BPM  - Status always in "In Process"

Hi Experts,
I have implemented a simple BPM for a Message Split pattern - where the source message will be split into 10-2000 messages. And these messages are sent to target system using a ForEach block with Send step.
I'm facing two problems here...
1)  In some cases, Transformation step shows "Completed" status. However the container element (multiline) to hold the result of the transformation is not assigned with the result of the mapping. It remains empty forever. However when I check the result of the transformation step, I find the list of all split messages. What would cause the delay between the transformation step execution and the assignment of the result to container element?
2) When the number of target messages is high (say > 1500), in some cases, even after the completion of all the steps of the BPM, the root workitem still shows the status "In Process". Also the Process in SXMB_MONI shows Outbound Status as "Messages being Sent". I have checked the SMQ1 & SMQ2 and found no messages stuck there. The workflow log shows that all the messages have been sent. All the messages are also delivered to my target system. Why does the Workitem still show "In Process"? What would it be waiting for? The Send step is asynchronous and I have not configured it for taking acknowledgements. However if the number of target messages are less, the status is set to "Completed" correctly.
Note: I'm using Service Pack 13.
Regards,
Pradeep

Hi Pardeep,
Check this link for the same.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1db5e190-0201-0010-1c90-d9de570c6b18
Sachin

Similar Messages

  • BPM status is "IN Process" even after all the steps in BPM are completed

    Hi All,
    we have designed a BPM for collection of messages and have a transform step .
    In some cases all the steps in BPM get completed but the status of BPM is still in" In Process"  and in SWWL transaction the status is "Started".
    Even though the status is started we are able to get the desired output.
    Ideally after the steps in BPM get completed the status should be "Completed".
    please suggest why we are  getting this status and how can this be resolved.
    Thanks and Regards,
    Rajesh

    hi ,
    I am using a fork and loop with a condition to end this loop.the condition gets satsfied.
    The messages are coming out of the loop and fork but even then the status is in "InProcess"
    thanks,
    Rajesh

  • PO status always remains "AWAITING APPROVAL" - WF error

    Hi all,
    We are working on SRM 5.0 SP13 ,ECS.
    We have implemented the workflow WS14000145 for PO approval.Now when I perform a consistency check at SWUD for WFL  WS14000145,I get the foll errors:
    E.     WS14000146     POSub.n-Step Subworkflow N-Step for PO (BADI)
           I WD:017 No start events or start transactions/forms
           I WD:019 Container element ExcludedAgents is not used
    E.     TS14007959     POMAILSEND   Send Mail to Affected Parties/Purch
    E.     BUS2201                        APPROVED
           Binding warnings
           E SW:084 The object categories 'BO' (source) and 'CL' (target)ar
    E.     BUS2201                        REJECTED
           Binding warnings
           E SW:084 The object categories 'BO' (source) and 'CL' (target) ar
    How do I correct the above errors for the workflow?
    Also because of the above WF errors,I am unable to close some of the PO's .When I try to close the PO's(by checking the indicators "No further confirmations expected " and  "No further invoices expected " under Item data-->statistics),the indicators remain checked but the PO status always remains "AWAITING APPROVAL".When I click on the approval preview(graphical view),I see message "Error .click for details" and under table view ,I see "NO APPROVAL REQUIRED".
    In order to close the above PO's,is there any workaround or other way I can change the status of the PO temporarily to atleast be able to close the PO's?
    Please advise.

    Thanks Muthu!The note does seem relevant but I am still confused due to a new observation
    Another observation :
    The WF for PO approval is actually not activated in our system which means that this issue is not related to workflow .Additionally ,now I see some errors in the backend application monitor stating that "PO backend Transfer failed".
    So as Masa mentioned earlier,this issue could be more related to PO replication.I tried all ways to update the status for the PO and observed the foll:
    1. After running SW01,for the changed/latest  GUID of the PO,the PO header status did change to "ORDERED" but then under Item data-->statistics the indicator for confirmation was reset.When I tried to chekc the indicator to again close the PO,the PO header status again changed to "Awaiting Approval".
    2. Using FM  SWW_DLEETE_ITEM,deleted the work item(old) for the PO and tried to chnage the status as mentioned above.But the issue still remained.
    3.Tried to make the status "AWAITING APPROVAL" inactive by using FM "CRM_STATUS_UPDATE" but no success.In BBP_PD,the document status was updated(Awaiting approval inactive checked) but in the web portal,Under "Process Purcahse order" transaction,the PO header status still showed as "AWAITING APPROVAL"..
    Please advise.

  • Messages status always shows "offline"

    I have only updated my mid 2009 macbook pro to Yosemite.
    I have synced to my iPhone ok.
    My Messages status always shows "offline" on the MBP even though I can chat on it.
    Many thanks for any help.

    At the bottom of the left New Message box, you can change it there.

  • Order status is coming "Being Processed" after return delivery

    Helloo Experts,
    We have a current situation here, Where order type (OR) with item cat (TAN) creates SO then delievry (LF) happened and PGI..
    Due to some reasons the order needs to be void.Then the SO has been changed (VA02) by adding item cat YREN with same quantity, then delivery (LF) ,PGR and billing (F2).
    Now after final billing the order status coming as "Being processed" instead of "Closed" at the document flow.
    Does SAP standard practice supports this process flow OR it should be Return order (RE),Delivery (LR) and return of credit (RE)  to make the Order status  "Completed".
    Is there any other ways to make these order's status changed from "Being Processed" to "Completed"
    Waiting for some valuable inputs.
    Thanks
    SM

    Then the SO has been changed (VA02) by adding item cat YREN
        with same quantity, then delivery (LF) ,PGR and billing (F2).
    This process is wrong.  You have to create a new return sale order with reference to the parent billing document.  If billing has not been generated, then you have to reverse the delivery via VL09.
    G. Lakshmipathi

  • BPM ODATA Service to start process

    Hi,
    Can any one help how to use BPM Odata service to start process?
    Regards,
    Pavani

    Hi,
    try the following two blogs:
    The specified item was not found.
    Working with SAP NW BPM and SAPUI5: Using SAP NW BPMs OData-Services
    Best regards,
    Timo

  • BPM workspace doesnt find my process in Windows7.

    Hi All,
    I have installed BPM suite11.1.1.5 in both windows7 and in Linux environment.
    In Linux environment i could able to see the process in BPM workspace. However in Windows7, BPM workspace doesnt list my process.
    Is BPM suite11.1.1.5 not recommened for windows7 installation?
    Thanks
    Rajesh.

    Hi Desmukh,
    Jdev worked fine. I am taking about BPM workspace.
    I have installed BPM suite11.1.1.5 and deployed a BPM process. Next logged onto BPM workspace using admin user(weblogic), assigned a testuser to the process role.
    Now when i login to BPM workspace using testuser, I am unable to see the process listed in BPMworkspace.
    Thanks
    Rajesh.

  • Reg change in the status profile in the process order

    Dear all,
    By default one status profile ZPI0001 has been assigned to an order type ZP10 in a plant, the requirement is at the time of process order creation we want to change the status profile to ZPI0002 and create . this is applicable for one plant only
    Please let me know the settings to be done for that
    Thanks in advance
    Regards
    venkat

    HI Venkat,
    I am not sure why do you need different status profile at the creation of process order...
    First define the status profile ZPI0002 using Tcode BS01/BS02  and assign it  to the order type ZP10 using CORN. The same order type is defined to plant using COR4..Here you can only have only one status profile for each order type, however, you can define different custom user status for the status profile..Say ZOCL - Order Completely closed after system status TECO to stop all goods movements...You can't have separate status profile while creating process order and at other stage of process order..Gurus please correct me if I am wrong..
    Thanks
    Sree...

  • SC item still in status "Item in Transfer Process"

    Hello,
    We have some SC that are still in status "Item in Transfer Process". THey have no error but we don't get the R/3 document. In our case we must get Purchase Requisition but we have nothing. We can"t transfer manually the SC in the monitor because the button is disable for those SC. Can someone help us?
    Thanks.

    Hi
    Which SRM and R/3 versions are you using ?
    <b>Please have a look at the following OSS notes, which might help.</b>
    <u>550071 FAQ: EBP - Shopping Cart
    757625 Incorrect Status I1112->analysis report
    990767 Service: Name of requester not in back-end purchase order
    988490 Name of requester not in back-end purchase order
    755769 Status I1113, no item or header relations->analysis report
    958395 Termination during transfer from template
    890481 Cleaner job: Do not delete processed entries 
    772778 Creation of local PO from external requirement: => Alert
    140846 BBP: No purchase order generated although data complete
    751022 Monitor Shopping Cart: Item deletion causes termination 
    573493 ECS: Error for SC item without plants
    815721 Multiple transfers of shopping carts
    781260 Incorrect purchasing group for catalog item
    774596 Deleting shopping cart item: Items are transferred 
    610601 Shopping cart monitor: Check status after transfer
    765432 Shopping cart: Old PO / template with hierarchy
    753787 Monitor shopping cart: Shopping cart with deleted items
    729967 Shoppng cart:Status I1111,no follow-on docs->analysis report
    670346 Favorites from catalog: Price 0 during transfer
    623415 Shopping cart monitor: Icon / status for the shopping cart
    566546 No local procurement process with activated ECS 
    504831 Shopping cart: search help goods recipient from note 448598
    609610 Deleting incorrect shopping cart items in monitor and status
    534653 Shopping cart monitor: Display of deleted items
    486452 Unloading point in shopping cart
    580548 Shopping cart: BBP_DOC_CHANGE_BADI - account assignment data
    507278 Incorrect storage location in the shopping cart
    540635 SC: no BE doc., no message if error in recipient data
    522620 Shopping cart monitor: Customer enhancement / BADI
    519519 Shopping cart monitor: Deleting shopping cart/icon inactive
    513030 Description disappears after calling the input help
    499013 RZ20: No re-submit or deletion of items
    493478 Transfer the item from the catalog without account assignmnt
    432434 'Item in the transfer process' for reservations</u>
    Regards
    - Atul

  • SC status "item in transfer process".

    Hi experts
    My shopping cart was landed up with status "item in transfer process".
    Please explain how to delete this shopping cart.
    System admin tried to delete from monitor SC, but not deleted
    Any help will be appreciated.
    Regards,
    Suresh.A

    Hi,
    You can use the below FM's sequentialy to delete the SC, BUT KEEP IN YOUR MIND.. ONCE YOU EXECUTE THESE FM'S , YOU CANT SEE THE HISTORY IN BBP_PD.. THIS FM'S DELETE FROM DATABASE. I won't recommand if this is in production system
    BBP_PD_SC_DB_DELETE
    BAPI_TRANSACTION_COMMIT
    IF YOU WANT TO KEEP THE HISTORY OF SC , BUT WANT TO CHANGE THE STATUS
    TRY THE FM 'BBP_PD_SC_STATUS_CHANGE_DIRECT'..
    Saravanan

  • PO status in " error In Process ".

    Hi Experts,
    We have some POs that are stuck in SRM with status as " Error in Process ".
    The PO is got replicated to R/3.
    The Workflow Log is Completed.
    But in Follow-on Documents the status shows as " Error in Process ".
    Can you pl. guide me int his issue.
    Thanks & Regards
    Sachin

    Hi,
      We have the same type of problem in creating invoices for our SRM 5.0 decoupled scenario.
    The invoice is created and not shows any error and gives a completed message. But if we see follow-on documents it says as "Invoice -
    Error in Process"
    Do anybody has the same prob. solved.
    Kindly suggest from gurus.
    Sincerely,
    Sridhar.
    Message was edited by:
            P.T. Sridharbabu

  • Message stuck in SXMB_MONI  status " Sceduled for Outbound Process." Urgent

    Hello All,
    All messages in our XI environment are getting stuck with status Scheduled for Outbound Processing ...I have already done the following..
    1) Registered the Queues
    2) Deleted entries in SMQ1 and SMQ2  and restarted messages
    Last time we had this issue, we were finally able to reslove it by doing a J2EE restart.  But this has resurfaced again within a week, and this time even the restart is not working. 
    Do you think some parameter has been set incorrectly during the install ..
    Any help would be appreciated ..
    thanks
    Mayank

    Hey Mayank,
    Did you got JCO failure error for any of XI message before start of getting this error message?
    If so it's failing because of RFC connection problem...
    You need to go to Tcode : SM59 in your xi server
    check the TCP/IP Connections which is created while post-installation phase..
    1. AI_RUNTIME_JCOSERVER.
    2. AI_DIRECTORY_JCOSERVER
    Solution :  Increase the default value for CPIC_MAX_CONV (se note 314530).
    Hope this wull solve your problem.
    Nilesh

  • Diff Between Oracle BPM Studio and Oracle BPEL Process Manager

    1)What is the difference between Oracle BPM Studio and Oracle BPEL Process Manager?
    2)What is the connection between Oracle BPM Studio and Oracle BPEL Process Manager?

    Hi,
    As of today you should install SOA Suite 11g
    Fr this you will need to install Database (for development you can use XE)
    Run RCU utility to crete DB schemas for SOA Suite.
    Install Weblogic server
    Install SOA Suite as an option to Weblogic
    Create SOA Domain.
    It is physically possible to do it in 2GB but is far better on 3 - 4GB
    You can consider installing DB on different machine.
    Adam

  • Overall Status of order Being processed after complete PGI & Billing

    Dear All,
    Before writing this post i tried all possible solution available on SCN & internet.
    In sales order overall status (GBSTK) is Being processed after doing complete delivery and Billing.
    I tried many things changed the completion rule also run the program SDVBUK00 but the status is not updated to complete.
    Created 1 sales order with 1 material without any reference then done PGI for 1 material then done billing successfully.
    In table VBUK / VBUP the field GBSTK / GBSTA showing Being processed, for delivery and invoice its showing completed "C".
    I checked the Incompletion Log also there is nothing pending.
    Please refer screenshots and provide me solutions.
    Thanks in advance.
    Tarun Kumar

    There is no additional schedule line.
    I have taken 1 quantity and it confirmed.
    I change the completion rule also but no luck.
    Copy control screenshot-

  • Weblogic domain status always down from Fusion Middleware Console

    Hi Guys
    Weblogic domain status always down from Fusion Middleware Console but however my Webdomain is Up and running.
    At another level, I have the same problem with applications status. These applications are Up and running but visible status down too.
    Platform: AIX 5.3 TL8
    Weblogic Server: 10.3.2
    Fusion Middleware Controle: 11.1.1.2.0
    Any idea ?
    bests regards
    Denis Jeanneret

    Hi,
    I have similar setup and the WebTier component shows as down.
    After some research I have come to the conclusion that some files have been missed in the EM packaging with the Web Center and OHS components.
    Am following up with iAS development on this issue..
    Check
    http://<adminHost>:<adminPort>/dms
    Click on Aggregate Metrics > scroll down to opmn_response and opmn_response_component. See if the instance is registered.
    In my case, the opmn_response does not have the componentname in it but opmn_response_component seems to be fine.
    Regards
    Kotti

Maybe you are looking for