-connect to the server, it again tells you that an update is available......
    This process never ends.
    We have the server setup with a Domain Admin account for the auto-update and have applied Patch 2 and the workaround to fix non-installation of the updates.
    As I said, it works for Local Admin clients, but whilsty it appears to work for non-Admins, it must be failing to update something (most likely the registry key with the version numbers in).
    On my PC (that does update properly), I have the following keys:
    HKEY_LOCAL_MACHINE\SOFTWARE\OUTLOOKSOFT\50\ADMIN\VERSION = 5.0.502
    HKEY_LOCAL_MACHINE\SOFTWARE\OUTLOOKSOFT\50\ADMIN\UPDATEVERSION = 5.0.506.02
    I can't check the failed client yet, as I'm not an Admin on that PC
    Has anyone any suggestions?
    Thanks
    Craig
    Edited by: Craig Aucott on Mar 6, 2009 4:56 PM

    Thanks to all for the repsonses so far.
    So, Sorin, are you saying the the client auto-update will only work for users who are a local admin on their PC ???
    I thought that that was the reason for having the option to enter an admin account into BPC Server Manager for Auto-Update - To override the local user, and allow the update to happen.
    So I guess my question now is whether it is possible to run this update (most of my clients are not local admins), or whether I need to look at deploying the SMS version via either Altiris or an Active Directory installation?
    Thanks again
    Craig

  • EVDRE Access Issue Post Upgrade from BPC 5.1 SP3 to BPC 7.0 SP6

    Greetings,
    Recently upgraded from BPC 5.1SP3 to BPC 7.0 SP6.  Experiencing some strange behavior regarding the ability to send data to BPC from an EVDRE.  Both users are part of the same secuity team, thus have the same security in both versions.  However, one is able to send data to BPC 7.0 SP6 for a specific input template while the other recieves a message "There is no data to refresh."    This message is not encountered in BPC 5.1 SP3.
    The strange thing is that the user who receives the "there is no data to refresh" is able to rebuild the input template ad hoc and send data to BPC
    I have reviewed security, cleared the cache on the user's machine.  I had the user with this issue log onto the app server; she encountered the same behavior regarding this template.  Also tested a seperate input template in another application, this issue did not occurr.
    Any ideas would be greatly appreciated.
    Regards,
    Greg Lakin

    Hi, n
       From your description it looks like the problem si more related to that specific user. Please try to reprocess the security for that user. Then go on file server and go into <appset>/<application>/<private publication>/<user name> and delete appinfo.zip.
       Other idea can be related to the excel cache, but I don;t know why is not working for this specific user. You can try to save it in a new template as Patrick indicated.
    You can try also clear local application information from admin client or try from other machine using the same client.
    Hope this can hekp you,
    Mihaela

  • Upgrade BPC 7.5 SP3 MS

    Hi,
    We have BPC5.1 SP11 on SQL Server 2005 and we want to upgrade to BPC 7.5 SP3 on SQL Server 2008.
    Is there a SAP guide with all the steps necessary to be done to migrate an appset from 5.1 to 7.5?
    I find something on Upgrade Guide 7M.pdf and SAP_BPC_70_SP04_M_Install.pdf, but this is for BPC 7.0.
    For BPC 7.5 is there an official SAP guide? Are the migration steps the same?
    thanks
    best regards
    massimo

    Massimo - The SAP website uses javascript so it is difficult to get an accurate direct link to any specific page.  Click on patrick's link and then navigate to version 7.5 MS on your left pane.  Then you should be able to see the 7.5M guides.
    However, I'm noting that the guides are incomplete - for example, there is no Office or Admin guides for BPC 7.5 listed.
    Does anyone know why?  Here are the guides listed for 7.5 Microsoft version:
    SBOP Plan & Consol - CopyOpening Guide 
    SBOP Plan & Consol - Currency Conversion Guide 
    SBOP Plan & Consol - Intercompany Matching Guide
    SBOP Plan & Consol 7.5 M Installation Guide 
    SBOP Plan & Consol 7.5 M Master Guide     
    SBOP Plan & Consol 7.5 M Operations Guide
    SBOP Plan & Consol 7.5 M Upgrade Guide    
    Greg

  • Which Ms office version works with BPC 5.1 sp3

    Hello, just as the subject says which office versions runs with BPC 5.1 sp3?
    Best Regards
    Jojo

    There are some issues with BPC 5.1 and Office 2007.  Some that I've experienced (I believe we're also on SP3)....
    You have to be careful when saving reports and input templates in BPC for Excel - make sure they are saved in the 2003 version, not 2007.
    Also, if you have Excel 2007 and you maintain dimension members within the BPC Admin console, you have to save the changes, get out of the member sheet, then go back into the member sheet and process the dimension.  If you try to process right after saving, you get an error.  But if you back out of the member sheet between the save and process, then the process works just fine.
    Search OSS for Search term Office 2007 and Application area EPM-BPC*to find additional information regarding BPC and Office 2007.

  • Comp.wrks++ still wont install after sp3 patch applied

    I am attempting to install measurement studion 1 component worksC++ on a pc running windows 2003 server x64
    MS visual studion sp5 is installed.
    The SP3 patch has been applied and I have verified the registry text has been added.
    the machine has bee rebooted after every step.
    The NI install program still reports that Component works requires >sp3 and quits.
    How can I complete the installation?

    Hi Ebrinton,
    Please refer to the following KB for this issue:
    Why Does Measurement Studio for Visual C++ Not Install with Visual Studio Service Pack 4 or Above?
    Cheers,
    David Goldberg
    Applications Engineer
    Message Edited by AEDavidG on 09-12-2006 12:35 PM
    Cheers,
    David Goldberg
    National Instruments
    Applications Engineer

  • What is OsoftInsightSchedulerWindowsService.exe (on BPC 5.1 SP3 server)

    - OsoftInsightSchedulerWindowsService.exe (BPC, single server)
    - BPC 5.1 SP3
    We do not have Insight enabled (as far as we can tell). However, I constantly see this process intermittently churning (using and releasing about 8KB memory). Is this normal/expected activity if Insight is not enabled?

    This is normal.  The process sits and looks for changes to pass or requests to pass to the Insight when it is enabled.  Since Insight runs on a parallel application when enabled, the process sits and calls for new information, that may be passed over from th eapp.

  • We didn't find anything to show here in archived emails

    We use Outlook as an email client, since we don't have a Exchange Server. When I make an archive 2 months ago, it works perfect, I could see all my older messages in my inbox and folder created.  For  some reason (I believe after the last office
    update or patch), every time i make an archive, when I open the file this message appear  "We didn't find anything to show here in archived emails" and it's very annoying. Nothing appears even it says that there are unread emails on the folder.
    How can I fix it?

    Hi,
    Please check if you have any filter applied to this folder, try to click "Clear All" on filter dialog and see if it works:
    http://office.microsoft.com/en-au/outlook-help/view-settings-is-under-view-current-view-HT102769168.aspx
    Also, try to
    use scanpst.exe tool to repair your archiver data file. Please refer to this article on how to use scanpst.exe:
    http://office.microsoft.com/en-us/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx
    Hope this helps.
    Thanks,
    Ethan Hua CHN
    TechNet Community Support

  • I updated to iTunes 12 and didn't like it. Followed advice to revert to 11.1. Now my iphone won't sync and error message says I need iTunes 11.2 or higher. Apple Download choices didn't have anything between 11.1.5 and 12. What can I do?

    I updated to iTunes 12 and didn't like it. Followed advice to revert to 11.1. Now my iPhone 5 won't sync and error message says I need iTunes 11.2 or higher. Apple Download choices didn't have anything between 11.1.5 and 12. What can I do? Using iTunes 12 is not an option. Many features I used for audiobooks have disappeared.

    The version immediately prior to 12 was 11.4.0.18. Here are direct download links from Apple's servers:
    iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
    iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
    tt2

  • My Photoshop Elements 13 doesn't recognize my Canon PRO-10 printer. I've tried EVERYTHING. Reinstalled all my software, didn't fix anything. Can anyone help?

    I have Windows 7 x64 on a desktop PC. I have Photoshop Elements 13. I bought the Canon PRO-10 PRINTER on 2/3 and at first it worked fine. Then I tried to install it as a plug-in in Elements 13, and everything went bad. When I click on AUTOMATION TOOLS it does say "Canon Easy Photo Print Pro" like it should, but when I click on that I get an error message NO SUPPORTED PRINTER FOUND. CONNECT A PRINTER SUPPORTED BY THIS SOFTWARE AND THEN INSTALL A DRIVER. I also tried the FILE > PRINT command which also said there was no printer installed.
    I reinstalled the Canon software and driver. Then I called Canon. I got a real live tech person who checked everything out and asked me to print from a different program. That worked fine and he said, the printer is fine. It's a problem with Adobe. Contact them. I uninstalled my Adobe Photoshop Elements 13 and reinstalled it. But the whole situation remains the same. I can't find how to contact a live technician for help so I'm appealing to ANYONE to help me with this. If you can 't help me with the printer problem, can you tell me how to reach a live tech support person at Adobe??
    Message was edited by: Fran Cornelius
    Made editing changes at 4:05 pm.

    Hi,
    After talking to 3 different Canon techs who didn't know anything about
    this and told me it was Adobe's fault, a 4th Canon tech e-mailed me a list
    of the Elements software that is "compatible" with the Canon Pro-10
    printer. The list stops at Elements 12! In other words, Canon has not
    written the software for their plug-in to work with Elements 13 yet. I
    personally am stunned by this. Considering how popular Adobe Elements is,
    you'd think Canon would be up-to-date on having their new printer's plug-in
    work with Elements 13, which has been out there for some time.
    Not only that, Canon's more expensive printer, the Canon PRO-100, also has
    the same problem. My friend just bought one and told me the plug-in doesn't
    work with Elements 13.
    I have figured out a solution, if it will be of help. I had just
    uninstalled Adobe Elements 12 and when I saw that Canon's plug-in worked
    with Elements 12, I quickly reinstalled it. Sure enough, when I clicked on
    AUTOMATION TOOLS there was the Canon plug-in, and when I clicked on it, the
    Canon print screen opened. So I decided I would do my photo editing in
    Elements 13, and when ready to print I would open the photo in Elements 12
    and print it there. Hope that helps.
    F
    On Sat, Feb 28, 2015 at 4:08 PM, BMonahan9905 <[email protected]>

  • Is there a way to upload music that I have saved on my computer to my ipod? I didn't see anything in the user guide for doing this.

    Is there a way to upload music that I have saved on my computer it my ipod touch or is uploading from iTunes the only way to upload music? I didn't see anything in the user guide on how to do this.

    These two articles explain how to put music from your PC into iTunes and then all you need to do is sync it with your iPod
    http://support.apple.com/kb/HT1473#2
    http://support.apple.com/kb/ht1347

  • I am trying to find out how to copy the image on my existing hard drive to my new hard drive before I install it so it will be like I didn't do anything.

    I am trying to find out how to copy the image on my existing hard drive to my new hard drive before I install it so it will be like I didn't do anything. Thanks for the info. on changing it.

    Format is found in the Erase Tab:
    The Disk Image is found on the Restore Tab:

Maybe you are looking for