BPEL gets deployed on SOA server successfully but it is not available

Hi, I go to http://localhost:7001/em and click on SOA folder in the left panel. I can clearly see the soa_infra(soa_server1) under the SOA folder. There is a default partition under the soa_infra on which I deploy a BPEL application as a jar file (This jar file is generated by the JDeveloper.) The BPEL deploys successfully on the soa_server1 without any issues or error messages. The log file confirms that the BPEL got deployed successfully. Under the default partition on the left panel I can see the name of the BPEL now. I click on the BPEL name and look at the detail page. Over there, the "Test" tab is disabled. There are no instances or faults. Also under the "component Metrics" section, I don't see anything but a message: "Unavailable". I am already spending 3 days trying to find out what may be wrong and resolve the issue but I haven't been successful. Please help! Thanks.

Hi 952205, I start the soa_server1 manually right after I bring up the weblogic. In EM console (localhost:7001/em), I can see the soa_server1 is in "Running" state. There is an error message that comes up when I start the weblogic. It says something about the messaging server and I am not sure if it is related to the problem that I have: "<Error> <oracle.sdp.messaging.client> <SDP-25503> <Unable to connect to the messaging server.
javax.naming.NameNotFoundException: While trying to lookup 'OraSDPM.ejb/sdpmessagingserver/MessagingStoreRemote' didn't find subcontext 'OraSDPM'. Resolved ''; remaining name 'OraSDPM/ejb/sdpmessagingserver/MessagingStoreRemote'"
I basically need to test the BPEL and currently the "Test" tab is disabled.

Similar Messages

  • I'm getting message that amount withdrawn successfully but it's not showing in my bank account

    I'm from India and due to some restrictions paypal amount automatically withdraw to the bank account. I'm getting message that amount is successfully withdrawn but it's not showing in my bank account how many days it will take to appear in bank account?

    How do I now put it on another computer? I only have the license/reg number that is on the software. I'd appreciate whatever help anyone has to give!
    You can still  download the Aperture 3.1 Trial  installer to reinstall Aperture from this webpage - there is a link to the trial and instructions on how to reinstall - don't let the title of this page distract you :
    Aperture 3.4: May quit unexpectedly on launch after updating
    The Aperture 3 serial number will be available in the about panel, when you are running Aperture on your old mac (from the main menu bar: Aperture > About Aperture).
    Regards
    Léonie

  • BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) env

    Hello,
    BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) environment
    Step 1: Build a asynchronous BPEL process which has no extra node. Make and deploy it in 'local windows desktop SOA' server
    The BPEL process has three nodes:
    a. client - on the left side of the swim lane
    b. receiveInput - first node in swim lane (client calls 'receiveInput')
    c. callbackClient - second and last node in the swim lane ('callbackClient' calls client)
    Step 2: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
    Step 3: Now, I can see the successfully completed BPEL instance in the BPEL console.
    Now,
    Step 4: Deploy the same BPEL process (dummy asynchronous) in the SOA server (hosted in unix box)
    Step 5: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
    Step 6: I find that the BPEL instance appears to have ended in error (on the second node i.e. callbackClient )
    With the following error message
    +<invalidVariables xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>9710</code>+
    +</part><part name="summary"><summary>Invalid xml document.+
    According to the xml schemas, the xml document is invalid. The reason is: Error::cvc-complex-type.2.4.b: The content of element 'DummyBPELProcessProcessResponse' is not complete. One of '{"http://xmlns.oracle.com/DummyBPELProcess":result}' is expected.
    Please make sure that the xml document is valid against your schemas.
    +</summary>+
    +</part></invalidVariables>+
    Has anyone faced similar issue as above ?
    i.e. process works find in windows environment (local SOA), but fails in SOA server in UNIX environment
    Appreciate your help in understanding this issue.
    Thanks,
    Santhosh

    Hello,
    The fix to this issue appears to have been as follows:
    +<schema attributeFormDefault="unqualified"+
    +     elementFormDefault="qualified"+
    +     targetNamespace="http://xmlns.oracle.com/DummyBPELProcess"+
    +     xmlns="http://www.w3.org/2001/XMLSchema">+
    +     <element name="DummyBPELProcessProcessRequest">+
    +          <complexType>+
    +               <sequence>+
    +                    <element name="input" type="string"/>+
    +               </sequence>+
    +          </complexType>+
    +     </element>+
    +     <element name="DummyBPELProcessProcessResponse">+
    +          <complexType>+
    +               <sequence>+
    +                    <element name="*:result*" type="string"/>+
    +               </sequence>+
    +          </complexType>+
    +     </element>+
    +</schema>+
    In DummyBPELProcess.xsd,
    modifiying "result" to ":result" appears to have resolved the issue in SOA under unix environment.
    If anyone can explain why "result" works in SOA under windows and ":result" works in SOA under unix environment, I would really appreciate your help.
    Thanks,
    Santhosh

  • Process flow of bpel process deployment in production server

    Hi,
    Can anyone please explain me the process flow of bpel process deployment in prodcution server . I mean the procedure that we follow for deployment in productions server , what are the steps that we follow , approval from any teams? .....
    Thanks,
    Beginner.

    A quick answer is:
    1. make sure you defined the Application/Integration Server in your developer (user/pass you have - if not oc4jadmin then one the IT gave you).
    2. Deploy your project to that server.
    3. Choose the correct domain in the Console when deploying.
    Is this what you wanted to know???

  • I can't log in to game centre but I can log into iTunes. I recently changed my password. I checked the troubleshooter and am getting the message regarding server error but how do I fix this? It doesn't specify this in that article. I don't have firewalls

    I can't log in to game centre but I can log into iTunes. I recently changed my password. I checked the troubleshooter and am getting the message regarding server error but how do I fix this? It doesn't specify this in that article. I don't have firewalls

    Hello sadiepix,
    The following article details several things that can be done to quell iTunes' constant need for authorization.
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Cheers,
    Allen

  • HT5271 I cannot watch utube videos or any film content as of yesterday. I tried to download an updated version. I was successful but that did not change anything. What can i do?

    I cannot watch utube or any other video on my macbook all of a sudden. It says "blocked plug ins". I tried upgrading and was successful but that did not help. I still cannot watch videos. Help! Anyone had this problem and found a sollution?

    After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. Then relaunch Safari and test.
    If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
    click Check Now. Quit and relaunch your browser.

  • HT1386 i have an iphone 4s. Im getting the iphone 5s for christmas, but i do  not have my phone backed up, and my phone is not working and my screen is covered with blue lines. I need help.

    My iphone is not working, i was planning on getting the iphone 5s for christmas, but i do not have my phone backed up on itunes. On my screen are these blue lines across on my screen, and i cant see anthing and i do not know what to do. I want to back up my phone but i cant see my screen to back it up. I need help badly. Thanks apple hope you can help me in this matter.

    You wouldn't need to see the screen to backup unless you have a passcode on the device. Is that the case? You should be able to plug the device into the computer with iTunes and just select backup now.

  • For some reason my google search bar which normally sits in the top right hand side of my screen has disappeared, but my normal search bar still remains. I want to get the google search bar back, but I'm not sure how

    for some reason my google search bar which normally sits in the top right hand side of my screen has disappeared, but my normal search bar still remains. I want to get the google search bar back, but I'm not sure how

    See Here...
    https://discussions.apple.com/message/19334395#19334395

  • I updated my Iphone which is successful but it is not activating.

    I updated my Iphone which is successful but it is not activating.

    Okay.. I guess you can't tell us the complete message.
    This is normally part of a message that indicates the Iphone was jailbroken or unlocked by someone other than the carrier.
    If so, we cannot help you here and you need to work with your carrier.
    We are just users, not Apple support.

  • I downloaded Firefox 4 successfully, but it did not incorporate all my info from previous version (history, bookmarks, tabs, etc.). How do I combine the two?

    Current download of Firefox 4 successful, but it did not include info from the previous version such as bookmarks, history, tabs and the like.

    I am currently using version 3.6.3 because it has all the information that I need to use the internet. version 4.0 did NOT incorporate all history and so forth (including tabs, bookmarks) when I downloaded it, as previous downloads had. I will continue to use the older version until someone can help me figure out how to merge the information from the older version with the newer one. The posted answer was greek to me and did not help.

  • PPTP "MPPE required, but keys are not available"

    Dear all
    Since last reboot of my server I got following errormessage in VPN Logfile when user tries to connect to the server trough PPTP:
    MPPE required, but keys are not available. Possible plugin problem?
    Anyone have an idea, what could be wrong ?
    May as another information: After restart of the server I had problem, that VPN Server was not started, because the L2TP definitions where not correct... Logfile told me. So I have redefined the PPTP and L2TP setting, but disabled the L2TP login, because I have definied this "only" for test purposes. All definitions where made with Server Administrator.
    Before restart of Server Login trough PPTP was working quite well...
    I forgott to say, that the Server (Leopard 10.5.1) is an OD Master, which is working quite well (until now). The authentication type for PPTP is set to MS-CHAP (Kerberos is grayed out, I don't know why)
    Cheers Daniel
    Message was edited by: Daniel Lang

    Here I have now some logfiles from vpnd... may this helps to see the problem I have overseen:
    Wed Dec 12 02:21:21 2007 : Directory Services Authentication plugin initialized
    Wed Dec 12 02:21:21 2007 : Directory Services Authorization plugin initialized
    Wed Dec 12 02:21:21 2007 : PPTP incoming call in progress from 'xxx.xxx.xxx.xxx'...
    Wed Dec 12 02:21:21 2007 : PPTP connection established.
    Wed Dec 12 02:21:21 2007 : using link 0
    Wed Dec 12 02:21:21 2007 : Using interface ppp0
    Wed Dec 12 02:21:21 2007 : Connect: ppp0 <--> socket[34:17]
    Wed Dec 12 02:21:21 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5045e9f1> <pcomp> <accomp>]
    Wed Dec 12 02:21:21 2007 : rcvd [LCP ConfReq id=0x0 <mru 1400> <magic 0xfb9005f> <pcomp> <accomp> <callback CBCP>]
    Wed Dec 12 02:21:21 2007 : lcp_reqci: rcvd unknown option 13
    Wed Dec 12 02:21:21 2007 : lcp_reqci: returning CONFREJ.
    Wed Dec 12 02:21:21 2007 : sent [LCP ConfRej id=0x0 <callback CBCP>]
    Wed Dec 12 02:21:21 2007 : rcvd [LCP ConfReq id=0x1 <mru 1400> <magic 0xfb9005f> <pcomp> <accomp>]
    Wed Dec 12 02:21:21 2007 : lcp_reqci: returning CONFACK.
    Wed Dec 12 02:21:21 2007 : sent [LCP ConfAck id=0x1 <mru 1400> <magic 0xfb9005f> <pcomp> <accomp>]
    Wed Dec 12 02:21:24 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5045e9f1> <pcomp> <accomp>]
    Wed Dec 12 02:21:24 2007 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5045e9f1> <pcomp> <accomp>]
    Wed Dec 12 02:21:24 2007 : sent [LCP EchoReq id=0x0 magic=0x5045e9f1]
    Wed Dec 12 02:21:24 2007 : sent [CHAP Challenge id=0x82 <ea8c6372a227309685ab6c0a36d64aec>, name = "server.anywhere.com"]
    Wed Dec 12 02:21:24 2007 : rcvd [LCP code=0xc id=0x2 0f b9 00 5f 4d 53 52 41 53 56 35 2e 31 30]
    Wed Dec 12 02:21:24 2007 : sent [LCP CodeRej id=0x2 0c 02 00 12 0f b9 00 5f 4d 53 52 41 53 56 35 2e 31 30]
    Wed Dec 12 02:21:24 2007 : rcvd [LCP code=0xc id=0x3 0f b9 00 5f 4d 53 52 41 53 2d 30 2d 50 43 31 36 37]
    Wed Dec 12 02:21:24 2007 : sent [LCP CodeRej id=0x3 0c 03 00 15 0f b9 00 5f 4d 53 52 41 53 2d 30 2d 50 43 31 36 37]
    Wed Dec 12 02:21:24 2007 : rcvd [LCP EchoRep id=0x0 magic=0xfb9005f]
    Wed Dec 12 02:21:24 2007 : rcvd [CHAP Response id=0x82 <41....0>, name = "testuser"]
    Wed Dec 12 02:21:24 2007 : DSAuth plugin: Could not retrieve key agent account information.
    Wed Dec 12 02:21:24 2007 : sent [CHAP Success id=0x82 "S=4020C83B....A M=Access granted"]
    Wed Dec 12 02:21:24 2007 : CHAP peer authentication succeeded for testuser
    Wed Dec 12 02:21:24 2007 : DSAccessControl plugin: User 'testuser' authorized for access
    Wed Dec 12 02:21:24 2007 : MPPE required, but keys are not available. Possible plugin problem?
    Wed Dec 12 02:21:24 2007 : sent [LCP TermReq id=0x4 "MPPE required but not available"]
    Wed Dec 12 02:21:24 2007 : rcvd [CCP ConfReq id=0x4 <mppe +H +M +S +L -D +C>]
    Wed Dec 12 02:21:24 2007 : rcvd [IPCP ConfReq id=0x5 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-wins1 0.0.0.0> <ms-dns3 0.0.0.0> <ms-wins3 0.0.0.0>]
    Wed Dec 12 02:21:24 2007 : rcvd [LCP TermAck id=0x4 "MPPE required but not available"]
    Wed Dec 12 02:21:24 2007 : Connection terminated.
    Wed Dec 12 02:21:24 2007 : Connect time 0.1 minutes.
    Wed Dec 12 02:21:24 2007 : Sent 0 bytes, received 0 bytes.
    Wed Dec 12 02:21:25 2007 : PPTP disconnecting...
    Wed Dec 12 02:21:25 2007 : PPTP disconnected
    2007-12-12 02:21:25 CET --> Client with address = 192.168.yyy.yyy has hungup

  • MPPE required, but keys are not available.

    I am trying connect my home computer to my office(MAcOS x Server)
    error on MacOS X Server Log
    Tue Sep 26 20:16:59 2006 : sent [CHAP Success id=0x1e "S=A1ED1D0E3ABF7A4187D8F43458C7C0C5F487B9AE M=Access granted"]
    Tue Sep 26 20:16:59 2006 : DSAccessControl plugin: User 'ppina' authorized for access
    Tue Sep 26 20:16:59 2006 : MPPE required, but keys are not available. Possible plugin problem?
    Tue Sep 26 20:16:59 2006 : sent [LCP TermReq id=0x2 "MPPE required but not available"]
    Tue Sep 26 20:16:59 2006 : rcvd [CCP ConfReq id=0x1 <mppe +H -M +S +L -D -C>]
    Tue Sep 26 20:17:00 2006 : rcvd [LCP TermAck id=0x2]
    Tue Sep 26 20:17:00 2006 : Connection terminated.
    Tue Sep 26 20:17:00 2006 : Connect time 0.0 minutes.
    Tue Sep 26 20:17:00 2006 : Sent 0 bytes, received 0 bytes.
    Tue Sep 26 20:17:00 2006 : PPTP disconnecting...
    Tue Sep 26 20:17:00 2006 : PPTP disconnected
    2006-09-26 20:17:00 WEST --> Client with address = 172.16.12.119 has hungup

    run this
    code:
    sudo vpnaddkeyagentuser
    authenticate as your admin and then if it does not give an error you should be all set.
    See this http://docs.info.apple.com/article.html?artnum=107915 for more info (it talks about an LDAP server but when I tried to add that 'user' to my LDAP server it did not help, so I added it locally (which is what the above command does) and then viola!)
    Peter
    PowerMac G5 Dual 2.5Ghz   Mac OS X (10.4.6)   Server

  • When I recently update to photoshop 2014 I lost my access inside photoshop to perfect effects 8.  I still have it on my laptop but it is not available to load as an extension?

    When I recently update to photoshop 2014 I lost my access inside photoshop to perfect effects 8.  I still have it on my laptop but it is not available to load as an extension?

    What OS do you have?  You say you have explained what you had (computer/opsys) but I honestly don't see it here.  If you had mentioned that my advice would have been different; I believe you can only upgrade as far as Camera Raw 8.3 on an older Windows system.  There is more information here (look specifically for the "Revert to 8.3 ..." titles).
    Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista
    What you've done/written in your last post confuses things further, unfortunately.  Photoshop 13.1 is strictly a Creative Cloud version.  The highest you can go is Photoshop CS6 13.0.1.3 with perpetual license.
    And as far as I can recall, that version can work on Windows back to XP:
    System requirements | Photoshop
    I don't think you're out of luck, but you seem to be leaping into doing things without having the full story, and are jumping to conclusions a bit too quickly.
    Here's what I suggest you try:
    1.  Remove Photoshop entirely with the Creative Suite Removal Tool: 
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    2.  Install Photoshop CS6 from your original media or from here: 
    Download CS6 products
    3.  Update the application using its own Help - Updates process.  That really should get you the latest Camera Raw version that will work.  If that does not bring you a Camera Raw that works with your Nikon, use the "Revert to 8.3" instructions above.
    -Noel

  • I am trying to create mp3 version of itune songs.  I have gone through the preference sequence to be mp3 encoder but this is not having any effect.  I have also tired from file tab to create a version but this is not available to action

    I am trying to create mp3 version of itune songs.  I have gone through the preference sequence to be mp3 encoder but this is not having any effect.  I have also tired from file tab to create a version but this is not available to action showing as lite grey.
    Any help would be appreciated

    I am trying to create mp3 version of itune songs.  I have gone through the preference sequence to be mp3 encoder but this is not having any effect.  I have also tired from file tab to create a version but this is not available to action showing as lite grey.
    Any help would be appreciated

  • After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone help?

    After upgrading to Yosemite I have lost iPhoto. It has a cross through it in Finder, but I clicked on it and I was directed to download the latest version from the App store, but it is not available in the Australian store. Can anyone please help? I am not an advanced user and I would like my photos back, having had no idea I would lose iPhoto in the upgrade!

    Thanks petermac87...but for some reason, the only purchases showing are OS. So assuming iPhoto is in Mountain Lion, I was hoping to look under Hidden Items there as you suggested, but there is no option for that. Only option is to download Mountain Lion again, not iPhoto specifically. Any ideas welcome!

Maybe you are looking for