PO status in " error In Process ".

Hi Experts,
We have some POs that are stuck in SRM with status as " Error in Process ".
The PO is got replicated to R/3.
The Workflow Log is Completed.
But in Follow-on Documents the status shows as " Error in Process ".
Can you pl. guide me int his issue.
Thanks & Regards
Sachin

Hi,
  We have the same type of problem in creating invoices for our SRM 5.0 decoupled scenario.
The invoice is created and not shows any error and gives a completed message. But if we see follow-on documents it says as "Invoice -
Error in Process"
Do anybody has the same prob. solved.
Kindly suggest from gurus.
Sincerely,
Sridhar.
Message was edited by:
        P.T. Sridharbabu

Similar Messages

  • SRM PO Changes Error Status - Error in Process (SRM 4.0 and ECC 5.0)

    Hi All,
    I created PO in SRM from Sourcing (Shopping Cart) and it is replicated to Back End (ECC 5.0). But I did not post GR or Invoice Verication with reference to PO.
    When I am trying to change PO in SRM (SRM Webbrowser - Processing PO) like Quantity, I am receiving the PO status as Error in Process.
    Please let me know do I need to configure anything for this issue or need to implement OSS Note/BADI.
    Thanks a lot in advance for helping me.
    Best Regards,
    Sudarsan

    got solution

  • Error in Process status after confirmation

    Hi,
    when we post  confirmation in SRM for a particular PO it is showing the status as error in process.how can i check what is the probelm assocoiated with this confirmation.
    I went to Rz20 and got the Idoc.but when i tried to process it manually in WE19.it shows partner profile not maintained
    can any one suggest me what needs to be done
    regards
    subbu

    Hi Can you reproduce the same error in development?
    if so you can easily finda problem.
    hope it may be error in process state in confirmation.
    if you recreate this it helps.
    1. error in process
    2. again to create confirm - posted in a backend.
    it may or may not be isolated error. try to replicate in development with same data.
    muthu

  • How to clear status "Error in process"?

    Hi All,
    I need help to clear the status of my invoice in SRM. The invoice status is "error in process". We checked in backend and reprocessed the IDOC through WE19 instead of BD87 and the invoices are posted now in backend. But the status of the invoices still shows "error in process" in SRM. I do understand that we should not use WE19 and should have processed it through BD87.
    I checked in SRM and the enteries exists in BBP_DOCUMENT_TAB table for these invoices, just tried to run CLEAN_REQREQ_UP and BBP_GET_STATUS_2 but no help.
    Please help
    Thanks, Sachin

    please read all below
    An IDoc BBPIV is sent if an invoice is released in the BBP system.In the invoice the statuses I1022 "Release granted" and I1017 "In transfer" are set.In addition, for the background job (see below) an entry is written to table BBP_DOCUMENT_TAB.
    Unless I1017 is not set again to inactive, all previous operations are not allowed (in particular all changes to the invoice), that is, they are stopped by the program. The sending of the IDOC is checked by the background job CLEAN_REQREQ_UP. The report reads the BBP_DOCUMENT_TAB and makes a RFC (remote function call) per META_GOODSMVT_UPDATECHECK to check the posting of inbound IDocs.If the IDoc is posted successfully (status 53), the BBP invoice receives status I1018 "Transferred to backend".In addition, the entry is deleted in BBP_DOCUMENT_TAB.
    If the IDoc is posted incorrectly (status 51, no follow-on document), the status of the invoice is set to I1019 "Transfer failed".The entry in BBP_DOCUMENT_TAB remains as is, that is, the status of the IDOCs in the backend system is still checked by the background job.The sending of the IDOC is checked by the background job CLEAN_REQREQ_UP.If the IDoc has not (yet) arrived in the backend system, the entry also remains as is.
    Status I1018 allows to reverse the invoice in the future. In case of status I1019, a deletion is (again) possible.
    The following must be considered when processing an incorrect IDoc in the backend system:
    a) Further process the same IDoc (BD87), instead of copying and correct the IDoc with Transaction WE19 since in the latter case, the background job cannot find the (copied) IDoc and the invoice posted from that. In this case the BBP invoice would remain endlessly in status "incorrect", the entry in BBP_DOCUMENT_TAB would never be deleted and the background job would always make the RFC at every run.In addition the BBP invoice would never receive the status "paid" (see below).
    b) If the IDoc cannot be corrected or the error in the backend system cannot be solved, the IDoc remains in status "incorrect".In this case the BBP invoice should be deleted and the entry in BBP_DOCUMENT_TAB should be deleted manually or with a self-written report.
    Additional information: As of EBP Release 4.0 or after the implementation of Note 601470 or the import of the relevant Support Package, the entry in BBP_DOCUMENT_TAB is deleted by the program (during the deletion of the invoice). Then the manual deletion is no longer required.
    The following section does not correspondingly apply to the confirmation, but only applies to the invoice.
    Status I1020 "paid" is set in the invoice by using the second background job BBP_IV_UPDATE_PAYMENT_STATUS to check the payment status of the follow-on invoice in the FI backend system for all invoices from the selection area.This only occurs for BBP invoices with status I1018 "Transfer to backend". To read the FI documents, META_FI_DOCUMENT_READ_40B is used.

  • PO in Error to Process Status

    Hi
    In SRM4.0 ECS we have a peculiar issue.
    1. PO created in SRM with account assignment (cost Centre & GL Account).
    2. PO end up in "ERROR IN PROCESS" status.
    3. In SRM backed PO in T-Code:BBP_PD is showing as ORDERED but also "Transfer Failed (E.Sys.)" status "I1132".
    4. Such status occurs if there is error in account assignment
    5. We have verified the existence & correctness of cost centre & GL account.
    PO is hanging in SRM & not getting replicated to R/3.
    Thanks & Regards.
    Sandip.

    Thanks Nikhil for your reply.
    In RZ20 I am getting error due to account assignment, which I have validated that all things are in place correctly.
    My BBP_PD status as shows:
    HEADER     I1015          Awaiting Approval              X
    HEADER     I1021          Created
    HEADER     I1038          Complete
    HEADER     I1043          Ordered
    HEADER     I1080          In Transfer to Execution Syst. X
    HEADER     I1120          Change was Transmitted
    HEADER     I1132          Transfer Failed (E.Sys.)
    HEADER     I1180          Document Completed
    0000000001 I1021          Created
    But in SRM front end PO document status is "Error in Process".
    Regards.
    Sandip.
    Edited by: Saha Sandip on Jun 28, 2011 7:34 PM

  • Purchase Order  in SRM Error in process

    Hello ,
    We are using extended classic scenario . SRM 5.0 , ECC 6.0.
    There is a PO on SRM with status 'Error in Process ' in process .But I checked the line items of the POs. PO has been successfully created and also transfered to ECC for all the line items. In ECC too the PO is visible.
    Then why the status of the PO is not 'ordered' ? How can I do to change this status to 'ordered' ?
    Please let me know how to find out the root cause of the issue as well as how to resolve the same .
    Regards,
    Saurav

    HI,
    Could you please tell me, how did you solve this issue. I'm having the same type of issue.
    Creation of shoppingcart thro'MDM catalog. It is approved. Local Purchase order is not getting
    created because of the following error and it is not replicated to the ECC 6.0.
    in Application monitor in SRM 7.0 Portal screen.
    1. Backend error: Enter G/L Account
    2. Purchase order still contain faulty items.
    3. Issue with error showing Sum of Quantities >1.728< larger than total quantity
    PO Status is'error in process'
    Regards,
    Anjan

  • Error while processing SHPMNT in using big pack size 20 but not if 1

    Hi Experts,
    I am trying to to process status 64 SHPMNT IDocs via background job using program RBDAPP01.
    When I try to use Pack Size 20 (minimum preferred/suggested by SAP for better performance), I am encountering the status 54 error message "Processing terminated because not required or possible" when the SHPMNT IDocs are pointing to the same Shipment document.
    According to the error message:
    Processing of this IDoc is terminated because it is unnecessary or impossible. Reasons for termination may include:
    1. The IDoc appears twice in the IDoc packet you just processed
    2. The data included in the IDoc you entered does not provide unique identification of the application document concerned. For example, you enter the primary identification using field EXTI1. There could be two application documents with the same 'external identification 1'. In this case, there would be no way to tell which document should be changed.
    So, I got the idea of trying Pack Size 1 and it worked!
    So in conclusion, SAP (by default) does not allow processing of multiple SHPMNT IDocs referring to the same Shipment document in one packet.
    Is it possible to disable/turn off this check so that SHPMNT IDocs will be processed using Pack Size 20 even if they are referring to the same Shipment?
    Thanks and Regards,
    Ruix

    Hi Ruix,
    We are running to exactly similar problem, Can you please share how you have resolved this issue?
    Many thanks in advance!!!!
    Regards,
    Kumar

  • To remove Error in a Legacy Correction;  "Contains Errors In Process"

    Hi expert,
    I was trying to perform some action in my Legacy Correction and found out I have no authorization. Thus, a error came out, having the error message, red light, I quit the correction and came in again, it's still there, with System status "Contains Errors In Process".
    How to remove that?

    Hello
    Make sure that the following note is implemented on your system:
    1878100 - Posting termination in ME_UPDATE_DOCUMENT for table EKET
    BR
    Caetano

  • Processing status code error

    Hi all,
    What does processing status code "Error" indicate in rcv_headers_interface.There is no error message in po_interface_errors.There is nothing available in the log of Receiving Transaction Processor.Can someone guide me what exactly this means?
    Thanks in advance!!

    Hi Sandy;
    Please see below notes which could be helpful
    Resolving records stuck in the Receiving Transactions Interface [ID 50903.1]
    http://docs.oracle.com/cd/E19509-01/820-4390/ggtrm/index.html
    Regard
    Helios

  • PO Output is possible for SRM PO's in status Error in Process

    Hello All ,
    We have a requirement, where system should not process the PO output when the PO is in u201Cerror in transfer status u201C .
    While creating the PO -> If the SRM PO is in Error in Process status, output will be processed and its sent to vendor also.
    Since Error in Process status in business point of view consider as error free PO but fails to transfer the PO to back-end due to some technical or customization.
    While changing the PO -> if the SRM PO is in Error in Process, We can stop the process the output with the help of OSS Note 1324180 which has been already implemented.
    Can anybody tell me how can we achieve this . Any pointers. We have also tried with condition based output workflow start conditions also .but it couldnu2019t work .
    Thank you
    Bharathi

    Dear Expert,
    Please check in RZ20 what specific error is being shown and accordingly either error message can be changed to warning message or customization should be done so as to replicate the PO into backend.
    Thanks and Regards,
    Sathya Kumar.

  • PO status "ERROR in PROCESS" after confirmation

    Hello Experts,
    problem is :
    When i create Purchase order its successfuly gets replicated in the Backend as we are on ECS scenario.Now when i create Confirmation the confirmation is also successfully created in the backend system but PO status gets changed to "ERROR in PROCESS" . i check in RZ20 and error is : "Purchase order 2400002371: Transfer Failed; Resubmit" means Application error while updating purchase orders in the back-end system.
    I check my port settings and message type in partner profiles looks OK to me otherwise Confir mation will not cretae in the backend system but yes i can see its created and all my data is fine then why for all the Purchase order after creating confirmation status gets Change ?
    Thanks in advance
    Smriti

    Hi Smriti,
    Try executing the function module BBP_PD_PO_TRANSFER_EXEC_V2 using SE37 transaction by giving the header GUID of P.O.
    Please take the GUID from BBP_PD transaction by giving the P.O number as input and BUS2201 as transaction type.
    Please check the P.O status after executing the above function module.
    Is this happening for all P.Os once the confirmation is posted or for any specific P.Os (2 P.Os as mentioned by you).
    Let us know the outcome to help you further in resolving this issue.
    Regards,
    Teja

  • Status "ERROR IN PROCESS" for invoice

    Hi,
    we have an issue regarding invoice document.After posting the invoice document in SRM the status of the document should change, however the status of the invoice is error in process.
    Dont know why, we have maintained all the attriburtes in organizational plan, and in vendor group too.Can any one share or throw some light on this issue. We have created a SC with local material, PO, Confirmation, and invoice.Issue is only with invoice.Kindly share some knowledge to resolve this issue.
    Maximum points will be awarded.
    regards,
    IGA

    Hi,
    The invoice is created in SRM but it doesn't replicate, Have you checked the inbound IDOC in your backend (Tx we05)
    In the status segment you should see the error.
    I hope this help
    Best regards

  • Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

    Hi All
    I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Exception occurred - Error when starting work item 000000007031
    PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
    CREATE - Error when creating a component of type 'Step'
    CREATE_WIM_HANDLE - Error when creating a work item
    CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
    Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
    Points to be noted:
    1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
    2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
    Appreciate your valuable suggestions.
    Thanks
    Ragav

    Hi Ragav
    did you try to debug this? maybe something is missing in config of P&F?
    Since you are on 605, the following note would be there in your system....use it to debug:
    1422496 - Debugging background workflow tasks in HCM P&F
    This will help you find the root cause.
    regards,
    modak

  • Purchase Order with "Error in Process" status????

    We are currently using SRM 4.0 in an extended classis setup.  We have been live for appropriately 1 yr and half and I have noticed more and more Purchase Orders going into status "Error in Process" when a change (increase value, add line items, change name) has been performed on the PO and then the PO is approved.  The PO will sometimes show up in the SRM Administration Tab occassionaly but more than less they don't and we have to search for failed PO to find all the "error in Process" PO's.  I have had success with having the user just change something in the name of the PO and then re-order and the PO will then go into R3 but I was wondering is there something in the system other than having the user change the PO that I can do to push the PO into R3.  When we have similar issues with confirmation I run tcode SWO1 and use the GUID ID and click transfer to push it to the backend.  Is there anything I can do in the backend that will send the PO into R3 and update the status to Ordered giving there is no apparent error in the system?

    Hello Robert,
    We've been facing a similar issue (we are also in SRM 4.0 Extended Classic Scenario): Sometimes, when the user modifies a purchase order from SRM (for example, to add some new items), the purchase order replication to the backend failed.
    In the Application monitor, we had the following backend error:
    "Insert Cost Center for Item X"
    but the Cost Center value was correct (other items from the same purchase order had the same account assignment).
    We thought the problem was related to the function module in the backend which was changing the purchase order, so we put a SAP OSS Note.
    In this OSS note, SAP recommended us to implement note 1005615, and the problem was solved.
    Check if this note could be implemented in your backend.
    Hope this helps you,
    Regards.

  • Service entry sheet reversal document (Status: Error in process) List repor

    Hi,
    I have a requirement, to have or develop report which gives service entry sheet reversal documents (Status: Error in process),
    while investigation i found below options (not exactly meeting my requirement)
    1) Display and Process Confirmations Centrally >Document Category>reverse documents
    which giving all reversed document list (need only error list) and it is giving only my puchasign group list (need all purchasing group list)
    2) I can execute PPB_PD with BUS2203>status>I1019
    is there any way/possible option that i can execute a report of reversal service entry sheets which ststus :error in process"
    Thanks,
    Jai

    Hi Christian,
    Thanks for your reply.
    But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
    Also I have checked the time at which the cancellation was created and everything is in sync.
    How can i change the status of SES from 'Error in process' to 'posted in backend'?
    Please advise
    Thanks

Maybe you are looking for