BPS - How to filter a BPS layout based on keyfigure value.

Hi Gurus,
I am in a requirement to display a BPS layout based on a keyfigure value. Basically filter based on a keyfigure value. I don't want to display any records which contains a value of '0' in a particular keyfigure. Is this possible in BPS.
Thanks,
Mohan

thanks guys for your response.
The macro is not going to help me because the number of records from the database fetch is going to be more than 15000 and the valid records are only around 100. And since BPS cannot display more than 9999 records this would be a problem. This is my assumption. Let me try this out and see how BPS responses.
I tried using the exit function to delete the records from buffer with the condition if the keyfigure is 0 but the other keyfigures values are affect due to this. Meaning BPS keeps track of the changed records and changes the other keyfigure value to 0.
e.g. I have 2 keyfigure, A and B. A is the keyfigure where I check the value for 0 and B is the keyfigure with a non-zero value say $10. And in the exit before processing I have 10 records out of which 2 records are having value 0 for the A keyfigure and 8 records are having value as 1 for the A KeyFigure. And B keyfigure is having $10 for all the records. Based on the condition I delete off the 2 records from memory. SEM keeps track of this change and when you press on the save button in planning layout, the value for the B keyfigure are changed from $10 to $ -10 and saved to the database, I don't want this change in value to B keyfigure happening. So any other work arounds....
Thanks,
Mohan

Similar Messages

In BI how to filter the selection options based on inputs on top field

Hi Friends,
In BI, How to filter the selection options based on inputs on top field.
The system should automatically filter the lower level drop downs based on the selection of a higher level.
For e.g. :
If a user selects a Country then the States drop down should only display the State's belongs to the Country. Similarly when a State is selected, the District drop down should display only those District's belongs to the State.
Thanks in Advance.
Regards
Jayaram M

Hi Anil,
Thanks for reply but I couldn't use Compounding Characteristic here. Need some other solution.
Regards
Jayaram M

How to construct a standard rowKeyStr based on a value passed to a method ?

Hi to all im on a proyect and i really appreciate some people can help with this
looking ADF joins all use rowKey values and i need to know how to generate a standard rowKeyStr based on a value passed to an event, so it let me access any page on my Jsp ADF application and pass some values to a method and get the rowKeyStr.
i have this method actually getting the current row, how i can generate a standard rowKeyStr value.
public String myrowKeyStr(String id) {
if (id != null) {
PbeVisitasViewImpl vo = (PbeVisitasViewImpl)getPbeVisitasView1();
Key k = new Key(new Object[]{id});
Row[] found = vo.findByKey(k,1);
vo.setCurrentRow(vo.findByKey(k,1)[0]);
return someRowKeyStr;
}

once you do the
Key k = new Key ( new Object[] { p1 } );
The rowkeystring comes from:
String strRowKeyStr = k.toStringFormat();
Just type k. and press ctrl-space to see the list of methods.

How can we restrict EQL result based on session value

How can we restrict EQL result based on session value or by checking with EBS secured function?
Example: I create a Item Search Dashboard but I have more than one inventory organizations and I want to restrict dashboard to bring inventory org respective data by validating responsibility/profile option.
Can anyone help me on this or if my concept is wrong so can anyone please guide me?

Hi Bob,
Thank you. Sorry for the late reply but I was busy in other stuff. I did the jar file and copied that Jar file into .ear/APP-INF/lib and copied on server and updated the df.securitymanager property under framework settings on Endeca Studio and restarted Endeca Server and Studio but seems like my class didn't get read. Kindly suggest and find below snippet of code;
public void applySecurity(PortletRequest request, MDEXState mdexState, Query query)
throws MDEXSecurityException
init(request);
String remoteUser = request.getRemoteUser();
String recordFilterExpression = "XX";
if(recordFilterExpression != null) {
DataSource ds;
try {
ds = new DataSource(request, mdexState.getId());
try {
ExpressionBase expression = ds.parseLQLExpression("FND_USER_NAME='" + remoteUser + "'");
DataSourceFilter dataSourceFilter = new DataSourceFilter(expression);
} catch (Exception f) {
throw new MDEXSecurityException("Unable to apply Expression", f);
} catch (DataSourceException e) {
throw new MDEXSecurityException("Unable to create DataSource", e);

How to retrive new logical column based on flag values in table.

Hi,
i have two tables in rpd
1.file table contains the coulmns------->date,file_count,record_count,cldm_stg,cmsa_stg,archive_stg
2.rejection table columns---------> are same as above
both have same common columns.my requirement is publish a dashboard like:
date | land_files count |alnd_recordscount| target_files count|target_records count|Rejection filecount|rejection record count
These report ineed retrive from those two tables.based on flag values.taget countcomes when all stg values set to ='y'
i.e(cldm_stg='y' and cmsa_stg='y'and archive_stg='y') if not then it will be in rejection file.
Please give solution how to achive my output.
nQSError: 14026] Unable to navigate requested expression: Target_record:[DAggr(FILE_CONTROL.Target_record by [ FILE_CONTROL.FILE_NAME, REJECTED_FILES.FILE_NAME, REJECTED_FILES.NO_OF_ROWS, File_landing.NO_OF_ROWS, File_landing.FILE_LOAD_DATE] SB FILE_CONTROL)]. Please fix the metadata consistency warnings. (HY000)
Edited by: user8767586 on Jan 12, 2010 4:29 AM

Tanks for ypur reply .only two tables are there named as above.i taken file_control as a fact table.
and i create one new tablecalled target in bmm layer taking logical source as file_control(fact table). and iset the where clause for the new table.and i create a new measure called target_file and target_records.in where clause my query is like
dwbidb."".AUDIT_PROD.FILE_CONTROL.ARCHIVE_STATUS = 'Y' AND dwbidb."".AUDIT_PROD.FILE_CONTROL.CMSA_STATUS = 'Y' AND dwbidb."".AUDIT_PROD.FILE_CONTROL.LND_STATUS = 'Y' AND dwbidb."".AUDIT_PROD.FILE_CONTROL.SCRIPT_STATUS = 'Y' AND dwbidb."".AUDIT_PROD.FILE_CONTROL.STG_STATUS = 'Y'
please tell me if this is right way to achive mt report. and tell me difference between fragmentation and whereclause.for my requrement i ahve to follow which method either fragmentation or whereclause.and in rpd there are no errors and warnings.but in answers i get a follwing error
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: TARGET_FILECOUNT:[DAggr(TARGET.TARGET_FILECOUNT by [ TARGET.FILE_NAME] SB TARGET)]. Please fix the metadata consistency warnings. (HY000)
SQL Issued: SELECT TARGET.FILE_LOAD_DATE saw_0, TARGET.TARGET_FILECOUNT saw_1, TARGET.TARGET_FILECOUNT saw_2 FROM AUDIT_PROD ORDER BY saw_0.
Please tell me to achive my report.
Regards
Edited by: user8767586 on Jan 12, 2010 5:21 AM
Edited by: user8767586 on Jan 12, 2010 5:21 AM
Edited by: user8767586 on Jan 12, 2010 5:24 AM

How do I change the query based on parameter value

hi,
Based on parameter value I want to change my query. If paramter value is 'O' i want the 'order by depno' in query if the value is null i don't want the order by clause.
How do I achieve this.
Thanks
Ram

U can use lexical parameter
i.e u create one user parameter and in query
u use this parameter with &param_name
ex.
select val,prize from stock where sr_no > :srno
orderby &ord_by
here ord_by is lexical parameter
and set its intial value to 'sr_no'
so u can get result order by sr_no
this parameter is set from form so u will give condition in form and depending
on condition u will pass this parameter from form.

How to Visible/Hide an Item based on the value of another Item

Hi
I need to visible and hide a textitem based on the value of another item.This form has 3 blocks, and the both item is in the first Master Block.
My code is:
if :RECORDTYPE=7 then
     Set_Item_Property('BLOCK.ITEM',VISIBLE,PROPERTY_TRUE);
     Set_Item_Property('BLOCK.ITEM',ENABLED,PROPERTY_TRUE);
ELSE
     Set_Item_Property('BLOCK.ITEM',VISIBLE,PROPERTY_FALSE);
Set_Item_Property('BLOCK.ITEM',ENABLED,PROPERTY_FALSE);
:BLOCK.ITEM:=NULL;
end if;
I wrote the code in the Validate Trigger, but not working when moving Next Record & Previous Record
Thanks in advance
Rizly

Read the 'Propagation of Property Changes' section towards the end of the page for Set_Item_Property in the online help. I'm not sure what you mean by locking automatically but perhaps it's because of this.
You should also ensure the item you're setting to invisible is not the current item (check :system.cursor_item and go to a different item if necessary).

BPS: How to filter Lead Columns at run time

I need to know if there is a way to filter values for lead columns, after planning level and planning package where defined
Example:
Family | Material | Brand | Format | sales | cost | Margin
F1      M1         B1      F1       100     80     20
F1      M2         B1      F1        95     85     10
F1      M2         B1      F2       105     90     15
In this case the user wants to add 10% to sales and review how does it impact into margin, but he wants to apply it only to rows where Material is M1.
So, he needs to use some kind of filter data (like Excel functionality) to select only the rows corresponding to material M1.
After that, he wants to perform other filters over the other lead columns, and apply again some changes in the data columns.
Somebody can help me with this requirement?
Thanks in advance
Message was edited by: Pamela Valdivia

Hi Pamela,
First of all you would need a variable for Material with Replacement type user defined values to be able to restrict the data for Material M1 when the layout is executed.
For incrementing the sales by 10% you can create a Planning function which increases the sales amount by 10% and provide a button for the same in the User Planning Folder. You could also restrict the Planning function for Material M1 if you so desire.
The benefit of the Planning function is that you can always "Undo" the operation if you have not saved/performed a subsequent operation. So as long as the user is applying some changes and undoing the same before the second change step the data is as it is, and for what changes the user would like to simulate you can create a Planning function and provide the option in the Planning folder.
Hope it helps.
Cheers
Anurag

How to setup Multiple report layouts based on parameter selection

I'm trying to create a report that will be based on the parameter values a user select. There will be 3 different layouts for the report.
Customer
Salesperson
Category
If the user selects one of the three a different layout will be displayed.
This is probably a simple solution but my Reports 6i skills are a little rusty.
Your advise would be appreciated.

Ok so you have a parameter form, and some parameters. In the data model, you can put your 3 queries. In the layout, as Ino said, put all 3 frames that you could possibly have.
The way I would use to choose which query to use is below. Others may have other methods, but I like this.
Ok lets say you have query A,B,C for simplicity. You have one parameter (P_PARAM1) on the form, and the user can choose A,B or C. Based on the parameter, you choose which query to use.
In query A, you would add this line to the where statement:
and :P_PARAM1 = 'A' You add the same lines to queries B and C, but change the letter obviously. So if the user enters A, it will only run query A because that was the parameter selected.
Now for the layout, click on the frame that corresponds with group/query A. You would click F11 or launch the PL/SQL editor, and add the following format trigger (or something similar).
function F_GRP_A return boolean is
begin
IF :P_PARAM1 = 'A' then
return (TRUE);
ELSE
return (FALSE);
END IF;
end;Ok - then add that same logic to Frame B and C, and based on the parameter it will hide or show the frame.
Hope that helps - thats a basic way to do what you're looking for!

How to filter messages in XI (IE) using Payload value

Hi XI/PI experts,
I just would like to ask if there is a way in filtering messages using only a value in the payload?
In SAP R/3 system, we can use we09 for searching. In XI, do we have any transaction that can substitute the transaction we09?
This is because, when a message is coming from JMS or File adapter, there is no means of filtering it via IDoc number. We can only filter it using sxi_monitor (via Interface/Receiver/Sender). However, if I am looking for a particular Order/delivery, it is hard to find this because I have to open one by one the messages and then look into the payload.
I hope there is an easier way to filter messages per field value.
Thanks in advance.

Hy Mary !
        One solution is using TRex to index the XML messages processed by XI, like mentioned in the above messages, and another way is to write a ABAP program to make this work.
        You can find a sample ABAP code to do this at this link:
http://209.85.215.104/search?q=cache:JOwoNxe-F-0J:searchsap.techtarget.com/tip/0,289483,sid21_gci1273424,00.html+IF_XMS_MESSAGE&hl=pt-BR&ct=clnk&cd=3&gl=br
        It´s very useful. I did take this sample and did make some adjustements(add more filtering parameters, etc) and created another program, that will be used in the customer where I´m working now. I think that this solution is not so fast than using the indexes of TRex but, it works well, and doesn´t require license nor server/infrastructure to install a TRex. Maybe you have to consider TRex, if the message processing volume at your site is very big, something like more than 50.000 messages/hour.
        I hope that this link helps you !
        Best regards,
        Wilson

Data Merge - Is there a way to selectively hide rows/columns from layouts based on cell values?

I'm using data merge to generate pages from a product spreadsheet. The complication is, some columns should exist for some products (like "qty per bundle") but need to be hidden for others. Is there a way for InDesign to automatically include or remove rows for some pages but not others, based on something like "qty = 0"?

For logic-based data merge, I use Em Software's product InData.
Depending upon the design, ID's merge can remove blank fields thereby removing there paragraph or position on a line. Unless, of course, you have static text along with it. Which I almost always do. that's why I use Em Software's solution. It has a trial version. One needs to get familiar with the language statements. But for me it was worth the price and learning curve.
And there are other plug-ins but for "simple" merging they are overkill in my circumstances (and so cost more).
Mike

How do i show a button based on the value of another button (value is greater then 0)

I'm am building a form in indesign, and just want to add a visual icon next to buttons when they are filled out... check mark next to a drop down list... so the list have values and i want the check mark (button) to show only when the value of the drop list is greater then 0... can this be done?... easily?....
thank you!

Hey Gilad D,
its been a while since i have been back to this project…..
now i have time to dedicate to this to get it done….
if you don't mind i really could use a little help..
i want to start again and give you the full scope of what i am trying to do, i don't have any real hard files yet...
its pretty simple (in theory)..
So i don't know what you do for work, but i work in an environment that has some pretty lazy sales people,
so i want to create a pdf that steps them through a bunch of questions that they have to answer...
my thought was, lets break this out into sections…
so section one has three questions, if they answer all three, then they get a checkmark and section 2 appears
which would have a few questions in it… etc….
there would be some easy cross referencing and excel type calculations,… and a few, if you answer yes then another field gets auto filled..etc….
can acrobat handle this?… or am i wasting time thinking it can?...
i primarily work on mac's but we do have a PC with live cycle...
thoughts?….
thank you,
ely

How to pass a value to a filter prompt based on a value list?

I have a query that has a filter prompt that is based on a value list. I want to call this query from another query as a drill down.
So I build the URL to call the query and pass the value for the filter prompts as URL parameters. For the filter prompts that are simple text fields this works without problems, but how do I pass a value to the filter prompt that is based on the value list?
I tried passing
<parameterName>=<valueListId>:616:null
and that gives me "None" for the value list prompt as expected.
I then tried to pass the DisplayName (as I would do when setting a default value for the prompt).
Like this:
<parameterName>=<displayName>
but that does not work.
I also tried some variations/combinations like
<parameterName>=<valueListId>:616:<displayName>
but that does not work either.
So does anybody know how to pass a parameter to the value list prompt?

Hi Martin,
I saw the following post which may help answer your question.
How to default a Value List or Object Picker to a particular value
Regards,
Reshma

ADF Table cell color based on the value in that field

Dear All,
I want to create a table for our new application which contains a table used to represent the data in a chart format or matrix format,
and each cell of the table should be filled with a colour out of three colors, based on the value belongs to which range eg:(1-8 ->green, 9-20 - yellow etc),
I dont know how to implement this. Please help...
Ranjith

Check this out.
How to highlight ADF table row based on column value?
-Arun

CAML Query to get specific item in folder based on dropdown value using Javascript client object model

Hi,
I am using the Javascript Client object model.
I have a custom list and a custom document library.
Custom list contains 2 columns - dlName , dlValue
The document library contains 2 folders - "folder1" , "folder2" and contains some images.
The image name starts with the "dlValue" available in the custom list
I am using a visual webpart and using javascript client object model.
I am trying to achieve the below functionality:
1) Load a dropdown with the custom list.
2) set the image based on the value in dropdown.
I have achieved the first option, I have set the dropdown, but not sure how to query the folder and set the image.
Below is the code i have used so far:
//In Visual webpart
<select id="ddlTest" >
</select>
<br/>
<div id="PreviewLayer">
<img id="imgPlaceHolder" runat="server" alt="Image" title="imgPlaceHolder" src=" " />
</div>
// In Javascript file
function RenderHtmlOnSuccess() {
var ddlTest = this.document.getElementById("ddlTest");
ddlTest.options.length = 0;
var enumerator = this.customListItems.getEnumerator();
while (enumerator.moveNext()) {
var currentItem = enumerator.get_current();
var dropdownValue = currentItem.get_item("dlValue");
ddlTest.options[ddlTest.options.length] = new Option(currentItem.get_item("dlName"), dropdownValue);
setImage(dropdownValue); // Not sure how to query the folder and set the image based on value.
// Also if dropdown value is changed, corresponding image should be shown
How to query the folder and based on dropdown value, show the image? Also, how to handle the dropdown value change?
Thanks

Hi,
Here are two links for your reference:
Example of how to Get Files from a Folder using Ecmascript \ Javascript client object model in SharePoint 2010
http://sharepointmantra.wordpress.com/2013/10/19/example-of-how-to-get-files-from-a-folder-using-ecmascript-javascript-client-object-model-in-sharepoint-2010/
SP2010 JSOM Client Object Model: How to get all documents in libraries including all folders recursively
http://sharepoint.stackexchange.com/questions/70185/sp2010-jsom-client-object-model-how-to-get-all-documents-in-libraries-including
In SharePoint 2013, we can also use REST API to achieve it.
http://msdn.microsoft.com/en-us/magazine/dn198245.aspx
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

BPS - How to filter a BPS layout based on keyfigure value.

Similar Messages

Maybe you are looking for