BPM - Create process error - red flag in monitor

Hi.
I have a question about generating errors in a BPM.
The scenario is like this:
After some process I have a switch. In case of an error, the switch branch to a control step that throws an exception. A control step afterwards cancels the process.
Everything works like it should, but in the monitor, every process step has a sucessfull flag. I would like the process to fail somehow, so the process step indicates an error.
We do not use the alert framework!
Anyone got an idea?
Regards...
Peter

Peter,
I got your flow. You need to do the below steps in order to achieve your scenario.
--Place a block. In Block Properties enter Exception name[ Anything as ur wish]
--Place the Switch step inside the Block.
-- As per your above logic check for TYPE =E and place the Control block in the corresponding brach.
-- Control Block choose Action as "Throw Exception" and Exception as defined in Step 1.
-- Remember don't insert any Exception branch and catch the exception, then you won't get any errorrs. If you want the BPM to be errord out then follow the steps mentioned above.
If you have any doubts, please revert back.
raj.

Similar Messages

  • Process  Error in the Application Monitor

    Dear All
    we currently have the below shown Process  Error in the Application Monitor. it is absolutely impossible to delete them.
    What can cause this problem, please I need a solution on how to remove them for ever.
    Application Monitors
    Shopping Cart 
    Shopping Cart :  Not transferred to backend 
    Date  Time  Error Message 
    26.03.2011  00:29:36    
    26.03.2011  01:29:36    
    Shopping Cart :  Backend application errors 
    Date  Time  Error Message 
    25.03.2011  12:22:06
    Kind Regards
    Marco

    Hi,
    Try to locate the error in RZ20 transaction and delete it from there, then refresh your application monitor.
    regards,
    MRao

  • Create process error 740 the requested operation requires elevation

    Hi Friends,
    I'm trying to launch Virtual KeyBoard from my application. I'm using jdk1.6.0_02. (I also tried on jdk1.3 , which throws same exception as of jdk1.6.0_02)
    try{
                Runtime.getRuntime().exec("C:\\Windows\\system32\\osk.exe");
            catch(IOException ex){
                System.out.println(ex.getMessage());This works fine on Windows XP , but on Windows Vista it throws exception :
    Can not run Program "C:\Windows\System32\osk.exe" :create process error 740 the requested operation requires elevation
    It works on Vista if I turn off user Account control from User Account in ControlPanel.
    While If I try to launch (Calculator)Calc.exe instead of (Virtual KeyBoard)osk.exe then it launch successfully without turning off User Account Control.
    Does any one has an idea how can I launch Virtual Keyboard ("osk.exe") without turning off user Account Control on Windows Vista.
    I'll appreciate any help regarding this topic.
    Thanks.

    Thanks for your promt reply.
    The llink you write is not launching the page.
    My question is why it launching Calculator without any privillage, while it has problem in launching Visual KeyBoard.
    Thanks

  • Create process error 2

    I am an Oracle developer running oracle 9i Db and oracle 9iAs
    using Jinititor on my browser.
    I am trying to get a form to run Local Host commands. I have downloaded
    host.jar from Oracle and have certified and checked that is certified
    using the Java Console.
    When i try to execute a host command, say dir c: or start notepad,
    the error message
    java.io.ioexception create process error = 2 always comes up.
    i am trying to find out what error 2 means and finding very difficult
    to discover so that i can try and resolve my problem.
    So, what is error 2 and how can i resolve it ??
    any hints/help would be appreciated

    To execute a dos command from java you must use a batch file or something like this:
    Runtime.getRuntime().exec("cmd /c <your command>");

  • Create process error =2 wat should i do

    in this case i am interrupted wth create process error -2 wat shuld i do can any one help me out.in this case try is a batch file in same folder of the program
    static void call()
    try
    Process proc = Runtime.getRuntime().exec("try");
    proc.waitFor();
    catch(InterruptedException e1)
    catch(IOException e)
    System.out.println("---"+e);
    Edited by: coolsunny on Mar 8, 2009 10:48 AM

    coolsunny wrote:
    in this case i am interrupted wth create process error -2 wat shuld i dosomething like
          Process proc = Runtime.getRuntime().exec(new String[]{"cmd.exe", "/C", "try.bat"});[more here|http://mindprod.com/jgloss/exec.html#OVERLOADED]

  • Permenant error in bpm inbound processing error in inbound queue of pi7.1

    Hi Experts,
                 In  E filling scenario in SAPPI7.1, iam facing a problem. i.e In sxmb_moni message monitoring, the  message was schedule at outbound side.when i extend that, the message was stuck in smq2 with "permenant error in bpm inbound processing".can any one please tell me how to relove this issue.
    Thanks & Regards,
    Giri.

    Hello
    Check the note #1126656     BPE-TS: Permanent errors in the BPE inbound processing. This describes some possible causes and solutions for this error.
    Regards
    Mark

  • Io Exception error , create process  -  error comes for the below program

    DOS-Commands from a JavaTM application
    import java.lang.* ;
    import java.io.* ;
    public class Test
    public static void main(String[] args)
    try
    String [] cmd = {"cmd.exe","/c","dir"} ;
    Process m ;
    String S = "" ;
    m = Runtime.getRuntime().exec(cmd) ;
    BufferedReader in =
    new BufferedReader(new InputStreamReader(
    m.getInputStream()));
    while((S=in.readLine()) != null)
    System.out.println(S) ;
    catch(Exception ex)
    ex.printStackTrace () ;

    And what does the error message say, exactly?

  • BPM 11.1.1.6 error creating process instance

    Hello!
    I am deploying BPM processes using JDeveloper 11.1.1.5 and SOA Server 11.1.1.6 and I am getting the following error:
    [2012-12-04T19:11:47.209+01:00] [WLS_SOA1] [NOTIFICATION] [] [oracle.integration.platform.blocks.tenant] [tid: [ACTIVE].ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: j.pla] [ecid: 004o0fC^L8nFw000jzwkno0003VU000K3D,0:1] [APP: soa-infra] [URI: /bpm/workspace/faces/jsf/worklist/worklist.jspx] NM or Event does not contain property, apps.context.header or fabric.enterpriseId
    [2012-12-04T19:11:47.614+01:00] [WLS_SOA1] [NOTIFICATION] [] [oracle.fabric.common.wsdl] [tid: [ACTIVE].ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: j.pla] [ecid: 004o0fC^L8nFw000jzwkno0003VU000K3D,0:1] [APP: soa-infra] [composite_name: Generico] [component_name: Generico] [component_instance_id: 120045] [URI: /bpm/workspace/faces/jsf/worklist/worklist.jspx] XMLSchema incremental build enabled.
    [2012-12-04T19:11:47.681+01:00] [WLS_SOA1] [ERROR] [] [oracle.soa.bpmn.engine.bpmn] [tid: [ACTIVE].ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: j.pla] [ecid: 004o0fC^L8nFw000jzwkno0003VU000K3D,0:1] [APP: soa-infra] [composite_name: Generico] [component_name: Generico] [component_instance_id: 120045] [URI: /bpm/workspace/faces/jsf/worklist/worklist.jspx] BPELFault {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} current Operation {INSTANCE_SUSPENDED}
    [2012-12-04T19:11:47.690+01:00] [WLS_SOA1] [ERROR] [] [oracle.bpm.services.instanceManagement] [tid: [ACTIVE].ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: j.pla] [ecid: 004o0fC^L8nFw000jzwkno0003VU000K3D,0:1] [APP: soa-infra] [URI: /bpm/workspace/faces/jsf/worklist/worklist.jspx] Initiate task could not be created for unknown reason for target process 'default/Generico!1.3*/Generico'. Verify server log for error cause.
    [2012-12-04T19:11:47.690+01:00] [WLS_SOA1] [ERROR] [] [oracle.bpm.services.instanceManagement] [tid: [ACTIVE].ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: j.pla] [ecid: 004o0fC^L8nFw000jzwkno0003VU000K3D,0:1] [APP: soa-infra] [URI: /bpm/workspace/faces/jsf/worklist/worklist.jspx] Exception[[
    exception.70204.type: error
    exception.70204.severity: 2
    exception.70204.name: Error creating process instance.
    exception.70204.description: Error creating instance for target process default/Generico!1.3*/Generico.
    exception.70204.fix: Verify server log to find the problem cause.
    [2012-12-04T19:11:47.803+01:00] [WLS_SOA1] [WARNING] [] [oracle.bpm.common] [tid: [ACTIVE].ExecuteThread: '9' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: j.pla] [ecid: 004o0fC^L8nFw000jzwkno0003VU000K3D,0:1] [APP: OracleBPMWorkspace] [URI: /bpm/workspace/faces/jsf/worklist/worklist.jspx] Error creating instance for target process default/Generico!1.3*/Generico.[[
    oracle.bpm.web.exception.WapiOperationException: Error creating instance for target process default/Generico!1.3*/Generico.
         at oracle.bpm.workspace.model.common.ExecutionBean.handleExternalInstanceExecution(ExecutionBean.java:188)
         at oracle.bpm.workspace.model.application.ApplicationBean.execute(ApplicationBean.java:148)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.sun.el.parser.AstValue.invoke(AstValue.java:187)
         at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297)
         at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
         at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
         at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
         at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:148)
         at org.apache.myfaces.trinidad.component.UIXTable.broadcast(UIXTable.java:279)
         at oracle.adf.view.rich.component.UIXTable.broadcast(UIXTable.java:145)
         at oracle.adf.view.rich.component.rich.data.RichTable.broadcast(RichTable.java:402)
         at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
         at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
         at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
         at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
         at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
         at oracle.adf.view.rich.component.fragment.UIXRegion.broadcast(UIXRegion.java:148)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
         at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
         at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
         at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
         at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
         at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:1018)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:386)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:194)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
         at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3738)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3704)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2281)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2180)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1491)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused by: fuego.papi.exception.CannotCreateInstanceException: Cannot create instance in process 'default/Generico!1.3*/Generico'.
         at oracle.bpm.papi.ora.helper.ExceptionHelper.wrapException(ExceptionHelper.java:58)
         at oracle.bpm.papi.ora.util.ApplicationExecution11G.beginExecution(ApplicationExecution11G.java:56)
         at fuego.papi.utils.ApplicationExecution.beginExecution(ApplicationExecution.java:29)
         at oracle.bpm.workspace.model.common.ExecutionBean.handleExternalInstanceExecution(ExecutionBean.java:171)
         ... 99 more
    Caused by: BPM-70204
    Exception
    exception.70204.type: error
    exception.70204.severity: 2
    exception.70204.name: Error creating process instance.
    exception.70204.description: Error creating instance for target process default/Generico!1.3*/Generico.
    exception.70204.fix: Verify server log to find the problem cause.
         at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:205)
         at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
         at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
         at oracle.bpm.services.instancemanagement.ejb.InstanceManagementServiceBean_sqa2w0_IInstanceManagementServiceRemoteImpl_1036_WLStub.createProcessInstanceTask(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
         at $Proxy501.createProcessInstanceTask(Unknown Source)
         at oracle.bpm.papi.ora.util.ApplicationExecution11G.beginExecution(ApplicationExecution11G.java:50)
         ... 101 more
    Could you please help me? I have search through the forum but I couldn't find anything that solves my problem. As I've read in this post (https://kr.forums.oracle.com/forums/thread.jspa?messageID=10596716), I've tried to set the value of the variable bpel.config.transaction to requiresNew instead of required but it isn't working.
    I suppose it has to do with the new version of the server but I can't find anything to solve it :(
    Thank you in advance!!! I hope you can help me!
    Best regards.

    Frank,
    I tried to follow the example. This is the file: http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_53/labs/restsolution.zip
    The other part of the exercise is to develop an ADF Client.
    At "Step 5: Create the Model Components" when I create the URL_Get the error appears and don't create the datacontrol.
    I check the links and RESTConn and are OK.
    I hope this helps.
    JP
    Edited by: jpvadell.oracle on Jul 2, 2012 11:54 AM

  • Split mapping created no message-how to avoid red flag message in SXMB_MONI

    Hi,
    In my scenario I'm putting files in an external server with multi mapping and a condition in graphic mapping in MM, when condition is not true and no files are generated I see a red flag message in XIP MONI, "split mapping created no message".
    I do not want this red flag message to come.
    I see this thread:
    Split mapping created.. No message exists
    My problem is the same, "nikhil a " said that he solved the problem creating a dummy message in Message Mapping, but I don't know how to do that. Someone could explain to me?
    I do not want to use BPM.
    Thanks
    Fabio Boni

    when condition is not true and no files are generated I see a red flag message in XIP MONI, "split mapping created no
    message".
    This is correct behavior i suppose.
    Check if you can verify the condition in the Receiver Determination itself so that the process will stop in the first step itself if Condition = false
    Even when you say that a dummy message is created, it is to be sent somewhere or if not send then again it may give an error.
    Lets see what experts have to suggest here.

  • How to red flag RFC Receiver errors in SXMB_MONI?

    Hi,
    I have searched the forum but could not find a complete solution so am asking here.
    Interface is File -> PI -> RFC to SAP
    The RFC raises an exception if any errors are detected during the posting.
    To check error handling I have changed the RFC in SAP to raise an exception. When testing the interface I get a chequered flag in SXMB_MONI though the Adapter Engine shows the RFC exception was raised.
    How can the RFC exception be red flagged in SXMB_MONI? I do not wish to use a BPM or alerts, my preference is to red flag in the monitor.
    The repository shows that the RFC has message types Response and Fault, can these be used in some way.
    Che

    Hi Che,
    your flow is asynchronous, therefore whenever an asynchronous message is leaving PI it will be successful from a view of PI. PI cant get any information about errors inside SAP ERP.
    If you want to have a error flag or an alert you need to design your flow synchronouns: File adapter works by default asysnchronous, therefore you would need to adapt it: Create a synchronous flow (never did that but could be possible) or create a BP receiving the asynchr file message and send synchr the RFC.
    Regards,
    Udo

  • BPM processing error

    Hi
    I did a N;1 scenario with BPM. It's a three file to file scenario. The status in SXMB_MONI is fine and no errors. The com channels are all green and activated. However,  target directory is not created. How do I figure out where error has happened ?
    I have used merge. Where can I check whether the files have merged successfully ? The out put doesn't have fields from all files. I want to check BPM and am not able to do it.
    Any inputs ?
    Regards

    Hi
    How do I figure out where error has happened ?
    Do you see any entry in MONI, if yes then scroll the message  to right and see if you see a Green or Red flag under outbound coloumn. Click on PE and check if you have any queue problem
    or you can open the SXMB_MONI_BPE, give the current date range and execute .. you will be able to see the  error and related information.click on the error and you can find an icon for graphic and log . see the flow in which step error is occuring.
    Make sure your configuration is done properly do a syntax check.
    Please let us know if your BPM is getting initiated or failing in the first receive step itself.
    Regards,
    Srinivas

  • Read payload for error messages and throw a red flag in SXMB_MONI

    Hello All,
    I am calling a synchronous web service from PI ccBPM and getting a response back to PI ccBPM itself.
    So the steps in BPM are receive(from CRM), sync step (to call web service) and a control step (to end the BPM process).
    The requirement is to check if error_list node in the response from web service call has a value in it and throw an error in SXMB_MONI so that they can easily identify how many messages errored out  out of thousands of messages.
    This is the response structure for web service if there are errors.
    <manageResponse>
      <result>
                    <ErrorList>
                        <object>
                            <hyatt>partnerupdate--NR</hyattt>
                            <Message />
                            <Operation>jukio</Operation>
                            <User>atuser</User>
                        </object>
                     </ErrorList>
    </result>
    </manageResponse>
    Again I only need to see if error_list is not empty and throw a red flag error in SXMB_MONI.
    Thanks
    Mike

    Hi Mich,
      In Response map when Error segment appear's fail the maping so that you can see the list of message in MONI. and do not need to put any conditions in MONI.
    I mean in your Respoinse when ERROR_LIST segment coman under that one manatory field you select and take that field length say 20 characters.
    source field->Substring (0,100) get the 100 characters from source in that case case from source it won't get 100 characters mapping will fail so that you can see the Error messages in SXMB_MONI.
      Finally what I am saying do the wrong condition mapping in the response mapping so that mapping will fail.
    Regards,
    Venu.

  • Outbound process red flag - how to restart?!

    Hi, well i tried in a previous post to get help but i guess it was a little misunderstanding.
    I have a well processed message but it's not being send to target system, so i get a red flag on column outbound status in SXI_MONI. It's like a system is not available but in this case it is.
    It is File to IDoc Scenario and be sure that i already checked SM59, SX1, SX2 and so on.
    Funny thing is that sometimes message is send properly - when CC read one file - but when it has to read >1 outbound status will be set to error for each message!
    has somebody any clue on this issue?!
    br!!

    Hi,
    it's a FILE2IDoc Scenario i am getting no error at all except of the red flag for outbound process. In detal-view of the message nothing is reported an even the CC-Monitoring is showing nothing because IDoc-Adapter is not part of the Adapter-Engine.
    That's the problem! Because a target systems is connected via VPN to the gateway of the XI. And when the VPN is not active, the message is not being transmitted. But in XI i connat restart it when VPN-Tunnel is active again.
    Any clue on how to restart?!
    br

  • Showing Red flag in Message Monitor

    Hi All,
    I am getting red flags in Message Monitor while send from SAP through RFC.
    If i click the flag, showing message "Column status could not process - Transaction Execution Terminated Upon Request"
    previously its worked properly. In last process we have send at a time 150 message to message listener, in that it has processed 100 messages successful and rest of them show in red flag.
    After that even i send single message also, its getting red flag.
    And how can we reprocess those messages
    Can anyone please let me know how to solve it.
    Thanks,
    Kind Regards,
    Praveen Reddy M
    Edited by: praveen2425 on Mar 7, 2012 8:17 AM

    Hi ,
    I have found that error where it has been terminating.
    I have kept condition action block below the sql insert query in my transaction as i am calling from Message process rule.
    Under condition action block, i have kept leftside SAP jco and rightside stop action block
    If the query successful execute it will trigger SAP jco, if not it will trigger stop transaction(i.e. In stop configure. link, mapped sql query success to TerminationMessage)
    The issues is,
    if i send 150 messages, its inserting all records in DB but in the transaction it triggering 100 messages to SAP Jco through condition after that its triggering stop action block. I don't no why its happen.
    In condition i have kept
    confg. object as 1 and radio button with or
    Confg link as sql query success with input1 propertie
    Any idea regarding this, why its triggering after sometimes even its successful executed.
    Thanks,
    Kind Regards,
    Praveen Reddy M

  • Error handling an evaluation process request. Cannot create process. NativeErrorCode:193

    Hi,
    I always get the following error. This happens every time I try to use Power Query to import data (even if I try to simply load a local CSV file).
    I can select the CSV file, or chose the desired online-search data source, but when the data should be pulled into Excel, I get "Error handling an evaluation process request. Cannot create process. NativeErrorCode:193"
    and I'm stuck.
    I have already tried to:
    execute Excel 2013 as Administrator
    connect directly to Internet (without the company proxy)
    Set “run as administrator” to all users on D:\Program Files (x86)\Microsoft Power Query for Excel\bin\Microsoft.Mashup.Container.exe
    I'm running Windows 8 Pro (64 bit), Office 365 ProPlus (32 bit) and
    PowerQuery_2.10.3598.81 (32-bit).
    Any suggestions?
    Thanks in advance,
    Marco

    Are you familiar with using tools like Process Monitor (aka procmon) for debugging? This error suggests to me that there's some kind of bad machine state that's interfering with the loading of the executable, and this kind of problem tends to be pretty hard
    to debug.
    Some of the easier things to do and check:
    1) Run "chkdsk /f" against each of your drives to ensure there are no disk issues.
    2) Enable tracing and send us the logs. There's a description for how to enable traces at
    http://social.technet.microsoft.com/Forums/en-US/7b04152f-b7fb-46a9-92be-860d46b48059/when-error-says-see-the-inner-exception-for-more-details?forum=powerquery
    3) Open up a command prompt (cmd.exe, not powershell), switch to "D:\Program Files (x86)\Microsoft Power Query for Excel\bin" and run Microsoft.Mashup.Container.exe to see if you get some kind of error message. The expected behavior of this application
    is that it will exit almost right away with no error.

Maybe you are looking for

  • Music app continues to have issues

    I posted about this issue months ago, but unfortunately the music app continues to have the same problem. On my phone, I continue to experience an issue where my saved playlists(ones I created on the phone) become disorganized. By disorganized, I mea

  • CC with external mail for RFQ and PO

    Dear All, Mails are triggered to the vendors for RFQ and PO. The Purchase department does not get any report or system confirmation if the mails are successfully triggered or not. Having a CC to the external mails would confirm that the mails have be

  • IPhoto claims pictures are missing, although they are displayed

    Suddenly, iPhoto starts acting weird on me. In some events when I click on the thumbnail of a picture, it is displayed but at the same time an error message is shown which claims the picture is missing. It prompts me to locate the picture, and if I d

  • Content has been indexed with Info only. Resubmit should only be performed

    Hi All, Im using the Oracle Content Server (OCS) , When im trying to checkin new document then i get the below mentioned error message can any one plz tell me that what is the problem. Error Message:_ Text conversion of the file failed. Content has b

  • No Photos to Import

    G5 PPC, OS 10.4.1.1, 8GB RAM, CS3 Images in HD folder can be opened in PS; when trying to Import into LR 2.3, get error "No photos to Import". In Import dialog, most, but not all, photos grayed out.  The images are definitely there!!