BPM - check message existance

I have a bpm build to receive two messages(2 files) and merge them. I have a deadline branch setup to raise an exception after 3 minutes.
Now, I need to verify after 3 minutes whether I have both messages or not. If I don't have one of the messages, I need to terminate the process. How do I check whether I have both messages or not.
Thanks for your help..RP

you should create block and use coorelation if the message step expected did not come with in the timeframe defined then the control will go to deadline step of block and performs the operation defined there.
So checking the message is the job of the BP engine at runtime if message didnt receive within timeframe defined then deadline branch will be executed you dont need to chk the message existence in deadline step
I hope this clears you
Rajesh

Similar Messages

Popup to download firefox 4 timed out after install ran about a minute and now will not load or let me download FF 4 or remove FF3.6 (Message: checking for existing installation)

I got a popup balloon to update to Firefox 4. I clicked it and after running the install for about a minute, it quit and I got a message saying it had timed out. It gave me the website to go to to manually install it. I downloaded the manual install for FF 4, but when I tried to run it, the Firefox Setup Wizard said it was "checking existing installation" and then brought up a window saying Firefox must be closed to run the install. Firefox was not open. I tried to open it and it won't open. I then tried to delete it in my "Add/Remove Programs" (Windows XP Home Edition). I got the same messages: that it was checking the existing installation and that I had to close all firefox programs before I could delete it. I'm out of ideas.

I got a popup balloon to update to Firefox 4. I clicked it and after running the install for about a minute, it quit and I got a message saying it had timed out. It gave me the website to go to to manually install it. I downloaded the manual install for FF 4, but when I tried to run it, the Firefox Setup Wizard said it was "checking existing installation" and then brought up a window saying Firefox must be closed to run the install. Firefox was not open. I tried to open it and it won't open. I then tried to delete it in my "Add/Remove Programs" (Windows XP Home Edition). I got the same messages: that it was checking the existing installation and that I had to close all firefox programs before I could delete it. I'm out of ideas.

BPM sending messages to wrong inbound interfaces in PI and target system

Hi All,
i am doing File to proxy scenarion using bpm.i am receiving three files,two files splitting on based condition(location code) in receiver determination and sending to bpm(here one bpm receiving 3 files then it merges 3 files into one proact and some promo messages based promos in source file ,same in the second bpm with 2 files with different mapping,here target system is SAP APO SNC).i am doing testing now mapping and every thing is working fine.but first bpm sending messages(proact and promo messages) target sytem side (proact_in and promo_in)inbound inrefaces.if i am executing scenario both bpm sending (proact and promo) messaegs in target system its showing wrong bpm name.in target system also we can check messgaes sxmb_moni.
ex:if first bpm A sending 1 proact and 2 promos,and second bpm B sending 1 proact and 2 promos to target system,but in target syetm its showing sender component as 1st bpm A for 3 promo messages(here B bpm messages sending with A bpm viceversa i did the configuration correctly) and for 1 its showing second bpm. please give me suggetions how to resolve this issue.
Thanks,
seshagiri.

Is the connection to SNC via idocs or proxies. If it's via idocs can you check the control record and see if the issue is not there ?

No Messages exist

I am loading FI data to Dso 0FIAR_O03 From data source 0FI_AR_4.
data was loaded to psa succesfully.
when i created DTP and executed, the status of all messages under details tab were in green.
But when i check the content in target i dint find any data except header and in task bar i got msg as " No messages Exists" in green.
I dint find the relavent solution. can u please guide me.
Regards,
Eswari

Error at Activation of data under "SID generation" node is happened particularly in Data Package 22 and 37.

No Messages Exist - In InfoCube

Hi,
I have loaded flat file data in to the InfoCube and When I check the infocube content I'm unable to see any records in that.
And I'm getting a message as 'No Messages Exist'
Please tell me what could be the errors.
Thanks

Hi Ahmed,
do you see records at PSA, at Cube right click -> manage -> check how many transfered and added records and check the load status.
if added records are there, you can see the data with contents tab and select fields for output......
Best Regards.
Edited by: Daya Sagar on Aug 31, 2009 7:32 AM

Further error messages exist for this transaction

Hello all ,
i am getting en error message "Further error messages exist for this transaction" while creating an opportunity from external number ranges
please help me out how to solve this.
Regards
Ahmad

Hi Mohammad,
There might be any error transaction so there suppose to be an error insystem status. If you are able to generate opportunity number after saving than please do check in GUI with transaction crmd_order and check the message detail and revert.message detail is needed in order to proceed further.
Thanks,
Prem

Error - No SAPscript message exists

Hi,
I am try to print a sales document into form, Gettin the following fatal error - No SAPscript message exists.
TD 000: No SAPscript message exists
Any one came across this error.
Cheers
Senthil

Hi,
R u using The Print_TEXT FM?
Then Go through the following link.
[http://help.sap.com/saphelp_nw04/helpdata/en/d6/0dba00494511d182b70000e829fbfe/frameset.htm]
If not then try to debug the SAPScript and Check in which Fm u r getting the error.
Regards
Sandipan

Hello, I have already bought FIFA 14 unlock pack.But now I've installed on my iPod and make check for existing purshase and it happen ''The Apple ID you entered couldn't be found or your password was incorrect.'' What that means?

Please help me

What do you mean by ""make check for existing purchase and it happens (error message)."
Just what are yo doing when yo get that error message?

Why do I have to close out of email and reopen it to check messages?

Usually if I do not close out of an email session, when I go to check my messages later my mailboxes show a "!" symbol, indicating there is an issue; additionally, messages that I am trying to send do not go. Once I close out and sign back in I am able to receive and send messages with no problem.
This is only on an issue when I am using the mail function on my iMac - not when I am checking from other computers; and
This is not a password problem. The only thing I need to do to receive messages is close and reopen the application - once I do that, messages are received (and sent) without problems.
I don't recall if I have this issue when checking mail from me.com on my home computer or others, as I rarely check messages from there.
I have an iMac 7.1 with OS 10.6.8 (not 10.4.11 as mistakenly checked off below). This has been happening for several weeks, if not months, but since closing out and getting back into Mail was not a problem I haven't reported the issue until now. Thank you very much for any assistance you can provide.

Try using one of these extensions:
Cookie Swap extension:
https://addons.mozilla.org/firefox/3255/
or
Cookie Pie extension:
http://www.nektra.com/oss/firefox/extensions/cookiepie/

StorE steel 640GB - data error (cyclic redundancy check) message

Hi
I have had the StorE drive for a few months, so lots of data on it.
Today windows detects it as a local drive and when I attempt to access it I get a message telling me the disk needs to be formatted, when I select no, I get a message saying *data error (cyclic redundancy check*) message.
Help.
I have tried two other laptops, both give same response.
Thanks
Guy

Hi, thx for the reply.
I ran chkdsk see below.
C:\Users\DADDIO>chkdsk/f
The type of the file system is NTFS.
Cannot lock current drive.
Chkdsk cannot run because the volume is in use by another
process. Would you like to schedule this volume to be
checked the next time the system restarts? (Y/N)
help!
Guy

How to check message Holding capacity in PI 7.1

Hi All,
How to check message holding capacity in PI 7.1
Thanks
Dayakar

Hi Stefan,
I placed the SDA file in the JSPM inbox directory and the JSPM could not detect this file as hotfix. I am getting the following error, it looks like i need to use the Netweaver developer stuido to deploy the SDA files.
I am getting the following error even after placing the sda file in the respective directory.
No applicable development component(s) found for deployment in Inbox directory
sappn5\sapmnt\trans\EPS\in.
Thanks,
Srini
Edited by: srinivas kapu on Oct 7, 2008 6:57 AM

This script is not checking the existing of the new created item

Dear Friends
I have This script is not checking the existing of the new created item I am using this script in side WHEN-BUTTON-PRESSED trigger
I am using oracle Forms [32 Bit] Version 6.0.8.11.3 (Production)
My script as the following :
BEGIN
BEGIN
SELECT ITEM_CODE INTO :GLOBAL.DUMMY
FROM IM_INVENTORY
WHERE ITEM_CLASS = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.ITEM_CLASS)))
AND ITEM_TYPE = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.ITEM_TYPE)))
AND ITEM_LENGTH = :IM_NEW_ITEMS.ITEM_LENGTH
AND ITEM_WIDTH = :IM_NEW_ITEMS.ITEM_WIDTH
AND ITEM_HIGHT1 = :IM_NEW_ITEMS.ITEM_HIGHT1
AND ITEM_HIGHT2 = :IM_NEW_ITEMS.ITEM_HIGHT2
AND COLOR_CODE = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.COLOR_CODE)))
AND SHAPE_CODE = TO_NUMBER(RTRIM(LTRIM(:IM_NEW_ITEMS.SHAPE_CODE)));
-- get_err_message(87);
SHOW_MESSAGE('This Item Already Exist !!!');
RAISE FORM_TRIGGER_FAILURE;
EXCEPTION
WHEN NO_DATA_FOUND THEN
show_message('here');
INSERT INTO IM_INVENTORY
(ITEM_CODE,ITEM_NAME_A,ITEM_NAME_E,STOCK_ITEM,ITEM_CLASS,ITEM_TYPE,SUPP_CODE,ITEM_LENGTH,ITEM_WIDTH,
ITEM_HIGHT1,ITEM_HIGHT2,COLOR_CODE,SHAPE_CODE,ITEM_SIZE_TYPE,VOLUME,CON_FACTOR,ITEM_PRICE1,
ITEM_DISCOUNT,MIN_QTY,MAX_QTY,COSTING_METHOD,ITEM_COST,STANDARD_COST,WEIGHT,ITEM_PRICE2,ITEM_PRICE3,
OPENING_COST,LAST_PUR_COST,QTY_FOR_PRICE2,QTY_FOR_PRICE3,ITEM_PRICE_METHOD,USER_ID,USER_DATE)
VALUES(:IM_NEW_ITEMS.ITEM_CODE,:GLOBAL.LOC_VAR_A,:GLOBAL.LOC_VAR_E,'1',:IM_NEW_ITEMS.ITEM_CLASS,:IM_NEW_ITEMS.ITEM_TYPE,'0',
:IM_NEW_ITEMS.ITEM_LENGTH,:IM_NEW_ITEMS.ITEM_WIDTH,:IM_NEW_ITEMS.ITEM_HIGHT1,:IM_NEW_ITEMS.ITEM_HIGHT2,
NVL(:IM_NEW_ITEMS.COLOR_CODE,0),NVL(:IM_NEW_ITEMS.SHAPE_CODE,0),1,NVL(:IM_NEW_ITEMS.VOLUME,0),1,:GLOBAL.ITEM_PRICE1,0.00,0.00,0.00,'1',0.00,0.00,
0.00,:GLOBAL.ITEM_PRICE1,:GLOBAL.ITEM_PRICE1,0.000,0.000,0.000,0.000,1,:IM_NEW_ITEMS.USER_ID,:IM_NEW_ITEMS.USER_DATE);
standard.commit; -- NEW COMMITED
clear_message; -- NEW COMMITED
     WHEN FORM_TRIGGER_FAILURE THEN
     SHOW_MESSAGE('Error : '||SQLERRM);
RAISE FORM_TRIGGER_FAILURE ;
WHEN OTHERS THEN
SHOW_MESSAGE('Error : '||SQLERRM);
RAISE FORM_TRIGGER_FAILURE ;
END;
END;
Waiting for your valuable answer .
Best regards
Jamil Alshaibani

Hi,
I have written the script also with constants values but still it is not going to
SHOW_MESSAGE('This Item Already Exist !!!');
and the script is written as the following :
BEGIN
SELECT 1 INTO :GLOBAL.DUMMY
FROM IM_INVENTORY
WHERE ITEM_CLASS ='110'
AND ITEM_TYPE ='110105'
AND ITEM_LENGTH = 1
AND ITEM_WIDTH = 1
AND ITEM_HIGHT1 = 1
AND ITEM_HIGHT2 = 0
AND COLOR_CODE = '3001'
AND SHAPE_CODE = '201' ;
SHOW_MESSAGE('1- This Item Already Exist !!!');
RAISE FORM_TRIGGER_FAILURE;
EXCEPTION
WHEN NO_DATA_FOUND THEN
show_message('here');
INSERT INTO IM_INVENTORY
(ITEM_CODE,ITEM_NAME_A,ITEM_NAME_E,STOCK_ITEM,ITEM_CLASS,ITEM_TYPE,SUPP_CODE,ITEM_LENGTH,ITEM_WIDTH,
ITEM_HIGHT1,ITEM_HIGHT2,COLOR_CODE,SHAPE_CODE,ITEM_SIZE_TYPE,VOLUME,CON_FACTOR,ITEM_PRICE1,
ITEM_DISCOUNT,MIN_QTY,MAX_QTY,COSTING_METHOD,ITEM_COST,STANDARD_COST,WEIGHT,ITEM_PRICE2,ITEM_PRICE3,
OPENING_COST,LAST_PUR_COST,QTY_FOR_PRICE2,QTY_FOR_PRICE3,ITEM_PRICE_METHOD,USER_ID,USER_DATE)
VALUES(:IM_NEW_ITEMS.ITEM_CODE,:GLOBAL.LOC_VAR_A,:GLOBAL.LOC_VAR_E,'1',:IM_NEW_ITEMS.ITEM_CLASS,:IM_NEW_ITEMS.ITEM_TYPE,'0',
:IM_NEW_ITEMS.ITEM_LENGTH,:IM_NEW_ITEMS.ITEM_WIDTH,:IM_NEW_ITEMS.ITEM_HIGHT1,:IM_NEW_ITEMS.ITEM_HIGHT2,
NVL(:IM_NEW_ITEMS.COLOR_CODE,0),NVL(:IM_NEW_ITEMS.SHAPE_CODE,0),1,NVL(:IM_NEW_ITEMS.VOLUME,0),1,:GLOBAL.ITEM_PRICE1,0.00,0.00,0.00,'1',0.00,0.00,
0.00,:GLOBAL.ITEM_PRICE1,:GLOBAL.ITEM_PRICE1,0.000,0.000,0.000,0.000,1,:IM_NEW_ITEMS.USER_ID,:IM_NEW_ITEMS.USER_DATE);
standard.commit; -- NEW COMMITED
clear_message; -- NEW COMMITED
     WHEN FORM_TRIGGER_FAILURE THEN
     SHOW_MESSAGE('Error : '||SQLERRM);
RAISE FORM_TRIGGER_FAILURE ;
WHEN OTHERS THEN
SHOW_MESSAGE('Error : '||SQLERRM);
RAISE FORM_TRIGGER_FAILURE ;
END;
Best regards
Jamil

BPM Collect Message dependent AND time dependent

Hi
I have a IDOC to file scenario where I have to collect all the IDOC until I receive a stop IDOC.
Once the End collect IDOC is received I have to do a n:1 transformation and write the file to the FTP.
The problem is, at times the IDOC which is suppose to end the collect loop gets stuck in ECC R3 system.
So Im wondering If I can do something like say, we have two options inside BPM both time dependent and message dependent.
In this case which ever comes first (the Stop/END IDOC or the Time say 3 mins) will end the collect process.
Can anyone pls suggest will it work and if so what are the additional steps I have to introduce in the BPM.
Pls advice.
Right Now these are the steps in the BPM Collect Message dependent.
1. Block (I have used correlation)
2. Fork inside the block
3. Fork branch one has a look with end condition as 1=1; then a receive step and a container operation inside the loop.
4. Fork branch two receives the end collect idoc.
5. Transform step outside the block.
6. Send step.
Thanks
Prasanna

Hi Abhishek/ Raj
Thanks!!
I have done the changes let me confirm after testing it once. In the mean time I have one more question regarding the same BPM, as I have mentioned in the first post, the BPM contains the 6 steps mentioned but the the 6th step is inside another block (Block2).
The steps 1 to 4 are inside Block1.
The step 5 ie the transformation step (n:1) is in between the Blocks ie not inside any block (hope im not confusing).
The second block is for sending the file to the FTP and based on the acknowledgement (transport level) I have to send an email.
So Block2 already contains a deadline branch, it is to wait for the positive acknowledgement for say 3 mins and send the error email if incase we dont get positive ack within the time limit.
My doubt is,
1. Is it the only way (having two block and two wait steps) to achieve this.
(one block for collecting and one block for ack)
2. Is there any way I can have a single Block in the BPM insted of two. If so what are the steps.
Having single block, Will improve anything??
Thanks
Prasanna

CPU time of BPM or message mapping?

Hi all,
is there a way to find out how much CPU time is spent by a certain BPM instance (or message mapping instance)?
It would be sufficient to get that value per BPM type / message mapping type.
So far, I've found the following sources, which all won't work, unfortunately:
- table SWWWIHEAD: No CPU time information (as far as I see)
- transaction STAD: I don't see a way to connect an entry to the resp. BPM. There is a Transaction-ID, but I can't find it in the BPM...
- transaction ST03N: Only aggregated values for user WF_BATCH, not detailed statistics
- several places, which only show clock time, but not CPU time
Thanks in advance!
Kind regards,
Dennis

Hi Michal,
Thanks a lot for your info.
Too bad that there is no other possibility yet.
I'm not completely sure whether the result is worth the effort, though, as there will probably be a lot of different BPM types on this system, so benchmarking each is quite some work (and requires an otherwise idle test system during this time).
In addition, it could be difficult to generate test data that will most likely represent the expected data during production use. Especially for BPMs with many conditional tasks (branches, loops, ...), this can be a mess...
But I will propose it anyway. If it gets accepted, I'll post the gained experience with this approach here. Maybe it works better than my pessimistic expection.
Hopefully, SAP will integrate this functionality somewhen. I guess I set up some customer feedback.
Kind regards,
Dennis

Check Conversion Exists in SAP Query

Hi Experts,
In our SAP HCM, we can interchangebly use SAP pernr and Singapore NRIC in PERNR field. SAP has provided a utility to map Singapore NRIC with SAP number in the pernr field based on IT185.
SAP number can only been seen in Txn Code SE16. After displaying the results, click on
Settings > User parameters > Data Browser > Format > Check conversion exists.
On switching off this option, SAP number is displayed instead of NRIC.
When running Ad-hoc or SAP query, the system is displaying Singapore NRIC in the PERNR field. Our users want to have both the options so as to display NRIC and SAP number in this field.
I have checked, there is no 'Check Conversion Exists' function avaliable in SAP / Adhoc query.
Does anyone know, if it is possible to display SAP number in the PERNR field in query. Any help will be greatly appreciated. Thanks.
Rgds,
AJ

Hi, 
If it SAP query from infoset then you have to use action infotype and select pernr.
If it is standalone SAP adhoc Query, then create/ change the query to add table PA0001 and PA0185. Join it with pernr field, In the output select the pernr and NIRC number.
Good luck 
Thanks,
Amosha
 "Known is a drop & unknown is an OCEAN!"

BPM - check message existance

Similar Messages

Maybe you are looking for