BPC 7.5 NW - Client SP6 - Log in Issues

Hello All,
Wondering if any of you are also facing a similar issue. We are on SP3 on all the BPC boxes on the transport landscape.
In order to test, SP6, before rolling it out, we installed it on the sandbox and upgraded the client on test laptops, so as not to impact the current development process.
We are unable to log in to any of the BPC DEV, QA or PRD boxes from the laptops which have client SP6 installed on them. We get an Network / Security Error when trying to log in. Anybody facing such an issue?
However, we are able to login and work in the sandbox from laptops which have client SP4 installed on them. But this would mean that we will not be able to roll out the front end client, till the server client has been installed in Production.
Any thoughts / suggestions?
Regards
Sunil

Sunil- the server and client versions go " lock step".
As you installed the necessary server on the Sandbox to go with your client SP^...you are able to login to Sandbox OK.
The DEV, QA and PRD servers are still NOT in step with the clients.
Yes- you are right in saying that the server needs to be updated for the corresponding client to connect.
Also don't forget to check the .NET versions also, sometimes those also need an upgrade to go with your Server version, Actually all the 3 go LOCK STEP....Server, Client and .NET Servers..
Hope this helps..

Similar Messages

ORA-16191: Primary log shipping client not logged on standby.

Hi,
Please help me in the following scenario. I have two nodes ASM1 & ASM2 with RHEL4 U5 OS. On node ASM1 there is database ORCL using ASM diskgroups DATA & RECOVER and archive location is on '+RECOVER/orcl/'. On ASM2 node, I have to configure STDBYORCL (standby) database using ASM. I have taken the copy of database ORCL via RMAN, as per maximum availability architecture.
Then I have ftp'd all to ASM2 and put them on FS /u01/oradata. Have made all necessary changes in primary and standby database pfile and then perform the duplicate database for standby using RMAN in order to put the db files in desired diskgroups. I have mounted the standby database but unfortunately, log transport service is not working and archives are not getting shipped to standby host.
Here are all configuration details.
Primary database ORCL pfile:
[oracle@asm dbs]$ more initorcl.ora
stdbyorcl.__db_cache_size=251658240
orcl.__db_cache_size=226492416
stdbyorcl.__java_pool_size=4194304
orcl.__java_pool_size=4194304
stdbyorcl.__large_pool_size=4194304
orcl.__large_pool_size=4194304
stdbyorcl.__shared_pool_size=100663296
orcl.__shared_pool_size=125829120
stdbyorcl.__streams_pool_size=0
orcl.__streams_pool_size=0
*.audit_file_dest='/opt/oracle/admin/orcl/adump'
*.background_dump_dest='/opt/oracle/admin/orcl/bdump'
*.compatible='10.2.0.1.0'
*.control_files='+DATA/orcl/controlfile/current.270.665007729','+RECOVER/orcl/controlfile/current.262.665007731'
*.core_dump_dest='/opt/oracle/admin/orcl/cdump'
*.db_block_size=8192
*.db_create_file_dest='+DATA'
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='orcl'
*.db_recovery_file_dest='+RECOVER'
*.db_recovery_file_dest_size=3163553792
*.db_unique_name=orcl
*.fal_client=orcl
*.fal_server=stdbyorcl
*.instance_name='orcl'
*.job_queue_processes=10
*.log_archive_config='dg_config=(orcl,stdbyorcl)'
*.log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
*.log_archive_dest_2='SERVICE=stdbyorcl'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_format='%t_%s_%r.dbf'
*.open_cursors=300
*.pga_aggregate_target=121634816
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=364904448
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS'
*.user_dump_dest='/opt/oracle/admin/orcl/udump'
Standby database STDBYORCL pfile:
[oracle@asm2 dbs]$ more initstdbyorcl.ora
stdbyorcl.__db_cache_size=251658240
stdbyorcl.__java_pool_size=4194304
stdbyorcl.__large_pool_size=4194304
stdbyorcl.__shared_pool_size=100663296
stdbyorcl.__streams_pool_size=0
*.audit_file_dest='/opt/oracle/admin/stdbyorcl/adump'
*.background_dump_dest='/opt/oracle/admin/stdbyorcl/bdump'
*.compatible='10.2.0.1.0'
*.control_files='u01/oradata/stdbyorcl_control01.ctl'#Restore Controlfile
*.core_dump_dest='/opt/oracle/admin/stdbyorcl/cdump'
*.db_block_size=8192
*.db_create_file_dest='/u01/oradata'
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='orcl'
*.db_recovery_file_dest='+RECOVER'
*.db_recovery_file_dest_size=3163553792
*.db_unique_name=stdbyorcl
*.fal_client=stdbyorcl
*.fal_server=orcl
*.instance_name='stdbyorcl'
*.job_queue_processes=10
*.log_archive_config='dg_config=(orcl,stdbyorcl)'
*.log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
*.log_archive_dest_2='SERVICE=orcl'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_format='%t_%s_%r.dbf'
*.log_archive_start=TRUE
*.open_cursors=300
*.pga_aggregate_target=121634816
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=364904448
*.standby_archive_dest='LOCATION=USE_DB_RECOVERY_FILE_DEST'
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS'
*.user_dump_dest='/opt/oracle/admin/stdbyorcl/udump'
db_file_name_convert=('+DATA/ORCL/DATAFILE','/u01/oradata','+RECOVER/ORCL/DATAFILE','/u01/oradata')
log_file_name_convert=('+DATA/ORCL/ONLINELOG','/u01/oradata','+RECOVER/ORCL/ONLINELOG','/u01/oradata')
Have configured the tns service on both the hosts and its working absolutely fine.

ASM1
=====
[oracle@asm dbs]$ tnsping stdbyorcl


TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 19-SEP-2008 18:49:00


Copyright (c) 1997, 2005, Oracle. All rights reserved.


Used parameter files:


Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.20)(PORT = 1521))) (CONNECT_DATA = (SID = stdbyorcl) (SERVER = DEDICATED)))
OK (30 msec)
ASM2
=====


[oracle@asm2 archive]$ tnsping orcl


TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 19-SEP-2008 18:48:39


Copyright (c) 1997, 2005, Oracle. All rights reserved.


Used parameter files:


Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.10)(PORT = 1521))) (CONNECT_DATA = (SID = orcl) (SERVER = DEDICATED)))
OK (30 msec)
Please guide where I am missing. Thanking you in anticipation.
Regards,
Ravish Garg

Following are the errors I am receiving as per alert log.
ORCL alert log:
Thu Sep 25 17:49:14 2008
ARCH: Possible network disconnect with primary database
Thu Sep 25 17:49:14 2008
Error 1031 received logging on to the standby
Thu Sep 25 17:49:14 2008
Errors in file /opt/oracle/admin/orcl/bdump/orcl_arc1_4825.trc:
ORA-01031: insufficient privileges
FAL[server, ARC1]: Error 1031 creating remote archivelog file 'STDBYORCL'
FAL[server, ARC1]: FAL archive failed, see trace file.
Thu Sep 25 17:49:14 2008
Errors in file /opt/oracle/admin/orcl/bdump/orcl_arc1_4825.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Thu Sep 25 17:49:14 2008
ORACLE Instance orcl - Archival Error. Archiver continuing.
Thu Sep 25 17:49:44 2008
FAL[server]: Fail to queue the whole FAL gap
GAP - thread 1 sequence 40-40
DBID 1192788465 branch 665007733
Thu Sep 25 17:49:46 2008
Thread 1 advanced to log sequence 48
Current log# 2 seq# 48 mem# 0: +DATA/orcl/onlinelog/group_2.272.665007735
Current log# 2 seq# 48 mem# 1: +RECOVER/orcl/onlinelog/group_2.264.665007737
Thu Sep 25 17:55:43 2008
Shutting down archive processes
Thu Sep 25 17:55:48 2008
ARCH shutting down
ARC2: Archival stopped
STDBYORCL alert log:
==============
Thu Sep 25 17:49:27 2008
Errors in file /opt/oracle/admin/stdbyorcl/bdump/stdbyorcl_arc0_4813.trc:
ORA-01017: invalid username/password; logon denied
Thu Sep 25 17:49:27 2008
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
It may be necessary to define the DB_ALLOWED_LOGON_VERSION
initialization parameter to the value "10". Check the
manual for information on this initialization parameter.
Thu Sep 25 17:49:27 2008
Errors in file /opt/oracle/admin/stdbyorcl/bdump/stdbyorcl_arc0_4813.trc:
ORA-16191: Primary log shipping client not logged on standby
PING[ARC0]: Heartbeat failed to connect to standby 'orcl'. Error is 16191.
Thu Sep 25 17:51:38 2008
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 40-40
DBID 1192788465 branch 665007733
FAL[client]: All defined FAL servers have been attempted.
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
Thu Sep 25 17:55:16 2008
Errors in file /opt/oracle/admin/stdbyorcl/bdump/stdbyorcl_arc0_4813.trc:
ORA-01017: invalid username/password; logon denied
Thu Sep 25 17:55:16 2008
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
It may be necessary to define the DB_ALLOWED_LOGON_VERSION
initialization parameter to the value "10". Check the
manual for information on this initialization parameter.
Thu Sep 25 17:55:16 2008
Errors in file /opt/oracle/admin/stdbyorcl/bdump/stdbyorcl_arc0_4813.trc:
ORA-16191: Primary log shipping client not logged on standby
PING[ARC0]: Heartbeat failed to connect to standby 'orcl'. Error is 16191.
Please suggest where I am missing.
Regards,
Ravish Garg

BPC 7.0 NW Client Install Error

Hi Expert:
Now I met some problem in install BPC 7.0 NW Client.
At the first time, I ask me to provide the XceedZip.dll, however I do not have. So I just cancel the install process.
Then, I download the lastest version XceedZip.dll and put it into the corresponding folder.
At the second time, I told me "OSoftDMClientTools.DMTools found in registy.Please refer to administrator before install". I think this is caused by cancelling the install process.
How should I do to solve this problem?
Thank you
Regards,
Louis Lu

Hi,
one way is to manually delete the key in registry. Open the registry table by click start, run then type u201Cregeditu201D
In the menu Edit, click find then type u201Cosoftaddinu201D
Then you can delete those keys.
Then it should be possible to do the client installation again.
regards,
Sreedhar

SAP BPC 10.0 Web Client Blank Screen after login

Hi ALL,
We are using SAP BPC 10.0 Web Client with Adobe Flash Player 13.0.0.214 with IE 9.0 on Windows 7.0.
We face strange error where on only on certain PC, the BPC web client working.. On other getting Blank/Blank Screen after login (with "movie not loaded" on the adobe flash player).. Both PCs are having the same setting.
Even one of PC which previously working, starting this week suddenly getting the same error.. I have created OSS message and got feedback with also share this problem on this forum.
I have done several actions as mentioned on several SAP notes )1624267, 1664889, 1681147, 1694871, 1752971, 1798336, 1804221, 1806371, 1811218, 1820505, 1918631, 1968584), but still no luck..
If you have the same issue, kindly share..
Thanks and regards,
Hery

Yes .. Compatibility View also checked.. in several PCs, it is working well. both failed and working PCs have the same setting.
Just found another weird: in one working PC, 2 different windows local-admin users login to the same PC for BPC-web and getting different result (1 Ok ; 1 failed) ..seems it is related with the user profile and login-domain servers (we have multiple login-domain servers with load balancing mechanism).
Thanks and regards,
Hery

RPC Client Access Logs - Throttling Policy

Trying to get useful information on who is being throttled by a specific policy.
Created the policy: New-ThrottlingPolicy -Name LimitMessagesSent -RecipientRateLimit 5 -ThrottlingPolicyScope Organization
Enabled RPC Client access logging: <add key="LoggingTag" value="ConnectDisconnect, Logon, Failures, ApplicationData, Warnings, Throttling" /> and bounced the service.
Forced the throttling by sending many emails.
Opened the log and found this:
2014-07-23T21:24:28.820Z,40,1,/o=Exch/ou=Monitoring Mailboxes/cn=Recipients/cn=HealthMailbox872ac0efb9c44ddf9d0d1d4f0e4dbb55,,Microsoft.Exchange.RpcClientAccess.Monitoring.dll,15.0.0.0,Cached,,,,ncacn_http,Client=Microsoft.Exchange.RpcClientAccess.Monitoring,,,,,00:00:00.0160000,"BS=Owner:Sid~CAMPUS\SM_6f8aaf3f77f94192a~Rca~false,Conn:1,MaxConn:40,MaxBurst:150000,Balance:149988.3,Cutoff:Unlimited,RechargeRate:900000,Policy:LimitMessagesSent,IsServiceAccount:False,LiveTime:00:02:00.0650494",,,
Makes no mention of the user that was throttled. How can I troubleshoot if I cannot see the user in the logs?
Thanks.

Hi
We need to assign this newly created throttling policy to the end users else it will not be effective.
The below commands will help you out.
Use below command to assign this newly created throttling policy to the user
Set-Mailbox MBXName -ThrottlingPolicy LimitMessagesSent
Run the below command to ensure that the throttling policy is assigned
Get-Mailbox MBXName | Select Throttling Policy
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

SCEP Client Activity Logs Files - Retention Policy?

In SCEP 2012....
1. Where are client activity log files stored?
2. What is the default retention policy?
I remember with FCS, I think the historical data was stored for 14 months (by default). Is that the same for SCEP?
Andrew Marcos

Logs are in c:\program data\Microsoft\Microsoft Antimalware\Support.
Not sure on retention as I am working in non-persistent VDI's that get their logs reset after a log off!
Cheers
Paul | sccmentor.wordpress.com

Client Export Log too big

Hi all,
in the client export log I found many of these string for different tables:
4 ETW000 AGR_HIER.X_POS: NUMC value changed from '     ' to '00000'
and the log size is about 2,5 GB.
What I have done to solve the problem??
Thanks in advanced
M.

The size of client export is about 12,5GB.
The problem is that in the log file of the export is too big because there are many string for different tables that contains this message:
4 ETW000 CEFORMS.FLEVEL: NUMC value changed from ' ' to '0'
4 ETW000 CEFORMS.NUMBR: NUMC value changed from '   ' to '000'
4 ETW000 CEFORMS.FLEVEL: NUMC value changed from ' ' to '0'
4 ETW000 CEFORMS.NUMBR: NUMC value changed from '   ' to '000'
4 ETW000 CEFORMS.FLEVEL: NUMC value changed from ' ' to '0'
4 ETW000 CEFORMS.NUMBR: NUMC value changed from '   ' to '000'
4 ETW000 CEFORMS.FLEVEL: NUMC value changed from ' ' to '0'
4 ETW000 CEFORMS.NUMBR: NUMC value changed from '   ' to '000'
4 ETW000 CEFORMS.FLEVEL: NUMC value changed from ' ' to '0'
4 ETW000 CEPRINT.COLOR: NUMC value changed from ' ' to '00'
4 ETW000 CEPRINT.FROW: NUMC value changed from '    ' to '0000'
4 ETW000 CEPRINT.SFTCT: NUMC value changed from ' ' to '00'
4 ETW000 CEPRINT.COLOR: NUMC value changed from ' ' to '00'
4 ETW000 CEPRINT.FROW: NUMC value changed from '    ' to '0000'
4 ETW000 CEPRINT.SFTCT: NUMC value changed from ' ' to '00'
4 ETW000 CEPRINT.COLOR: NUMC value changed from ' ' to '00'
4 ETW000 CEPRINT.FROW: NUMC value changed from '    ' to '0000'
4 ETW000 CEPRINT.SFTCT: NUMC value changed from ' ' to '00'
4 ETW000 CEPRINT.COLOR: NUMC value changed from ' ' to '00'
and if I don't delete the log file in /usr/sap/trans/log this file system will be full (This is the real problem)
I don't understand why I find so many entry (NUMC change from ' ' to '00') for the same tables in the log file.
Thanks
M.

Client call logging

I am trying to redirect the client call logging to a file, does anyone know what form the .properties file should take?
This is what I have currently:
java.util.logging.FileHandler.level=FINER
java.util.logging.FileHandler.directory=C:\logs
java.util.logging.FileHandler.prefix=rmi-client-calls
java.util.logging.FileHandler.formatter=java.util.logging.SimpleFormatter
sun.rmi.client.call.handlers=java.util.logging.FileHandler
sun.rmi.client.call.level=FINER

Did you use -Dsun.rmi.client.logCalls="true" ?

Endpoint Protection Client Activity Log

Hello
I'd like to know how long SCCM 2012 keep the Endpoint protection client activity logs (logs of scan,detection, quarantine..etc) and if i can change it?
thanx

HI,
Endpoint Protection history data is deleted after 365 days, it can be controlled in the Site Maintenance task "Endpoint Protection is Delete Aged Endpoint Protection Health Status History Data"
There is also a setting for "Delete Aged Threat Data" which is set to 30 days. It depends on which level of details you are after but it sounds like you should increase the "Delete Aged Threat Data"
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

10.5.4 Server/10.3.9 Client user home mounting issue

Hi all, hopefully someone can help me out with this. I know this might be an AFP issue but if you read on you'll see why I think it might be Open Directory's "fault".
I'm the admin at a school running Leopard Server with Leopard, Tiger, and Panther clients. The server is running Open Directory and is the home for all user accounts.
Leopard and Tiger clients can log in fine. Panther clients begin to login, and between the visual acceptance of the password and actually showing the user's desktop, something goes wrong. It informs me that the user cannot log in at this time because an error occurred, and that the home directory is on an AFP or SMB share.
It's an AFP share, but I don't understand why the Leopard and Tiger clients are kosher and the Panther ones are not.
Advice?
I've already tried turning Kerberos on/off, etc. I have also discovered that I can mount AFP volumes just fine if I log in locally and then connect to the user's account manually via Go-->Connect to Server.
Thanks!

Oops, While playing around I had restricted the service access to just 2 accounts that were not the ones i was testing network logons from. doh!

IMac 27" Late 2013 Wi Fi Log in Issue

Hello everyone,
I apologize if my questions have been asked in the past. I'm completely new to the Apple Mac OS. I bought a new iMac 27" in the middle of 2014 and use it about once or twice a week and have had no issues to-date. I'm still in the process of learning though so my use of it is limited to basic emailing, web browsing and Skype.
In the last 2 weeks I have had problems logging into my Wifi network at home. It would not log on even after I had reset the modem. After trying and rebooting my iMac 3-4 times it would finally do so without changing anything in the it. I'm not sure what is causing it, but thought I would ask here.
What would be causing the log in issue to my Wi Fi network?
Do I need to be concern with the findings in the Etre check?
Startup after logging in my password would take longer than usual...what would be causing it?
Here is the result from the Etre scan. I guess what concerns me is in red...and also if it shows the Wi Fi log in issue.
Thank you in advance for your help and advice.
EtreCheck version: 2.1.8 (121)
Report generated 9 February 2015 11:23:18 am AEST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
 iMac (27-inch, Late 2013) (Technical Specifications)
 iMac - model: iMac14,2
 1 3.4 GHz Intel Core i5 CPU: 4-core
 32 GB RAM Upgradeable
 BANK 0/DIMM0
 8 GB DDR3 1600 MHz ok
 BANK 1/DIMM0
 8 GB DDR3 1600 MHz ok
 BANK 0/DIMM1
 8 GB DDR3 1600 MHz ok
 BANK 1/DIMM1
 8 GB DDR3 1600 MHz ok
 Bluetooth: Good - Handoff/Airdrop2 supported
 Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
 NVIDIA GeForce GTX 780M - VRAM: 4096 MB
 iMac 2560 x 1440
System Software: ℹ️
 OS X 10.9.5 (13F34) - Time since boot: 0:24:23
Disk Information: ℹ️
 APPLE SSD SD0128F disk0 : (121.33 GB)
 EFI (disk0s1) <not mounted> : 210 MB
 Boot OS X (disk0s3) <not mounted> : 134 MB
 Macintosh HD (disk2) / : 1.11 TB (1.04 TB free)
 Encrypted AES-XTS Unlocked
 Core Storage: disk0s2 120.99 GB Online
 Core Storage: disk1s2 999.35 GB Online
 APPLE HDD ST1000DM003 disk1 : (1 TB)
 EFI (disk1s1) <not mounted> : 210 MB
 Recovery HD (disk1s3) <not mounted> [Recovery]: 650 MB
 Macintosh HD (disk2) / : 1.11 TB (1.04 TB free)
 Encrypted AES-XTS Unlocked
 Core Storage: disk0s2 120.99 GB Online
 Core Storage: disk1s2 999.35 GB Online
USB Information: ℹ️
 VIA Labs, Inc. USB3.0 Hub
 VIA Labs, Inc. USB3.0 Hub
 Seagate Backup+ SL 2 TB
 EFI (disk3s1) <not mounted> : 210 MB
 Seagate Backup Plus Drive (disk3s2) /Volumes/Seagate Backup Plus Drive : 2.00 TB (1.82 TB free)
 Recovery HD (disk3s3) <not mounted> [Recovery]: 650 MB
 Initio INIC-3609
 Apple Inc. FaceTime HD Camera (Built-in)
 Apple Inc. BRCM20702 Hub
 Apple Inc. Bluetooth USB Host Controller
 Logitech Inc. Logitech USB Headset H340
 Apple, Inc. Keyboard Hub
 Apple Inc. Apple Keyboard
 VIA Labs, Inc. USB2.0 Hub
 VIA Labs, Inc. USB2.0 Hub
Thunderbolt Information: ℹ️
 Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
 Mac App Store and identified developers
Startup Items: ℹ️
 ProTec6b: Path: /Library/StartupItems/ProTec6b
 Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
 [loaded] com.google.keystone.agent.plist [Click for support]
Launch Daemons: ℹ️
 [loaded] com.adobe.fpsaud.plist [Click for support]
 [loaded] com.bombich.ccc.plist [Click for support]
 [loaded] com.google.keystone.daemon.plist [Click for support]
 [loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
 [failed] com.spotify.webhelper.plist [Click for support]
 [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist [Click for support]
User Login Items: ℹ️
 iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
 Alfred 2 Application (/Applications/Alfred 2.app)
 Spotify 08-26-32-444 Application (/Users/[redacted]/.Trash/Spotify 08-26-32-444.app)
 Dropbox Application (/Applications/Dropbox.app)
 Canon IJ Network Scanner Selector EX Application Hidden (/Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app)
 Speech Startup Application (/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogn ition.framework/Versions/A/Speech Startup.app)
Internet Plug-ins: ℹ️
 FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
 QuickTime Plugin: Version: 7.7.3
 Flash Player: Version: 16.0.0.296 - SDK 10.6 Outdated! Update
 EPPEX Plugin: Version: 3.0.5.0 [Click for support]
 Default Browser: Version: 537 - SDK 10.9
 SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 [Click for support]
 Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
 Flash Player [Click for support]
Time Machine: ℹ️
 Auto backup: YES
 Volumes being backed up:
 Macintosh HD: Disk size: 1.11 TB Disk used: 75.54 GB
 Destinations:
 Seagate Backup Plus Drive [Local]
 Total size: 2.00 TB
 Total number of backups: 33
 Oldest backup: 2014-04-16 03:45:27 +0000
 Last backup: 2015-02-09 01:07:51 +0000
 Size of backup disk: Adequate
 Backup size 2.00 TB > (Disk used 75.54 GB X 3)
Top Processes by CPU: ℹ️
 3% WindowServer
 2% Safari
 2% Google Chrome
 1% fontd
 1% coreaudiod
Top Processes by Memory: ℹ️
 481 MB WindowServer
 309 MB Airmail
 206 MB mds_stores
 206 MB Safari
 172 MB Google Chrome
Virtual Memory Information: ℹ️
 27.13 GB Free RAM
 4.39 GB Active RAM
 1.08 GB Inactive RAM
 1.75 GB Wired RAM
 912 MB Page-ins
 0 B Page-outs
Diagnostics Information: ℹ️
 Feb 9, 2015, 10:58:33 AM Self test - pass

Hi, Jiyujin.
Thank you for visiting Apple Support Communities.
I would need some clarification of the reference to log on and a little more information about the behavior to provide a better answer. However, here is a troubleshooting article that may help.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/HT202222
Cheers,
Jason H.

Send mail to the user who logged the issue

Hi,
As it is currently the mail goes to the key user, which is a business partner. That is an organization. However several users are maintained under a business partner.
So now the mail goes to all these users at a status change. However can we only have the user who logged the issue getting the mail. Can you please advice me on how to get this?
Thanks loads.
Keshi

Hi.. Thanks for all ur replies..
Yes we hv assigned the key user as a business partner which is an organization,, This is also and requirement,
But since the mail is activated as to the key user it goes to all the users in that group, under teh business partner.
But when configuring this came across the Partner, in which we selected it as key user. But there were also other partners as Creator,Reported by etc..
I tried using both these but again it didnt work. Can anyone suggest anything?
Yes, when u assign the key user as a business partner and assign several users to it you can send multiple mails to users
Any help on this is very much appreciated,.,
Thanks all for replying once again.
Keshi

Enterprise Portal Log off Issue for External User

Hello
We are facing a Enterprise Portal log off issue for one of our external users.
User is logged in and clicks on the "Log Off" link .
User is prompted as seen below:
Are you sure you want to logg off?
Choose Yes or No
Click on Yes and popup window goes away and nothing else happens.
These problems logg off issue problem happening on Internet Explorer 6 but from from firefox browser, its working.
Also popups are not blocked on IE.
EP version with SP level is EP 7.00 SP12.
Even though from Internet explorer 6, i can log in and log off with internal user.
Please advise for the log off problem .

Hello
I added the value ume.logoff.redirect.url =https://poqwas.synenco.com/irj/portal
on Config Tool Global Paramter settings.
Then restart the server.
But I am getting the same problem.when I login with external user ID, then make log off. Nothin Happen...
Please advise

LION screen sharing and remote log in issues

Hi,
In Snow Leopard I could access my iMac screen from my macbook and have the iMac restart and allow me to log in and continue to use the iMac.
In Lion I cannot access the log in screen remotely after a restart.
I need to go to the iMac and actually log into it with the keyboard before it will show up again on the network.
I tried to adjust the sharing preferences but nothing is allowing me to manage the iMac and restart it from a different machine.
Once I am logged in the screen sharing works fine. It's the log in issue that is not working for me.
thanks for any help in advance,
christos

i have not been able to get screen sharing to work at all, which has never been a problem for me. i'm registered as an authorized user on both computers, the passwords are correct, but it keeps telling me that the username/passwords don't work. and this is after the computers have already been "connected" using the exact same passwords and user name.

Dreamweaver log in issues

Is there anyone experiencing log in issues to B.C. through Dreamweaver? My log in issue started about a few hours ago. I can log in directly to B.C., but when I try to log in using the same name and password that I've always used, I can't log in.

Hey Legacys7, please PM me your login details and I'll test this for you. If you can access admin you should be able to log in to BC Extension. It's using the same auth system.
Cheers,
mario

BPC 7.5 NW - Client SP6 - Log in Issues

Similar Messages

Maybe you are looking for